A Multifunctional Polyethylene Glycol/Triethoxysilane-Modified Polyurethane Foam Dressing with High Absorbency and Antiadhesion Properties Promotes Diabetic Wound Healing.

The delayed healing of chronic wounds, such as diabetic foot ulcers (DFUs), is a clinical problem. Few dressings can promote wound healing by satisfying the demands of chronic wound exudate management and tissue granulation. Therefore, the aim of this study was to prepare a high-absorption polyurethane (PU) foam dressing modified by polyethylene glycol (PEG) and triethoxysilane (APTES) to promote wound healing. PEG-modified (PUE) and PEG/APTES-modified (PUESi) dressings were prepared by self-foaming reactions. Gauze and PolyMem were used as controls. Next, Fourier transform-infrared spectroscopy, thermomechanical analyses, scanning electron microscopy and tensile strength, water absorption, anti-protein absorption, surface dryness and biocompatibility tests were performed for in vitro characterization. Wound healing effects were further investigated in nondiabetic (non-DM) and diabetes mellitus (DM) rat models. The PUE and PUESi groups exhibited better physicochemical properties than the gauze and PolyMem groups. Moreover, PUESi dressing showed better anti-adhesion properties and absorption capacity with deformation. Furthermore, the PUESi dressing shortened the inflammatory phase and enhanced collagen deposition in both the non-DM and DM animal models. To conclude, the PUESi dressing not only was fabricated with a simple and effective strategy but also enhanced wound healing via micronegative-pressure generation by its high absorption compacity with deformation.

Bone-Targeting Nanoparticles of a Dendritic (Aspartic acid)3-Functionalized PEG-PLGA Biopolymer Encapsulating Simvastatin for the Treatment of Osteoporosis in Rat Models.

Simvastatin (SIM) is a lipid-lowering drug that also promotes bone formation, but its high liver specificity may cause muscle damage, and the low solubility of lipophilic drugs limits the systemic administration of SIM, especially in osteoporosis (OP) studies. In this study, we utilized the bone-targeting moiety of dendritic oligopeptides consisting of three aspartic acid moieties (dAsp3) and amphiphilic polymers (poly(ethylene glycol)-block-poly(lactic-co-glycolic acid); PEG-PLGA) to create dAsp3-PEG-PLGA (APP) nanoparticles (NPs), which can carry SIM to treat OP. An in vivo imaging system showed that gold nanocluster (GNC)-PLGA/APP NPs had a significantly higher accumulation rate in representative bone tissues. In vivo experiments comparing low-dose SIM treatment (0.25 mg/kg per time, 2 times per week) showed that bone-targeting SIM/APP NPs could increase the bone formation effect compared with non-bone-targeting SIM/PP NPs in a local bone loss of hindlimb suspension (disuse) model, but did not demonstrate good bone formation in a postmenopausal (ovariectomized) model of systemic bone loss. The APP NPs could effectively target high mineral levels in bone tissue and were expected to reduce side effects in other organs affected by SIM. However, in vivo OP model testing showed that the same lower dose could not be used to treat different types of OP.

Humanized bispecific antibody (mPEG × HER2) rapidly confers PEGylated nanoparticles tumor specificity for multimodality imaging in breast cancer.

BACKGROUND: Developing a universal strategy to improve the specificity and sensitivity of PEGylated nanoaparticles (PEG-NPs) for assisting in the diagnosis of tumors is important in multimodality imaging. Here, we developed the anti-methoxypolyethylene glycol (mPEG) bispecific antibody (BsAb; mPEG × HER2), which has dual specificity for mPEG and human epidermal growth factor receptor 2 (HER2), with a diverse array of PEG-NPs to confer nanoparticles with HER2 specificity and stronger intensity. RESULT: We used a one-step formulation to rapidly modify the nanoprobes with mPEG × HER2 and optimized the modified ratio of BsAbs on several PEG-NPs (Lipo-DiR, SPIO, Qdot and AuNP). The αHER2/PEG-NPs could specifically target MCF7/HER2 cells (HER2++) but not MCF7/neo1 cells (HER2+/-). The αHER2/Lipo-DiR and αHER2/SPIO could enhance the sensitivity of untargeted PEG-NPs on MCF7/HER2 (HER2++). In in vivo imaging, αHER2/Lipo-DiR and αHER2/SPIO increased the specific targeting and enhanced PEG-NPs accumulation at 175% and 187% on 24 h, respectively, in HER2-overexpressing tumors. CONCLUSION: mPEG × HER2, therefore, provided a simple one-step formulation to confer HER2-specific targeting and enhanced sensitivity and contrast intensity on HER2 positive tumors for multimodality imaging.

