RESUMO
The objective of this work was the development and validation of atomic absorption spectrometric (AAS) methods for the determination of residual active pharmaceutical ingredients (API) in rinse samples for cleaning validation. AAS as an indirect method for the determination of API in rinse samples can be applied when it is in the form of salt with metal ions or when the metal ion is a part of the API's structure. The electrothermal AAS methods (aqueous and ethanol medium) for the determination of magnesium in esomeprazole magnesium and the flame AAS method for the determination of lithium in lithium carbonate in rinse samples were developed. Various combinations of solvents were tested and a combination of 1% aqueous or ethanol solution of nitric acid for esomeprazole magnesium and 0.1% aqueous solution of nitric acid for lithium carbonate were found to be the most suitable. The atomization conditions in the graphite furnace and in the flame were carefully studied to avoid losses of analyte and to achieve suitable sensitivity. The cleaning verification methods were validated with respect to accuracy, precision, linearity, limit of detection, and quantification. In all the cases, the limits of detection were at the microgram level. The methods were successfully applied for the determination of esomeprazole magnesium and lithium carbonate in rinse samples from cleaning procedures.
Assuntos
Contaminação de Equipamentos/prevenção & controle , Esomeprazol/análise , Carbonato de Lítio/análise , Preparações Farmacêuticas/análise , Espectrofotometria Atômica/métodos , Antiulcerosos/análise , Antiulcerosos/química , Antimaníacos/análise , Antimaníacos/química , Esomeprazol/química , Etanol/química , Modelos Lineares , Lítio/análise , Carbonato de Lítio/química , Magnésio/análise , Reprodutibilidade dos Testes , Água/químicaRESUMO
The physical processes controlling the desorption of some elements (B, Cd, Co, Mn, Ni, and Sr) from soils in a continuous leaching system representing the human stomach are investigated here by fitting experimental leaching data to a mathematical particle diffusion model. Soil samples (50 mg) from Cornwall, UK, contained in a flow-through extraction chamber (ca. 6.5 mL) were intimately contacted with artificial gastric solution at various flow rates (0.42-1.42 mL min(-1)) for up to ca. 4 h, followed by analysis of the fractions collected with inductively coupled plasma mass spectrometry (ICP-MS). The leaching profiles of the various elements were fitted to a mathematical model incorporating two mass transfer processes (liquid film diffusion and apparent solid phase diffusion) to determine the effective external mass transfer coefficient (beta) and the apparent intraparticle soil diffusion coefficient (D(a)). A system of partial differential equations was solved numerically with a finite difference discretization of the computational domain allowing the rate limiting physical desorption process(es) for each element to be determined. The (thermodynamic) driving force of the leaching process is defined by the distribution coefficient (K(d0)) between soil and leachant. Although the K(d0) values investigated are very similar (ca. 6-15 L kg(-1)) for the elements studied with the exception of B (ca. 2.7 L kg(-1)), the leaching profiles are very different due to diffusion-limited processes. The elements may be classified as limited by beta (B, Sr, and Cd), by D(a) (Co, and Mn) or by beta and D(a) (Ni). This results in quantifiable parameters for the liability of elements in soil upon ingestion which may be implemented in future risk assessment protocols.
Assuntos
Ingestão de Alimentos/fisiologia , Elementos Químicos , Modelos Químicos , Poluentes do Solo/análise , Cádmio/isolamento & purificação , Difusão , Humanos , Manganês/isolamento & purificação , Níquel/isolamento & purificaçãoRESUMO
An electrothermal atomic absorption spectrometric procedure for the determination of nickel in active pharmaceutical ingredients was developed. Since the recoveries of nickel by the direct dissolution of samples in diluted nitric acid were low and caused errors in the determination of Ni in pharmaceutical samples, different approaches for sample pre-treatment were examined. It was found that the microwave digestion was the most suitable way for sample preparation. Various combinations of digestion agents and different microwave conditions were tested. The combination of nitric acid and hydrogen peroxide was found to be the most appropriate. The validity of the method was evaluated by recovery studies of spiked samples and by the comparison of the results obtained by inductively coupled plasma mass spectrometry (ICP-MS). The recovery ranged from 87.5 to 104.0% and a good agreement was achieved between both methods. The detection limit and the limit of quantification were 0.6 and 2.1 µg g-1 respectively. The precision of the method was confirmed by the determination of Ni in the spiked samples and was below 4%, expressed in terms of a relative standard deviation. The method was applied to the determination of nickel in production samples of active pharmaceutical ingredients and intermediates.
