RESUMO
Human biomonitoring involves monitoring human health by measuring the accumulation of harmful chemicals, typically in specimens like blood samples. The high cost of chemical analysis has led researchers to adopt a cost-effective approach. This approach physically combines specimens and subsequently analyzes the concentration of toxic substances within the merged pools. Consequently, there arises a need for innovative regression techniques to effectively interpret these aggregated measurements. To address this need, a new regression framework is proposed by extending the additive partially linear model (APLM) to accommodate the pooling context. The APLM is well-known for its versatility in capturing the complex association between outcomes and covariates, which is particularly valuable in assessing the complex interplay between chemical bioaccumulation and potential risk factors. Consistent estimators of the APLM are obtained through an iterative process that disaggregates information from the pooled observations. The performance is evaluated through simulations and an environmental health study focused on brominated flame retardants using data from the National Health and Nutrition Examination Survey.
RESUMO
Estimating ecological environmental flow in tidal rivers is one of the major challenges for sustainable water resource management in estuaries and river basins. This paper presents an ecological environmental flow framework that was developed to accommodate highly dynamic medium tidal estuaries found along the Yellow Sea coast of China. The framework not only proposes a method of water quality-based ecological flow for tidal gate-controlled rivers but also proposes a method of water demand for scouring and silting to protect ports in coastal viscous sediment environments. The framework integrates the instream water requirements of water quality, sediment and basic ecological flow, and considers the temporal and spatial variation differences for the environmental flow requirements of tidal rivers. This study emphasizes the significance and necessity of continuous monitoring of ecological data in determining the environmental flow of tidal rivers. The output of this study could provide vital references for decision-making and management of the water resource allocation and ecological protection in tidal rivers.
Assuntos
Rios , Movimentos da Água , China , Monitoramento Ambiental/métodos , Qualidade da Água , Ecossistema , Modelos TeóricosRESUMO
BACKGROUND: The aim of this study was to explore the efficacy of a novel intramedullary fixation technique using the ortho-bridge system (OBS) for midshaft clavicle fractures. METHODS: A total of 63 patients were included in this study: 35 underwent plate internal fixation (LP group) and 28 underwent OBS intramedullary fixation (OBS group). Surgical time, intraoperative blood loss, incision length, fracture healing time, removal of the internal fixation agent, visual analog scale (VAS) score for shoulder pain, Constant-Murley shoulder score and complication occurrence were compared between the two groups. RESULTS: Preoperative general data, such as sex, age and fracture type, were not significantly different between the two groups (P > 0.05). However, the OBS group exhibited better outcomes than the LP group exhibited in terms of surgical time, intraoperative blood loss and total incision length (P < 0.05). Additionally, the OBS group exhibited a significantly shorter fracture healing time and internal-fixation removal time than the LP group exhibited (P < 0.05). The VAS scores on postoperative day 1, week 1, month 1 and month 3 were lower in the OBS group than in the LP group (P < 0.05). Furthermore, the Constant-Murley shoulder scores at 1, 3, and 6 months postoperatively were higher in the OBS group than in the LP group (P < 0.05), with no significant difference at 1 year after surgery (P > 0.05). None of the patients in the OBS group experienced scarring of the surgical incision, and 6 patients in the LP group experienced scarring of the surgical incision. Finally, the complication incidence in the OBS group was lower than that in the LP group. CONCLUSION: For midshaft clavicle fractures, OBS intramedullary fixation is better than locking-plate internal fixation because it led to less trauma, a faster recovery, better efficacy, and better esthetic outcomes and comfort. Therefore, this technique may have potential as a novel treatment for midshaft clavicle fractures. LEVEL OF EVIDENCE: III, retrospective observational study.