Combination of a Bioceramic Scaffold and Simvastatin Nanoparticles as a Synthetic Alternative to Autologous Bone Grafting.

The fragile nature of porous bioceramic substitutes cannot match the toughness of bone, which limits the use of these materials in clinical load-bearing applications. Statins can enhance bone healing, but it could show rhabdomyolysis/inflammatory response after overdosing. In this study, the drug-containing bone grafts were developed from poly(lactic acid-co-glycolic acid)-polyethylene glycol (PLGA-PEG) nanoparticles encapsulating simvastatin (SIM) (SIM-PP NPs) loaded within an appropriately mechanical bioceramic scaffold (BC). The combination bone graft provides dual functions of osteoconduction and osteoinduction. The mechanical properties of the bioceramic are enhanced mainly based on the admixture of a combustible reverse-negative thermoresponsive hydrogel (poly(N-isopropylacrylamide base). We showed that SIM-PP NPs can increase the activity of alkaline phosphatase and osteogenic differentiation of bone marrow stem cells. To verify the bone-healing efficacy of this drug-containing bone grafts, a nonunion radial endochondral ossification bone defect rabbit model (N = 3/group) and a nonunion calvarial intramembranous defect Sprague Dawley (SD) rat model (N = 5/group) were used. The results indicated that SIM-PP NPs combined with BC can improve the healing of nonunion bone defects of the radial bone and calvarial bone. Therefore, the BC containing SIM-PP NPs may be appropriate for clinical use as a synthetic alternative to autologous bone grafting that can overcome the problem of determining the clinical dosage of simvastatin drugs to promote bone healing.

Evaluation of antibiofilm activity of metal oxides nanoparticles and carbon nanotubes coated styrofoam on the bacterium Jeotgalicoccus huakuii.

The co-existence of metal oxide nanoparticles (MONPs), carbon-based nanomaterials and microplastics (MPs) in the natural environment are expected to be of growing global concern due to their increasing abundance and persistence in the environment worldwide. Knowledge of the interaction of the above compounds particularly under light irradiation in water remains limited. In the present study, the possible individual and combined toxic effects of MONPs, carbon nanotubes (CNTs) through styrofoam (SF) on the environmental bacterium Jeotaglicoccus huakuii were systematically investigated. The fabricated MONPs and CNTs were characterized using the following techniques: FT-IR (functional groups), XRD (crystallinity), SEM, and EDX (topological morphology). The objective of this study was to investigate and identify naturally occurring bacteria capable of mitigating and detoxifying toxic pollutants under adverse conditions. Moreover, the assessment of minimum inhibitory concentration (MIC) was made through an agar well plate method, resazurin (ELISA measurement), growth kinetics and bacterial viability were assessed employing live and dead assay and biofilm combating ability was analyzed using an antibiofilm assay. Further, the biotransformation of f-MWCNTs by J. huakuii was evaluated employing RT-PCR and SEM analysis. The results demonstrated that the toxicity of Pb3O4@f-MWCNTs was comparatively higher than the remaining Pb3O4 NPs and SF coated NPs.. Interestingly, J. huakuii showed resistance against f-MWCNTs at very high concentrations and able to utilize f-MWCNTs as a sole carbon source suggesting J. huakuii as a suitable aquatic bioremediation tool for both MONPs and CNTs transfer via MPs. The results also enhanced our understanding of the affinity of MPs towards MONPs and CNTs under extreme environmental conditions.

