Controlling Homogenous Spherulitic Crystallization for High-Efficiency Planar Perovskite Solar Cells Fabricated under Ambient High-Humidity Conditions.

The influence of precursor solution properties, fabrication environment, and antisolvent properties on the microstructural evolution of perovskite films is reported. First, the impact of fabrication environment on the morphology of methyl ammonium lead iodide (MAPbI3 ) perovskite films with various Lewis-base additives is reported. Second, the influence of antisolvent properties on perovskite film microstructure is investigated using antisolvents ranging from nonpolar heptane to highly polar water. This study shows an ambient environment that accelerates crystal growth at the expense of nucleation and introduces anisotropies in crystal morphology. The use of antisolvents enhances nucleation but also influences ambient moisture interaction with the precursor solution, resulting in different crystal morphology (shape, size, dispersity) in different antisolvents. Crystal morphology, in turn, dictates film quality. A homogenous spherulitic crystallization results in pinhole-free films with similar microstructure irrespective of processing environment. This study further demonstrates propyl acetate, an environmentally benign antisolvent, which can induce spherulitic crystallization under ambient environment (52% relative humidity, 25 °C). With this, planar perovskite solar cells with ≈17.78% stabilized power conversion efficiency are achieved. Finally, a simple precipitation test and in situ crystallization imaging under an optical microscope that can enable a facile a priori screening of antisolvents is shown.

The first demonstration of entirely roll-to-roll fabricated perovskite solar cell modules under ambient room conditions.

The rapid development of organic-inorganic hybrid perovskite solar cells has resulted in laboratory-scale devices having power conversion efficiencies that are competitive with commercialised technologies. However, hybrid perovskite solar cells are yet to make an impact beyond the research community, with translation to large-area devices fabricated by industry-relevant manufacturing methods remaining a critical challenge. Here we report the first demonstration of hybrid perovskite solar cell modules, comprising serially-interconnected cells, produced entirely using industrial roll-to-roll printing tools under ambient room conditions. As part of this development, costly vacuum-deposited metal electrodes are replaced with printed carbon electrodes. A high-throughput experiment involving the analysis of batches of 1600 cells produced using 20 parameter combinations enabled rapid optimisation over a large parameter space. The optimised roll-to-roll fabricated hybrid perovskite solar cells show power conversion efficiencies of up to 15.5% for individual small-area cells and 11.0% for serially-interconnected cells in large-area modules. Based on the devices produced in this work, a cost of ~0.7 USD W-1 is predicted for a production rate of 1,000,000 m² per year in Australia, with potential for further significant cost reductions.

Synthesis of poly(p-phenylene-vinylene) derivatives containing an oxadiazole pendant group and their applications to organic electronic devices.

Poly(p-phenylene vinylene) (PPV) derivatives with 2,5-diphenyl-1,3,4-oxadiazole-diyl (OXD) as the side chain, poly[2-{4-[5-(4-(heptyloxy)phenyl)-1,3,4-oxadiazole-2-yI]phenyl-oxy}-1,4-phenylene-vinylene] (OXH-PPV), poly[2-{4-[5-(4-(heptyloxy)phenyl)-1,3,4-oxadia-zole-2-yl]phenyl-oxy}-1,4-phenylenevinylene-co-2-methoxy-5-(2'-ethylhexyloxy)-p-phenylene vinylene] (OXH-PPV-co-MEH-PPV), and poly[2-methoxy-5-(2'-ethylhexyl-oxy)-p-phenylene vinylene] (MEH-PPV), were synthesized via a modified Gilch route. The electron-deficient oxadiazole moiety was introduced on the side chain of the polymer backbone to increase the electron-affinity of the polymers. The electroluminescent (EL) properties of the resulting polymers as an active layer, were investigated by the fabrication of single-layer LEDs and the devices using OXH-PPV-co-MEH-PPV showed better EL properties than those using pure MEH-PPV. Also, to investigate the switching properties of the resulting polymers as an active layer, OFET devices were fabricated in a top-contact/bottom-gate configuration. The resulting FETs exhibited typical p-channel characteristics, field-effect mobility of 6.5 x 10(-4) - 7.0 x 10(-5) cm2 V(-1) s(-1), and on-off ratio of about 10(4)-10(5).

Printable Perovskite Diodes for Broad-Spectrum Multienergy X-Ray Detection.

