RESUMO
The inclusion of glycerol in formulations for pulmonary drug delivery may affect the bioavailability of inhaled steroids by retarding their transport across the lung epithelium. The aim of this study was to evaluate whether the molecular interactions of glycerol with model pulmonary interfaces provide a biophysical basis for glycerol modifying inhaled drug transport. Dipalmitoylphosphatidylcholine (DPPC) monolayers and liposomes were used as model pulmonary interfaces, in order to examine the effects of bulk glycerol (0-30% w/w) on their structures and dynamics using complementary biophysical measurements and molecular dynamics (MD) simulations. Glycerol was found to preferentially interact with the carbonyl groups in the interfacial region of DPPC and with phosphate and choline in the headgroup, thus causing an increase in the size of the headgroup solvation shell, as evidenced by an expansion of DPPC monolayers (molecular area increased from 52 to 68 Å2) and bilayers seen in both Langmuir isotherms and MD simulations. Both small angle neutron scattering and MD simulations indicated a reduction in gel phase DPPC bilayer thickness by â¼3 Å in 30% w/w glycerol, a phenomenon consistent with the observation from FTIR data, that glycerol caused the lipid headgroup to remain oriented parallel to the membrane plane in contrast to its more perpendicular conformation adopted in pure water. Furthermore, FTIR measurements suggested that the terminal methyl groups of the DPPC acyl chains were constrained in the presence of glycerol. This observation is supported by MD simulations, which predict bridging between adjacent DPPC headgroups by glycerol as a possible source of its putative membrane stiffening effect. Collectively, these data indicate that glycerol preferentially solvates DPPC headgroups and localizes in specific areas of the interfacial region, resulting in structural changes to DPPC bilayers which may influence cell permeability to drugs.
Assuntos
1,2-Dipalmitoilfosfatidilcolina/química , Glicerol/química , Bicamadas Lipídicas/química , Administração por Inalação , Glicerol/farmacologia , Pulmão/química , Pulmão/efeitos dos fármacos , Pulmão/metabolismo , Conformação Molecular , Simulação de Dinâmica Molecular , Espalhamento a Baixo ÂnguloRESUMO
Gating in channels and nanopores plays a key role in regulating flow of ions across membranes. Molecular simulations provide a 'computational microscope' which enables us to examine the physical nature of gating mechanisms at the level of the single channel molecule. Water enclosed within the confines of a nanoscale pore may exhibit unexpected behaviour. In particular, if the molecular surfaces lining the pore are hydrophobic this promotes de-wetting of the pore. De-wetting is observed as stochastic liquid-vapour transitions within a pore, and may lead to functional closure of a pore to the flow of ions and/or water. Such behaviour was first observed in simulations of simple model nanopores and referred to as 'hydrophobic gating'. Simulations of both the nicotinic acetylcholine receptor and of TWIK-1 potassium channels (the latter alongside experimental studies) suggest hydrophobic gating may occur in some biological ion channels. Current studies are focused on designing hydrophobic gates into biomimetic nanopores.
Assuntos
Biomimética , Ativação do Canal Iônico , Canais Iônicos/química , Nanoporos , Membrana Celular/química , Membrana Celular/metabolismo , Simulação por Computador , Interações Hidrofóbicas e Hidrofílicas , Canais Iônicos/metabolismo , Proteínas de Membrana Transportadoras/química , Modelos Moleculares , Nanotecnologia , Canais de Potássio de Domínios Poros em Tandem/química , Canais de Potássio de Domínios Poros em Tandem/metabolismo , Receptores Nicotínicos/química , Receptores Nicotínicos/metabolismo , Água/químicaRESUMO
Cholesterol plays a key role in the molecular and mesoscopic organisation of lipid membranes and it is expected that changes in its molecular structure (e.g., through environmental factors such as oxidative stress) may affect adversely membrane properties and function. In this study, we present evidence that oxidation of cholesterol has significant effects on the mechanical properties, molecular and mesoscopic organisation and lipid-sterol interactions in condensed monolayers composed of the main species found in the inner leaflet of the erythrocyte membrane. Using a combination of experimental methods (static area compressibility, surface dilatational rheology, fluorescence microscopy, and surface sensitive X-ray techniques) and atomistic molecular dynamics simulations, we show that oxidation of cholesterol to 7-ketocholesterol leads to stiffening of the monolayer (under both static and dynamic conditions), significant changes in the monolayer microdomain organisation, disruption in the van der Waals, electrostatic and hydrophobic interactions between the sterol and the other lipid species, and the lipid membrane hydration. Surface sensitive X-ray techniques reveal that, whilst the molecular packing mode is not significantly affected by cholesterol oxidation in these condensed phases, there are subtle changes in membrane thickness and a significant decrease in the coherence length in monolayers containing 7-ketocholesterol.
RESUMO
The accurate sequencing of DNA using nanopores requires control over the speed of DNA translocation through the pores and also of the DNA conformation. Our studies show that ssDNA translocates through hourglass-shaped pores with hydrophobic constriction regions when an electric field is applied. The constriction provides a barrier to translocation and thereby slows down DNA movement through the pore compared with pores without the constriction. We show that ssDNA moves through these hydrophobic pores in an extended conformation and therefore does not form undesirable secondary structures that may affect the accuracy of partial current blockages for DNA sequencing.
