Continuous air purification by aqueous interface filtration and absorption.

The adverse impact of particulate air pollution on human health1,2 has prompted the development of purification systems that filter particulates out of air3-5. To maintain performance, the filter units must inevitably be replaced at some point, which requires maintenance, involves costs and generates solid waste6,7. Here we show that an ion-doped conjugated polymer-coated matrix infiltrated with a selected functional liquid enables efficient, continuous and maintenance-free air purification. As the air to be purified moves through the system in the form of bubbles, the functional fluid provides interfaces for filtration and for removal of particulate matter and pollutant molecules from air. Theoretical modelling and experimental results demonstrate that the system exhibits high efficiency and robustness: its one-time air purification efficiency can reach 99.6%, and its dust-holding capacity can reach 950 g m-2. The system is durable and resistant to fouling and corrosion, and the liquid acting as filter can be reused and adjusted to also enable removal of bacteria or odours. We anticipate that our purification approach will be useful for the development of specialist air purifiers that might prove useful in a settings such as hospitals, factories and mines.

Ultrahigh efficient emulsification with drag-reducing liquid gating interfacial behavior.

Emulsification is a crucial technique for mixing immiscible liquids into droplets in numerous areas ranging from food to medicine to chemical synthesis. Commercial emulsification methods are promising for high production, but suffer from high energy input. Here, we report a very simple and scalable emulsification method that employs the drag-reducing liquid gating structure to create a smooth liquid-liquid interface for the reduction of resistance and tunable generation of droplets with good uniformity. Theoretical modeling and experimental results demonstrate that our method exhibits ultrahigh efficiency, which can reach up to more than 4 orders of magnitude greater energy-saving compared to commercial methods. For temperature-sensitive biological components, such as enzymes, proteins, and bacteria, it can offer a comfortable environment to avoid exposure to high temperatures during emulsifying, and the interface also enables the suppression of fouling. This unique drag-reducing liquid gating interfacial emulsification mechanism promotes the efficiency of droplet generation and provides fresh insight into the innovation of emulsifications that can be applied in many fields, including the food industry, the daily chemical industry, biomedicine, material fabrication, the petrochemical industry, and beyond.

Dual-Ligand Red Perovskite Ink for Electrohydrodynamic Printing Color Conversion Arrays over 2540 dpi in Near-Eye Micro-LED Display.

The lack of stability of red perovskite nanocrystals (PeNCs) remains the main problem that restricts their patterning application. In this work, the dual-ligand passivation strategy was introduced to stabilize PeNCs and inhibit their halogen ion migration during high-voltage electrohydrodynamic (EHD) inkjet printing. The as-printed red arrays exhibit the highest emisson intensity and least blue shift compared with samples with other passivation strategies under a high electric field during EHD inkjet printing. Combining with blue and green PeNC inks, single-color and tricolor color conversion layer arrays were successfully printed, with minimum pixel size of 5 µm and the highest spatial resolution of 2540 dpi. The color coordinate of CsPbBrI2 NCs arrays are located close to the red point, with a color gumat of 97.28% of Rec. 2020 standard. All of these show great potential in the application of color conversion layers in a near-eye micro-LED display.

Expression of cytokine and Apoptosis-Associated genes in mice bone Marrow-Derived Macrophages stimulated with Brucella recombinant type IV secretion effectors.

BACKGROUND: Brucellosis is an economically important infectious caused by most commonly by Brucella. Detection of infected animals at the early stage is important for controlling the disease. The diagnostic antigens, usually protein antigens, have attracted much interest. However, the accurate mechanism of immune response is still unknown. The secretory effectors (BPE005, BPE275, and BPE123) of the type IV secretion system (T4SS) were involved in the intracellular circulation process of Brucella and the immune responses of the host. METHODS: Genes encoding three B. abortus effector proteins (BPE005, BPE275, and BPE123) of T4SS were cloned and the recombinant proteins were expressed and purified. The purified recombinant proteins were named rBPE005, rBPE275 and rBPE123. Then, the expressions of Th1- and Th2-related cytokine genes were analyzed in mice bone marrow-derived macrophages (BMDMs) after stimulation with rBPE005, rBPE275, and rBPE123. Furthermore, four apoptosis-associated genes (Caspase-3, Caspase-8, Bax, and Bcl-2) were also detected to explore the damage of the proteins to the cells. RESULTS: Expressions of all Th1- and Th2-related cytokine genes were induced with three proteins, and different cytokine expression patterns induced by each protein depend on the stimulation time and dose of protein. However, expressions of apoptosis-related genes did not change. CONCLUSION: These results showed that the secreted antigens of Brucella induced an immune reaction via the production of Th1- and Th2-type cytokines in BMDMs without exerting any damage on the cells.

