Stabilization of the Trigonal Langasite Structure in Ca3Ga2-2xZnxGe4+xO14 (0 ≤ x ≤ 1) with Partial Ordering of Three Isoelectronic Cations Characterized by a Multitechnique Approach.

Crystallization of oxide glasses rich in Zn2+, Ga3+, and Ge4+ is of interest for the synthesis of new transparent ceramics. In this context, we report the identification and detailed structural characterization of a new solid solution Ca3Ga2-2xZnxGe4+xO14 (0 ≤ x ≤ 1). These compounds adopt the trigonal langasite structure type, offering three possible crystallographic sites for the coordination of isoelectronic Zn2+, Ga3+, and Ge4+. We used neutron diffraction to determine distributions of Ga3+/Ge4+ and Zn2+/Ge4+ in the simpler end members Ca3Ga2Ge4O14 and Ca3ZnGe5O14, while for the complex intermediate member Ca3GaZn0.5Ge4.5O14, we used an original approach combining quantitative 2D analysis of atomic-resolution STEM-EDS maps with neutron diffraction. This revealed that, across the solid solution, the tetrahedral D sites remain fully occupied by Ge4+, while Zn2+, Ga3+, and the remaining Ge4+ are shared between octahedral B- and tetrahedral C sites in proportions that depend upon their relative ionic radii. The adoption of the trigonal langasite structure by glass-crystallized Ca3ZnGe5O14, a compound that was previously observed only in a distorted monoclinic langasite polymorph, is attributed to substantial disorder between Zn2+ and Ge4+ over the B and C sites. The quantitative 2D refinement of atomic-resolution STEM-EDS maps is applicable to a wide range of materials where multiple cations with poor scattering contrast are distributed over different crystallographic sites in a crystal structure.

X-ray Diffraction, NMR Studies, and DFT Calculations of the Room and High Temperature Structures of Rubidium Cryolite, Rb3AlF6.

A crystallographic approach incorporating multinuclear high field solid state NMR (SSNMR), X-ray structure determinations, TEM observation, and density functional theory (DFT) was used to characterize two polymorphs of rubidium cryolite, Rb3AlF6. The room temperature phase was found to be ordered and crystallizes in the Fddd (no. 70) space group with a = 37.26491(1) Å, b = 12.45405(4) Å, and c = 17.68341(6) Å. Comparison of NMR measurements and computational results revealed the dynamic rotations of the AlF6 octahedra. Using in situ variable temperature MAS NMR measurements, the chemical exchange between rubidium sites was observed. The ß-phase, i.e., high temperature polymorph, adopts the ideal cubic double-perovskite structure, space group Fm3m, with a = 8.9930(2) Å at 600 °C. Additionally, a series of polymorphs of K3AlF6 has been further characterized by high field high temperature SSNMR and DFT computation.

Oxo- and Oxofluoroaluminates in the RbF-Al2O3 System: Synthesis and Structural Characterization.

Precise research on the RbF-Al2O3 system was carried out by means of combining X-ray powder diffraction, high-field solid-state NMR spectroscopy, and thermal analysis methods. α-Rb3AlF6, RbAlO2, Rb2Al22O34, and new phase, Rb2Al2O3F2, were identified in the system. The structure of this new rubidium oxofluoroaluminate was determined. It is built up from single layers of oxygen-connected AlO3F tetrahedra, those layers beeing separated by fluorine atoms. This type of structure exhibits a decent ionic conductivity at ambient temperature, 1.74 × 10-6 S cm-1. The similar structural arrangement of O3Al-O-AlO3 and FO2Al-O-AlO2F tetrahedra of the conduction planes in Rb2Al22O34 and Rb2Al2O3F2 were confirmed by 27Al NMR measurements. A thermal analysis of the RbF-Al2O3 system revealed that it can be defined as a pseudobinary subsystem of the more general quaternary RbF-AlF3-Al2O3-Rb2O phase diagram. From a phase analysis of individual phase fields, the mutual metastable behavior of all founded phases can be considered. It was observed that fluoro- and oxoaluminates exist together. Rb2Al2O3F2 is more stable under high temperature. Rubidium fluoro- and oxoaluminates are metastable precursors of the thermodynamically more stable structure of rubidium oxofluoroaluminate.

Structure and Dynamics of Nonionic Surfactant Aggregates in Layered Materials.

