A Simple High-Throughput Field Sample Preparation Method Based on Matrix-Induced Sugaring-Out for the Simultaneous Determination of 5-Hydroxymethylfurfural and Phenolic Compounds in Honey.

In the present work, a high-throughput field sample preparation method was reported for the simultaneous determination of 5-hydroxymethylfurfural and phenolic compounds in honey. Combining a simple and green homogenous liquid−liquid extraction, matrix-induced sugaring-out, with the use of a 96-deepwell plate and multichannel pipette, the proposed method showed its merits in instrument-free and high-throughput preparation. Due to the high-throughput property, the parameters of the method were rapidly and systematically studied using a constructed 4 × 2 × 4 × 3 array (sample amount × ratio of ACN:H2O × standing time × replicates) in a 96-deepwell plate. Analytical performance was fully validated, and the limits of detection and limits of quantification were in the range of 0.17−1.35 µg/g and 0.51−4.14 µg/g, respectively. Recoveries were between 83.98 and 117.11%, and all the precisions were <5%. Furthermore, the developed method was successfully applied in the outdoor preparation of commercial honey samples and the in-field preparation of raw honey samples in apiary. The current work presented a simple, rapid, and high-throughput method for the field sample preparation of honey and provides a valuable strategy for the design of field and on-site sample preparation.

Micro Salting-Out Assisted Matrix Solid-Phase Dispersion: A Simple and Fast Sample Preparation Method for the Analysis of Bisphenol Contaminants in Bee Pollen.

In the present work, a novel sample preparation method, micro salting-out assisted matrix solid-phase dispersion (µ-SOA-MSPD), was developed for the determination of bisphenol A (BPA) and bisphenol B (BPB) contaminants in bee pollen. The proposed method was designed to combine two classical sample preparation methodologies, matrix solid-phase dispersion (MSPD) and homogenous liquid-liquid extraction (HLLE), to simplify and speed-up the preparation process. Parameters of µ-SOA-MSPD were systematically investigated, and results indicated the significant effect of salt and ACN-H2O extractant on the signal response of analytes. In addition, excellent clean-up ability in removing matrix components was observed when primary secondary amine (PSA) sorbent was introduced into the blending operation. The developed method was fully validated, and the limits of detection for BPA and BPB were 20 µg/kg and 30 µg/kg, respectively. Average recoveries and precisions were ranged from 83.03% to 94.64% and 1.76% to 5.45%, respectively. This is the first report on the analysis of bisphenol contaminants in bee pollen sample, and also on the combination of MSPD and HLLE. The present method might provide a new strategy for simple and fast sample preparation of solid and semi-solid samples.

Miniaturized Salting-Out Assisted Liquid-Liquid Extraction Combined with Disposable Pipette Extraction for Fast Sample Preparation of Neonicotinoid Pesticides in Bee Pollen.

As the main source of nutrients for the important pollinator honeybee, bee pollen is crucial for the health of the honeybee and the agro-ecosystem. In the present study, a new sample preparation procedure has been developed for the determination of neonicotinoid pesticides in bee pollen. The neonicotinoid pesticides were extracted using miniaturized salting-out assisted liquid-liquid extraction (mini-SALLE), followed by disposable pipette extraction (DPX) for the clean-up of analytes. Effects of DPX parameters on the clean-up performance were systematically investigated, including sorbent types (PSA, C18, and silica gel), mass of sorbent, loading modes, and elution conditions. In addition, the clean-up effect of classical dispersive solid-phase extraction (d-SPE) was compared with that of the DPX method. Results indicated that PSA-based DPX showed excellent clean-up ability for the high performance liquid chromatography (HPLC) analysis of neonicotinoid pesticides in bee pollen. The proposed DPX method was fully validated and demonstrated to provide the advantage of simple and rapid clean-up with low consumption of solvent. This is the first report of DPX method applied in bee pollen matrix, and would be valuable for the development of a fast sample preparation method for this challenging and important matrix.

Determination of Ascorbic Acid, Total Ascorbic Acid, and Dehydroascorbic Acid in Bee Pollen Using Hydrophilic Interaction Liquid Chromatography-Ultraviolet Detection.