Long-term PM2.5 exposure is associated with asthma prevalence and exhaled nitric oxide levels in children.

BACKGROUND: Exhaled nitric oxide concentration (FENO) is a marker of airway inflammation. This study aimed to evaluate the association of air pollution exposure with FENO levels and asthma prevalence with respiratory symptoms in school children. METHODS: We analyzed 4736 school children who reside in six townships near industrial areas in central Taiwan. We evaluated asthmatic symptoms, FENO, and conducted the environmental questionnaire. The personal exposure of PM2.5, NO, and SO2 was estimated using land-use regression models data on children's school and home addresses. RESULTS: Annual exposure to PM2.5 was associated with increased odds of physician-diagnosed asthma (OR = 1.595), exercise-induced wheezing (OR = 1.726), itchy eyes (OR = 1.417), and current nasal problems (OR = 1.334) (P < 0.05). FENO levels in the absence of infection were positively correlated with age, previous wheezing, allergic rhinitis, atopic eczema, near the road, and for children with high exposure to PM2.5 (P < 0.05). An increase of 1 µg/m3 PM2.5 exposure was significantly associated with a 1.0% increase in FENO levels for children after adjusting for potential confounding variables, including exposures to NO and SO2. CONCLUSIONS: Long-term exposures to PM2.5 posed a significant risk of asthma prevalence and airway inflammation in a community-based population of children. IMPACT: Annual exposure to PM2.5 was associated with increased odds of physician-diagnosed asthma and nasal problems and itchy eyes. Long-term exposures to PM2.5 were significantly associated with FENO levels after adjusting for potential confounding variables. This is first study to assess the association between FENO levels and long-term air pollution exposures in children near coal-based power plants. An increase of 1 µg/m3 annual PM2.5 exposure was significantly associated with a 1.0% increase in FENO levels. Long-term exposures to PM2.5 posed a significant risk of asthma prevalence and airway inflammation in a community-based population of children.

Interpretable machine learning guided by physical mechanisms reveals drivers of runoff under dynamic land use changes.

Human activities continuously impact water balances and cycling in watersheds, making it essential to accurately identify the responses of runoff to dynamic changes in land use types. Although machine learning models demonstrate promise in capturing the intricate interplay between hydrological factors, their "black box" nature makes it challenging to identify the dynamic drivers of runoff. To overcome this challenge, we employed an interpretable machine learning method to inversely deduce the dynamic determinants within hydrological processes. In this study, we analyzed land use changes in the Ningxia section of the middle Yellow River across four periods, laying the foundation for revealing how these changes affect runoff. The sub-watershed attributes and meteorological characteristics generated by the Soil and Water Assessment Tool (SWAT) model were used as input variables of the Extreme Gradient Boosting (XGBoost) model to simulate substantial sub-watershed rainfall runoff in the region. The XGBoost was interpreted using the SHapley Additive exPlanations (SHAP) to identify the dynamic responses of runoff to the land use changes over different periods. The results revealed increasingly frequent interchanges between the land use types in the study area. The XGBoost effectively captured the characteristics of the hydrological processes in the SWAT-derived sub-watersheds. The SHAP analysis results demonstrated that the promoting effect of agricultural land (AGRL) on runoff gradually weakens, while forests (FRST) continuously strengthen their restraining effect on runoff. Relevant land use policies provide empirical support for these findings. Furthermore, the interaction between meteorological variables and land use impacts the runoff generation mechanism and exhibits a threshold effect, with the thresholds for relative humidity (RH), maximum temperature (MaxT), and minimum temperature (MinT) determined to be 0.8, 25 °C, and 15 °C, respectively. This reverse deduction method can reveal hydrological patterns and the mechanisms of interaction between variables, helping to effectively addressing constantly changing human activities and meteorological conditions.