The aggregation of surfactants on solid surfaces as they are adsorbed from solution is the basis of numerous technological applications such as colloidal stabilization, ore flotation, and floor cleaning. The understanding of both the structure and the dynamics of surfactant aggregates applies to the development of alternative ways of preparing hybrid layered materials. For this purpose, we study the adsorption of the triethylene glycol mono n-decyl ether (C10E3) nonionic surfactant onto a synthetic montmorillonite (Mt), an aluminosilicate clay mineral for organoclay preparation with important applications in materials sciences, catalysis, wastewater treatment, or as drug delivery. The aggregation mechanisms follow those observed in an analogous natural Mt, with the condensation of C10E3 in a bilayer arrangement once the surfactant self-assembles in a lamellar phase beyond the critical micelle concentration, underlining the importance of the surfactant state in solution. Solid-state 1H nuclear magnetic resonance (NMR) at fast magic-angle spinning (MAS) and high magnetic field combined with1H-13C correlation experiments and different types of 13C NMR experiments selectively probes mobile or rigid moieties of C10E3 in three different aggregate organizations: (i) a lateral monolayer, (ii) a lateral bilayer, and (iii) a normal bilayer. High-resolution 1H{27Al} CP-1H-1H spin diffusion experiments shed light on the proximities and dynamics of the different fragments and fractions of the intercalated surfactant molecules with respect to the Mt surface. 23Na and 1H NMR measurements combined with complementary NMR data, at both molecular and nanometer scales, precisely pointed out the location of the C10E3 ethylene oxide hydrophilic group in close contact with the Mt surface interacting through ion-dipole or van der Waals interactions.

Local Disorder and Tunable Luminescence in Sr1-x/2Al2-xSixO4 (0.2 ≤ x ≤ 0.5) Transparent Ceramics.

Eu-doped Sr1-x/2Al2-xSixO4 (x = 0.2, 0.4, and 0.5) transparent ceramics have been synthesized by full and congruent crystallization from glasses prepared by aerodynamic levitation and laser-heating method. Structural refinements from synchrotron and neutron powder diffraction data show that the ceramics adopt a 1 × 1 × 2 superstructure compared to the SrAl2O4 hexagonal polymorph. While the observed superstructure reflections indicate a long-range ordering of the Sr vacancies in the structure, 29Si and 27Al solid-state NMR measurements associated with DFT computations reveal a significant degree of disorder in the fully polymerized tetrahedral network. This is evidenced through the presence of Si-O-Si bonds, as well as Si(OAl)4 units at remote distances of the Sr vacancies and Al(OAl)4 units in the close vicinity of Sr vacancies departing from local charge compensation in the network. The transparent ceramics can be doped by europium to induce light emission arising from the volume under UV excitation. Luminescence measurements then reveal the coexistence of Eu2+ and Eu3+ in the samples, thereby allowing tuning the emission color depending on the excitation wavelength and suggesting possible applications such as solid state lighting.

Nonstoichiometric control of tunnel-filling order, thermal expansion, and dielectric relaxation in tetragonal tungsten Bronzes Ba0.5-xTaO3-x.

Ordering of interpolated Ba(2+) chains and alternate Ta-O rows (TaO)(3+) in the pentagonal tunnels of tetragonal tungsten bronzes (TTB) is controlled by the nonstoichiometry in the highly nonstoichiometric Ba0.5-xTaO3-x system. In Ba0.22TaO2.72, the filling of Ba(2+) and (TaO)(3+) groups is partially ordered along the ab-plane of the simple TTB structure, resulting in a √2-type TTB superstructure (Pbmm), while in Ba0.175TaO2.675, the pentagonal tunnel filling is completely ordered along the b-axis of the simple TTB structure, leading to a triple TTB superstructure (P21212). Both superstructures show completely empty square tunnels favoring Ba(2+) conduction and feature unusual accommodation of Ta(5+) cations in the small triangular tunnels. In contrast with stoichiometric Ba6GaTa9O30, which shows linear thermal expansion of the cell parameters and monotonic decrease of permittivity with temperature within 100-800 K, these TTB superstructures and slightly nonstoichiometric simple TTB Ba0.4TaO2.9 display abnormally broad and frequency-dependent extrinsic dielectric relaxations in 10(3)-10(5) Hz above room temperature, a linear deviation of the c-axis thermal expansion around 600 K, and high dielectric permittivity ∼60-95 at 1 MHz at room temperature.

Original Synthetic Route To Obtain a SrAl2O4 Phosphor by the Molten Salt Method: Insights into the Reaction Mechanism and Enhancement of the Persistent Luminescence.

