Measurements of Spontaneous and External Stimuli Molecular Release Processes from a Single Optically Trapped Poly(lactic-co-glycolic) Acid Microparticle and a Liposome Containing Gold Nanospheres.

We investigated the single particle kinetics of the molecular release processes from two types of microcapsules used as drug delivery systems (DDS): biodegradable poly(lactic-co-glycolic) acid (PLGA) and a light-triggered-degradable liposome encapsulating gold nanospheres (liposome-GNP). To optimize the design of DDS capsules, it is highly desirable to develop a method for real-time monitoring of the release process. Using a combination of optical tweezers and confocal fluorescence microspectroscopy we successfully analyzed a single optically trapped PLGA particle and liposome-GNPs in solution. From temporal decay profiles of the fluorescence intensity, we determined the time constant τ of the release processes. We demonstrated that the release rate of spontaneously degradable microcapsules (PLGA) decreased with increasing size, while conversely, the release rate of external stimuli-degradable microcapsules (liposome-GNPs) increased in proportion to their size. This result is explained by the differences in the disruption mechanisms of the capsules, with PLGA undergoing hydrolysis and the GNPs in the liposome-GNP undergoing a photoacoustic effect under nanosecond pulsed laser irradiation. The present approach offers a way forward to an alternative microanalysis system for single drug delivery nanocarriers.

Optical trapping of nanoclusters formed in a temperature-responsive ionic liquid aqueous solution under focused near-infrared laser irradiation.

Confining molecules and ions at a specific position in a solution enables the control of chemical reactions and analysis of tiny amounts of substances. Here, we demonstrate local condensation of a temperature responsive ionic liquid using optical tweezers. Two kinds of microdroplets are prepared through phase separation or nanocluster formation under irradiation of a near-infrared laser beam. The droplet formation mechanism is discussed in view of the evolution of an optical potential well and the local temperature distribution.

Fluorescence Colour Control in Perylene-Labeled Polymer Chains Trapped by Nanotextured Silicon.

The ability to modulate, tune, and control fluorescence colour has attracted much attention in photonics-related research fields. Thus far, it has been impossible to achieve fluorescence colour control (FCC) for material with a fixed structure, size, surrounding medium, and concentration. Here, we propose a novel approach to FCC using optical tweezers. We demonstrate an optical trapping technique using nanotextured Si (black-Si) that can efficiently trap polymer chains. By increasing the laser intensity, the local concentration of perylene-labelled water-soluble polymer chains increased inside the trapping potential. Accordingly, the excimer fluorescence of perylene increased while the monomer fluorescence decreased, evidenced by a fluorescence colour change from blue to orange. Using nanostructure-assisted optical tweezing, we demonstrate control of the relative intensity ratio of fluorescence of the two fluorophores, thus showing remote and reversible FCC of the polymer assembly.

Formation of Single Double-Layered Coacervate of Poly(N,N-diethylacrylamide) in Water by a Laser Tweezer.

We demonstrate liquid-liquid phase separation involving both coacervation and coil-to-globule phase transition of a thermoresponsive polymer. By focusing a near-infrared laser beam into an aqueous solution of poly(N-isopropylacrylamide) (PNIPAM), a single phase-separated polymer microdroplet can be formed and stably trapped at the focal point. Such droplet formation is induced by a local elevation in temperature (induced by a photothermal effect) and an optical force. The technique allows us to selectively analyze a single polymer droplet trapped at the focal point. In this study, we applied this technique to poly(N,N-diethylacrylamide) (PDEA) in water and generated a double-layered PDEA droplet. Such an inhomogeneous and complex microstructure has not been previously observed both in steady-state heating of a PDEA solution and in the PNIPAM system. Moreover, we used micro-Raman spectroscopy to clarify that PDEA underwent dehydration due to a coil-to-globule phase transition. Despite this, the polymer concentration (Cpoly) of the trapped PDEA droplet was very low and was around 30 wt %. Cpoly depended on the molecular weight of PDEA and the laser power that regulates the temperature elevation. These results strongly indicate that PDEA undergoes coacervation in addition to a coil-to-globule phase transition. This study will help provide us with a fundamental understanding of the phase separation mechanisms of thermoresponsive polymers.