Associations of urinary phthalate metabolites with household environments among mothers and their preschool-age children.

Phthalates have become a matter of public health concern due to their extensive use worldwide and negative health effects. The evaluation of potential sources of phthalate exposure is crucial to design prevention strategies, especially for vulnerable populations. This study included 528 mother-child pairs in the Taiwan Mother Infant Cohort Study who were followed up at ages 3-6 years between 2016 and 2020. Each mother was interviewed by using a structured questionnaire containing questions on demographic characteristics and household environment factors, such as the use of plastic food packaging, residential visible mold, insecticide sprays, and electric mosquito repellents. Eleven phthalate metabolites were analyzed in urine samples simultaneously collected from the mother-child pairs. The phthalate metabolite urinary concentrations were higher among the children than among their mothers, except those of mono-ethyl phthalate (MEP) and mono-2-ethylhexyl phthalate (MEHP). Multiple linear regression analyses showed that urine samples collected during the summer showed higher concentrations of phthalate metabolites than those collected during the winter. Family income levels had negative associations with the concentrations of MnBP and metabolites of di-2-ethylhexyl phthalate (DEHP) in children. The use of plastic food packaging was positively associated with mono-n-butyl phthalate (MnBP) and metabolites of DEHP in mothers. Residential visible mold or mold stains were significantly associated with higher MnBP and DEHP metabolite concentrations in children. The use of insecticide sprays was positively associated with MnBP concentrations in children. Significant associations between household environmental factors and phthalate exposure were mostly found in children, potentially indicating different exposure pathways between mothers and their children. Findings from this study provide additional information for the design of prevention strategies to protect the health of children and women.

Shared decision-making for renal replacement treatment and illness perception in patients with advanced chronic kidney disease.

BACKGROUND: Current healthcare trends emphasize the use of shared decision-making (SDM) for renal replacement treatment (RRT) in patients with chronic kidney disease (CKD). This is crucial to understand the relationship between SDM and illness perception of CKD patients. Few studies have focused on SDM and illness perception status of CKD patients and the impact of illness perception on RRT after SDM. METHODS: In this cross-sectional study, we used a questionnaire with purposive sampling from March 2019 to February 2020 at the nephrology outpatient department of a medical center in southern Taiwan. The nephrology medical team in this study used the SHARE five-step model of SDM to communicate with the patients about RRT and Brief Illness Perception Questionnaire (BIPQ) was applied to evaluate illness perception of these patients at the beginning of SDM. According to the SDM decision time, the study participants were classified general and delayed SDM groups. The distribution between SDM groups was estimated using independent two sample t-test, chi-squared test or Fisher's exact test. The correlation between illness perception and SDM decision time were illustrated and evaluated using Spearman's correlation test. A p-value less than 0.05 is statistically significant. RESULTS: A total of 75 patients were enrolled in this study. The average time to make a dialysis decision after initiating SDM was 166.2 ± 178.1 days. 51 patients were classified as general group, and 24 patients were classified as delayed group. The median SDM decision time of delayed group were significantly longer than general group (56 vs. 361 days, P < 0.001). Our findings revealed that delayed group was significantly characterized with not created early surgical assess (delayed vs. general: 66.7% vs. 27.5%, p = 0.001) compared to general group. The average BIPQ score was 54.0 ± 8.1 in our study. We classified the patients into high and low illness perception group according to the median score of BIPQ. The total score of BIPQ in overall participants might increase by the SDM decision time (rho = 0.83, p = 0.830) and the linear regression line also showed consistent trends between BIPQ and SDM decision time in correspond cohorts. However, no statistically significant findings were found. CONCLUSIONS: The patients with advanced chronic kidney disease took an average of five and a half months to make a RRT decision after undergoing SDM. Although there is no statistical significance, the trend of illness perception seems correlated with decision-making time. The stronger the illness perception, the longer the decision-making time. Furthermore, shorter decision times may be associated with earlier establishment of surgical access. We need more research exploring the relationship between illness perception and SDM for RRT in CKD patients.

