Development of Biodegradable Osteopromotive Citrate-Based Bone Putty.

The burden of bone fractures demands development of effective biomaterial solutions, while additional acute events such as noncompressible bleeding further motivate the search for multi-functional implants to avoid complications including osseous hemorrhage, infection, and nonunion. Bone wax has been widely used in orthopedic bleeding control due to its simplicity of use and conformation to irregular defects; however, its nondegradability results in impaired bone healing, risk of infection, and significant inflammatory responses. Herein, a class of intrinsically fluorescent, osteopromotive citrate-based polymer/hydroxyapatite (HA) composites (BPLP-Ser/HA) as a highly malleable press-fit putty is designed. BPLP-Ser/HA putty displays mechanics replicating early nonmineralized bone (initial moduli from ≈2-500 kPa), hydration induced mechanical strengthening in physiological conditions, tunable degradation rates (over 2 months), low swelling ratios (<10%), clotting and hemostatic sealing potential (resistant to blood pressure for >24 h) and significant adhesion to bone (≈350-550 kPa). Simultaneously, citrate's bioactive properties result in antimicrobial (≈100% and 55% inhibition of S. aureus and E. coli) and osteopromotive effects. Finally, BPLP-Ser/HA putty demonstrates in vivo regeneration in a critical-sized rat calvaria model equivalent to gold standard autograft. BPLP-Ser/HA putty represents a simple, off-the-shelf solution to the combined challenges of acute wound management and subsequent bone regeneration.

The Association Between Well-Being and Empathy in Medical Residents: A Cross-Sectional Survey.

Objective: To evaluate the extent to which personal well-being may be associated with empathy, while controlling for potential confounders. Settings/Location: Residency programs throughout the United States. Subjects: A total of 407 medical residents from residencies including general medicine, surgery, specialized and diagnostic medicine participated in this study. Outcome Measures: Well-being was measured using the modified existential well-being subscale of the spiritual well-being scale. Empathy was measured using the Jefferson Scale of Empathy. Results: Well-being was found to be positively correlated with empathy when adjusted for possible confounders (p < 0.001). In addition to well-being, other factors noted to be statistically significant contributors to higher empathy scores while controlling for the others included age, gender, year in residency, specialty, and work-hours (p < 0.05 for each). After controlling for these factors, a resident's year in residency was not found to be a statistically significant contributor to empathy score. Conclusions: In this study, well-being was associated with empathy in medical and surgical residents. Empathy is a fundamental component of physician competency, and its development is an essential aspect of medical training. These findings suggest that efforts to increase well-being may promote empathy among medical residents.

Longitudinal Cadaver-Based Training Curriculum for Musculoskeletal Ultrasound-Guided Procedures Among Physical Medicine and Rehabilitation Residents.

ABSTRACT: Musculoskeletal ultrasound has become a fundamental diagnostic and treatment tool in the field of physical medicine and rehabilitation. However, there is no standardized curriculum for teaching and practicing musculoskeletal ultrasound during physical medicine and rehabilitation residency. The objective of this study was to describe a longitudinal curriculum using unembalmed fresh frozen cadavers to teach physical medicine and rehabilitation residents ultrasound-guided procedures. This protocol can help guide residents to begin learning how to independently identify important musculoskeletal structures and perform some of the most common musculoskeletal procedures relevant to clinical practice. Residents performed a procedure on average 6.99 times per block, and residents' self-reported confidence in various aspects of ultrasound practice significantly improved after this curriculum ( P < 0.005). Hence, a cadaver-based training curriculum may be a worthwhile tool for preparing physical medicine and rehabilitation residents to perform musculoskeletal ultrasound-guided procedures in the clinical setting.

Injectable drug-eluting elastomeric polymer: a novel submucosal injection material.