Electrophoretic Adhesion of Conductive Hydrogels.

For the development of next-generation wearable and implantable devices that connect the human body and machines, the adhesion of a conductive hydrogel is required. In this study, a conductive hydrogel is adhered using an electrophoretic approach through polyion complex formation at the interface of the hydrogels. Cationic and anionic conductive hydrogels adhere to anionic and cationic hydrogels, respectively. Moreover, the cationic and anionic conductive hydrogels adhere strongly to each other and the adhered conductive hydrogels exhibit conductivity. De-adhesion is possible by adding a salt and re-adhesion is demonstrated under aqueous conditions. It is believed that this innovative adhesion strategy for conductive hydrogels will be a fundamental technology for the connecting "soft" people and "hard" machines.

Dynamics of the Phase Separation in a Thermoresponsive Polymer: Accelerated Phase Separation of Stereocontrolled Poly( N, N-diethylacrylamide) in Water.

We studied the dependence on tacticity of the dynamic phase separation behavior of thermoresponsive poly( N, N-diethylacrylamide) (PDEA) in an aqueous solution. Using a laser temperature-jump technique combined with transient photometry, we determined the time constants of the phase separation and found that both atactic and isotactic-rich PDEAs had fast and slow phase separation processes (τfast and τslow). The fast process (τfast) was independent of the tacticity, irrespective of the concentration. On the other hand, the slow process had a strong dependence on the tacticity. We found the slow phase separation process got considerably faster with increasing isotacticity in dilute solutions. This effect due to the tacticity of the PDEA is totally different from that of poly( N-isopropylacrylamide) and can be explained on the basis of the difference between the hydrophobicity of atactic PDEA and that of isotactic-rich PDEA.

Laser trapping/confocal Raman spectroscopic characterization of PLGA-PEG nanoparticles.

We have immobilized poly(ethylene glycol) (PEG) on the surfaces of poly(lactic-co-glycolic acid) (PLGA) nanoparticles by two different chemical methods, i.e., SOCl2 halogenate-alcoholysis and DCC dehydration. The immobilized PLGA nanoparticles were characterized by DLS, 1H NMR, FT-IR and laser trapping/confocal Raman spectroscopic techniques. As a result, especially the Raman spectra which were measured after optically trapping ca. 10 individual nanoparticles in solution indicated that the PLGA nanoparticles were successfully immobilized with the PEG by the chemical methods.

Highly Sensitive Detection of Organic Molecules on the Basis of a Poly(N-isopropylacrylamide) Microassembly Formed by Plasmonic Optical Trapping.

We demonstrate that a poly(N-isopropylacrylamide) (PNIPAM) microassembly, formed by plasmonic optical trapping, can provide the platform for a highly sensitive detection technique for fluorescent and nonfluorescent organic molecules dissolved in aqueous solution. PNIPAM microassemblies can be easily formed by a combination with a photothermal effect and an enhanced optical force. These physical phenomena were obtained through resonant excitation of localized surface plasmon (LSP). Sparsely distributed fluorescent or nonfluorescent molecules dissolved in solution can be extracted into the PNIPAM assembly, resulting in an increase in fluorescence or Raman signals. In particular, we successfully detected quite small amounts of analytes (rhodamine B) at the 10-9 mol/L level. Using LSP is an alternative approach in analytical chemistry and can be used in addition to surface enhanced Raman scattering and surface enhanced fluorescence.

Plasmonic optical trapping of nanometer-sized J- /H- dye aggregates as explored by fluorescence microspectroscopy.