Thickness-Dependent Dark-Bright Exciton Splitting and Phonon Bottleneck in CsPbBr3-Based Nanoplatelets Revealed via Magneto-Optical Spectroscopy.

The optimized exploitation of perovskite nanocrystals and nanoplatelets as highly efficient light sources requires a detailed understanding of the energy spacing within the exciton manifold. Dark exciton states are particularly relevant because they represent a channel that reduces radiative efficiency. Here, we apply large in-plane magnetic fields to brighten optically inactive states of CsPbBr3-based nanoplatelets for the first time. This approach allows us to access the dark states and directly determine the dark-bright splitting, which reaches 22 meV for the thinnest nanoplatelets. The splitting is significantly less for thicker nanoplatelets due to reduced exciton confinement. Additionally, the form of the magneto-PL spectrum suggests that dark and bright state populations are nonthermalized, which is indicative of a phonon bottleneck in the exciton relaxation process.

Enhanced Active Sites and Stability in Nano-MOFs for Electrochemical Energy Storage through Dual Regulation by Tannic Acid.

The limited active sites and poor acid-alkaline solution stability of metal-organic frameworks (MOFs), significantly limit their wider application. In this study, the acid property of tannic acid (TA) was used as an etchant to etch the surface-active sites. Subsequently, the further chelation of the protonated TA with the exposed metal active site can effectively protect the metal ions. Meanwhile, the TA provided a large amount of phenolic hydroxyl groups, which can greatly improve the stability of imidazolate-coordinated MOFs. The electrochemical test results indicated that the MOFs composite materials synthesized using this scheme had high specific capacitance and stability. And the mechanism of its electrochemical reaction process was explored through in situ X-ray diffraction (XRD) and theoretical calculations. In addition, the same treatment was carried out through a series of carboxyl-coordinated MOFs, which further confirmed the principle of this scheme to obtain a higher active site and stability. This paper explains the mechanism of functionalization of nano-MOFs by polyphenolic compounds, providing new ideas for the research of nano-MOFs.

Modular PET Agent Construction Strategy through Strain-Promoted Double-Click Reagent with Efficient Photoclick Step.

An efficient modular strategy for rapid assembly of positron emission tomography (PET) agents has been developed. The use of a sequential, rapid, and selective double-click reaction allows for a combinatorial approach to the cross-linking of positron emitter-bearing prosthetic groups with various ligands. The strain-promoted azide alkyne cyclization (SPAAC) coupling of 18F-labeled azide synthon with MC-DIBOD, a cyclooctadiyne with one of the triple bonds caged as a cyclopropenone moiety, produces a stable intermediate. A brief exposure of the latter to 350-420 nm light removes protection of the second triple bond allowing for the addition of an azide-tagged biomolecule. The utility of this strategy has been demonstrated by the construction of several PET agents. The value of modularity was demonstrated in the preparation of PSMA PET agents, where the hydrophilicity was easily modified to improve tumor to background contrast.

Functional insights into Brucella transcriptional regulator ArsR.

ArsR-family transcriptional factors regulates diverse physiological functions necessary for Brucella adaptation to environmental changes. However, whether the ArsR-family transcriptional regulator are related to virulence, and the precise determination of ArsR direct targets in Brucella are still unknown. Therefore, we created a 2308ΔArsR6 mutant of B. abortus 2308 (S2308). Virulence assay was performed using a murine macrophage cell line (RAW 264.7). We performed chromatin immunoprecipitation of ArsR6 followed by next-generation sequencing (ChIP-seq). We also selected the target gene pobA (BAB2_0600), and created the mutant (2308ΔpobA). The survival capability of 2308ΔpobA strain in RAW 264.7 was detected and the levels of tumor necrosis factor-α (TNF-α), interferon-gamma (IFN-γ), interleukin-12 (IL-12) and interleukin-18 (IL-18) were also measured. The results showed that 2308ΔArsR6 reduced survival capability in RAW 264.7. We detected 40 intergenic ChIP-seq peaks of ArsR6 binding distributed across the Brucella genome. 2308ΔpobA was significantly reduced survival capability in RAW 264.7. After the macrophages were infected with 2308ΔpobA, the levels of TNF-α, IFN-γ, IL-12 and IL-18 were decreased and were significantly lower than that for the S2308-infected group, indicating that the 2308ΔpobA could reduce the secretion of inflammatory cytokines. Taken together, the research provided new insights into the functionality of ArsR6 and great significance to clarify the function of ArsR6.