BACKGROUND: Biodegradable hydrogels can deliver therapeutic payloads with great potentials in EMR and endoscopic submucosal dissection (ESD) to yield improvements in efficacy and foster mucosal regeneration. OBJECTIVE: To assess the efficacy of an injectable drug-eluting elastomeric polymer (iDEEP) as a submucosal injection material. DESIGN: Comparative study of 3 different solutions by using material characterization tests and ex vivo and in vivo porcine models. SETTING: Academic hospital. INTERVENTIONS: Thirty gastric submucosal cushions were achieved with saline solution (0.9%), sodium hyaluronate (0.4%), and iDEEP (n = 10) in ex vivo porcine stomachs. Four porcine gastric submucosal cushions were then created in vivo by using iDEEP. MAIN OUTCOME MEASUREMENTS: Maximum injection pressure, rebamipide release rate, submucosal elevation duration, and assessment of in vivo efficacy by en bloc resection. RESULTS: No significant difference in injection pressures between iDEEP (28.9 ± 0.3 psi) and sodium hyaluronate (29.5 ± 0.4 psi, P > .05) was observed. iDEEP gels displayed a controlled release of rebamipide up to 2 weeks in vitro. The elevation height of iDEEP (5.7 ± 0.5 mm) was higher than that of saline solution (2.8 ± 0.2 mm, P < .01) and sodium hyaluronate (4.2 ± 0.2 mm, P < .05). All EMR procedures were successfully performed after injection of iDEEP, and a large gel cushion was noted after the resection procedure. LIMITATIONS: Benchtop, ex vivo, and nonsurvival pig study. CONCLUSIONS: A novel injection solution was evaluated for endoscopic resection. These results suggest that iDEEP may provide a significant step toward the realization of an ideal EMR and endoscopic submucosal dissection injection material.

A Rheological Study of Biodegradable Injectable PEGMC/HA Composite Scaffolds.

Injectable biodegradable hydrogels, which can be delivered in a minimally invasive manner and formed in situ, have found a number of applications in pharmaceutical and biomedical applications, such as drug delivery and tissue engineering. We have recently developed an in situ crosslinkable citric acid-based biodegradable poly (ethylene glycol) maleate citrate (PEGMC)/hydroxyapatite (HA) composite, which shows promise for use in bone tissue engineering. In this study, the mechanical properties of the PEGMC/HA composites were studied in dynamic linear rheology experiments. Critical parameters such as monomer ratio, crosslinker, initiator, and HA concentrations were varied to reveal their effect on the extent of crosslinking as they control the mechanical properties of the resultant gels. The rheological studies, for the first time, allowed us investigating the physical interactions between HA and citric acid-based PEGMC. Understanding the viscoelastic properties of the injectable gel composites is crucial in formulating suitable injectable PEGMC/HA scaffolds for bone tissue engineering, and should also promote the other biomedical applications based on citric acid-based biodegradable polymers.

Scaffold Sheet Design Strategy for Soft Tissue Engineering.

Creating heterogeneous tissue constructs with an even cell distribution and robust mechanical strength remain important challenges to the success of in vivo tissue engineering. To address these issues, we are developing a scaffold sheet tissue engineering strategy consisting of thin (∼200 µm), strong, elastic, and porous crosslinked urethane-doped polyester (CUPE) scaffold sheets that are bonded together chemically or through cell culture. Suture retention of the tissue constructs (four sheets) fabricated by the scaffold sheet tissue engineering strategy is close to the surgical requirement (1.8 N) rendering their potential for immediate implantation without a need for long cell culture times. Cell culture results using 3T3 fibroblasts show that the scaffold sheets are bonded into a tissue construct via the extracellular matrix produced by the cells after 2 weeks of in vitro cell culture.

A new generation of sodium chloride porogen for tissue engineering.

Porogen leaching is a widely used and simple technique for the creation of porous scaffolds in tissue engineering. Sodium chloride (NaCl) is the most commonly used porogen, but the current grinding and sieving methods generate salt particles with huge size variations and cannot generate porogens in the submicron size range. We have developed a facile method based on the principles of crystallization to precisely control salt crystal sizes down to a few microns within a narrow size distribution. The resulting NaCl crystal size could be controlled through the solution concentration, crystallization temperature, and crystallization time. A reduction in solution temperature, longer crystallization times, and an increase in salt concentration resulted in an increase in NaCl crystal sizes due to the lowered solubility of the salt solution. The nucleation and crystallization technique provides superior control over the resulting NaCl size distribution (13.78 ± 1.18 µm), whereas the traditional grinding and sieving methods produced NaCl porogens 13.89 ± 12.49 µm in size. The resulting NaCl porogens were used to fabricate scaffolds with increased interconnectivity, porous microchanneled scaffolds, and multiphasic vascular grafts. This new generation of salt porogen provides great freedom in designing versatile scaffolds for various tissue-engineering applications.

Synthesis and characterization of a biodegradable elastomer featuring a dual crosslinking mechanism.

