Functionalization of Tetraphosphido Ligands by Heterocumulenes.

Although numerous polyphosphido complexes have been accessed through the transition-metal-mediated activation and functionalization of white phosphorus (P4), the selective functionalization of the resulting polyphosphorus ligands in these compounds remains underdeveloped. In this study, we explore the reactions between cyclotetraphosphido cobalt complexes and heterocumulenes, leading to functionalized P4 ligands. Specifically, the reaction of carbon disulfide (CS2) with [K(18c-6)][(Ar*BIAN)Co(η4-P4)] ([K(18c-6)]1, 18c-6 = [18]crown-6) affords the adduct [K(18c-6)][(Ar*BIAN)Co(η3:η1-P4CS2)] ([K(18c-6)]3), in which CS2 is attached to a single phosphorus atom (Ar* = 2,6-dibenzhydryl-4-isopropylphenyl, BIAN = 1,2-bis(arylimino)acenaphthene diimine). In contrast, the insertion of bis(trimethylsilyl)sulfur diimide S(NSiMe3)2 into a P-P bond of [K(18c-6)]1 yields [K(18c-6)][(Ar*BIAN)Co(η3:η1-P4SN2(SiMe3)2)] (K(18c-6)]4). This salt further reacts with Me3SiCl to form [(Ar*BIAN)Co(η3:η1-P4SN2(SiMe3)3] (5), featuring a rare azatetraphosphole ligand. Moreover, treatment of the previously reported complex [(Ar*BIAN)Co(η3:η1-P4C(O)tBu)] (2) with isothiocyanates results in P-C bond insertion, yielding [(Ar*BIAN)Co(η3:η1-P4C(S)N(R)C(O)tBu)] (6a,b; R = Cy, Ph).

Cobalt-Mediated [3+1] Fragmentation of White Phosphorus: Access to Acylcyanophosphanides.

Despite the accessibility of numerous transition metal polyphosphido complexes through transition-metal-mediated activation of white phosphorus, the targeted functionalization of Pn ligands to obtain functional monophosphorus species remains challenging. In this study, we introduce a new [3+1] fragmentation procedure for cyclo-P4 ligands, leading to the discovery of acylcyanophosphanides and -phosphines. Treatment of the complex [K(18c-6)][(Ar*BIAN)Co(η4 -P4 )] ([K(18c-6)]3, 18c-6=[18]crown-6, Ar*=2,6-dibenzhydryl-4-isopropylphenyl, BIAN=1,2-bis(arylimino)acenaphthene diimine) with acyl chlorides results in the formation of acylated tetraphosphido complexes [(Ar*BIAN)Co(η4 -P4 C(O)R)] (R=tBu, Cy, 1-Ad, Ph; 4 a-d). Subsequent reactions of 4 a-d with cyanide salts yield acylated cyanophosphanides [RC(O)PCN]- (9 a-d- ) and the cyclo-P3 cobaltate anion [(Ar*BIAN)Co(η3 -P3 )(CN)]- (8- ). Further reactions of 4 a-d with trimethylsilyl cyanide (Me3 SiCN) and isocyanides provide insight into a plausible mechanism of this [3+1] fragmentation reaction, as these reagents partially displace the P4 C(O)R ligand from the cobalt center. Several potential intermediates of the [3+1] fragmentation were characterized. Additionally, the introduction of a second acyl substituent was achieved by treating [K(18c-6)]9b with CyC(O)Cl, resulting in the first bis(acyl)monocyanophosphine (CyC(O))2 PCN (10).

Cationic Phosphinidene as a Versatile P1 Building Block: [LC-P]+ Transfer from Phosphonio-Phosphanides [LC-P-PR3]+ and Subsequent LC Replacement Reactions (LC = N-Heterocyclic Carbene).

Cationic imidazoliumyl(phosphonio)-phosphanides [LC-P-PR3]+ (1a-e+, LC = 4,5-dimethyl-1,3-diisopropylimidazolium-2-yl; R = alkyl, aryl) are obtained via the nucleophilic fragmentation of tetracationic tetraphosphetane [(LC-P)4][OTf]4 (2[OTf]4) with tertiary phosphanes. They act as [LC-P]+ transfer reagents in phospha-Wittig-type reactions, when converted with various thiocarbonyls, giving unprecedented cationic phosphaalkenes [LC-P═CR2]+ (5a-f[OTf]) or phosphanides [LC-P-CR(NR2')]+ (6a-d[OTf]). Theoretical calculations suggest that three-membered cyclic thiophosphiranes are crucial intermediates of this reaction. To test this hypothesis, treatment of [LC-P-PPh3]+ with phosphaalkenes, that are isolobal to thioketones, permits the isolation of diphosphirane salts 11a,b[OTf]. Furthermore, preliminary studies suggest that the cationic phosphaalkene [LC-P═CPh2]+ may be employed to access rare examples of η2-P═C π-complexes with Pd0 and Pt0 when treated with [Pd(PPh3)4] and [Pt(PPh3)3] for which analogous complexes of neutral phosphaalkenes are scarce. The versatility of [LC-P]+ as a valuable P1 building block was showcased in substitution reactions of the transferred LC-substituent using nucleophiles. This is demonstrated through the reactions of 5a[OTf] and 6c[OTf] with Grignard reagents and KNPh2, providing a convenient, high-yielding access to MesP═CPh2 (16) and otherwise difficult-to-synthesize 1,3-diphosphetane 17 and P-aminophosphaalkenes.