Organic Photocathode Supported by Copper Nanosheets Array for Overall Water Splitting.

The Z-scheme overall solar water splitting is a mimic of natural photosynthesis to convert solar energy into chemical energy. Since the energy levels of most organic semiconductors match well with the hydrogen evolution potential, they have great application prospects as photocathodes in Z-scheme photoelectrochemical systems. However, due to the weak light absorption and difficult carrier separation, the photocurrent density and onset potential of organic photocathodes are still low. To solve these problems, we introduced a copper nanosheets array (Cu NSA) framework under organic layers to increase the surface reaction sites, improve the light absorption and enhance the distribution range of built-in electric field simultaneously. As a result, the photocurrent density and onset potential of poly(3-hexylthiophene) : [6,6]-phenyl-C61 -butyric acid (P3HT : PCBM) photocathode were enhanced significantly. The onset potential increased by 50 mV to 0.65 V vs. RHE, and the photocurrent density reached -1 mA cm-2 at 0 V vs. RHE, which was 18 times that of the sample without Cu NSA. The optimized photocathode was connected with titanium dioxide nanorods array photoanode in a tandem manner to realize the spontaneous overall water splitting. Without bias and co-catalyst, the photocurrent density was maintained at 110 µA cm-2 and the solar-to-fuel conversion efficiency was 0.14 % in neutral solution. These results provide a feasible method for optimizing the performance of organic photocathodes.

High-Valent Ni Species Induced by Inactive MoO2 for Efficient Urea Oxidation Reaction.

The microenvironment tuning of Ni species, a promising non-precious catalyst, is significant in the energy and environmentally relevant urea electro-oxidation reaction (UOR). Herein, we found that the high-valent Ni species induced by the inactive MoO2 in mixed nanocrystals of NiO/MoO2 were effective for urea oxidation. The redox interaction of MoO2 and NiO revealed by the spectroscopic analysis well supported the formation of high-valent Ni species and the changes in the surface chemical state. High catalytic activity and stability for urea oxidation were observed by a series of electrochemical measures compared to the counterpart catalysts of MoO2 and NiO. The optimal NiO/MoO2 hybrid catalyst showed a UOR activity of 73.1 mA cm-2 at 1.50 V, which was about 12-fold that of the NiO catalyst. In addition, largely improved catalytic kinetics and catalytic stability for UOR were also demonstrated. Because of the inactive activity of MoO2 and the low performance of NiO, the largely improved preference can be affirmatively attributed to the efficient catalytic synergism of NiO/MoO2 in the mixed nanocrystals. The current finding clarifies the catalytic promotion effect of the inactive Mo species on Ni-based catalysts for urea oxidation, which would be instructive for Ni/Mo-relevant catalyst development.

Effect of BCG HSP70 Gene Transfection on Dendritic Cells Derived From Bone Marrow in Children With Acute Leukemia.

