Air-permeable redox mediated transcutaneous CO2 sensor.

Standard clinical care of neonates and the ventilation status of human patients affected with coronavirus disease involves continuous CO2 monitoring. However, existing noninvasive methods are inadequate owing to the rigidity of hard-wired devices, insubstantial gas permeability and high operating temperature. Here, we report a cost-effective transcutaneous CO2 sensing device comprising elastomeric sponges impregnated with oxidized single-walled carbon nanotubes (oxSWCNTs)-based composites. The proposed device features a highly selective CO2 sensing response (detection limit 155 ± 15 ppb), excellent permeability and reliability under a large deformation. A follow-up prospective study not only offers measurement equivalency to existing clinical standards of CO2 monitoring but also provides important additional features. This new modality allowed for skin-to-skin care in neonates and room-temperature CO2 monitoring as compared with clinical standard monitoring system operating at high temperature to substantially enhance the quality for futuristic applications.

Nanoporosity Change on Elastic Relaxation of Partially Folded Graphene Monoliths.

Fabrication of nanographene shows a promising route for production of designed porous carbons, which is indispensable for highly efficient molecular separation and energy storage applications. This process requires a better understanding of the mechanical properties of nanographene in their aggregated structure. We studied the structural and mechanical properties of nanographene monoliths compressed at 43 MPa over different times from 3 to 25 h. While in monoliths compressed over shorter time adsorption isotherms of Ar at 87 K or N2 at 77 K exhibited a prominent hysteresis due to presence of predominant mesopores, compression for long time induces a low pressure hysteresis. On the other hand, compression for 25 h increases the microporosity evaluated by Ar adsorption, not by N2 adsorption, indicating that 25 h compression rearranges the nanographene stacking structure to produce ultramicropores that can be accessible only for Ar. TEM, X-ray diffraction, and Raman spectroscopic studies indicated that the compression for 25 h unfolds double-bent-like structures, relaxing the unstable nanographene stacked structure formed on the initial compression without nanographene sheets collapse. This behavior stems from the highly elastic nature of the nanographenes.

Water Adsorption Property of Hierarchically Nanoporous Detonation Nanodiamonds.

The detonation nanodiamonds form the aggregate having interparticle voids, giving a marked hygroscopic property. As the relationship between pore structure and water adsorption of aggregated nanodiamonds is not well understood yet, adsorption isotherms of N2 at 77 K and of water vapor at 298 K of the well-characterized aggregated nanodiamonds were measured. HR-TEM and X-ray diffraction showed that the nanodiamonds were highly crystalline and their average crystallite size was 4.5 nm. The presence of the graphitic layers on the nanodiamond particle surface was confirmed by the EELS examination. The pore size distribution analysis showed that nanodiamonds had a few ultramicropores with predominant mesopores of 4.5 nm in average size. The water vapor adsorption isotherm of IUPAC Type V indicates the hydrophobicity of the nanodiamond aggregates, with the presence of hydrophilic sites. Then the hygroscopic nature of nanodiamonds should be associated with the surface functionalities of the graphitic shell and the ultramicropores on the mesopore walls.

Experimental Information on the Adsorbed Phase of Water Formed in the Inner Pore of Single-Walled Carbon Nanotube Itself.