The need for advanced materials in emerging technologies such as tissue engineering has prompted increased research to produce novel biodegradable polymers elastic in nature and mechanically compliant with the host tissue. We have developed a soft biodegradable elastomeric platform biomaterial created from citric acid, maleic anhydride, and 1,8-octanediol, poly(octamethylene maleate (anhydride) citrate) (POMaC), which is able to closely mimic the mechanical properties of a wide range of soft biological tissues. POMaC features a dual crosslinking mechanism, which allows for the option of the crosslinking POMaC using UV irradiation and/or polycondensation to fit the needs of the intended application. The material properties, degradation profiles, and functionalities of POMaC thermoset networks can all be tuned through the monomer ratios and the dual crosslinking mechanism. POMaC polymers displayed an initial modulus between 0.03 and 1.54 MPa, and elongation at break between 48% and 534% strain. In vitro and in vivo evaluation using cell culture and subcutaneous implantation, respectively, confirmed cell and tissue biocompatibility. POMaC biodegradable polymers can also be combined with MEMS technology to fabricate soft and elastic 3D microchanneled scaffolds for tissue engineering applications. The introduction of POMaC will expand the choices of available biodegradable polymeric elastomers. The dual crosslinking mechanism for biodegradable elastomer design should contribute to biomaterials science.

Citrate-Based Biomaterials and Their Applications in Regenerative Engineering.

Advances in biomaterials science and engineering are crucial to translating regenerative engineering, an emerging field that aims to recreate complex tissues, into clinical practice. In this regard, citrate-based biomaterials have become an important tool owing to their versatile material and biological characteristics including unique antioxidant, antimicrobial, adhesive, and fluorescent properties. This review discusses fundamental design considerations, strategies to incorporate unique functionality, and examples of how citrate-based biomaterials can be an enabling technology for regenerative engineering.

Citrate-based biphasic scaffolds for the repair of large segmental bone defects.

Attempts to replicate native tissue architecture have led to the design of biomimetic scaffolds focused on improving functionality. In this study, biomimetic citrate-based poly (octanediol citrate)-click-hydroxyapatite (POC-Click-HA) scaffolds were developed to simultaneously replicate the compositional and architectural properties of native bone tissue while providing immediate structural support for large segmental defects following implantation. Biphasic scaffolds were fabricated with 70% internal phase porosity and various external phase porosities (between 5 and 50%) to mimic the bimodal distribution of cancellous and cortical bone, respectively. Biphasic POC-Click-HA scaffolds displayed compressive strengths up to 37.45 ± 3.83 MPa, which could be controlled through the external phase porosity. The biphasic scaffolds were also evaluated in vivo for the repair of 10-mm long segmental radial defects in rabbits and compared to scaffolds of uniform porosity as well as autologous bone grafts after 5, 10, and 15 weeks of implantation. The results showed that all POC-Click-HA scaffolds exhibited good biocompatibility and extensive osteointegration with host bone tissue. Biphasic scaffolds significantly enhanced new bone formation with higher bone densities in the initial stages after implantation. Biomechanical and histomorphometric analysis supported a similar outcome with biphasic scaffolds providing increased compression strength, interfacial bone ingrowth, and periosteal remodeling in early time points, but were comparable to all experimental groups after 15 weeks. These results confirm the ability of biphasic scaffold architectures to restore bone tissue and physiological functions in the early stages of recovery, and the potential of citrate-based biomaterials in orthopedic applications.

Development of Injectable Citrate-Based Bioadhesive Bone Implants.

Injectable bone implants have been widely used in bone tissue repairs including the treatment of comminuted bone fractures (CBF). However, most injectable bone implants are not suitable for the treatment of CBF due to their weak tissue adhesion strengths and minimal osteoinduction. Citrate has been recently reported to promote bone formation through enhanced bioceramic integration and osteoinductivity. Herein, a novel injectable citrate-based mussel-inspired bioadhesive hydroxyapatite (iCMBA/HA) bone substitute was developed for CBF treatment. iCMBA/HA can be set within 2-4 minutes and the as-prepared (wet) iCMBA/HA possess low swelling ratios, compressive mechanical strengths of up to 3.2±0.27 MPa, complete degradation in 30 days, suitable biocompatibility, and osteoinductivity. This is also the first time to demonstrate that citrate supplementation in osteogenic medium and citrate released from iCMBA/HA degradation can promote the mineralization of osteoblastic committed human mesenchymal stem cells (hMSCs). In vivo evaluation of iCMBA/HA in a rabbit comminuted radial fracture model showed significantly increased bone formation with markedly enhanced three-point bending strength compared to the negative control. Neovascularization and bone ingrowth as well as highly organized bone formation were also observed showing the potential of iCMBA/HA in treating CBF.

Click chemistry plays a dual role in biodegradable polymer design.