Adipose-derived stem cells loaded photocurable and bioprintable bioinks composed of GelMA, HAMA and PEGDA crosslinker to differentiate into smooth muscle phenotype.

Developing a polymer-based photocrosslinked 3D printable scaffolds comprised of gelatin methacryloyl (G) and hyaluronic acid methacryloyl (H) incorporated with two molecular weights of polyethylene glycol diacrylate (P) of various concentrations that enables rabbit adipose-derived stem cells (rADSCs) to survive, grow, and differentiate into smooth muscle cells (SMCs). Then, the chemical modification and physicochemical properties of the PGH bioinks were evaluated. The cell viability was assessed via MTT, CCK-8 assay and visualized employing Live/Dead assay. In addition, the morphology and nucleus count of differentiated SMCs were investigated by adopting TRAP (tartrate-resistant acid phosphatase) staining, and quantitative RT-PCR analysis was applied to detect gene expression using two different SMC-specific gene markers α-SMA and SM-MHC. The SMC-specific protein markers namely α-SMA and SM-MHC were applied to investigate SMC differentiation ability by implementing Immunocytofluorescence staining (ICC) and western blotting. Moreover, the disk, square, and tubular cellular models of PGH7 (GelMA/HAMA=2/1) + PEGDA-8000 Da, 3% w/v) hybrid bioink were printed using an extrusion bioprinting and cell viability of rADSCs was also analysed within 3D printed square construct practising Live/Dead assay. The results elicited the overall viability of SMCs, conserving its phenotype in biocompatible PGH7 hybrid bioink revealing its great potential to regenerate SMCs associated organs repair.

Bilayer osteochondral graft in rabbit xenogeneic transplantation model comprising sintered 3D-printed bioceramic and human adipose-derived stem cells laden biohydrogel.

Reconstruction of severe osteochondral defects in articular cartilage and subchondral trabecular bone remains a challenging problem. The well-integrated bilayer osteochondral graft design expects to be guided the chondrogenic and osteogenic differentiation for stem cells and provides a promising solution for osteochondral tissue repair in this study. The subchondral bone scaffold approach is based on the developed finer and denser 3D ß-tricalcium phosphate (ß-TCP) bioceramic scaffold process, which is made using a digital light processing (DLP) technology and the novel photocurable negative thermo-responsive (NTR) bioceramic slurry. Then, the concave-top disc sintered 3D-printed bioceramic incorporates the human adipose-derived stem cells (hADSCs) laden photo-cured hybrid biohydrogel (HG + 0.5AFnSi) comprised of hyaluronic acid methacryloyl (HAMA), gelatin methacryloyl (GelMA), and 0.5% (w/v) acrylate-functionalized nano-silica (AFnSi) crosslinker. The 3D ß-TCP bioceramic compartment is used to provide essential mechanical support for cartilage regeneration in the long term and slow biodegradation. However, the apparent density and compressive strength of the 3D ß-TCP bioceramics can be obtained for ~ 94.8% theoretical density and 11.38 ± 1.72 MPa, respectively. In addition, the in vivo results demonstrated that the hADSC + HG + 0.5AFnSi/3D ß-TCP of the bilayer osteochondral graft showed a much better osteochondral defect repair outcome in a rabbit model. The other word, the subchondral bone scaffold of 3D ß-TCP bioceramic could accelerate the bone formation and integration with the adjacent host cancellous tissue at 12 weeks after surgery. And then, a thicker cartilage layer with a smooth surface and uniformly aligned chondrocytes were observed by providing enough steady mechanical support of the 3D ß-TCP bioceramic scaffold.

Removing anonymity protection and utilization review decisions: a real-world case under a single-payer health system.