Thus far, nobody has successfully obtained the accurate information on the properties of the adsorbed phases of gases or vapors formed inside a cylindrical micropore of single-walled carbon nanotube (SWCNT) itself based on the experimental procedure. In this work, we succeeded in analyzing experimentally the properties of adsorbed nitrogen and water confined in the inner pore of SWCNT itself by opening the pore composed of close-ended SWCNT without any changes in the surface state and also by applying the unique method for characterization; both the amounts, as well as properties, of surface functional groups and the bundle structure are the same even after the treatments for introducing an open-ended structure to a close-ended one. As a result, the average pore sizes, as well as characteristic adsorption behavior, on the two types of sample were available from the analysis of respective difference adsorption isotherms of nitrogen measured at 77 K between the adsorbed amounts on the open-ended SWCNT and that on the close-ended one. The evaluated pore sizes well coincide with the results estimated by Raman data. These results strongly support that we could analyze the adsorbed phases formed only in the inner pore of SWCNTs by applying the present method. Furthermore, we could analyze the adsorbed phase of water formed inside the cylindrical micropore of SWCNTs, showing the difference in the densities of adsorbed water depending on the pore sizes from the value of bulk water; the densities of the adsorbed water were evaluated to be 0.62 and 0.71 g mL(-1) for SWCNTs having average pore sizes of 1.3 and 1.7 nm, respectively, which were in harmony with those obtained by the theoretical calculations reported by other researchers. The proposed analysis method makes it possible to recognize the focused states of the adsorbed water formed inside the cylindrical micropore of SWCNT more precisely and correctly. The method proposed will shed light on the discussion related to the detailed nature of various adsorbed gases into SWCNT, to the detailed role of adsorbed species formed inside pore in various phenomena, and to the designing the useful materials based on the gained knowledge.

Transient chemical and structural changes in graphene oxide during ripening.

Graphene oxide (GO)-the oxidized form of graphene-is actively studied in various fields, such as energy, electronic devices, separation of water, materials engineering, and medical technologies, owing to its fascinating physicochemical properties. One major drawback of GO is its instability, which leads to the difficulties in product management. A physicochemical understanding of the ever-changing nature of GO can remove the barrier for its growing applications. Here, we evidencde the presence of intrinsic, metastable and transient GO states upon ripening. The three GO states are identified using a [Formula: see text] transition peak of ultraviolet-visible absorption spectra and exhibit inherent magnetic and electrical properties. The presence of three states of GO is supported by the compositional changes of oxygen functional groups detected via X-ray photoelectron spectroscopy and structural information from X-ray diffraction analysis and transmission electron microscopy. Although intrinsic GO having a [Formula: see text] transition at 230.5 ± 0.5 nm is stable only for 5 days at 298 K, the intrinsic state can be stabilized by either storing GO dispersions below 255 K or by adding ammonium peroxydisulfate.

Direct Evidence of Reversible SnO2-Li Reactions in Carbon Nanospaces.

We present herein that carbon nanospaces are the key reaction space to improve the reversibility of the reaction of SnO2 with Li-ions for lithium-ion batteries, demonstrated by both ex situ and in situ observations using high-resolution scanning transmission electron microscopy with electron energy loss spectroscopy. Conversion-type electrode materials, such as SnO2, undergo large volume changes and phase separation during the charge-discharge process, which lead to degradation in the battery performance. By confining the SnO2-Li reaction within carbon nanopores, the battery performance is improved. However, the exact phase changes of SnO2 in the nanospaces are unclear. By directly observing the electrodes during the charge-discharge process, the carbon walls are capable of preventing the expansion of SnO2 particles and minimizing the conversion-induced phase separation of Sn and Li2O on the sub-nanometer scale. Thus, nanoconfinement structures can effectively improve the reversibility performance of conversion-type electrode materials.

Selective probe of the morphology and local vibrations at carbon nanoasperities.

We introduce a way to selectively probe local vibration modes at nanostructured asperities such as tips of carbon nanohorns. Our observations benefit from signal amplification in surface-enhanced Raman scattering (SERS) at sites near a silver surface. We observe nanohorn tip vibration modes in the range 200-500 cm(-1), which are obscured in regular Raman spectra. Ab initio density functional calculations assign modes in this frequency range to local vibrations at the nanohorn cap resembling the radial breathing mode of fullerenes. Careful interpretation of our SERS spectra indicates presence of caps with 5 or 6 pentagons, which are chemically the most active sites. Changes in the peak intensities and frequencies with time indicate that exposure to laser irradiation may cause structural rearrangements at the cap.

Mitigation of Edge and Surface States Effects in Two-Dimensional WS2 for Photocatalytic H2 Generation.