RESUMO
Experimental MS response factors were measured for 36 different saturated and unsaturated volatile organic compounds (VOC) containing carbon, hydrogen and halogen atoms. Chemical structure was encoded using various molecular descriptors. A quantitative structure-property relationship model was established using the multiple linear regression models. The cross-validation ability of the created model was estimated by leave-one-out cross-validation procedure. Error in the cross-validation of response factors was calculated by cross-validation procedure and was 15%, which is sufficient for the determination of VOCs in the air. The proposed procedure can be used for simultaneous qualitative and quantitative determination of volatile organic compounds in the atmosphere.
RESUMO
Determination of trace element concentrations in atmospheric aerosols is important because of their toxic effects on human health. Additionally, they are now widely used in source apportionment studies. There is a number of methods for sample preparation of ambient particulate matter. One of the most widely used is microwave-assisted digestion of filter-based samples. Since the water-soluble fraction is bioavaliable, the aim of our study was to determine the concentration of selected trace elements (V, Cr, Mn, Ni, Cu, Zn, As, Cd, Sb, Tl, and Pb) in this fraction and compare it to the amounts obtained by two different microwave digestion procedures - one using a mixture of H2O2 and HNO3 and the other using a mixture of HF, HCl, and HNO3. The recoveries of the digestion procedures used were tested on certified reference material (NIST SRM 1648 Urban Particulate Matter). The procedures were applied to filters containing PM10 particles collected at an urban background location in Ljubljana, Slovenia. Among the elements analysed, V, Zn, As, and Cd displayed the highest concentration within the water-soluble fraction, with Cr, Ni, Tl and Pb displaying the lowest concentrations. The comparison between the two applied digestion procedures showed that Cr, Ni, Sb and Tl were strongly bound to the sample matrix.
Assuntos
Aerossóis/química , Poluentes Atmosféricos/análise , Oligoelementos/análiseRESUMO
Medicinal plants accumulate heavy metals from contaminated soil, and their consumption can cause poisoning. Our objective was to determine the levels of Pb, Cd, Zn, Cu, Fe, and Mn in four medicinal plant species (Achillea millefolium, Hypericum perforatum, Plantago lanceolata, and Urtica dioica) and their native soil, all sampled at a former smelter. The highest soil Cd, Pb, and Zn levels surpassed the maximum allowed limit 75-fold, 48-fold, and 14-fold, respectively. Their soil levels correlated with those in the plants, but this was not the case with Cu, Fe, and Mn. Heavy metal accumulation seems to depend on the plant species, yet even so, medicinal herbs should be cultivated and gathered only from controlled (uncontaminated) areas. Polluted areas should be monitored on a regular basis, while further research should investigate the connection between the heavy metal levels in the soil, their levels available for plants, and the levels extractable from plants.
Assuntos
Achillea/química , Hypericum/química , Metais Pesados/análise , Plantago/química , Plantas Medicinais/química , Poluentes do Solo/análise , Urtica dioica/química , Monitoramento Ambiental , Poluição Ambiental , SérviaRESUMO
Certain types of samples contain chloride in concentrations that are too high to accurately determine other anions by ion chromatography without any pretreatment. One of the most widely used approaches for such samples is matrix elimination using disposable cartridges containing a cation-exchange resin in the Ag+ form. The efficiency and characteristics of the commercially available cartridge for Cl- removal were tested by the on-line connection of the cartridge effluent to an inductively coupled plasma mass spectrometer. Displacement efficiency of Ag+ ions and loading capacity of the cartridges were studied at different flow-rates. Significant amounts of silver were detected in the effluent, which were attributed to colloidal AgCl as well as dissolved Ag+ ions. Because silver ions can cause irreversible damage to the analytical column, an Ag cartridge followed by an on line filter (pore size 0.22 microm) and cartridge in the H3O+ form were proposed for improvement of this sample pretreatment technique for chloride removal.