Ascorbic acid (AA) is one of the essential nutrients in bee pollen, however, it is unstable and likely to be oxidized. Generally, the oxidation form (dehydroascorbic acid (DHA)) is considered to have equivalent biological activity as the reduction form. Thus, determination of the total content of AA and DHA would be more accurate for the nutritional analysis of bee pollen. Here we present a simple, sensitive, and reliable method for the determination of AA, total ascorbic acids (TAA), and DHA in rape (Brassica campestris), lotus (Nelumbo nucifera), and camellia (Camellia japonica) bee pollen, which is based on ultrasonic extraction in metaphosphoric acid solution, and analysis using hydrophilic interaction liquid chromatography (HILIC)-ultraviolet detection. Analytical performance of the method was evaluated and validated, then the proposed method was successfully applied in twenty-one bee pollen samples. Results indicated that contents of AA were in the range of 17.54 to 94.01 µg/g, 66.01 to 111.66 µg/g, and 90.04 to 313.02 µg/g for rape, lotus, and camellia bee pollen, respectively. In addition, percentages of DHA in TAA showed good intra-species consistency, with values of 13.7%, 16.5%, and 7.6% in rape, lotus, and camellia bee pollen, respectively. This is the first report on the discriminative determination between AA and DHA in bee pollen matrices. The proposed method would be valuable for the nutritional analysis of bee pollen.

Matrix-Induced Sugaring-Out: A Simple and Rapid Sample Preparation Method for the Determination of Neonicotinoid Pesticides in Honey.

In the present work, we developed a simple and rapid sample preparation method for the determination of neonicotinoid pesticides in honey based on the matrix-induced sugaring-out. Since there is a high concentration of sugars in the honey matrix, the honey samples were mixed directly with acetonitrile (ACN)-water mixture to trigger the phase separation. Analytes were extracted into the upper ACN phase without additional phase separation agents and injected into the HPLC system for the analysis. Parameters of this matrix-induced sugaring-out method were systematically investigated. The optimal protocol involves 2 g honey mixed with 4 mL ACN-water mixture (v/v, 60:40). In addition, this simple sample preparation method was compared with two other ACN-water-based homogenous liquid-liquid extraction methods, including salting-out assisted liquid-liquid extraction and subzero-temperature assisted liquid-liquid extraction. The present method was fully validated, the obtained limits of detection (LODs) and limits of quantification (LOQs) were from 21 to 27 and 70 to 90 µg/kg, respectively. Average recoveries at three spiked levels were in the range of 91.49% to 97.73%. Precision expressed as relative standard deviations (RSDs) in the inter-day and intra-day analysis were all lower than 5%. Finally, the developed method was applied for the analysis of eight honey samples, results showed that none of the target neonicotinoid residues were detected.

Comparison of the Partition Efficiencies of Multiple Phenolic Compounds Contained in Propolis in Different Modes of Acetonitrile⁻Water-Based Homogenous Liquid⁻Liquid Extraction.

Homogeneous liquid⁻liquid extraction (HLLE) has attracted considerable interest in the sample preparation of multi-analyte analysis. In this study, HLLEs of multiple phenolic compounds in propolis, a polyphenol-enriched resinous substance collected by honeybees, were performed for improving the understanding of the differences in partition efficiencies in four acetonitrile⁻water-based HLLE methods, including salting-out assisted liquid⁻liquid extraction (SALLE), sugaring-out assisted liquid⁻liquid extraction (SULLE), hydrophobic-solvent assisted liquid⁻liquid extraction (HSLLE), and subzero-temperature assisted liquid⁻liquid extraction (STLLE). Phenolic compounds were separated in reversed-phase HPLC, and the partition efficiencies in different experimental conditions were evaluated. Results showed that less-polar phenolic compounds (kaempferol and caffeic acid phenethyl ester) were highly efficiently partitioned into the upper acetonitrile (ACN) phase in all four HLLE methods. For more-polar phenolic compounds (caffeic acid, p-coumaric acid, isoferulic acid, dimethoxycinnamic acid, and cinnamic acid), increasing the concentration of ACN in the ACN⁻H2O mixture could dramatically improve the partition efficiency. Moreover, results indicated that NaCl-based SALLE, HSLLE, and STLLE with ACN concentrations of 50:50 (ACN:H2O, v/v) could be used for the selective extraction of low-polarity phenolic compounds. MgSO4-based SALLE in the 50:50 ACN⁻H2O mixture (ACN:H2O, v/v) and the NaCl-based SALLE, SULLE, and STLLE with ACN concentrations of 70:30 (ACN:H2O, v/v) could be used as general extraction methods for multiple phenolic compounds.