Multienergy X-ray detection is critical to effectively differentiate materials in a variety of diagnostic radiology and nondestructive testing applications. Silicon and selenium X-ray detectors are the most common for multienergy detection; however, these present poor energy discrimination across the broad X-ray spectrum and exhibit limited spatial resolution due to the high thicknesses required for radiation attenuation. Here, an X-ray detector based on solution-processed thin-film metal halide perovskite that overcomes these challenges is introduced. By harnessing an optimized n-i-p diode configuration, operation is achieved across a broad range of soft and hard X-ray energies stemming from 0.1 to 10's of keV. Through detailed experimental and simulation work, it is shown that optimized Cs0.1 FA0.9 PbI3 perovskites effectively attenuate soft and hard X-rays, while also possessing excellent electrical properties to result in X-ray detectors with high sensitivity factors that exceed 5 × 103 µ C G y Vac - 1 cm - 2 $\mu {\rm{C}}\;{{\bf Gy}}_{{\rm{Vac}}}^{ - 1}\;{\rm{c}}{{\rm{m}}^{ - 2}}$ and 6 × 104 µC Gy-1 cm-2 within soft and hard X-ray regimes, respectively. Harnessing the solution-processable nature of the perovskites, roll-to-roll printable X-ray detectors on flexible substrates are also demonstrated.

Beyond Fullerenes: Indacenodithiophene-Based Organic Charge-Transport Layer toward Upscaling of Low-Cost Perovskite Solar Cells.

Phenyl-C61-butyric acid methyl ester (PCBM) is universally used as the electron-transport layer (ETL) in the low-cost inverted planar structure of perovskite solar cells (PeSCs). PCBM brings tremendous challenges in upscaling of PeSCs using industry-relevant methods due to its aggregation behavior, which undermines the power conversion efficiency and stability. Herein, we highlight these, seldom reported, challenges with PCBM. Furthermore, we investigate the potential of nonfullerene indacenodithiophene (IDT)-based molecules by employing a commercially available variant, 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3- d:2',3'- d']- s-indaceno[1,2- b:5,6- b'] dithiophene (ITIC), as a PCBM replacement in ambient-processed PeSCs. Films fabrication by laboratory-based spin-coating and industry-relevant slot-die coating methods are compared. Although similar power-conversion efficiencies are achieved with both types of ETL in a simple device structure fabricated by spin-coating, the nanofibriller morphology of ITIC compared to the aggregated morphology of PCBM films enables improved mechanical integrity and stability of ITIC devices. Upon slot-die coating, the aggregation of PCBM is exacerbated, leading to significantly lower power-conversion efficiency of devices than spin-coated PCBM as well as slot-die-coated ITIC devices. Our results clearly indicate that IDT-based molecules have great potential as an ETL in PeSCs, offering superior properties and upscaling compatibility than PCBM. Thus, we present a short summary of recently emerged nonfullerene IDT-based molecules from the field of organic solar cells and discuss their scope in PeSCs as electron or hole-transport layer.

Synthesis of a new cross-linkable perfluorocyclobutane-based hole-transport material.

[reaction: see text] A new curable arylamine containing a perfluorocyclobutane (PFCB) structure without an acidic group was synthesized. The material was thermally cured on ITO after spin-coating. The polymer showed excellent solvent resistance, high thermal stability, high transparency, and good surface smoothness.

Differentially pumped spray deposition as a rapid screening tool for organic and perovskite solar cells.

We report a spray deposition technique as a screening tool for solution processed solar cells. A dual-feed spray nozzle is introduced to deposit donor and acceptor materials separately and to form blended films on substrates in situ. Using a differential pump system with a motorised spray nozzle, the effect of film thickness, solution flow rates and the blend ratio of donor and acceptor materials on device performance can be found in a single experiment. Using this method, polymer solar cells based on poly(3-hexylthiophene) (P3HT):(6,6)-phenyl C61 butyric acid methyl ester (PC61BM) are fabricated with numerous combinations of thicknesses and blend ratios. Results obtained from this technique show that the optimum ratio of materials is consistent with previously reported values confirming this technique is a very useful and effective screening method. This high throughput screening method is also used in a single-feed configuration. In the single-feed mode, methylammonium iodide solution is deposited on lead iodide films to create a photoactive layer of perovskite solar cells. Devices featuring a perovskite layer fabricated by this spray process demonstrated a power conversion efficiencies of up to 7.9%.

Synthesis of a double spiro-polyindenofluorene with a stable blue emission.

[reaction: see text] A novel polyindenofluorene containing a double spiro-anthracene structure with solublizing alkyl groups was synthesized. Enhanced spectral stability of the polymer was investigated by heat treatment and photoirradiation in air. The EL spectrum of the polymer showed an enhanced sensitivity to the human eye and good color purity as a blue-emitting material.