Large scale development of the 2D transition metal di-chalcogenides (TMDC) relies on landmark improvement in performance, which could emerge from nanostructuration. Using p-WS2 nanoflakes with different degrees of exfoliation and fracturing, perspectives were provided to develop high-surface-area 2D p-WS2 films for the photocatalytic hydrogen generation. The critical role of inter-nanoflakes contacts within high-surface-area 2D films was demonstrated, highlighting the benefit of plane/plane versus edge/plane contacts. Evidence of the high density of surface states displayed by these 2D films was provided through electrochemical measurements. In addition to operating as recombination centers, the surface states were shown to give rise to deleterious Fermi-level pinning (FLP), which dramatically decreased the efficiency of charge carrier separation. Lastly, promising strategies yielding FLP suppression via surface states modification were proposed. In particular, use of a multifunctional ultrathin film displaying healing, catalytic, and n-type semiconduction properties was shown to greatly enhance charge carrier separation and transport to the photo-electrode/electrolyte interface. When the 2D photoelectrodes were fabricated with the above prerequisites (i. e., a high proportion of plane/plane contacts and a successful surface states chemical modification), a photocurrent up to 4.5 mA cm-2 was achieved for the first time on 2D p-WS2 photocathodes for hydrogen generation.

Anomaly of CH4 molecular assembly confined in single-wall carbon nanohorn spaces.

Vibrational-rotational properties of CH(4) adsorbed on the nanopores of single-wall carbon nanohorns (SWCNHs) at 105-140 K were investigated using IR spectroscopy. The difference vibrational-rotational bands of the ν(3) and ν(4) modes below 130 K show suppression of the P and R branches, while the Q branches remain. The widths of the Q branches are much narrower than in the bulk gas phase due to suppression of the Doppler effect. These results indicate that the rotation of CH(4) confined in the nanospaces of SWCNHs is highly restricted, resulting in a rigid assembly structure, which is an anomaly in contrast to that in the bulk liquid phase.

Confinement in carbon nanospace-induced production of KI nanocrystals of high-pressure phase.

An outstanding compression function for materials preparation exhibited by nanospaces of single-walled carbon nanohorns (SWCNHs) was studied using the B1-to-B2 solid phase transition of KI crystals at 1.9 GPa. High-resolution transmission electron microscopy and synchrotron X-ray diffraction examinations provided evidence that KI nanocrystals doped in the nanotube spaces of SWCNHs at pressures below 0.1 MPa had the super-high-pressure B2 phase structure, which is induced at pressures above 1.9 GPa in bulk KI crystals. This finding of the supercompression function of the carbon nanotubular spaces can lead to the development of a new compression-free route to precious materials whose syntheses require the application of high pressure.

Evidence of dynamic pentagon-heptagon pairs in single-wall carbon nanotubes using surface-enhanced Raman scattering.

Surface-enhanced Raman scattering (SERS) was applied to detecting pentagon-heptagon pairs, the so-called Stone-Wales defect, in single-wall carbon nanotubes (SWCNTs). When a probing laser light was scanned over a SWCNT-dispersed silver surface, two distinct SERS spectra were obtained: (1) temporally stable spectra similar to that of resonance Raman spectra of bulk SWCNTs and (2) temporally fluctuating spectra with additional peaks which were not observed in the non-SERS spectra. The fluctuations in the SERS spectra are discussed in association with dynamic reconstruction of defective structures of SWCNTs (nonhexagonal arrangements of carbon atoms) in the vicinity of SERS-active sites under irradiation of the laser light.

Effect of a quaternary ammonium salt on propylene carbonate structure in slit-shape carbon nanopores.

The effect of addition of tetraethylammonium tetrafluoroborate (Et(4)NBF(4)) on the structure of propylene carbonate (PC) confined in slit-shaped carbon nanopores of activated carbon fiber (pore width = 1.0 nm) was studied by synchrotron X-ray diffraction and reverse Monte Carlo simulation. PC molecules are randomly packed in the slit carbon nanopores of 1 nm in the absence of Et(4)NBF(4). Addition of Et(4)N(+) and BF(4)(-) ions promotes formation of considerably ordered double layers of PC molecules even in the highly restricted slit pore space. PC molecules can accept these ions efficiently. This structural modulation function of PC molecular assemblies should contribute to the evolution of supercapacitance in carbon nanopores.