Assuntos
Cloretos/química , Cromatografia por Troca Iônica/métodos , Resinas de Troca de Cátion , Cloretos/isolamento & purificação , Cromatografia por Troca Iônica/instrumentação , Hidrogênio , Prata , Compostos de Prata/química , Cloreto de Sódio/química , Espectrometria de Massas por Ionização por Electrospray/métodosRESUMO
A well-balanced incubation saline is necessary for permeability experiments with the rat jejunal tissue in the diffusion chambers. At the same time the investigated substance must be chemically stable and sufficiently soluble in this incubation saline. To investigate whether the absence of some ions in incubation salines influences the tissue viability and integrity or the diffusional characteristics of the epithelial membrane the electrical parameters were monitored and the permeability of fluorescein and acyclovir was evaluated during the experiments in side-by-side diffusion chambers. Our results show that the tissue integrity and viability are seriously impaired when Ca(2+) and Mg(2+)-free conditions are applied on both sides of the diffusion chambers, but not when only mucosal or only serosal side is Ca(2+) and Mg(2+)-free. Bicarbonate-free incubation salines can also alter the measured apparent permeability coefficients even though the tissue viability and integrity do not change. This change in the apparent permeability is most likely due to a change in the pH of the mucosal surface and can be prevented if the buffer capacity of the incubation saline is increased.
Assuntos
Absorção Intestinal , Mucosa Intestinal/metabolismo , Aciclovir/farmacocinética , Animais , Transporte Biológico , Soluções Tampão , Cálcio/metabolismo , Condutividade Elétrica , Fluoresceína/farmacocinética , Genfibrozila/farmacocinética , Técnicas In Vitro , Jejuno/metabolismo , Magnésio/metabolismo , Masculino , Permeabilidade , Ratos , Ratos Wistar , Cloreto de Sódio/metabolismo , Fatores de TempoRESUMO
Volatile organic compounds (VOCs) play an important role in different photochemical processes in the troposphere. In order to predict their impact on ozone formation processes a detailed knowledge about their abundance in the atmosphere as well as their reaction rate constants is required. The QSPR models were developed for the prediction of reaction rate constants of volatile unsaturated hydrocarbons. The chemical structure was encoded by constitutional and topological indices. Multiple linear regression models using CODESSA software was developed with the RMS(CV) error of 0.119 log units. The chemical structure was encoded by six topological indices. Additionally, a regression model using a variable connectivity index was developed. It provided worse cross-validation results with an RMS(CV) error of 0.16 log units, but enabled a structural interpretation of the obtained model. We differentiated between three classes of carbon atoms: sp2-hybridized, non-allylic sp3-hybridized and allylic sp3-hybridized. The structural interpretation of the developed model shows that most probably the most important mechanisms are the addition to multiple bonds and the hydrogen atom abstraction at allylic sites.
Assuntos
Radical Hidroxila/química , Modelos Químicos , Hidrocarbonetos Policíclicos Aromáticos/química , Ligação de Hidrogênio , Modelos Lineares , Valor Preditivo dos Testes , Relação Quantitativa Estrutura-Atividade , SoftwareRESUMO
New insights into the functioning, i.e. electrochemical behaviour and analytical performance, of in situ prepared antimony film electrodes (SbFEs) under square-wave anodic stripping (SW-ASV) and cyclic (CV) voltammetry conditions are presented by studying several key operational parameters using Pb(II), Cd(II) and Zn(II) as model analyte ions. Five different carbon- and metal-based substrate transducer electrodes revealed a clear advantage of the former ones while the concentration of the precursor Sb(III) ion exhibited a distinct influence on the ASV functioning of the SbFE. Among six acids examined as potential supporting electrolytes the HNO3 was demonstrated to yield nearly identical results in conducting ASV experiments with SbFE as so far almost exclusively used HCl. This is extremely important as HNO3 is commonly employed acidifying agent in trace metal analysis, especially in elemental mass spectrometry measurements. By carrying out a systematic CV and ASV investigation using a medium exchange protocol, we confirmed the formation of poorly soluble oxidized Sb species at the substrate electrode surface at the end of each stripping step, i.e. at the potentials beyond the anodic dissolution of the antimony film. Hence, the significance of the cleaning and initializing the surface of a substrate electrode after accomplishing a stripping step was thoroughly studied in order to find conditions for a complete removal of the adhered Sb-oxides and thus to assure a memory-free functioning of the in situ prepared SbFE. Finally, the practical analytical application of the proposed ASV method was successfully tested and evaluated by measuring the three metal analytes in ground (tap) and surface (river) water samples acidified with HNO3. Our results approved the appropriateness of the SbFE and the proposed method for measuring low µg L(-1) levels of some toxic metals, particularly taking into account the possibility of on-field testing and the use of low cost instrumentation.