Formation of a Hexaphosphido Cobalt Complex through P-P Condensation.

The reaction between diphosphorus derivatives [(Cl ImDipp )P2 (Dipp)]OTf (1[OTf]) and [(Cl ImDipp )P2 (Dipp)Cl] (1[Cl]) with the cyclotetraphosphido cobalt complex [K(18c-6)][(PHDI)Co(η4 -cyclo-P4 )] (2) leads to the formation of complex [(PHDI)Co{η4 -cyclo-P6 (Dipp)(Cl ImDipp )}] (3), which features an unusual hexaphosphido ligand [Cl ImDipp =4,5-dichloro-1,3-bis(2,6-diisopropylphenyl)imidazol-2-yl, Dipp=2,6-diisopropylphenyl, 18c-6=18-crown-6, PHDI=bis(2,6-diisopropylphenyl)phenanthrene-9,10-diimine]. Complex 3 was obtained as a crystalline material with a moderate yield at low temperature. Upon exposure to ambient temperature, compound 3 slowly transforms into two other compounds, [K(18c-6)][(PHDI)Co(η4 -P7 Dipp)] (4) and [(PHDI)Co{cyclo-P5 (Cl ImDipp )}] (5). The novel complexes 3-5 were characterized using multinuclear NMR spectroscopy and single-crystal X-ray diffraction. To shed light on the formation of these compounds, a proposed mechanism based on 31 P NMR monitoring studies is presented.

Highly Tunable 4-Phosphoryl Pyrazolone Receptors for Selective Rare-Earth Separation.

Highly selective rare-earth separation has become increasingly important due to the indispensable role of these elements in various cutting-edge technologies including clean energy. However, the similar physicochemical properties of rare-earth elements (REEs) render their separation very challenging, and the development of new selective receptors for these elements is potentially of very considerable economic and environmental importance. Herein, we report the development of a series of 4-phosphoryl pyrazolone receptors for the selective separation of trivalent lanthanum, europium, and ytterbium as the representatives of light, middle, and heavy REEs, respectively. X-ray crystallography studies were employed to obtain solid-state structures across 11 of the resulting complexes, allowing comparative structure-function relationships to be probed, including the effect of lanthanide contraction that occurs along the series from lanthanum to europium to ytterbium and which potentially provides a basis for REE ion separation. In addition, the influence of ligand structure and lipophilicity on lanthanide binding and selectivity was systematically investigated via n-octanol/water distribution and liquid-liquid extraction (LLE) studies. Corresponding stoichiometry relationships between solid and solution states were well established using slope analyses. The results provide new insights into some fundamental lanthanide coordination chemistry from a separation perspective and establish 4-phosphoryl pyrazolone derivatives as potential practical extraction reagents for the selective separation of REEs in the future.

Selective Separation of Lithium, Magnesium and Calcium using 4-Phosphoryl Pyrazolones as pH-Regulated Receptors.

Ensuring continuous and sustainable lithium supply requires the development of highly efficient separation processes such as LLE (liquid-liquid extraction) for both primary sources and certain waste streams. In this work, 4-phosphoryl pyrazolones are used in an efficient pH-controlled stepwise separation of Li+ from Ca2+ , Mg2+ , Na+ and K+ . The factors affecting LLE process, such as the substitution pattern of the extractant, diluent/water distribution, co-ligand, pH, and speciation of the metal complexes involved, were systematically investigated. The maximum extraction efficiency of Li+ at pH 6.0 was 94 % when Mg2+ and Ca2+ were previously separated at pH<5.0, proving that the separation of these ions is possible by simply modulating the pH of the aqueous phase. Our study points a way to separation of lithium from acid brine or from spent lithium ion battery leaching solutions, which supports the future supply of lithium in a more environmentally friendly and sustainable manner.