Assuntos
DNA de Cadeia Simples/química , Nanoporos , Sequência de Bases , Eletricidade , Interações Hidrofóbicas e Hidrofílicas , Simulação de Dinâmica Molecular , Conformação de Ácido NucleicoRESUMO
It is desirable that nanopores that are components of biosensors are gated, i.e., capable of controllable switching between closed (impermeable) and open (permeable) states. A central hydrophobic barrier within a nanopore may act as a voltage-dependent gate via electrowetting, i.e., changes in nanopore surface wettability by application of an electric field. We use "computational electrophysiology" simulations to demonstrate and characterize electrowetting of a biomimetic nanopore containing a hydrophobic gate. We show that a hydrophobic gate in a model ß-barrel nanopore can be functionally opened by electrowetting at voltages that do not electroporate lipid bilayers. During the process of electrowetting, voltage-induced alignment of water dipoles occurs within the hydrophobic gate region of the nanopore, with water entry preceding permeation of ions through the opened nanopore. When the ionic imbalance that generates a transbilayer potential is dissipated, water is expelled from the hydrophobic gate and the nanopore recloses. The open nanopore formed by electrowetting of a "featureless" ß-barrel is anionic selective due to the transmembrane dipole potential resulting from binding of Na+ ions to the headgroup regions of the surrounding lipid bilayer. Thus, hydrophobic barriers can provide voltage-dependent gates in designed biomimetic nanopores. This extends our understanding of hydrophobic gating in synthetic and biological nanopores, providing a framework for the design of functional nanopores with tailored gating functionality.
Assuntos
Materiais Biomiméticos/química , Eletroumectação , Interações Hidrofóbicas e Hidrofílicas , Nanoporos , Ativação do Canal Iônico , Bicamadas Lipídicas/química , Modelos MolecularesRESUMO
A macromolecular nanopore inserted into a membrane may perturb the dynamic organization of the surrounding lipid bilayer. To better understand the nature of such perturbations, we have undertaken a systematic molecular dynamics simulation study of lipid bilayer structure and dynamics around three different classes of nanopore: a carbon nanotube, three related cyclic peptide nanotubes differing in the nature of their external surfaces, and a model of a ß-barrel nanopore protein. Periodic spatial distributions of several lipid properties as a function of distance from the nanopore were observed. This was especially clear for the carbon nanotube system, for which the density of lipids, the bilayer thickness, the projection of lipid head-to-tail vectors onto the membrane plane, and lipid lateral diffusion coefficients exhibited undulatory behavior as a function of the distance from the surface of the channel. Overall, the differences in lipid behavior as a function of the nanopore structure reveal local adaptation of the bilayer structure and dynamics to different embedded nanopore structures. Both the local structure and dynamic behavior of lipids around membrane-embedded nanopores are sensitive to the geometry and nature of the outer surface of the macromolecule/molecular assembly forming the pore.
Assuntos
Bicamadas Lipídicas/química , Nanoporos/ultraestrutura , Nanotubos de Carbono/química , Peptídeos Cíclicos/química , Fosfatidilcolinas/química , Ligação de Hidrogênio , Simulação de Dinâmica Molecular , Nanotubos de Carbono/ultraestrutura , Conformação Proteica em Folha betaRESUMO
Ion channels play key roles in cell membranes, and recent advances are yielding an increasing number of structures. However, their functional relevance is often unclear and better tools are required for their functional annotation. In sub-nanometer pores such as ion channels, hydrophobic gating has been shown to promote dewetting to produce a functionally closed (i.e., non-conductive) state. Using the serotonin receptor (5-HT3R) structure as an example, we demonstrate the use of molecular dynamics to aid the functional annotation of channel structures via simulation of the behavior of water within the pore. Three increasingly complex simulation analyses are described: water equilibrium densities; single-ion free-energy profiles; and computational electrophysiology. All three approaches correctly predict the 5-HT3R crystal structure to represent a functionally closed (i.e., non-conductive) state. We also illustrate the application of water equilibrium density simulations to annotate different conformational states of a glycine receptor.
Assuntos
Canais Iônicos/química , Receptores 5-HT3 de Serotonina/química , Água/química , Membrana Celular/metabolismo , Interações Hidrofóbicas e Hidrofílicas , Modelos Moleculares , Simulação de Dinâmica Molecular , Conformação ProteicaRESUMO
Nanopores in membranes have a range of potential applications. Biomimetic design of nanopores aims to mimic key functions of biological pores within a stable template structure. Molecular dynamics simulations have been used to test whether a simple ß-barrel protein nanopore can be modified to incorporate a hydrophobic barrier to permeation. Simulations have been used to evaluate functional properties of such nanopores, using water flux as a proxy for ionic conductance. The behavior of these model pores has been characterized as a function of pore size and of the hydrophobicity of the amino acid side chains lining the narrow central constriction of the pore. Potential of mean force calculations have been used to calculate free energy landscapes for water and for ion permeation in selected models. These studies demonstrate that a hydrophobic barrier can indeed be designed into a ß-barrel protein nanopore, and that the height of the barrier can be adjusted by modifying the number of consecutive rings of hydrophobic side chains. A hydrophobic barrier prevents both water and ion permeation even though the pore is sterically unoccluded. These results both provide insights into the nature of hydrophobic gating in biological pores and channels, and furthermore demonstrate that simple design features may be computationally transplanted into ß-barrel membrane proteins to generate functionally complex nanopores.