Photonic Sintering of Copper through the Controlled Reduction of Printed CuO Nanocrystals.

The ability to control chemical reactions using ultrafast light exposure has the potential to dramatically advance materials and their processing toward device integration. In this study, we show how intense pulsed light (IPL) can be used to trigger and modulate the chemical transformations of printed copper oxide features into metallic copper. By varying the energy of the IPL, CuO films deposited from nanocrystal inks can be reduced to metallic Cu via a Cu2O intermediate using single light flashes of 2 ms duration. Moreover, the morphological transformation from isolated Cu nanoparticles to fully sintered Cu films can also be controlled by selecting the appropriate light intensity. The control over such transformations enables for the fabrication of sintered Cu electrodes that show excellent electrical and mechanical properties, good environmental stability, and applications in a variety of flexible devices.

Toward large scale roll-to-roll production of fully printed perovskite solar cells.

Fully printed perovskite solar cells are demonstrated with slot-die coating, a scalable printing method. A sequential slot-die coating process is developed to produce efficient perovskite solar cells and to be used in a large-scale roll-to-roll printing process. All layers excluding the electrodes are printed and devices demonstrate up to 11.96% power conversion efficiency. It is also demonstrated that the new process can be used in roll-to-roll production.

Organic solar cells using a high-molecular-weight benzodithiophene-benzothiadiazole copolymer with an efficiency of 9.4%.

A high molecular weight donor-acceptor conjugated polymer is synthesized using the Suzuki polycondensation method. Using this polymer, a single-junction bulk-heterojunction solar cell is fabricated giving a power conversion efficiency of 9.4% using a fullerene-modified ZnO interlayer at the cathode contact.

Ambipolar hexa-peri-hexabenzocoronene-fullerene hybrid materials.

A new class of self-assembling hexa-peri-hexbenzocoronene (HBC)-fullerene hybrid materials has been synthesized and characterized. Photoluminescence experiments indicate that energy transfer processes can be tuned in these donor-acceptor systems by varying the length and nature of the linker group. In preliminary device testing, ambipolar charge transport behavior is observed in organic field effect transistors, while single active component organic photovoltaic devices consisting of these materials achieved a maximum external quantum efficiency of 30%.

Solvent effects on resonant first hyperpolarizabilities and Raman and hyper-Raman spectra of DANS and a water-soluble analog.

The two-photon-resonant first hyperpolarizabilities associated with hyper-Rayleigh and hyper-Raman scattering are reported for 4-dimethylamino-4-nitrostilbene in 1,4-dioxane, dichloromethane, acetonitrile, and methanol, and for an ionic analog, 4-N,N-bis(6-(N,N,N-trimethylammonium)-hexyl)amino-4-nitrostilbene dibromide in methanol and water. Resonance Raman and hyper-Raman excitation profiles are also measured and modeled. The resonance Raman and hyper-Raman spectra show very similar relative intensities which do not vary much as the excitation frequency is tuned across the lowest-energy strong linear absorption band, suggesting that a single resonant electronic state dominates the one- and two-photon absorptions in this region. The absorption, resonance Raman, and hyper-Raman profiles can be simulated reasonably well with a common set of parameters. The peak resonant (absolute value of beta)2, measured by hyper-Rayleigh scattering, varies by about 50% over the range of solvents examined and shows a weak correlation with the linear absorption maximum, with the redder-absorbing systems exhibiting larger peak hyperpolarizabilities. The experimental hyper-Rayleigh intensities are higher than those calculated, possibly reflecting contributions from nonresonant electronic states.

Silver nanocrystal-modified silicon nanowires as substrates for surface-enhanced Raman and hyper-Raman scattering.

Metal catalyzed, CVD-grown silicon nanowires decorated by chemical assembly of closely spaced Ag nanocrystals were modified with the well-known "silver mirror" reaction and investigated as substrates for surface-enhanced Raman (SERS) and hyper-Raman (SEHRS) spectroscopy. Four chromophores were examined: Rhodamine 6G, crystal violet, a cyanine dye, and a cationic donor-acceptor substituted stilbene. After soaking the substrates overnight in 10(-4) M aqueous chromophore solutions, all four chromophores gave good-quality SERS spectra in < or =60 s using <1 microW of 458-nm cw laser power, and SEHRS spectra are obtained in < or =120 s using <1 mW of mode-locked 916-nm laser power. Results from this substrate are compared with those on colloidal silver nanoparticles deposited as a film, as well as surfaces grown by the silver mirror reaction.