SrAl2O4:Eu(2+), Dy(3+) has been extensively studied for industrial applications in the luminescent materials field, because of its excellent persistent luminescence properties and chemical stability. Traditionally, this strontium aluminate material is synthesized in bulk form and/or fine powder by the classic solid-state method. Here, we report an original synthetic route, a molten salt assisted process, to obtain highly crystalline SrAl2O4 powder with nanometer-scale crystals. The main advantages of salt addition are the increase of the reaction rate and the significant reduction of the synthesis temperature because of much higher mobility of reactants in the liquid medium than in the solid-state method. In particular, the formation mechanism of SrAl2O4, the role of the salt, and the phase's evolution have been explored as a function of temperature and time. Phosphorescent powders based on SrAl2O4:Eu(2+), Dy(3+) with high crystallinity are obtained after 1 h treatment at 900 °C. This work could promote further interest in adopting the molten salt strategy to process high-crystallinity materials with enhanced luminescence to design technologically relevant phosphors.

Topological, geometric, and chemical order in materials: insights from solid-state NMR.

Unlike the long-range order of ideal crystalline structures, local order is an intrinsic characteristic of real materials and often serves as the key to the tuning of their properties and their final applications. Although researchers can easily assess local ordering using two-dimensional imaging techniques with resolution that approaches the atomic level, the diagnosis, description, and qualification of local order in three dimensions is much more challenging. Solid-state nuclear magnetic resonance (NMR) and its panel of continually developing instruments and methods enable the local, atom-selective characterization of structures and assemblies ranging from the atomic to the nanometer length scales. By making use of the indirect J-coupling that distinguishes chemical bonds, researchers can use solid-state NMR to characterize a variety of materials, ranging from crystalline compounds to amorphous or glassy materials. In crystalline compounds showing some disorder, we describe and distinguish the contributions of topology, geometry, and local chemistry in ways that are consistent with X-ray diffraction and computational approaches. We give examples of materials featuring either chemical disorder in a topological order or topological disorder with local chemical order. For glasses, we show that we can separate geometric and chemical contributions to the local order by identifying structural motifs with a viewpoint that extends from the atomic scale up to the nanoscale. As identified by solid state NMR, the local structure of amorphous materials or glasses consists of well-identified structural entities up to at least the nanometer scale. Instead of speaking of disorder, we propose a new description for these structures as a continuous assembly of locally defined structures, an idea that draws on the concept of locally favored structures (LFS) introduced by Tanaka and coworkers. This idea provides a comprehensive picture of amorphous structures based on fluctuations of chemical composition and structure over different length scales. We hope that these local or molecular insights will allow researchers to consider key questions related to nucleation and crystallization, as well as chemically (spinodal decomposition) or density-driven (polyamorphism) phase separation, which could lead to future applications in a variety of materials.

Localization of oxygen interstitials in CeSrGa3O(7+δ) melilite.

The solubility of Ce in the La(1-x)Ce(x)SrGa3O(7+δ) and La(1.54-x)Ce(x)Sr0.46Ga3O(7.27+δ) melilites was investigated, along with the thermal redox stability in air of these melilites and the conductivity variation associated with oxidization of Ce(3+) into Ce(4+). Under CO reducing atmosphere, the La in LaSrGa3O7 may be completely substituted by Ce to form the La(1-x)Ce(x)SrGa3O(7+δ) solid solution, which is stable in air to ∼600 °C when x ≥ 0.6. On the other side, the La(1.54-x)Ce(x)Sr0.46Ga3O(7.27+δ) compositions displayed much lower Ce solubility (x ≤ 0.1), irrespective of the synthesis atmosphere. In the as-made La(1-x)CexSrGa3O(7+δ), the conductivity increased with the cerium content, due to the enhanced electronic conduction arising from the 4f electrons in Ce(3+) cations. At 600 °C, CeSrGa3O(7+δ) showed a conductivity of ∼10(-4) S/cm in air, nearly 4 orders of magnitude higher than that of LaSrGa3O7. The oxidation of Ce(3+) into Ce(4+) in CeSrGa3O(7+δ) slightly reduced the conductivity, and the oxygen excess did not result in apparent increase of oxide ion conduction in CeSrGa3O(7+δ). The Ce doping in air also reduced the interstitial oxide ion conductivity of La1.54Sr0.46Ga3O7.27. Neutron powder diffraction study on CeSrGa3O7.39 composition revealed that the extra oxygen is incorporated in the four-linked GaO4 polyhedral environment, leading to distorted GaO5 trigonal bipyramid. The stabilization and low mobility of interstitial oxygen atoms in CeSrGa3O(7+δ), in contrast with those in La(1+x)Sr(1-x)Ga3O(7+0.5x), may be correlated with the cationic size contraction from the oxidation of Ce(3+) to Ce(4+). These results provide a new comprehensive understanding of the accommodation and conduction mechanism of the oxygen interstitials in the melilite structure.