In the present study, we explored plasmonic optical trapping (POT) of nanometer-sized organic crystals, carbocyanine dye aggregates (JC-1). JC-1 dye forms both J- and H- aggregates in aqueous solution. POT behavior was analyzed using fluorescence microspectroscopy. POT of JC-1 aggregates was realized in an increase in their fluorescence intensity from the focus area upon plasmon excitation. Repeating on-and-off plasmonic excitation resulted in POT of JC-1 aggregates in a trap-and-release mode. Such POT of nanometer-sized dye aggregates lying in a Rayleigh scattering regime (< 100 nm) is important toward molecular manipulation. Furthermore, interestingly, we found that the J-aggregates were preferentially trapped than H-aggregates. It possibly indicates semi-selective optical trapping of nanoparticles on the basis of molecular alignments.

Permanent fixing or reversible trapping and release of DNA micropatterns on a gold nanostructure using continuous-wave or femtosecond-pulsed near-infrared laser light.

The use of localized surface plasmons (LSPs) for highly sensitive biosensors has already been investigated, and they are currently being applied for the optical manipulation of small nanoparticles. The objective of this work was the optical trapping of λ-DNA on a metallic nanostructure with femtosecond-pulsed (fs) laser irradiation. Continuous-wave laser irradiation, which is generally used for plasmon excitation, not only increased the electromagnetic field intensity but also generated heat around the nanostructure, causing the DNA to become permanently fixed on the plasmonic substrate. Using fs laser irradiation, on the other hand, the reversible trapping and release of the DNA was achieved by switching the fs laser irradiation on and off. This trap-and-release behavior was clearly observed using a fluorescence microscope. This technique can also be used to manipulate other biomolecules such as nucleic acids, proteins, and polysaccharides and will prove to be a useful tool in the fabrication of biosensors.

Rapid synthesis of an aluminum-rich MSE-type zeolite by the hydrothermal conversion of an FAU-type zeolite.

An aluminum-rich MSE-type zeolite (Si/Al is as small as 7) has been successfully synthesized in a remarkably short crystallization period of only 3 days by the hydrothermal conversion of an FAU-type zeolite, presumably by the assembly of four-membered-ring (4-R) aluminosilicate oligomers supplied by the double 6-R (D6R) components of the FAU framework with the aid of the structure-directing agents and seed crystals. The dealuminated version of the aluminum-rich MSE-type zeolite showed a high level of coke durability in addition to a significant yield of propylene, which indicates that this novel zeolitic material is suitable for industrial applications as a highly selective and long-lived catalyst.

Formation of a core-shell droplet in a thermo-responsive ionic liquid/water mixture by using optical tweezers.

Many chemical and biological processes involve phase separation; however, controlling this is challenging. Here, we demonstrate local phase separation using optical tweezers in a thermo-responsive ionic liquid/water solution. Upon near-infrared laser irradiation, a single droplet is formed at the focal spot. The droplet has a core consisting of highly concentrated ionic liquid. The mechanism of the core-shell droplet formation is discussed in view of the spatial distribution of optical and thermal potentials.

Generation of Ultralong Liposome Tubes by Membrane Fusion beneath a Laser-Induced Microbubble on Gold Surfaces.

Membrane fusion (MF) is one of the most important and ubiquitous processes in living organisms. In this study, we developed a novel method for MF of liposomes. Our method is based on laser-induced bubble generation on gold surfaces (a plasmonic nanostructure or a flat film). It is a simple and quick process that takes about 1 min. Upon bubble generation, liposomes not only collect and become trapped but also fuse to form long tubes beneath the bubble. Moreover, during laser irradiation, these long tubes remain stable and move with a waving motion while continuing to grow, resulting in the creation of ultralong tubes with lengths of about 50 µm. It should be noted that the morphology of these ultralong tubes is analogous to that of a sea anemone. The behavior of the tubes was also monitored by fluorescence microscopy. The generation of these ultralong tubes is discussed on the basis of Marangoni convection and thermophoresis.

Laser-Induced Transfer of Noble Metal Nanodots with Femtosecond Laser-Interference Processing.