Assuntos
Placas Ósseas , Clavícula , Fixação Intramedular de Fraturas , Consolidação da Fratura , Fraturas Ósseas , Duração da Cirurgia , Humanos , Clavícula/lesões , Clavícula/cirurgia , Masculino , Feminino , Estudos Retrospectivos , Fraturas Ósseas/cirurgia , Adulto , Fixação Intramedular de Fraturas/métodos , Pessoa de Meia-Idade , Resultado do Tratamento , Medição da Dor , Perda Sanguínea Cirúrgica/estatística & dados numéricos , Fixação Interna de Fraturas/métodosRESUMO
Internal electric field (IEF) construction is an innovative strategy to regulate the electronic structure of electrode materials to promote charge transfer processes. Despite the wide use of IEF in various applications, the underlying mechanism of its formation in an asymmetric TM-O-TM unit still remains poorly understood. Herein, the essential principles for the IEF construction at electron occupancy state level and explore its effect on hybrid capacitive deionization (HCDI) performance is systematically investigated. By triggering a charge separation in Ni-MnO2 via superexchange interactions in a coordination structure unit of Mn4+ -O2- -Ni2+ , the formation of an IEF that can enhance charge transfer during the HCDI process is demonstrated. Experimental and theoretical results confirm the electrons transfer from O 2p orbital to TM (Ni2+ and Mn4+ ) eg orbital via superexchange interactions in the basic Mn4+ -O2- -Ni2+ coordination unit. As a result of the charge redistribution, the IEF endows Ni-MnO2 with superior electron and ion transfer property. This work presents a unique material design strategy that activates the electrochemical performance, and provides insights into the formation mechanism of IEF in an asymmetric TM-O-TM unit, which has potential applications in the construction of other innovative materials.
RESUMO
Transition metal oxides suffer from slow salt removal rate (SRR) due to inferior ions diffusion ability in hybrid capacitive deionization (HCDI). Local electric field (LEF) can efficiently improve the ions diffusion kinetics in thin electrodes for electrochemical energy storage. Nevertheless, it is still a challenge to facilitate the ions diffusion in bulk electrodes with high loading mass for HCDI. Herein, this work delicately constructs a LEF via engineering atomic-level donor (O vacancies)-acceptor (Mn atoms) couples, which significantly facilitates the ions diffusion and then enables a high-performance HCDI. The LEF boosts an extended accelerated ions diffusion channel at the particle surface and interparticle space, resulting in both remarkably enhanced SRR and salt removal capacity. Convincingly, the theoretical calculations demonstrate that electron-enriched Mn atoms center coupled with an electron-depleted O vacancies center is formed due to the electron back-donation from O vacancies to adjacent Mn centers. The resulted LEF efficiently reduce the ions diffusion energy barrier. This work sheds light on the effect of atomic-level LEF on improving ions diffusion kinetics at high loading mass application and paves the way for the design of transition metal oxides toward high-performance HCDI applications.
RESUMO
BACKGROUND: A locking compression plate (LCP) of the distal femur is used as an external fixator for lower tibial fractures. However, in clinical practice, the technique lacks a standardized approach and a strong biomechanical basis for its stability. METHODS: In this paper, internal tibial LCP fixator (Group IT-44), external tibial LCP fixator (Group ET-44), external distal femoral LCP fixator (Group EF-44, group EF-33, group EF-22), and conventional external fixator (Group CEF-22) frames were used to fix unstable fracture models of the lower tibial segment, and anatomical studies were performed to standardize the operation as well as to assess the biomechanical stability and adjustability of the distal femoral LCP external fixator by biomechanical experiments. RESULTS: It was found that the torsional and flexural stiffnesses of group EF-44 and group EF-33 were higher than those of group IT-44 and group ET-44 (p < 0.05); the flexural stiffness of group EF-22 was similar to that of group IT-44 (p > 0.05); and the compressive stiffness of all three EF groups was higher than that of group ET-44 (p < 0.05). In addition, the flexural and compressive stiffnesses of the three EF groups decreased with the decrease in the number of screws (p < 0.05), while the torsional stiffness of the three groups did not differ significantly between the two adjacent groups (p > 0.05). Group CEF-22 showed the highest stiffnesses, while group ET-44 had the lowest stiffnesses (P < 0.05). CONCLUSIONS: The study shows that the distal femoral LCP has good biomechanical stability and adjustability and is superior to the tibial LCP as an external fixator for distal tibial fractures, as long as the technique is used in a standardized manner according to the anatomical studies in this article.