The effects of anonymity on utilization review has never been examined in the real world. This study aimed to evaluate the impact of removing anonymity protection for claims reviewers on their review decisions. Using a single-blinded repeated measures design, we randomly selected 1457 claims cases (with 12,237 orders) that had been anonymously reviewed and reimbursed in 2016 and had them re-reviewed in a signed review program in 2017 under the Taiwanese National Health Insurance scheme. The signed review policy significantly decreased the likelihood of a deduction decision at the case and the order level (P < 0.001). Furthermore, signed reviewers tended to make more "too lenient" decisions, and were less likely to make "too harsh" decisions. Removing anonymity protection dramatically reduced the deduction rate and overturned the tendency of decisions from "too harsh" to "too lenient". However, whether to maintain the anonymity of utilization reviews is a challenge for health authorities around the globe.

Characteristic and Chondrogenic Differentiation Analysis of Hybrid Hydrogels Comprised of Hyaluronic Acid Methacryloyl (HAMA), Gelatin Methacryloyl (GelMA), and the Acrylate-Functionalized Nano-Silica Crosslinker.

Developing a biomaterial suitable for adipose-derived stem cell (ADSCs)-laden scaffolds that can directly bond to cartilage tissue surfaces in tissue engineering has still been a significant challenge. The bioinspired hybrid hydrogel approaches based on hyaluronic acid methacryloyl (HAMA) and gelatin methacryloyl (GelMA) appear to have more promise. Herein, we report the cartilage tissue engineering application of a novel photocured hybrid hydrogel system comprising HAMA, GelMA, and 0~1.0% (w/v) acrylate-functionalized nano-silica (AFnSi) crosslinker, in addition to describing the preparation of related HAMA, GelMA, and AFnSi materials and confirming their related chemical evidence. The study also examines the physicochemical characteristics of these hybrid hydrogels, including swelling behavior, morphological conformation, mechanical properties, and biodegradation. To further investigate cell viability and chondrogenic differentiation, the hADSCs were loaded with a two-to-one ratio of the HAMA-GelMA (HG) hybrid hydrogel with 0~1.0% (w/v) AFnSi crosslinker to examine the process of optimal chondrogenic development. Results showed that the morphological microstructure, mechanical properties, and longer degradation time of the HG+0.5% (w/v) AFnSi hydrogel demonstrated the acellular novel matrix was optimal to support hADSCs differentiation. In other words, the in vitro experimental results showed that hADSCs laden in the photocured hybrid hydrogel of HG+0.5% (w/v) AFnSi not only significantly increased chondrogenic marker gene expressions such as SOX-9, aggrecan, and type II collagen expression compared to the HA and HG groups, but also enhanced the expression of sulfated glycosaminoglycan (sGAG) and type II collagen formation. We have concluded that the photocured hybrid hydrogel of HG+0.5% (w/v) AFnSi will provide a suitable environment for articular cartilage tissue engineering applications.

Preparation of CO2 -Based Cationic Polycarbonate/Polyacrylonitrile Nanofibers with an Optimal Fibrous Microstructure for Antibacterial Applications.

Utilizing CO2 as one of the monomer resources, poly(vinylcyclohexene carbonates) (PVCHCs) are used as the precursor for preparing cationic PVCHCs (CPVCHCs) via thiol-ene click functionalization. Through the functionalization, CPVCHC-43 with a tertiary amine density of 43% relative to the backbone is able to display a significantly antibacterial ability against Staphylococcus aureus (S. aureus). Blending CPVCHC-43 with polyacrylonitrile (PAN), CPVCHC/PAN nanofiber meshes (NFMs) have been successfully prepared by electrospinning. More importantly, two crucial fibrous structural factors including CPVCHC/PAN weight ratio and fiber diameter have been systematically investigated for the effects on the antibacterial performance of the NFMs. Sequentially, a quaternization treatment has been employed on the NFMs with an optimal fibrous structure to enhance the antibacterial ability. The resulting quaternized NFMs have demonstrated the great biocidal effects against Gram-positive and Gram-negative bacteria. Moreover, the excellent biocompatibility of the quaternized NFMs have also been thoroughly evaluated and verified.