Noble metal nanodots have been applied to plasmonic devices, catalysts, and highly sensitive detection in bioinstruments. We have been studying the fabrications of them through a laser-induced dot transfer (LIDT) technique, a type of laser-induced forward transfer (LIFT), in which nanodots several hundred nm in diameter are produced via a solid-liquid-solid (SLS) mechanism. In the previous study, an interference laser processing technique was applied to LIDT, and aligned Au nanodots were successfully deposited onto an acceptor substrate in a single shot of femtosecond laser irradiation. In the present experiment, Pt thin film was applied to this technique, and the deposited nanodots were measured by scanning electron microscopy (SEM) and compared with the Au nanodots. A typical nanodot had a roundness fr=0.98 and circularity fcirc=0.90. Compared to the previous experiment using Au thin film, the size distribution was more diffuse, and it was difficult to see the periodic alignment of the nanodots in the parameter range of this experiment. This method is promising as a method for producing large quantities of Pt particles with diameters of several hundred nm.

Incoherent Optical Tweezers on Black Titanium.

Optical tweezers enable the manipulation of micro- and nanodielectric particles through entrapment using a tightly focused laser. Generally, optical trapping of submicron size particles requires high-intensity light in the order of MW/cm2. Here, we demonstrate a technique of stable optical trapping of submicron polymeric beads on nanostructured titanium surfaces (black-Ti) without the use of lasers. Fluorescent polystyrene beads with a diameter d = 20-500 nm were successfully trapped on black-Ti by low-intensity focused illumination of incoherent light at λ = 370 m from a Hg lamp. Light intensity was 5.5 W/cm2, corresponding to a reduced light intensity of 6 orders of magnitude. Upon switching off illumination, trapped particles were released from the illuminated area, indicating that trapping was optically driven and reversible. Such trapping behavior was not observed on nonstructured Ti surfaces or on nanostructured silicon surfaces. Thus, the Ti nanostructures were demonstrated to play a key role.

Plasmonic Manipulation of DNA using a Combination of Optical and Thermophoretic Forces: Separation of Different-Sized DNA from Mixture Solution.

We demonstrate the size-dependent separation and permanent immobilization of DNA on plasmonic substrates by means of plasmonic optical tweezers. We found that a gold nanopyramidal dimer array enhanced the optical force exerted on the DNA, leading to permanent immobilization of the DNA on the plasmonic substrate. The immobilization was realized by a combination of the plasmon-enhanced optical force and the thermophoretic force induced by a photothermal effect of the plasmons. In this study, we applied this phenomenon to the separation and fixation of size-different DNA. During plasmon excitation, DNA strands of different sizes became permanently immobilized on the plasmonic substrate forming micro-rings of DNA. The diameter of the ring was larger for longer DNA (in base pairs). When we used plasmonic optical tweezers to trap DNA of two different lengths dissolved in solution (φx DNA (5.4 kbp) and λ-DNA (48.5 kbp), or φx DNA and T4 DNA (166 kbp)), the DNA were immobilized, creating a double micro-ring pattern. The DNA were optically separated and immobilized in the double ring, with the shorter sized DNA and the larger one forming the smaller and larger rings, respectively. This phenomenon can be quantitatively explained as being due to a combination of the plasmon-enhanced optical force and the thermophoretic force. Our plasmonic optical tweezers open up a new avenue for the separation and immobilization of DNA, foreshadowing the emergence of optical separation and fixation of biomolecules such as proteins and other ncuelic acids.

Microanalysis of Single Poly(N-isopropylacrylamide) Droplet Produced by an Optical Tweezer in Water: Isotacticity Dependence of Growth and Chemical Structure of the Droplet.