Click chemistry plays a dual role in the design of new citrate-based biodegradable elastomers (CABEs) with greatly improved mechanical strength and easily clickable surfaces for biofunctionalization. This novel chemistry modification strategy is applicable to a number of different types of polymers for improved mechanical properties and biofunctionality.

Fluorescence imaging enabled biodegradable photostable polymeric micelles.

Amphiphilic biodegradable photoluminescent polymers (ABPLPs) composed of a biodegradable fluorescent polymer and methoxy poly (ethyleneglycol) demonstrate intrinsic bright, tunable, and stable fluorescence emission. ABPLP micelles elicit minor cellular toxicity and can be used for cell and tissue imaging both in vitro and in vivo.

In situ re-endothelialization via multifunctional nanoscaffolds.

The endothelium monolayer lining in the luminal side of blood vessels provides critical antithrombotic functions. Damage to these cells will expose a highly thrombogenic subendothelium, which leads to pathological vascular changes. Using combined tissue engineering and ligand-receptor targeting strategy, we developed a biodegradable urethane-doped polyester (UPE) multifunctional targeting nanoparticle (MTN) scaffold system with dual ligands: (1) glycoprotein 1b (GP1b) to target the injured arterial endothelium and subendothelium and (2) anti-CD34 antibodies to capture endothelial progenitor cells for endothelium regeneration. The fabricated spherical MTNs of 400 nm were found to be cytocompatible and hemocompatible. Both the in vitro and ex vivo targeting of these nanoscaffolds not only showed binding specificity of MTNs onto the von Willebrand factor -coated surfaces that simulate the injured arterial walls but also competed with platelets for binding onto these injured sites. Further in vivo study has revealed that a single delivery of MTNs upon vascular injury reduced neointimal hyperplasia by 57% while increased endothelium regeneration by ∼ 60% in 21 days. These results support the promise of using MTN nanoscaffolds for treating vascular injury in situ.

Fabrication and characterization of biomimetic multichanneled crosslinked-urethane-doped polyester tissue engineered nerve guides.

Biomimetic scaffolds that replicate the native architecture and mechanical properties of target tissues have been recently shown to be a very promising strategy to guide cellular growth and facilitate tissue regeneration. In this study, porous, soft, and elastic crosslinked urethane-doped polyester (CUPE) tissue engineered nerve guides were fabricated with multiple longitudinally oriented channels and an external non-porous sheath to mimic the native endoneurial microtubular and epineurium structure, respectively. The fabrication technique described herein is highly adaptable and allows for fine control over the resulting nerve guide architecture in terms of channel number, channel diameter, porosity, and mechanical properties. Biomimetic multichanneled CUPE guides were fabricated with various channel numbers and displayed an ultimate peak stress of 1.38 ± 0.22 MPa with a corresponding elongation at break of 122.76 ± 42.17%, which were comparable to that of native nerve tissue. The CUPE nerve guides were also evaluated in vivo for the repair of a 1 cm rat sciatic nerve defect. Although histological evaluations revealed collapse of the inner structure from CUPE TENGs, the CUPE nerve guides displayed fiber populations and densities comparable with nerve autograft controls after 8 weeks of implantation. These studies are the first report of a CUPE-based biomimetic multichanneled nerve guide and warrant future studies towards optimization of the channel geometry for use in neural tissue engineering.

Citric acid-based hydroxyapatite composite scaffolds enhance calvarial regeneration.

Citric acid-based polymer/hydroxyapatite composites (CABP-HAs) are a novel class of biomimetic composites that have recently attracted significant attention in tissue engineering. The objective of this study was to compare the efficacy of using two different CABP-HAs, poly (1,8-octanediol citrate)-click-HA (POC-Click-HA) and crosslinked urethane-doped polyester-HA (CUPE-HA) as an alternative to autologous tissue grafts in the repair of skeletal defects. CABP-HA disc-shaped scaffolds (65 wt.-% HA with 70% porosity) were used as bare implants without the addition of growth factors or cells to renovate 4 mm diameter rat calvarial defects (n = 72, n = 18 per group). Defects were either left empty (negative control group), or treated with CUPE-HA scaffolds, POC-Click-HA scaffolds, or autologous bone grafts (AB group). Radiological and histological data showed a significant enhancement of osteogenesis in defects treated with CUPE-HA scaffolds when compared to POC-Click-HA scaffolds. Both, POC-Click-HA and CUPE-HA scaffolds, resulted in enhanced bone mineral density, trabecular thickness, and angiogenesis when compared to the control groups at 1, 3, and 6 months post-trauma. These results show the potential of CABP-HA bare implants as biocompatible, osteogenic, and off-shelf-available options in the repair of orthopedic defects.