A Review on the Recent Progress in Matrix Solid Phase Dispersion.

Matrix solid phase dispersion (MSPD) has proven to be an efficient sample preparation method for solid, semi-solid, and viscous samples. Applications of MSPD have covered biological, food, and environmental samples, including both organic and inorganic analytes. This review presents an update on the development of MSPD in the period 2015~June 2018. In the first part of this review, we focus on the latest development in MSPD sorbent, including molecularly imprinted polymers, and carbon-based nanomaterials etc. The second part presents the miniaturization of MSPD, discussing the progress in both micro-MSPD and mini-MSPD. The on-line/in-line techniques for improving the automation and sample throughput are also discussed. The final part summarizes the success in the modification of original MSPD procedures.

One-Step Extraction and Hydrolysis of Flavonoid Glycosides in Rape Bee Pollen Based on Soxhlet-Assisted Matrix Solid Phase Dispersion.

INTRODUCTION: Flavonoids are frequently found as glycosylated derivatives in plant materials. To determine contents of flavonoid aglycones in these matrices, procedures for the extraction and hydrolysis of flavonoid glycosides are required. The current sample preparation method is both labour and time consuming. OBJECTIVE: Develop a modified matrix solid phase dispersion (MSPD) procedure as an alternative methodology for the one-step extraction and hydrolysis of flavonoid glycosides. METHOD: HPLC-DAD was applied for demonstrating the one-step extraction and hydrolysis of flavonoids in rape bee pollen. The obtained contents of flavonoid aglycones (quercetin, kaempferol, isorhamnetin) were used for the optimisation and validation of the method. RESULTS: The extraction and hydrolysis were accomplished in one step. The procedure completes in 2 h with silica gel as dispersant, a 1:2 ratio of sample to dispersant, and 60% aqueous ethanol with 0.3 M hydrochloric acid as the extraction solution. The relative standard deviations (RSDs) of repeatability were less than 5%, and the recoveries at two fortified levels were between 88.3 and 104.8%. CONCLUSION: The proposed methodology is simple and highly efficient, with good repeatability and recovery. Compared with currently available methods, the present work has advantages of using less time and labour, higher extraction efficiency, and less consumption of the acid catalyst. This method may have applications for the one-step extraction and hydrolysis of bioactive compounds from plant materials. Copyright © 2017 John Wiley & Sons, Ltd.

Determination of bisphenols in beeswax based on sugaring out-assisted liquid-liquid extraction: Method development and application in survey, recycling and degradation studies.

The methodology of sugaring out-assisted liquid-liquid extraction (SULLE) coupled with high-performance liquid chromatography-fluorescence detection was devised for quantifying bisphenol A (BPA) and bisphenol B (BPB) in beeswax. The effectiveness of SULLE was methodically explored and proved superior to the salting out-assisted liquid-liquid extraction approach for beeswax sample preparation. The analytical performance underwent comprehensive validation, revealing detection limits of 10 µg/kg for BPA and 20 µg/kg for BPB. The method developed was employed to analyse commercial beeswax (n = 15), beeswax foundation (n = 15) and wild-build comb wax (n = 26) samples. The analysis revealed BPA presence in four commercial beeswax samples and three beeswax foundation samples, with the highest detected residue content being 88 ± 7 µg/kg. For BPB, two beeswax foundation samples were positive, with concentrations below the limits of quantification and 85 ± 4 µg/kg, respectively. No bisphenols were detected in wild-build comb wax. Furthermore, the bisphenol removal efficacy of two recycling methods-boiling in water and methanol extraction-was assessed. The findings indicated that after four recycling cycles using water boiling, 9.6% of BPA and 29.2% of BPB remained in the beeswax. Whereas methanol extraction resulted in approximately 7% residual after one recycling process. A long-term study over 210 days revealed the slow degradation of bisphenols in comb beeswax. This degradation fitted well with a first-order model, indicating half-lives (DT50) of 139 days for BPA and 151 days for BPB, respectively. This research provides the first report on bisphenol contamination in beeswax. The low removal rate during the recycling process and the gradual degradation in beeswax underscore the significance of bisphenol contamination and migration in bee hives along with their potential risk to pollinators warranting concern. Furthermore, the developed SULLE method shows promise in preparing beeswax samples to analyse other analytes.