Synthesis and structure determination of CaSi(1/3)B(2/3)O(8/3): a new calcium borosilicate.

This article reports on the identification, synthesis, and in-situ structure determination of a new crystalline calcium borosilicate compound of composition CaSi(1/3)B(2/3)O(8/3). Synthesis was carried out by complete crystallization on annealing from a corresponding glassy composition in the widely studied CaO-SiO2-B2O3 ternary system. The crystallographic structure was determined ab initio using electron diffraction information and the charge flipping algorithm performed on synchrotron and neutron powder diffraction data collected in situ at high temperature. CaSi(1/3)B(2/3)O(8/3) is found to crystallize in the Pna2(1) (no. 33) orthorhombic space group, with a = 12.1025(4) Å, b = 5.2676(1) Å, c = 3.7132(1) Å, and V = 236.71(1) Å(3) at 650 °C. Solid-state (29)Si and (11)B NMR experiments have confirmed the existence of finite chains along the c axis, formed by corner-sharing SiO4 tetrahedra and BO3 units. Silicon and boron species share a crystallographic site, and the Si/B distribution induces different possible arrangements of the chains which are discussed in light of DFT calculations. At room temperature, the existence of a superstructure, resulting from the ordering within nanoscale domains, was explored by transmission electron microscopy.

A computationally-guided non-equilibrium synthesis approach to materials discovery in the SrO-Al2O3-SiO2 phase field.

Glass-crystallisation synthesis is coupled to probe structure prediction for the guided discovery of new metastable oxides in the SrO-Al2O3-SiO2 phase field, yielding a new ternary ribbon-silicate, Sr2Si3O8. In principle, this methodology can be applied to a wide range of oxide chemistries by selecting an appropriate non-equilibrium synthesis route.

Synthesis and structure resolution of RbLaF4.

The synthesis and structure resolution of RbLaF(4) are described. RbLaF(4) is synthesized by solid-state reaction between RbF and LaF(3) at 425 °C under a nonoxidizing atmosphere. Its crystal structure has been resolved by combining neutron and synchrotron powder diffraction data refinements (Pnma,a = 6.46281(2) Å, b = 3.86498(1) Å, c = 16.17629(4) Å, Z = 4). One-dimensional (87)Rb, (139)La, and (19)F MAS NMR spectra have been recorded and are in agreement with the proposed structural model. Assignment of the (19)F resonances is performed on the basis of both (19)F-(139)La J-coupling multiplet patterns observed in a heteronuclear DQ-filtered J-resolved spectrum and (19)F-(87)Rb HMQC MAS experiments. DFT calculations of both the (19)F isotropic chemical shieldings and the (87)Rb, (139)La electric field gradient tensors using the GIPAW and PAW methods implemented in the CASTEP code are in good agreement with the experimental values and support the proposed structural model. Finally, the conductivity of RbLaF(4) and luminescence properties of Eu-doped LaRbF(4) are investigated.

Effects of the orientation of the 23Na-29Si dipolar vector on the dipolar mediated heteronuclear solid state NMR correlation spectrum of crystalline sodium silicates.

Dipolar-Heteronuclear Multiple Quantum Correlation (D-HMQC) experiment based on SR4(2)(1) recoupling was shown as a very efficient probe of spatial proximities in ordered or disordered materials. As crystalline sodium silicates have been extensively studied using 1D and 2D MAS NMR experiments and DFT calculations, they have been used as candidate model systems to perform this D-HMQC experiment. In this work, we demonstrate that the combination of (29)Si and (23)Na NMR at high magnetic field and DFT calculations makes it possible to revisit the assignment of the NMR signature of the δ-Na(2)Si(2)O(5) polymorph. A D-HMQC experiment performed on this crystalline sample reveals lineshape distortions on the (23)Na powder patterns extracted from the 2D correlation. Numerical simulations showed that these distortions result from an effect of the relative orientation between the (23)Na quadrupolar tensor and the (23)Na-(29)Si dipolar vector at the origin of the magnetization transfer.