RESUMO
A sensitive hydrophilic interaction liquid chromatography/electrospray ionization mass spectrometry (HILIC/ESI-MS/MS) method was developed for determination of selected aliphatic (i.e. malonic, succinic, glutaric, adipic, pimelic, suberic, azelaic, maleic, fumaric, glycolic and pyruvic acid), alicyclic (i.e. cis-pinonic and pinic acid) and aromatic (i.e. trimesic, phthalic acid and its isomers) carboxylic acids. Analytes were separated on an amide column using a gradient elution with a 10mM constant ionic strength mobile phase containing acetonitrile and aqueous ammonium acetate buffer (pH 5.0). The influence of the buffer type, pH, polar modifier and temperature on analyte retention under HILIC was studied. Static sonication-assisted solvent extraction was optimized for sample preparation prior to analysis. The recoveries obtained were higher than 90% for most analytes. The method was proven to be sensitive with limits of detection ranged from 0.03 to 16.0 µg/L in selected reaction monitoring mode (SRM). The repeatability and intermediate precision of the method, expressed as RSD (%) of the peak area ratio between analytes and their internal standards were generally lower than 5%. The method was successfully applied for determination of the studied acids in samples of ambient aerosol particles. A big advantage of the new method is also its ability to detect and separate the isobaric compounds of the selected carboxylic acids. Our results demonstrate that the method is specific and sensitive for the determination of a wider range of polar carboxylic acids at low concentrations in complex samples of aerosol particles.
Assuntos
Aerossóis/química , Ácidos Carboxílicos/análise , Cromatografia Líquida/métodos , Espectrometria de Massas em Tandem/métodos , Acetatos , Acetonitrilas , Ar/análise , Ácidos Carboxílicos/isolamento & purificação , Formiatos , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Concentração Osmolar , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , SolubilidadeRESUMO
Volatile organic compounds (VOCs) play an important role in the chemistry of the atmosphere and in biogeochemistry. They contribute to the oxidative capacity of the atmosphere, particle and air pollutants, as well as to the production of greenhouse gases (for instance ozone). Among analytical techniques for their determination in the atmosphere gas chromatography coupled with mass spectrometry (GC-MS) offers several advantages. However, for an accurate quantification calibration with standard substances is necessary. A quantitative structure-property relationship (QSPR) model for the prediction of MS response factors was developed on basis of our experimental measurements for the quantification of ozone precursors present in the atmosphere. A linear correlation between chemical structures and response factors was established by using a 7-parameter MLR model. The average error in the prediction of response factors was calculated by cross-validation procedure and was below 20%, which is sufficient for the determination of VOCs in the air. The proposed procedure is time consuming so it is more suited for the quantification of tentatively identified organic compounds during the reprocessing of MS chromatograms in cases when the original sample is no longer available.
Assuntos
Ar/análise , Cromatografia Gasosa/métodos , Compostos Orgânicos Voláteis/análise , Cromatografia Gasosa-Espectrometria de MassasRESUMO
The purpose of this work was the development of a method for the determination of Se compounds in leaves of plants. Water-soluble Se compounds were extracted from samples by water. Enzymatic hydrolysis with the non-specific enzyme protease XIV was used for the release of Se compounds bound to proteins. Separation of Se species was made by ion exchange chromatography, using an anion exchange column for Se(IV), Se(VI) and selenomethionine (SeMet), and a cation exchange column for selenomethylselenocysteine (SeMeSeCys) and selenocystine (SeCys(2)). Columns were connected "on line" to a hydride generation atomic fluorescence spectrometer (HG-AFS) using a UV lamp between the separation and detection system. The repeatability of the results obtained by the developed method was under 15% (R.S.D.) for all Se species; the detection limit was 2-10 ng Se/g of supernatant. The accuracy was checked by comparison with some literature data for reference materials since there were no suitable certified reference materials available. The method was used for the determination of Se compounds in chicory (Cichorium intybus L.) leaves from plants which were cultivated aeroponically with elevated concentrations of Na(2)SeO(4) for different periods. Se accumulated efficiently in chicory leaves; up to 480 microg/g after 41 days of exposure, mostly (64%) as Se(VI), i.e. in the form of Se added. Beside inorganic Se, in the extracts from enzyme hydrolysis we also found SeMet (4.2-8.4%) and SeMeSeCys (
RESUMO
A quadrupole inductively coupled plasma mass spectrometer was evaluated for use in the detection of phosphorus. The influences of nitric acid and methanol (simulating the composition of a sample solution after nitric acid digestion) on phosphorus determination were studied using two different measuring methods at different plasma conditions: detection of phosphorus ions at m/z 31 and detection of phosphorus oxide ions at m/z 47. The existence of polyatomic interferences at m/z 31 and 47 was explored. Nitric acid and methanol are shown to be the sources of polyatomic ions and therefore cause poorer detection limits. Better detection limits were achieved in such matrices when phosphorus was detected as 31P+. The presence of methanol improves the system sensitivity towards phosphorus sevenfold; however, this positive effect is hindered by the high background signal due to carbon-based polyatomic ions. For samples with an organic matrix an appropriate mineralization procedure should be applied (high excess of nitric acid and high temperature) to quantitatively oxidize organic compounds to carbon dioxide, which is easily removed from the sample, in order to achieve correct results.