Dipicolinic Acid-Tb3+/Eu3+ Lanthanide Fluorescence Sensor Array for Rapid and Visual Discrimination of Botanical Origin of Honey.

In the present study, a lanthanide fluorescence sensor array was developed for the discrimination of honey's botanical origin. Dipicolinic acid (DPA) was used as the antenna ligand for sensitizing the fluorescence of Tb3+ and Eu3+ to prepare the DPA-Tb3+/Eu3+ complex. This lanthanide fluorescence sensor showed a cross-reactive response to the major constituents of honey, which led to the result that different classes of honey solution exhibited distinct quenching effects on the fluorescence of the DPA-Tb3+/Eu3+ complex. Furthermore, a fluorescence sensor array composed of ten sensors was constructed by adjusting the pH and the component of the DPA-Tb3+/Eu3+ complex to show multivariate responses towards honey. The visual fluorescence image of the sensor array was recorded by using a smartphone under excitation with portable UV lamp. Results indicated that the pattern of the visual image was related with the botanical origin. After extracting the RGB value of each sensor in 96-well plate, the ratio of R/G was used for principal component analysis (PCA). The results showed that three classes of honey (astragalus, logan, and litchi) were well distinguished. Moreover, the value of principal component 1 (PC1) showed good linearity with the composition of mixing honey and could be used for semi-quantitative analysis. The proposed lanthanide fluorescence sensor array presents a visual and portable method for the discrimination of a honey's origin without the use of analytical instruments, and might provide a novel and simple strategy for the measurement of food origin.

Facile one-pot synthesis of near-infrared luminescent gold nanoparticles for sensing copper (II).

Novel near-infrared luminescent gold nanoparticles (NIRL-AuNPs) were synthesized by a simple, rapid and one-pot procedure. The driving force for the formation of these NIRL-AuNPs was attributed to the heat-assisted reduction of a gold(I)-thiol complex. These gold nanoparticles were characterized by TEM, DLS, FT-IR and XPS. Luminescence studies indicated that these NIRL-AuNPs exhibited strong emission with peak maximum at 810 nm, microsecond-range photoluminescence lifetime, large Stokes shifts (>400 nm) and stabilities towards photobleaching and chemical oxidation. The sensing application for Cu(2+) ions of these NIRL-AuNPs was demonstrated. These as-synthesized gold nanoparticles will provide a new NIRL nanomaterial for in vitro and in vivo applications.

Overview of Analytical Methods for the Determination of Neonicotinoid Pesticides in Honeybee Products and Honeybee.

Neonicotinoid pesticides are widely applied for controlling pests in a variety of agriculture crops. Due to the systemic distribution in plants, neonicotinoid pesticides have been found in nectar and pollen, which are the main source of food for the important pollinator honeybee. The risk of neonicotinoid residues in honeybee products and honeybee has caused great attention since their impacts on the environment, ecology, and food safety issues. These concerns require the accurate and sensitive determination of neonicotinoids and their metabolites in the honeybee products and honeybee. Since the trace residue level of neonicotinoid and the complexity of the samples, analysis of neonicotinoid targets in these important matrices is still a great challenge. The present review provides general overview of analytical methods for the determination of neonicotinoid pesticides and their metabolites in honeybee products and honeybee.

High-throughput subzero-temperature assisted homogenous liquid-liquid extraction for the fast sample preparation of multiple phenolic compounds in propolis.

In the present study, a high-throughput homogenous liquid-liquid extraction method was developed for fast sample preparation of multiple phenolic compounds in propolis. This method was proposed based on cooling samples array in subzero temperature to induce phase separation of ACN-H2O extractant. Due to the high-throughput ability, optimization of extraction parameters was rapidly achieved by using a 5 × 4 × 3 samples array. In addition, multiple arrays were investigated for evaluating the analytical performance of the high-throughput method, which indicated that limits of detection and quantification were ranged from 0.04 to 0.35 µg/mL and 0.12 to 1.05 µg/mL, respectively. Recoveries and precisions in inter-day high-throughput studies were in the range of 90.55-105.50% and 2.58-4.30%, respectively. Comparing with the conventional liquid extraction method, this ecofriendly high-throughput method presented remarkable advantages in reducing sample and chemical consumption, as well as saving labor and time cost. The proposed method might provide a valuable strategy for the design of high-throughput extraction procedures.