Assuntos
Fixadores Externos , Fraturas da Tíbia , Humanos , Fenômenos Biomecânicos , Fraturas da Tíbia/diagnóstico por imagem , Fraturas da Tíbia/cirurgia , Placas Ósseas , Fêmur , Fixação Interna de Fraturas/efeitos adversosRESUMO
Objective: This review assessed evidence on the impact of prior coronary artery bypass grafting (CABG) on outcomes of percutaneous coronary intervention (PCI) for chronic total occlusions (CTO). Methods: PubMed, CENTRAL, Embase, ScienceDirect, and Google Scholar databases were searched from 1st January 1980 up to 10th January 2022 for studies assessing outcomes of CTO-PCI in patients with and without prior-CABG. Results: Eight studies were included. The meta-analysis demonstrated significantly reduced odds of procedural success in patients with prior history of CABG (OR: 0.51 95% CI: 0.41, 0.64 I2=84% p<0.00001). There was a tendency of increased in-hospital mortality (OR: 1.72 95% CI: 0.97, 3.04 I2=26% p=0.06) and major adverse cardiac events (MACE) (OR: 1.30 95% CI: 0.99, 1.69 I2=0% p=0.05), along with a significantly increased risk of myocardial infarction (MI) (OR: 2.56 95% CI: 1.65, 3.97 I2=0% p<0.0001) and coronary perforation (OR: 1.52 95% CI: 1.03, 2.24 I2=70% p=0.04) in patients with history of CABG. There was no difference in the risk of stroke, pericardial tamponade, major bleeding, vascular access complications, and renal failure. Conclusion: Our results suggest that patients with prior history of CABG undergoing PCI for CTO have a 49% reduced chance of procedural success. Such patients are at an increased risk of in-hospital mortality, MACE, MI, and coronary perforation.
RESUMO
Human biomonitoring involves measuring the accumulation of contaminants in biological specimens (such as blood or urine) to assess individuals' exposure to environmental contamination. Due to the expensive cost of a single assay, the method of pooling has become increasingly common in environmental studies. The implementation of pooling starts by physically mixing specimens into pools, and then measures pooled specimens for the concentration of contaminants. An important task is to reconstruct individual-level statistical characteristics based on pooled measurements. In this article, we propose to use the varying-coefficient regression model for individual-level biomonitoring and provide methods to estimate the varying coefficients based on different types of pooled data. Asymptotic properties of the estimators are presented. We illustrate our methodology via simulation and with application to pooled biomonitoring of a brominated flame retardant provided by the National Health and Nutrition Examination Survey (NHANES).
Assuntos
Monitoramento Biológico , Exposição Ambiental , Humanos , Inquéritos Nutricionais , Simulação por Computador , Análise de RegressãoRESUMO
The oxidation/weathering of molybdenite (MoS2) is too slow to be monitored, even under pure oxygen and high temperatures, while it proceeds rapidly through humid air. The adsorption of water molecules on molybdenite is necessary for the wet oxidation/weathering of molybdenite. Therefore, we employ kinetic Monte Carlo modeling to clarify the adsorption isotherm, site preferences and kinetics of water on different surfaces of molybdenite. Our results indicate that (1) the adsorption capacity and adsorption rate coefficient of H2O on the (110) surface are significantly larger than those on the (001) surface at a temperature of 0~100 °C and a relative humidity of 0~100%, suggesting that the (110) surface is the predominant surface controlling the reactivity and solubility of molybdenite in its interaction with water; (2) the kinetic Monte Carlo modeling considering the adsorption/desorption rate of H2O, dissociation/formation rate of H2O and adsorption/desorption of dissociated H indicates that the adsorption and dissociation of H2O on the (110) surface can be completed in one microsecond (ms) at 298 K and in wet conditions; (3) the adsorption and dissociation of H2O on molybdenite are not the rate-limiting steps in the wet oxidation/weathering of molybdenite; and (4) kinetic Monte Carlo modeling explains the experimental SIMS observation that H2O and OH (rather than H+/H- or H2O) occupy the surface of MoS2 in a short time. This study provides new molecular-scale insights to aid in our understanding of the oxidation/weathering mechanism of molybdenite as the predominant mineral containing molybdenum in the Earth's crust.
RESUMO
Copper oxide-based materials effectively electrocatalyze carbon dioxide reduction (CO2 RR). To comprehend their role and achieve high CO2 RR activity, Cu+ in copper oxides must be stabilized. As an electrocatalyst, Cu2 O nanoparticles were decorated with hexagonal boron nitride (h-BN) nanosheets to stabilize Cu+ . The C2 H4 /CO ratio increased 1.62-fold in the CO2 RR with Cu2 O-BN compared to that with Cu2 O. Experimental and theoretical studies confirmed strong electronic interactions between the two components in Cu2 O-BN, which strengthens the Cu-O bonds. Electrophilic h-BN receives partial electron density from Cu2 O, protecting the Cu-O bonds from electron attack during the CO2 RR and stabilizing the Cu+ species during long-term electrolysis. The well-retained Cu+ species enhanced the C2 product selectivity and improved the stability of Cu2 O-BN. This work offers new insight into the metal-valence-state-dependent selectivity of catalysts, enabling the design of advanced catalysts.