Thermoresponsive phase separation mechanisms of aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions were investigated using an optical tweezer combined with a Raman microspectroscope. A near-infrared laser beam (λ = 1064 nm) was focused into the solution to produce and trap a single polymer microdroplet under an optical microscope. The laser beam played two important roles: The first role is to locally heat the solution to induce phase separation in which numerous polymer microdroplets are generated around the focus, while the second one is to collect these microdroplets. Eventually, a single polymer droplet was stably produced and trapped at the focus. Our method enabled us to perform two types of microanalysis for the droplet. Analysis I is real-time monitoring the growth of the polymer droplets by which we can determine the growth rate of droplets. Analysis II is Raman microspectroscopy to reveal chemical components of the droplets. By means of these two analyses, we revealed important phase separation mechanisms in terms of stereoregularity (isotacticity) dependence. From analysis I, we show that droplet growth is governed by the Ostwald ripening mechanism and the growth is accelerated by increasing the isotacticity. From analysis II, we show that the gelation is promoted in the droplet (physical gel formation) with increasing isotacticity. Our technique should be a versatile tool to explore liquid-liquid phase separation mechanisms for various binary solution systems.

Near-infrared continuous-wave light driving a two-photon photochromic reaction with the assistance of localized surface plasmon.

We demonstrate that a photochromic reaction can be driven by irradiation from a weak, near-infrared continuous-wave (NIR-CW) laser light. A two-photon ring-opening photochromic reaction of a diarylethene (DE) derivative can be induced by irradiation with a NIR-CW laser light (lambda = 808 nm). An ultrathin polymer film doped with DE in its closed form was coated onto a gold-nanoparticle-integrated glass substrate. Upon irradiation of the sample with a CW laser at low fluence (0.1-4.0 W/cm(2)), we could clearly observe bleaching of the DE (ring-opening reaction). Following the IR irradiation, the bleached absorption could be reversibly recovered by applying UV irradiation (ring-closing reaction). We verified that the yield of the photochromic ring-opening reaction of the DE was proportional to the square of the irradiation fluence. The origin of this NIR-CW-induced two-photon photochromic reaction is an "enhancing effect" that acts on the electromagnetic field (localized surface plasmon) of the gold nanoparticles. The DE interacts with the surface plasmon and receives energy from two photons, which excites it to a state from which the ring-opening reaction can be initiated.

Phase separation dynamics of aqueous solutions of thermoresponsive polymers studied by a laser T-jump technique.

Poly(N-isopropylacrylamide) and poly(vinyl methyl ether) are well-known thermoresponsive polymers. The aqueous solutions of these polymers exhibit a phase transition followed by phase separation with LCST approximately 305-310 K. In the present study, the dynamic behavior of the phase separation was analyzed by a laser T-jump method. Two different T-jump methodologies were employed: the first was a dye-photosensitized T-jump technique (indirect heating) using 532 nm laser pulses, while the other was a direct heating T-jump technique using 1.2 mum laser pulses. Both methods gave similar results. The time constants (tau) of the phase separation were systematically determined for 1-10 wt % aqueous solutions of the polymers, and a hydrodynamic radius (R) dependence for tau was clearly observed. The values of tau increased linearly with increasing square of R. The present behavior is interpretable in the framework of Tanaka's model for the volume phase transition of a gel, since each of the polymer chains are entangled in the present sample solutions, which can be regarded as approximating to a gel in solution.

Laser-induced shock wave can spark triboluminescence of amorphous sugars.

We investigated the triboluminescence (TL) of sugars using an innovative experimental approach: the laser-induced shock wave (LISW) technique. We found that the LISW could induce very bright TL in crystalline sugars, the intensity of which was shown to be 10(5) times higher than that obtained by conventional manual hand rubbing. We also applied the LISW technique to amorphous sugar samples. Although it was supposed that TL could not be excited in amorphous solids of sugars having isotropic structures, we revealed that LISW could induce bright TL in amorphous sugars similar to that induced in crystalline sugars. On the basis of the experimental results showing the dynamic behavior of the sample fracture combined with those of the TL, we discuss these novel TL mechanisms in sugars. We believe that the shock wave technique opens a new channel for investigating the nature of TL.