Assuntos
Espectrometria de Massas/métodos , Microquímica/métodos , Fósforo/análise , Dióxido de Carbono/química , Cátions , Metanol/química , Microquímica/instrumentação , Minerais/química , Ácido Nítrico/química , Compostos Orgânicos/química , Compostos Organofosforados/análise , Oxirredução , Fosfatos/análise , Fosfatos/química , Fósforo/química , Compostos de Fósforo/análise , Compostos de Fósforo/química , Sensibilidade e Especificidade , TemperaturaRESUMO
A new method is described for the determination of endogenous jasmonic acid (JA) in Lemna minor plant extracts using liquid chromatography (LC) with fluorescence detection. Plant tissues were extracted and derivatised using 9-anthryldiazomethane (ADAM reagent) prepared in situ. Accuracy and precision were improved by using the internal standard dihydrojasmonic acid (dh-JA) for the correction of JA losses during sample preparation steps. Liquid chromatography-mass spectrometry (LC/MS) analysis of ADAM derivatives of JA and dh-JA confirmed that a single molecule of JA and dh-JA was coupled with one molecule of reagent. Derivatives of JA and dh-JA were separated with gradient elution on a C18 reversed-phase column using acetonitrile/water as a mobile phase and detected by a fluorescence detector at excitation and emission wavelengths of 254 and 412 nm, respectively. The detection limits of JA and dh-JA were 2.9 ng mL(-1) and 3.7 ng mL(-1) per 50-microL injection. The method is reproducible and selective and yields single peaks for each compound regardless of isomer. The specificity and accuracy of the proposed LC/FD method was confirmed by liquid chromatography-TurboIon Spray tandem mass spectrometric (LC/MS/MS) analysis of free JA in Lemna minor samples under multiple reaction monitoring conditions.
Assuntos
Cromatografia Líquida/métodos , Ciclopentanos/análise , Magnoliopsida/química , Extratos Vegetais/análise , Espectrometria de Fluorescência/métodos , Espectrometria de Massas por Ionização por Electrospray/métodos , OxilipinasRESUMO
Chromium, cadmium and lead were determined in different fractions of the winemaking process such as in grape, pressed pomace, must deposit, deposit of lees, must and wine. Grape, pressed pomace, must deposit and deposit of lees were digested by a high-pressure microwave-assisted digestion system with a mixture of nitric acid and hydrogen peroxide, while for must and wine no special treatment was required. The temperature programs of the graphite furnace were optimised and different matrix modifiers were applied: Mg(NO3)2, NaVO3 for Cr and NH4H2PO4, Pd(NO3)2 for Pb and Cd determinations. Mg(NO3)2 and NaVO3 thermally stabilized Cr and enabled the increase of pyrolysis temperatures up to 1500 degrees C. NH4H2PO4 and Pd(NO3)2 are suitable modifiers for Pb and allowed pyrolysis temperatures up to 800 degrees C in grape, pressed pomace and wine samples, 1100 degrees C in must samples and 1200 degrees C in deposit of lees. The non-specific background absorption of NH4H2PO4 was 1.5-2 orders of magnitude higher than that of the Pd(NO3)2.