Generating adipose stem cell-laden hyaluronic acid-based scaffolds using 3D bioprinting via the double crosslinked strategy for chondrogenesis.

Bioprinting of most cell-laden hydrogel scaffolds with the required structural integrity, mechanical modulus, cell adhesion, cell compatibility, and chondrogenic differentiation are still significant issues that affect the application of bioinks in cartilage tissue engineering. This study focuses on constructing printable bioinks by combining adipose-derived stem cells (ADSCs), hyaluronic acid (HA)-based hydrogels and analyzing their ability to induce chondrogenesis using 3D bioprinting technology. First, biotinylated hyaluronic acid was synthesized via an adipic acid dihydrazide (ADH) linker with amide bond formation to form HA-biotin (HAB). Both HAB and the as-received streptavidin were mixed to form a partially cross-linked HA-biotin-streptavidin (HBS) hydrogel through noncovalent bonding. After that, the partially cross-linked HBS hydrogel was mixed with sodium alginate and subsequently printed to form the HBSA hydrogel 3D scaffolds using a bioprinter. Finally, the 3D scaffolds of the HBSA (HBS + alginate) hydrogel were submerged into CaCl2 solution to achieve a stable 3D HBSAC (HBSA + Ca2+) hydrogel scaffold through ion transfer crosslinking. The physical-chemical characteristics of the hybrid bioink compositions have been evaluated to determine the desired 3D bioprinting structure. Cytotoxicity and chondrogenic differentiation were also assessed to confirm that the double cross-linked HBSAC hydrogel scaffold was useful for chondrogenic formation. The results showed that partially crosslinking the biotinylated HA-based hydrogel with streptavidin has a significant effect on printability and structural integrity. Morphological analysis of a suitable 3D printed HBSAC hydrogel scaffold showed visible pores with the desired shape and geometry. We have concluded that the HBSAC hydrogel possesses a favorable biocompatibility profile. The HBSAC hydrogel can also secrete significantly higher amounts of chondrogenic marker genes at day 5 and sulfated glycosaminoglycans (sGAGs) from days 7 to 14 compared to the HA hydrogel, as determined via quantitative real-time PCR assay and Alcian blue staining and the DMMB assay.

DDR1 regulates the stabilization of cell surface E-cadherin and E-cadherin-mediated cell aggregation.

The stabilization of cell surface E-cadherin is important for the maintenance of apical junction complexes and epithelial polarity. Previously, we reported that discoidin domain receptor 1 (DDR1) forms a complex with E-cadherin at adhesive contacts; however, the regulatory role of DDR1 in the stabilization of cell surface E-cadherin and E-cadherin-mediated cell behaviors remained undefined. To gain insight into these questions, we utilized two stable clones depleted for DDR1 via the small interfering RNA (siRNA) technique, and we over-expressed DDR1 in MDCK cells. We performed Western blotting, immunofluorescence analysis, flow cytometry, and cell aggregation studies to investigate the effect of DDR1 on cell surface E-cadherin. The results showed that both DDR1/2 and E-cadherin use their extracellular domains to form DDR/E-cadherin complexes. Neither the depletion nor the over-expression of DDR1 changed the expression level of E-cadherin in MDCK cells. Collagen disrupted the formation of E-cadherin complexes and caused E-cadherin to accumulate in the cytoplasm; however, over-expression of DDR1 stabilized E-cadherin on the cell surface and decreased its cytoplasmic accumulation. Furthermore, independently of collagen stimulation, the depletion of DDR1 resulted in a decrease in the level of cell surface E-cadherin, which consequently caused its cytoplasmic accumulation and decreased E-cadherin-mediated cell aggregation. These results indicate that DDR1 can increase the stability of cell surface E-cadherin and promote MDCK cell aggregation, which may be mediated through the formation of DDR1/E-cadherin complexes. Overall, these findings have implications for the physiological roles of DDR1 in association with the maintenance of both the adhesion junction and epithelial polarity.