Fluorescent gold nanoparticles-based fluorescence sensor for Cu2+ ions.

A new fluorescence sensor for the highly selective detection of Cu2+ ion with a detection limit of 3.6 nM based on the aggregation-induced fluorescence quenching of the highly fluorescent glutathione-capped gold nanoparticles is reported.

Comparison of salting-out and sugaring-out liquid-liquid extraction methods for the partition of 10-hydroxy-2-decenoic acid in royal jelly and their co-extracted protein content.

Homogeneous liquid-liquid extraction (h-LLE) has been receiving considerable attention as a sample preparation method due to its simple and fast partition of compounds with a wide range of polarities. To better understand the differences between the two h-LLE extraction approaches, salting-out assisted liquid-liquid extraction (SALLE) and sugaring-out assisted liquid-liquid extraction (SULLE), have been compared for the partition of 10-hydroxy-2-decenoic acid (10-HDA) from royal jelly, and for the co-extraction of proteins. Effects of the amount of phase partition agents and the concentration of acetonitrile (ACN) on the h-LLE were discussed. Results showed that partition efficiency of 10-HDA depends on the phase ratio in both SALLE and SULLE. Though the partition triggered by NaCl and glucose is less efficient than MgSO4 in the 50% (v/v) ACN-water mixture, their extraction yields can be improved to be similar with that in MgSO4 SALLE by increasing the initial concentration of ACN in the ACN-water mixture. The content of co-extracted protein was correlated with water concentration in the obtained upper phase. MgSO4 showed the largest protein co-extraction at the low concentration of salt. Glucose exhibited a large protein co-extraction in the high phase ratio condition. Furthermore, NaCl with high initial ACN concentration is recommended because it produced high extraction yield for 10-HDA and the lowest amount of co-extracted protein. These observations would be valuable for the sample preparation of royal jelly.

Soxhlet-assisted matrix solid phase dispersion to extract flavonoids from rape (Brassica campestris) bee pollen.

Soxhlet-assisted matrix solid phase dispersion (SA-MSPD) method was developed to extract flavonoids from rape (Brassica campestris) bee pollen. Extraction parameters including the extraction solvent, the extraction time, and the solid support conditions were investigated and optimized. The best extraction yields were obtained using ethanol as the extraction solvent, silica gel as the solid support with 1:2 samples to solid support ratio, and the extraction time of one hour. Comparing with the conventional solvent extraction and Soxhlet method, our results show that SA-MSPD method is a more effective technique with clean-up ability. In the test of six different samples of rape bee pollen, the extracted content of flavonoids was close to 10mg/g. The present work provided a simple and effective method for extracting flavonoids from rape bee pollen, and it could be applied in the studies of other kinds of bee pollen.

High-performance liquid chromatography combined with intrinsic fluorescence detection to analyse melittin in individual honeybee (Apis mellifera) venom sac.

Melittin is the major toxin peptide in bee venom, which has diverse biological effects. In the present study, melittin was separated by reverse-phase high-performance liquid chromatography, and was then detected using intrinsic fluorescence signal of tryptophan residue. The accuracy, linearity, limit of quantitation (LOQ), intra-day and inter-day precision of the method were carefully validated in this study. Results indicate that the intrinsic fluorescence signal of melittin has linear range from 0.04µg/mL to 20µg/mL with LOQ of 0.04µg/mL. The recovery range of spiked samples is between 81.93% and 105.25%. The precision results are expressed as relative standard deviation (RSD), which is in the range of 2.1-7.4% for intra-day precision and 6.2-10.8% for inter-day precision. Because of the large linear dynamic range and the high sensitivity, intrinsic fluorescence detection (IFD) can be used for analyzing melittin contents in individual venom sac of honeybee (Apis mellifera). The detected contents of melittin in individual bee venom sac are 0.18±0.25µg for one-day old honeybees (n=30), and 114.98±43.51µg for 25-day old (n=30) honeybees, respectively. Results indicate that there is large bee-to-bee difference in melittin contents. The developed method can be useful for discovering the melittin related honeybee biology information, which might be covered in the complex samples.