Direct evidence for atomic defects in graphene layers.

Atomic-scale defects in graphene layers alter the physical and chemical properties of carbon nanostructures. Theoretical predictions have recently shown that energetic particles such as electrons and ions can induce polymorphic atomic defects in graphene layers as a result of knock-on atom displacements. However, the number of experimental reports on these defects is limited. The graphite network in single-walled carbon nanotubes has been visualized by transmission electron microscopy (TEM) and their chiral indices have been determined. But the methods used require a long image acquisition time and intensive numerical treatments after observations to find an 'average' image, which prevents the accurate detection and investigation of defect structures. Here we report observations in situ of defect formation in single graphene layers by high-resolution TEM. The observed structures are expected to be of use when engineering the properties of carbon nanostructures for specific device applications.

Enhanced hydrogen adsorptivity of single-wall carbon nanotube bundles by one-step c60-pillaring method.

Single-wall carbon nanotube (SWCNT) bundles were pillared by fullerene (C60) by the cosonication of C60 and SWCNT in toluene to utilize the interstitial pores for hydrogen storage. C60-pillared SWCNTs were confirmed by the shift in the X-ray diffraction peak and the expanded hexagonal and distorted tetragonal bundles revealed by high-resolution transmission electron microscopy. The H2 adsorptivity of the C60-pillared SWCNT bundles was twice that of the original SWCNT bundles, indicating a design route for SWCNT hydrogen storage.

SnO2-Embedded Nanoporous Carbon Electrode with a Reaction-Buffer Space for Stable All-Solid-State Li Ion Batteries.

The conventional approach for fabricating all-solid-state batteries has required a highly dense layer of electrode and electrolyte. Their close contact interface is not suitable for alloy- or conversion-based active materials because their large volume change in lithiation/delithiation reactions causes a collapse of the contact interface or reaction limitations under mechanical constriction. In this study, we propose that a SnO2-embedded porous carbon electrode shows high cyclability and high capacity even at high constraint pressure owing to the nanopores, which work as a buffer space for the large volume change accompanied with SnO2-Sn conversion reaction and Sn-Li alloying-dealloying reaction. A detailed investigation between structural parameters of the electrode material and charge-discharge properties revealed Li ion conduction in carbon nanopores from a solid electrolyte located outside as well as the optimal conditions to yield high performance. SnO2-loading (75 wt %) in carbon nanopores, which provides the buffer space corresponding to the inevitable volume expansion by full lithiation, brought out an excellent performance at room temperature superior to that in an organic liquid electrolyte system: a high capacity of 1023 mAh/g-SnO2 at 50 mA/g, high capacity retention of 97% at 300th cycle at 300 mA/g, and high rate capability with over 75% capacity retention at 1000 against 50 mA/g, whose values are also superior to the system using the organic liquid electrolyte.

Adsorption enhancement of nitrogen gas by atomically heterogeneous nanospace of boron nitride.

In this study, porous boron nitride (p-BN) with hexagonal phase boron nitride (h-BN) pore walls was synthesized using high-temperature calcination. Negligible variation in pore-wall structure can be observed in powder X-ray diffraction (XRD) profiles and infrared (IR) spectra. However, a highly stable p-BN with a stable pore structure even at 973 K under the oxidative conditions is obtained when synthesized at higher than 1573 K under nitrogen gas flow. For p-BN, this stability is obtained by generating h-BN microcrystals. Nitrogen adsorption-desorption isotherms at 77 K provide type-IV features and typical adsorption-desorption hysteresis, which suggests micropore and mesopore formation. Moreover, adsorption-desorption isotherms of Ar at 87 K are measured and compared with those of nitrogen. The relative adsorbed amount of nitrogen (i.e., the amount of nitrogen normalized by that of Ar at each relative pressure or adsorption potential value) on p-BN is considerably larger than that on microporous carbon at low-pressure regions, which suggests the existence of strong adsorption sites on the p-BN surface. In fact, the relative number of adsorbed nitrogen molecules to that of Ar on p-BN is, at most, 150%-200% larger than that on microporous carbon for the same adsorption potential state. Furthermore, additional adsorption enhancement to nitrogen between P/P 0 = 10-5 and 10-3 can be observed for p-BN treated at 1673 K, which suggests the uniformly adsorbed layer formation of nitrogen molecules in the vicinity of a basal planar surface. Thus, unlike typical nanoporous sp2 carbons, p-BN materials have the potential to enhance adsorption for certain gas species because of their unique surface state.