High temperature NMR study of aluminum metal influence on speciation in molten NaF-AlF3 fluorides.

In situ high temperature NMR spectroscopy has been used to characterize the interactions between aluminum metal and cryolitic melts. (27)Al, (23)Na, and (19)F NMR spectra have been acquired in NaF-AlF(3) and NaF-AlF(3)-Al melts over a wide range of compositions. The evolution of the signals evidence a chemical reaction between the metal and the salt. The different samples have been also described after solidification at room temperature by Environmental Scanning Electronic Microscopy, high resolution solid state NMR, and X-ray diffraction. The combination of in situ high temperature NMR characterization of the melts, with experimental description of solidified samples after cooling, evidence an enrichment of the melts with AlF(3) and different reactions with metallic aluminum depending on the initial bath composition.

ZSM-5 Zeolite: Complete Al Bond Connectivity and Implications on Structure Formation from Solid-State NMR and Quantum Chemistry Calculations.

Al site distribution in the structurally complex and industrially important ZSM-5 zeolite is determined by studying the spectroscopic response of Al(OSi)4 units and using a self-consistent combination of up-to-date solid-state NMR correlations (29Si-27Al and 1H-27Al D-HMQC) and quantum chemistry methods (DFT-D). To unravel the driving forces behind specific Al sitting positions, our approach focuses on ZSM-5 containing its more efficient OSDA, tetrapropylammonium.

Pressureless glass crystallization of transparent yttrium aluminum garnet-based nanoceramics.

Transparent crystalline yttrium aluminum garnet (YAG; Y3Al5O12) is a dominant host material used in phosphors, scintillators, and solid state lasers. However, YAG single crystals and transparent ceramics face several technological limitations including complex, time-consuming, and costly synthetic approaches. Here we report facile elaboration of transparent YAG-based ceramics by pressureless nano-crystallization of Y2O3-Al2O3 bulk glasses. The resulting ceramics present a nanostructuration composed of YAG nanocrystals (77 wt%) separated by small Al2O3 crystalline domains (23 wt%). The hardness of these YAG-Al2O3 nanoceramics is 10% higher than that of YAG single crystals. When doped by Ce3+, the YAG-Al2O3 ceramics show a 87.5% quantum efficiency. The combination of these mechanical and optical properties, coupled with their simple, economical, and innovative preparation method, could drive the development of technologically relevant materials with potential applications in wide optical fields such as scintillators, lenses, gem stones, and phosphor converters in high-power white-light LED and laser diode.

New routes to mesoporous silica-based spheres with functionalized surfaces.

Mesoporous hybrid silica-based spheres with functionalized surfaces and abundant highly ordered domains are obtained using for the first time a simple synthetic route based on spray-drying processes.

Relationships between carbonation rate of carbapatite and morphologic characteristics of calcium phosphate stones and etiology.

OBJECTIVES: To examine the significance of the carbonation rate (CR) in carbonated apatite (carbapatite [CA]) stones and its relationships with the morphologic characteristics of CA and etiology. CA stones without struvite can result from metabolic disorders or urinary tract infection, but the latter etiology is still debated. Infection stones caused by urea-splitting bacteria are made of CA admixed with struvite and exhibit a high CO(3)(2-)/PO(4)(3-) ratio (CR). However, little is known as to the significance of the CR of CA in the absence of struvite in idiopathic calcium phosphate stones. METHODS: We studied 39 urinary calculi mainly composed of CA without struvite. Of the 39 patients, 13 had a past or present history of urinary tract infection, 24 had hypercalciuria, and 2 had medullary sponge kidney. The stones were examined by Fourier transform infrared spectroscopy and scanning electron microscopy. The presence of amorphous carbonated calcium phosphate or whitlockite was also considered. RESULTS: The CR of CA was 14% +/- 9%. On scanning electron microscopy, the CA particles appeared as spherules of 4.5 +/- 3.0 mum in diameter and were significantly larger in females than in males. In 16 cases, scanning electron microscopy showed bacterial imprints. In these calculi, the CR was significantly greater (22% +/- 7%) than in those without a visible bacterial imprint (8% +/- 5%, P < .0001). Amorphous carbonated calcium phosphate was found in 15 of 16 stones (93.8%) with imprints and in none of the 23 stones without imprints (P < .0001). CONCLUSIONS: A close relationship was observed between the presence of bacterial imprints, indicative of past or current urinary tract infection, and both the presence of amorphous carbonated calcium phosphate (or whitlockite) and a high CR of CA.