RESUMO
Group testing involves pooling individual specimens (e.g., blood, urine, swabs, etc.) and testing the pools for the presence of disease. When the proportion of diseased individuals is small, group testing can greatly reduce the number of tests needed to screen a population. Statistical research in group testing has traditionally focused on applications for a single disease. However, blood service organizations and large-scale disease surveillance programs are increasingly moving towards the use of multiplex assays, which measure multiple disease biomarkers at once. Tebbs and others (2013, Two-stage hierarchical group testing for multiple infections with application to the Infertility Prevention Project. Biometrics69, 1064-1073) and Hou and others (2017, Hierarchical group testing for multiple infections. Biometrics73, 656-665) were the first to examine hierarchical group testing case identification procedures for multiple diseases. In this article, we propose new non-hierarchical procedures which utilize two-dimensional arrays. We derive closed-form expressions for the expected number of tests per individual and classification accuracy probabilities and show that array testing can be more efficient than hierarchical procedures when screening individuals for multiple diseases at once. We illustrate the potential of using array testing in the detection of chlamydia and gonorrhea for a statewide screening program in Iowa. Finally, we describe an R/Shiny application that will help practitioners identify the best multiple-disease case identification algorithm.
Assuntos
Algoritmos , Bioensaio , Doenças Transmissíveis/diagnóstico , Programas de Rastreamento , Modelos Teóricos , Bioensaio/métodos , Bioensaio/normas , Infecções por Chlamydia/diagnóstico , Gonorreia/diagnóstico , Humanos , Iowa , Programas de Rastreamento/métodos , Programas de Rastreamento/normasRESUMO
Aqueous zinc-ion hybrid supercapacitors are considered to be a newly emerging electrochemical energy storage devices. However, the exploration and design of advanced cathode materials remain a huge challenge. Herein, we developed a versatile one-step magnesiothermic reduction and self-activation process for the synthesis of highly-curved carbon nanosheets (HCCNs) with hierarchical pore structures. In this process, low-molecular weight organic potassium salts (e.g. potassium bitartrate, potassium acetate, potassium oxalate, potassium formate, potassium oleate, potassium sorbate), which usually used as the chemical activating reagents, serve as the carbon source whereas the Mg power acts as the reducing agent. The resulting HCCNs possess hierarchical porosity and unique HCCN geometry which can afford abundant active sites for charge accumulation as well as the highly efficient ions diffusion kinetics. Because of the high ratio of surface-controlled capacitive contribution and high ions diffusion coefficient, the optimized sample can exhibit excellent charge storage performance with an impressive reversible capacity (200.2 mAh g-1), excellent rate capability, and good cyclic stability. The excellent capacitive behaviors combined with the feasible synthetic procedure make the present synthetic protocol a promising choice towards well-designed nanocarbons for electrochemical energy storage applications.
RESUMO
INTRODUCTION: Spinocerebellar ataxias (SCAs) are a heterozygous group of neurodegenerative disorders. Spinocerebellar ataxia type 5 (SCA5) is a rare autosomal-dominant ataxia with pure cerebellum involvement. The clinical characteristics are limb and gait ataxia, trunk ataxia, sensory deficits, abnormal eye movement, dysarthria, and hyperactive tendon reflexes. Spectrin beta nonerythrocytic 2 gene (SPTBN2), coding ß-III spectrin protein, was identified to be associated with SCA5. To date, more than 19 variants of SPTBN2 have been reported. METHODS: A family and an apparently sporadic patient with ataxia and cerebellar atrophy were recruited from Shandong Province (China). To discover the disease-causing variants, capillary electrophoresis and targeted next-generation sequencing were performed in the proband of the family and the sporadic patient. The candidate variants were verified by Sanger sequencing and analyzed by bioinformatics software. RESULTS: In our study, we verified two novel heterozygous variants in SPTBN2 in a SCA pedigree and a sporadic patient. The proband of the pedigree and her mother presented with walking instability and progressively getting worse. The sporadic patient suffered from slurred speech, walking instability, and drinking water choking cough. MRI examination of the proband and sporadic patient both displayed moderate cerebellar atrophy. The variants identified were traditionally conserved and predicted probably damaging and disease-causing by bioinformatics analysis. CONCLUSION: We identified two novel heterozygous variants of SPTBN2 resulting in severe ataxia which further delineated the correlation between the genotype and phenotype of SCA5, and pathogenesis of variants in SPTBN2 should be further researched.