New insights into the heat of adsorption of water, acetonitrile, and n-hexane in porous carbon with oxygen functional groups.

Isosteric heat of adsorption is exquisitely sensitive to structural changes in carbon surfaces based on the energetic behavior of the interactions between adsorbates and carbon materials. We discuss the relationships between porous structures, oxygen functional groups, and heat of adsorption based on the behavior of the heat of adsorption of polar and non-polar fluids on porous carbon materials with oxygen functional groups. The porosity and functional groups of porous carbon materials were estimated from N2 adsorption isotherms at 77 K and temperature-programmed desorption. High-resolution adsorption isotherms of water, acetonitrile (polar fluid), and n-hexane (non-polar fluid) were measured on porous carbon materials with different pore size distributions and amounts of oxygen functional groups at various temperatures. The heats of adsorption were determined by applying the Clausius-Clapeyron equation to the adsorption isotherms. The heat of adsorption curves directly reflect the effects of interactions of fluid-oxygen functional groups, fluid-basal planes of pore walls, and fluid-fluid interfaces. In particular, the heat of adsorption curve of water is very sensitive to surface oxygen functional groups. This finding indicates the possibility of estimating the relative amounts of oxygen functional groups on porous carbon materials based on the amounts of water adsorbed at specific relative pressures.

Nanoporosities and catalytic activities of Pd-tailored single wall carbon nanohorns.

The nanoporosities and catalytic activities of Pd nanoparticles dispersed on single wall carbon nanohorns (Pd-SWCNHs) and oxidized single wall carbon nanohorns (Pd-ox-SWCNHs) were examined. A transmission electron microscopy (TEM) observation indicated that Pd nanoparticles of 2-3 nm size were highly dispersed on both the SWCNHs. X-ray photoelectron spectra and N2 adsorption isotherms at 77 K illustrated the differences in the deposition process mechanisms of the Pd-SWCNHs and Pd-ox-SWCNHs; the deposition process depended on the surface functional groups. The supercritical H2 adsorption isotherms at 77 K suggested the relationships between the interaction of Pd-SWCNHs and Pd-ox-SWCNHs with H2 and the catalytic activities for a water formation reaction in a gas phase at 273 or 298 K. The catalytic activity measurement and TEM observation of the catalysts after the reactions demonstrated that the Pd-SWCNHs and Pd-ox-SWCNHs are promising catalysts.

High capacity and stable all-solid-state Li ion battery using SnO2-embedded nanoporous carbon.

Extensive research efforts are devoted to development of high performance all-solid-state lithium ion batteries owing to their potential in not only improving safety but also achieving high stability and high capacity. However, conventional approaches based on a fabrication of highly dense electrode and solid electrolyte layers and their close contact interface is not always applicable to high capacity alloy- and/or conversion-based active materials such as SnO2 accompanied with large volume change in charging-discharging. The present work demonstrates that SnO2-embedded nanoporous carbons without solid electrolyte inside the nanopores are a promising candidate for high capacity and stable anode material of all-solid-state battery, in which the volume change reactions are restricted in the nanopores to keep the constant electrode volume. A prototype all-solid-state full cell consisting of the SnO2-based anode and a LiNi1/3Co1/3Mn1/3O2-based cathode shows a good performance of 2040 Wh/kg at 268.6 W/kg based on the anode material weight.