Decreased expression of thrombomodulin is correlated with tumor cell invasiveness and poor prognosis in nonsmall cell lung cancer.

Thrombomodulin (TM) plays a role in coagulation, inflammation, and cell adhesion. Reduction of TM expression plays an important role in the tumor metastatic process; however, insufficient information is available regarding the expression of TM in nonsmall cell lung cancer (NSCLC). Sixty NSCLC patients who underwent surgery were reviewed for TM expression and multiple variables were assessed by univariate and multivariate analyses. The expression level of TM and its metastatic ability were examined in vitro using the human NSCLC A549 cell line. TM expression in NSCLC was significantly correlated with survival; the 5-yr survival rates of patients with high and low TM expression were 23% and 18% (P < 0.01), respectively. Distribution of TM was detected predominantly in the normal lung tissue compared with lung cancer tissue. Western blot analysis showed, on average, decreased expression levels of TM protein in the lung cancer tissues of patients with NSCLC. An in vitro study also showed that overexpression of TM can inhibit the invasiveness and migration ability of the A549 cell line, whereas silencing of TM significantly enhanced these processes. This inhibition of cellular migration by overexpression of TM was significantly prevented by the selective inhibitors of PI3K and Akt, but not by MAPK inhibitors. This study demonstrates that a decrease in TM expression may be an indicator in the prognosis of NSCLC patients and provides new insights into the molecular mechanisms of TM in the metastasis of NSCLC.

Anti-inflammatory drugs suppress proliferation and induce apoptosis through altering expressions of cell cycle regulators and pro-apoptotic factors in cultured human osteoblasts.

It has been reported that anti-inflammatory drugs (AIDs) inhibited bone repair in animal studies, and suppressed proliferation and induced cell death in rat osteoblast cultures. In this study, we further investigated the molecular mechanisms of AID effects on proliferation and cell death in human osteoblasts (hOBs). We examined the effects of dexamethasone (10(-7) and 10(-6)M), non-selective non-steroidal anti-inflammatory drugs (NSAIDs): indomethacin, ketorolac, piroxicam and diclofenac (10(-5) and 10(-4)M), and COX-2 inhibitor: celecoxib (10(-6) and 10(-5)M) on proliferation, cytotoxicity, cell death, and mRNA and protein levels of cell cycle and apoptosis-related regulators in hOBs. All the tested AIDs significantly inhibited proliferation and arrested cell cycle at G0/G1 phase in hOBs. Celecoxib and dexamethasone, but not non-selective NSAIDs, were found to have cytotoxic effects on hOB, and further demonstrated to induce apoptosis and necrosis (at higher concentration) in hOBs. We further found that indomethacin, celecoxib and dexamethasone increased the mRNA and protein expressions of p27(kip1) and decreased those of cyclin D2 and p-cdk2 in hOBs. Bak expression was increased by celecoxib and dexamethasone, while Bcl-XL level was declined only by dexamethasone. Furthermore, the replenishment of PGE1, PGE2 or PGF2alpha did not reverse the effects of AIDs on proliferation and expressions of p27(kip1) and cyclin D2 in hOBs. We conclude that the changes in expressions of regulators of cell cycle (p27(kip1) and cyclin D2) and/or apoptosis (Bak and Bcl-XL) by AIDs may contribute to AIDs caused proliferation suppression and apoptosis in hOBs. This effect might not relate to the blockage of prostaglandin synthesis by AIDs.

Melamine contamination.

In the summer of 2008, serious illnesses and deaths of babies in China were linked to melamine-tainted powdered infant formula. Melamine contains several metabolites, such as ammeline, ammelide, and cyanuric acid, and has been used for the adulteration of foods or milk to increase their apparent protein content. It is assumed that melamine and its metabolites are absorbed in the gastrointestinal tract, and precipitate in the kidney to form crystals. A new tolerable daily intake of 0.2 mg kg(-1) body weight was adapted by the World Health Organization in 2008. This paper reviews the variety of analytical methods that have been used for the analysis of melamine in food. The limit of detection of these various methods is 0.05-100 ppm. The maximum acceptable concentration in food has been set at 50 ppb by the US FDA. A fast and ultrasensitive procedure for screening, detection, and characterization of melamine and its derivative compounds needs to be established. Currently, mass-spectrometry technologies provide an alternative to derivatization for regulatory analysis of food.