Assuntos
Ataxia Cerebelar , Ataxias Espinocerebelares , Feminino , Humanos , Mutação de Sentido Incorreto , Linhagem , Espectrina/genética , Ataxias Espinocerebelares/diagnóstico por imagem , Ataxias Espinocerebelares/genéticaRESUMO
The study was designed to explore the underlying mechanism of micro ribonucleic acids (miR)-145-5p in the process of hypertrophic scar (HS). The difference in the relative content of miR-145-5p between HS and adjacent normal skin collected from 5 patients was detected via RT-PCR. Expressions of Smad2 and Smad3 with or without TGF-ß1 was detected by western blotting. Fibroblasts apoptosis rate was examined by Annexin V/Propidium Iodide double staining. HS fibroblasts (HSFs) were isolated from HS tissues, cultured and then divided into control group, miR-145-5p inhibitor group (transfected with miR-145-5p inhibitor) and miR-145-5p mimic group (transfected with miR-145-5p plasmid) based on different treatment methods. Next, CCK-8 was employed to examine the function of miR-145-5p in HSF proliferation. Luciferase assay was conducted to confirm whether Smad2/3 were direct targets of miR-145-5p, and RT-PCR was done to measure the expression of miR-145-5p, Smad2/Smad3 and fibrosis-related genes of fibroblasts in three groups. Wound injury mice model was established to determine the function of miR-145-5p in regulating scar formation. miR-145-5p was found lowly expressed in HS tissues. Compared with Control group, miR-145-5p mimic decreased the levels of Smad2/3, arrested the activation and proliferation of HSFs and induced HSFs apoptosis. Overexpressing miR-145-5p achieved the contrary results. Smad2/3 was confirmed as the target of miR-145-5p. Moreover, miR-145-5p mimic decreased the recruitment of fibroblasts in vivo and decreased the expression of fibrosis-related genes after wound injury. In conclusion, miR-145-5p arrests the development of fibrogenesis and decreases HS formation by reducing the expression of Smad2/3. miR-145-5p may be an optional novel molecular target for treating HS.
Assuntos
Cicatriz Hipertrófica/genética , Cicatriz Hipertrófica/patologia , Regulação da Expressão Gênica , MicroRNAs/metabolismo , Proteína Smad2/genética , Proteína Smad3/genética , Adulto , Animais , Sequência de Bases , Movimento Celular , Proliferação de Células/genética , Citocinas/metabolismo , Matriz Extracelular/metabolismo , Feminino , Fibroblastos/metabolismo , Fibroblastos/patologia , Humanos , Masculino , Camundongos , MicroRNAs/genética , Transdução de Sinais , Proteína Smad2/metabolismo , Proteína Smad3/metabolismo , Adulto JovemRESUMO
The ordinal dominance curve (ODC) is a useful graphical tool to compare two population distributions. These distributions are said to satisfy uniform stochastic ordering (USO) if the ODC for them is star-shaped. A goodness-of-fit test for USO was recently proposed when both distributions are unknown. This test involves calculating the L p distance between an empirical estimator of the ODC and its least star-shaped majorant. The least favorable configuration of the two distributions was established so that proper critical values could be determined; i.e., to control the probability of type I error for all star-shaped ODCs. However, the use of these critical values can lead to a conservative test and minimal power to detect certain non-star-shaped alternatives. Two new methods for determining data-dependent critical values are proposed. Simulation is used to show both methods can provide substantial increases in power while still controlling the size of the distance-based test. The methods are also applied to a data set involving premature infants. An R package that implements all tests is provided.
RESUMO
We propose local polynomial estimators for the conditional mean of a continuous response when only pooled response data are collected under different pooling designs. Asymptotic properties of these estimators are investigated and compared. Extensive simulation studies are carried out to compare finite sample performance of the proposed estimators under various model settings and pooling strategies. We apply the proposed local polynomial regression methods to two real-life applications to illustrate practical implementation and performance of the estimators for the mean function.