OBJECTIVES: In this study, immature dendritic cells (imDCs) were transfected with the Bacillé Calmette-Guérin (BCG) heat shock protein 70 (HSP70) gene to investigate the impact on the maturity and function of imDCs from the bone marrow of pediatric patients with acute leukemia. MATERIALS AND METHODS: Bone marrow mononuclear cells were isolated from pediatric patients with acute lymphoblastic leukemia who had achieved complete remission at least 6 months prior. The recombinant vector pDisplay-HSP70 was transfected into imDCs. The test groups included 5 subgroups: imDCs (imDCs without special processing), imDC-neos (imDCs transfected with the pDisplay vector), HSP70 (imDCs transfected with the pDisplay-HSP70 vector), tumor necrosis factor α (TNF-α) (imDCs induced with rhTNF-α), and HSP70+TNF-α. Mature dendritic cells (mDCs) from different groups (HSP70, TNF-α, and HSP70+TNF-α) and T cells were cultured. An equal number of lymphocytes and mDCs were used as controls. The proliferation indices of T cells and the cytokine contents (interleukin-12 and interferon-γ) were determined. RESULTS: The HSP70 group and the TNF-α group expressed higher levels of HLA-DR, CD80, and CD86 but lower levels than the HSP70+TNF-α group; there was no significant difference between the HSP70 group and the TNF-α group. The combination of HSP70 and TNF-α induced the highest levels of interleukin-12 and interferon-γ. CONCLUSIONS: The outcomes of this study indicated that gene transfection with BCG HSP70 evidently promoted imDC maturity and the antitumor effects of mDC-mediated T cells. It could serve as a candidate gene-modified cell vaccine for tumor immunotherapy.

Benchmark dose in the presence of coexposure to melamine and diethylhexyl phthalate and urinary renal injury markers in pregnant women.

Environmental exposures to mixtures of toxic chemicals have potential interaction effects that may lead to hazard index values exceeding one. However, current regulation levels, such as tolerable daily intake (TDI), are mostly based on experimental studies conducted with a single chemical compound. In this study, we assessed the relationships between melamine and di-(2-ethylhexyl) phthalate (DEHP) exposure and their coexposure with the early renal injury markers N-acetyl -D-glucosaminidase (NAG), albumin/creatinine ratio (ACR), and microalbuminuria in 1236 pregnant women. Various generalized linear models with interaction terms and Bayesian kernel machine regression models were used for the (co-)exposure response associations. We derived the benchmark dose (BMD) and the corresponding one-sided 95% confidence bound BMDL based on the estimated (covariate-adjusted) average daily intake of melamine and DEHP metabolites measured in spot urine of the women collected during the third trimester. Given a benchmark response of 0.1, the BMDL level of melamine (DEHP) exposure on NAG (ACR, microalbuminuria) was 2.67 (11.20, 4.45) µg/kg_bw/day, and it decreased to as low as 1.46 (3.83, 2.73) µg/kg_bw/day when considering coexposure to DEHP (melamine) up to the 90th percentile. Both the exposure threshold levels of melamine and DEHP for early renal injuries in pregnant women were several-fold to one order lower than the current recommended TDIs by the WHO and the US FDA and EPA and were even lower considering coexposure. Because of concurrent exposures in real-world environments, more stringent regulation levels are recommended in susceptible populations, such as pregnant women, due to potential synergistic mixture effects.

Virtual reality interventions and the outcome measures of adult patients in acute care settings undergoing surgical procedures: An integrative review.

AIMS: To evaluate the different types of virtual reality (VR) therapy received by adult patients undergoing surgical procedures in acute care settings and the outcome measures, as well as to highlight the acceptability and feasibility of VR approaches among patients and healthcare workers. DESIGN: Whittemore and Knafl's integrative review method guided the analysis. DATA SOURCES: Searches were conducted in ScienceDirect, ProQuest, Wiley Online Library, Medline, PsycINFO and PubMed and Google Scholar from 2000 to June 2021. REVIEW METHODS: A systematic search on articles published in English was carried out with electronic databases and hand search references. Keywords searched included primary qualitative and quantitative studies that utilized VR therapy in surgical care settings. RESULTS: Eighteen articles were reviewed, which reported the use of two main strategies: guided and interactive imagery therapy. The findings identified: (i) patient-clinical outcome measures including the use of analgesics, vital signs, functional capacity and length of hospital stay; and (ii) patient-reported experience measures including pain, anxiety and satisfaction level. Comfort, age, knowledge and attitude were key factors influencing the acceptability of VR among the patients, whereas cost-effectiveness and infection control were two main factors affecting the feasibility of use among the health care workers. CONCLUSION: VR therapy demonstrated potential improvements in both the patient-clinical outcomes and patient-reported experiences of those undergoing surgical procedures. However, the findings were inconsistent, which required further research to explore and establish the effectiveness of using VR in the context of acute care settings. IMPACT: VR distraction has been increasingly used as a non-pharmacological method in managing pain, easing anxiety and optimizing other associated outcomes in patients undergoing surgical procedures. It is essential to examine the effectiveness of VR therapy on the adult patients' outcomes in acute care settings with surgical procedures, as well as its acceptability and feasibility of use.