Optimized bone regeneration based on sustained release from three-dimensional fibrous PLGA/HAp composite scaffolds loaded with BMP-2.

Contemporary treatment of critical bone defect remains a significant challenge in the field of orthopedic surgery. Engineered biomaterials combined with growth factors have emerged as a new treatment alternative in bone repair and regeneration. Our approach is to encapsulate bone morphogenetic protein-2 (BMP-2) into a polymeric matrix in different ways and characterize their individual performance in a nude mouse model. The main objective of this study is to examine whether the PLGA/HAp composite fibrous scaffolds loaded with BMP-2 through electrospinning can improve bone regeneration. The hypothesis is that different loading methods of BMP-2 and different HAp contents in scaffolds can alternate the release profiles of BMP-2 in vivo, therefore modify the performance of scaffolds in bone regeneration. Firstly, mechanical strength of scaffolds and HAp nanoparticles distribution in scaffolds were investigated. Secondly, nude mice experiments extended to 6 weeks were carried out to test the in vivo performance of these scaffolds, in which measurements, like serum BMP-2 concentration, ALP activity, X-ray qualification, and H&E/IHC tissue staining were utilized to monitor the growth of new bone and the changes of the corresponding biochemical parameters. The results showed that the PLGA/HAp composite scaffolds developed in this study exhibited good morphology/mechanical strength and HAp nanoparticles were homogeneously dispersed inside PLGA matrix. Results from the animal experiments indicate that the bioactivity of BMP-2 released from the fibrous PLGA/HAp composite scaffolds is well maintained, which further improves the formation of new bone and the healing of segmental defects in vivo. It is concluded that BMP-2 loaded PLGA/HAp composite scaffolds are promising for bone healing.

Enhancement of chondrogenesis of adipose-derived stem cells in HA-PNIPAAm-CL hydrogel for cartilage regeneration in rabbits.

Injectable thermoresponsive hydrogels have the advantages of effective cell delivery and minimal invasion for tissue engineering applications. In this study, we investigated the chondroinductive potential of newly developed hyaluronic acid (HA)-modified thermoresponsive poly(N-isopropylacrylamide) (HA-PNIPAAm-CL) hydrogels on enhancing rabbit ADSC (rADSC) chondrogenesis in vitro and in the synovial cavity of rabbit. The HA-mixed PNIPAAm (HA-PNIPAAm-CP) and HA-cross-linked PNIPAAm (HA-PNIPAAm-CL) were fabricated using physical interaction and chemical cross-linking methods, respectively. The in vitro results showed that, compared to unmodified PNIPAAm, both HA-modified hydrogels significantly increased cell viability, chondrogenic marker gene (aggrecan and type II collagen) expression and sulfide glycosaminoglycan (sGAG) formation in embedded rADSCs. However, HA-PNIPAAm-CL showed the highest rADSC viability and chondrogenesis. The chondrogenic effects of HA-modified hydrogels on rADSCs were confirmed in vivo by the intraarticular injection of hydrogel-embedded rADSC constructs into rabbit synovial cavities for 3 weeks and tracing with CM-DiI labeling. Neocartilage formation in the hydrogels was determined by histomorphological staining of GAG and type II collagen. In vivo injected rADSC/HA-PNIPAAm-CL constructs showed more hyaline cartilage formation than that of rADSC/HA-PNIPAAm-CP and rADSC/PNIPAAm constructs in the synovial cavity of rabbit. These results suggest that the HA-PNIPAAm-CL provides a suitable microenvironment to enhance ADSC chondrogenesis for articular cartilage tissue engineering applications.