RESUMO
For disease screening, group (pooled) testing can be a cost-saving alternative to one-at-a-time testing, with savings realized through assaying pooled biospecimen (eg, urine, blood, saliva). In many group testing settings, practitioners are faced with the task of conducting disease surveillance. That is, it is often of interest to relate individuals' true disease statuses to covariate information via binary regression. Several authors have developed regression methods for group testing data, which is challenging due to the effects of imperfect testing. That is, all testing outcomes (on pools and individuals) are subject to misclassification, and individuals' true statuses are never observed. To further complicate matters, individuals may be involved in several testing outcomes. For analyzing such data, we provide a novel regression methodology which generalizes and extends the aforementioned regression techniques and which incorporates regularization. Specifically, for model fitting and variable selection, we propose an adaptive elastic net estimator under the logistic regression model which can be used to analyze data from any group testing strategy. We provide an efficient algorithm for computing the estimator along with guidance on tuning parameter selection. Moreover, we establish the asymptotic properties of the proposed estimator and show that it possesses "oracle" properties. We evaluate the performance of the estimator through Monte Carlo studies and illustrate the methodology on a chlamydia data set from the State Hygienic Laboratory in Iowa City.
Assuntos
Interpretação Estatística de Dados , Programas de Rastreamento/métodos , Algoritmos , Infecções por Chlamydia/diagnóstico , Simulação por Computador , Humanos , Programas de Rastreamento/economia , Programas de Rastreamento/estatística & dados numéricos , Método de Monte Carlo , Análise de RegressãoRESUMO
Group testing, as a cost-effective strategy, has been widely used to perform large-scale screening for rare infections. Recently, the use of multiplex assays has transformed the goal of group testing from detecting a single disease to diagnosing multiple infections simultaneously. Existing research on multiple-infection group testing data either exclude individual covariate information or ignore possible retests on suspicious individuals. To incorporate both, we propose a new regression model. This new model allows us to perform a regression analysis for each infection using multiple-infection group testing data. Furthermore, we introduce an efficient variable selection method to reveal truly relevant risk factors for each disease. Our methodology also allows for the estimation of the assay sensitivity and specificity when they are unknown. We examine the finite sample performance of our method through extensive simulation studies and apply it to a chlamydia and gonorrhea screening data set to illustrate its practical usefulness.
Assuntos
Infecções por Chlamydia/diagnóstico , Gonorreia/diagnóstico , Programas de Rastreamento/estatística & dados numéricos , Análise de Regressão , Infecções por Chlamydia/epidemiologia , Simulação por Computador , Feminino , Gonorreia/epidemiologia , Humanos , Masculino , Programas de Rastreamento/métodos , Fatores de Risco , Estados Unidos/epidemiologiaRESUMO
The load-sharing model has been studied since the early 1940s to account for the stochastic dependence of components in a parallel system. It assumes that, as components fail one by one, the total workload applied to the system is shared by the remaining components and thus affects their performance. Such dependent systems have been studied in many engineering applications which include but are not limited to fiber composites, manufacturing, power plants, workload analysis of computing, software and hardware reliability, etc. Many statistical models have been proposed to analyze the impact of each redistribution of the workload; i.e., the changes on the hazard rate of each remaining component. However, they do not consider how long a surviving component has worked for prior to the redistribution. We name such load-sharing models as memoryless. To remedy this potential limitation, we propose a general framework for load-sharing models that account for the work history. Through simulation studies, we show that an inappropriate use of the memoryless assumption could lead to inaccurate inference on the impact of redistribution. Further, a real-data example of plasma display devices is analyzed to illustrate our methods.
Assuntos
Simulação por Computador , Modelos Estatísticos , Reprodutibilidade dos Testes , Software , Análise de Dados , Humanos , Memória , Sensibilidade e EspecificidadeRESUMO
Alzheimer's disease (AD) is the most common neurodegenerative disease characterized by excessive accumulation of the amyloid-ß peptide (Aß) in the brain, which has been considered to mediate the neuroinflammation process. Microglial activation is the main component of neuroimmunoregulation. In recent years, exosomes isolated from human umbilical cord mesenchymal stem cells (hucMSC-exosomes) have been demonstrated to mimic the therapeutic effects of hucMSCs in many inflammation-related diseases. In this study, exosomes from the supernatant of hucMSCs were injected into AD mouse models. We observed that hucMSC-exosomes injection could repair cognitive disfunctions and help to clear Aß deposition in these mice. Moreover, we found that hucMSC-exosomes injection could modulate the activation of microglia in brains of the mice to alleviated neuroinflammation. The levels of pro-inflammatory cytokines in peripheral blood and brains of mice were increased and the levels of anti-inflammatory cytokines were decreased. We also treated BV2 cells with hucMSC-exosomes in culture medium. HucMSC-exosomes also had inflammatory regulating effects to alternatively activate microglia and modulate the levels of inflammatory cytokines in vitro.