Assessment of Cultural Competence Among Nurses: The Need Of Hour.

Cultural competence and skills are the major part of professionalism a nurse should achieve to provide the best quality health care without hurting the culturally sensitive issues in all aspects. This review focused on the assessment of cultural competence and skills among nursing professionals. Assessment of these skills is very much necessary for accountability as well as improving the capability among the nurses or nursing professionals. Many tools are developed across the world including many region-specific. These tools can be employed for the self-assessment to know the self-competency and to assess the effectiveness of training programs among the professionals.

Numerical Simulation Study on Flow Laws and Heat Transfer of Gas Hydrate in the Spiral Flow Pipeline with Long Twisted Band.

The natural gas hydrate plugging problems in the mixed pipeline are becoming more and more serious. The hydrate plugging has gradually become an important problem to ensure the safety of pipeline operation. The deposition and heat transfer characteristics of natural gas hydrate particles in the spiral flow pipeline have been studied. The DPM model (discrete phase model) was used to simulate the motion of solid particles, which was used to simulate the complex spiral flow characteristics of hydrate in the pipeline with a long twisted band. The deposition and heat transfer characteristics of gas hydrate particles in the spiral flow pipeline were studied. The velocity distribution, pressure drop distribution, heat transfer characteristics, and particle settling characteristics in the pipeline were investigated. The numerical results showed that compared with the straight flow without a long twisted band, two obvious eddies are formed in the flow field with a long twisted band, and the velocities are maximum at the center of the vortices. Along the direction of the pipeline, the two vortices move toward the pipe wall from near the twisted band, which can effectively carry the hydrate particles deposited on the wall. With the same Reynolds number, the twisted rate was greater, the spiral strength was weaker, the tangential velocity was smaller, and the pressure drop was smaller. Therefore, the pressure loss can be reduced as much as possible with effect of the spiral flow. In a straight light flow, the Nusselt number is in a parabolic shape with the opening downwards. At the center of the pipe, the Nusselt number gradually decreased toward the pipe wall at the maximum, and at the near wall, the attenuation gradient of the Nu number was large. For spiral flow, the curve presented by the Nusselt number was a trough at the center of the pipe and a peak at 1/2 of the pipe diameter. With the reduction of twist rate, the Nusselt number becomes larger. Therefore, the spiral flow can make the temperature distribution more even and prevent the large temperature difference, resulting in the mass formation of hydrate particles in the pipeline wall. Spiral flow has a good carrying effect. Under the same condition, the spiral flow carried hydrate particles at a distance about 3-4 times farther than that of the straight flow.

Numerical Simulation of Swirl Flow Characteristics of CO2 Hydrate Slurry by Short Twisted Band.

The development of oil and gas resources is gradually transferring to the deep sea, and the hydrate plugging of submarine pipelines at high pressures and low temperatures is becoming an important problem to ensure the safety of pipeline operations. The swirl flow is a new method to expand the boundary of hydrate safe flow. Numerical simulation of the hydrate slurry flow characteristics in a horizontal pipeline by twisted band has been carried out, and the flow of CO2 hydrate slurry in low concentration has been simulated by the RSM and DPM models. The results show that the heat transfer efficiency is also related to Re and particle concentration. The velocity distribution has the form of symmetrical double peaks, and the peaks finally merge at the center of the pipeline. Vortexes firstly appear on both sides of the edge of the twisted band, and then move to the middle part of the twisted band. Finally, the vortex center almost coincides with the velocity center. The rotation direction of hydrate particles is the same as the twisted direction of the twisted band, twist rate (Y) is smaller, Re is larger, and the symmetric vortex lines merge farther away. The initial swirl number is mainly related to Y, but not Re. The swirl flow attenuates exponentially, and its attenuation rate is mainly related to Re, but not Y. Compared with ordinary pipelines, the swirl flow can obviously improve the transportation distance of hydrate slurry.