Rapid In Situ MRI Traceable Gel-forming Dual-drug Delivery for Synergistic Therapy of Brain Tumor.

Preventing tumor recurrence after surgical resection of a brain tumor is a significant clinical challenge because current methods deliver chemotherapeutic agents in a rapid manner and are not effective against the residual tumor cells. To overcome this drawback, we report a simple method to prepare magnetic resonance imaging (MRI) traceable ultra-thermosensitive hydrogels with rapid gelation ability from aqueous solution within 4 s at 28 °C for hydrophilic (epirubicin, EPI) and hydrophobic (paclitaxel, PTX) drugs co-delivery with bovine serum albumin nanoparticles (BSA NPs) incorporation. The results showed the average survival of gliosarcoma-bearing (MBR 614 or U87) mice receiving BSA/PTX NPs incorporated hydrogelGd/EPI increased to 63 days or 69 days with no tumor recurrence observed. Our synergistic strategy presents a new approach to the development of a local drug delivery system for the prevention of brain tumor recurrence.

PLGA-linked alendronate enhances bone repair in diaphysis defect model.

Alendronate (ALN) is known as an anti-resorptive drug for the treatment of osteoporosis. Recently, ALN was found to stimulate osteogenic differentiation in mesenchymal stem cells and enhance new bone formation in calvarial bone defects. Previous in vitro and in vivo studies found that the effective concentration of ALN was approximately 1-10   µm. In the present study, a poly (lactic-co-glycolic acid) (PLGA) cross-linked ALN (PLGA-ALN) with a short-term controlled-release property for local application to enhance bone repair was developed. An in vitro drug-release kinetic test showed that PLGA-ALN microspheres released an effective concentration (50-100 nm) of ALN for 9 days. The effect of PLGA-ALN on bone repair was tested in a rat femoral bone defect model. The biomechanical study results showed that the maximal strength, stiffness and energy absorption were significantly increased in the PLGA-ALN group compared with the PLGA group. The microstructure of the newly formed bone at the defect site was analysed using microcomputed tomography. The PLGA-ALN group significantly improved the trabecular bone volume at the defect site compared with the PLGA group. The fibril collagen and immunolocalized bone morphogenetic protein 2 were evident in the newly formed trabecular bone in the PLGA-ALN group. Local use of newly developed PLGA-ALN-enhanced bone repair was attributable to increasing bone matrix formation, which improved the ultrastructure of the newly formed bone and thus increased the biomechanical properties of the repaired bone. It is suggested that PLGA-ALN may be a potential bone graft substitute to enhance bone repair. Copyright © 2016 John Wiley & Sons, Ltd.

Combination of calcium sulfate and simvastatin-controlled release microspheres enhances bone repair in critical-sized rat calvarial bone defects.

Most allogenic bone graft substitutes have only osteoconductive properties. Developing new strategies to improve the osteoinductive activity of bone graft substitutes is both critical and practical for clinical application. Previously, we developed novel simvastatin-encapsulating poly(lactic-co-glycolic acid) microspheres (SIM/PLGA) that slowly release simvastatin and enhance fracture healing. In this study, we combined SIM/PLGA with a rapidly absorbable calcium sulfate (CS) bone substitute and studied the effect on bone healing in critical-sized calvarial bone defects in a rat model. The cytotoxicity and cytocompatibility of this combination was tested in vitro using lactate dehydrogenase leakage and a cell attachment assay, respectively. Combination treatment with SIM/PLGA and the CS bone substitute had no cytotoxic effect on bone marrow stem cells. Compared with the control, cell adhesion was substantially enhanced following combination treatment with SIM/PLGA and the CS bone substitute. In vivo, implantation of the combination bone substitute promoted healing of critical-sized calvarial bone defects in rats; furthermore, production of bone morphogenetic protein-2 and neovascularization were enhanced in the area of the defect. In summary, the combination of SIM/PLGA and a CS bone substitute has osteoconductive and osteoinductive properties, indicating that it could be used for regeneration of bone in the clinical setting.