Visible-Light-Triggered Photoswitching of Diphosphene Complexes.

Although diphosphene transition metal complexes are known to undergo E to Z isomerization upon irradiation with UV light, their potential for photoswitching has remained poorly explored. In this study, we present diphosphene complexes capable of reversible photoisomerizations through haptotropic rearrangements. The compounds [(2-κ2 P,κ6 C)Mo(CO)2 ][OTf] (3 a[OTf]), [(2-κ2 P,κ6 C)Fe(CO)][OTf] (3 b[OTf]), and [(2-κ2 P)Fe(CO)4 ][OTf] (4[OTf]) were prepared using the triflate salt [(LC )P=P(Dipp)][OTf] (2[OTf) as a precursor (LC =4,5-dichloro-1,3-bis(2,6-diisiopropylphenyl)-imidazolin-2-yl; Dipp=2,6-diisiopropylphenyl, OTf=triflate). Upon exposure to blue or UV light (λ=400 nm, 470 nm), the initially red-colored η2 -diphosphene complexes 3 a,b[OTf] readily undergo isomerization to form blue-colored η1 -complexes [(2-κ1 P,κ6 C)M(CO)n ][OTf] (5 a,b[OTf]; a: M=Mo, n=2; b: M=Fe, n=1). This haptotropic rearrangement is reversible, and the (κ2 P,κ6 C)-coordination mode gradually reverts back upon dissolution in coordinating solvents or more rapidly upon exposure to yellow or red irradiation (λ=590 nm, 630 nm). The electronic reasons for the reversible visible-light-induced photoswitching observed for 3 a,b[OTf] are elucidated by DFT calculations. These calculations indicate that the photochromic isomerization originates from the S1 excited state and proceeds through a conical intersection.

4-Phosphoryl Pyrazolones for Highly Selective Lithium Separation from Alkali Metal Ions.

Effective receptors for the separation of Li+ from a mixture with other alkali metal ions under mild conditions remains an important challenge that could benefit from new approaches. In this study, it is demonstrated that the 4-phosphoryl pyrazolones, HL2 -HL4 , in the presence of the typical industrial organophosphorus co-ligands tributylphosphine oxide (TBPO), tributylphosphate (TBP) and trioctylphosphine oxide (TOPO), are able to selectively recognise and extract lithium ions from aqueous solution. Structural investigations in solution as well as in the solid state reveal the existence of a series of multinuclear Li+ complexes that include dimers (TBPO, TBP) as well as rarely observed trimers (TOPO) and represent the first clear evidence for the synergistic role of the co-ligands in the extraction process. Our findings are supported by detailed NMR, MS and extraction studies. Liquid-liquid extraction in the presence of TOPO revealed an unprecedented high Li+ extraction efficiency (78 %) for HL4 compared to the use of the industrially employed acylpyrazolone HL1 (15 %) and benzoyl-1,1,1-trifluoroacetone (52 %) extractants. In addition, a high selectivity for Li+ over Na+ , K+ and Cs+ under mild conditions (pH ∼8.2) confirms that HL2 -HL4 represent a new class of ligands that are very effective extractants for use in lithium separation.

One-pot synthesis of brewer's spent grain-supported superabsorbent polymer for highly efficient uranium adsorption from wastewater.

High-efficient and fast adsorption of uranium is important to reduce the hazards caused by the uranium contamination of water environment due to the increased human activities. Herein, brewer's spent grain (BSG)-supported superabsorbent polymers (SAP) with different cross-linking densities are prepared as cheap and eco-friendly adsorbents for the first time via one-pot swelling and graft polymerization. A 7 wt% NaOH solution is used to swell BSG before grafting and subsequently neutralize the acrylic acid to control the reaction rate without producing alkaline wastewater. Compared with the traditional methods, swelling improves the grafting density and the utilization of raw materials due to the increased disorder degree of the BSG fibers. This results in the grafting of abundant carboxyl and amide groups onto the BSG backbone, forming a strongly hydrophilic polymer network of the BSG-SAP. Compared with the reference polymers without BSG, BSG-SAP presents higher adsorption capacity and enhanced reusability. The highly cross-linked BSG-SAP (BSG-SAP-H) shows an outstanding adsorption capacity of U(VI) (1465 mg/g at pH0 = 4.6), a fast adsorption rate (81% of equilibrium adsorption capacity in 15 min), and a high selectivity in the presence of competing ions. Adsorption mechanism studies reveal the involvement of amide groups, a bidentate binding structure between UO22+ and the carboxyl groups, and a cation exchange between Na+ and UO22+. More importantly, the adsorption capacity of BSG-SAP-H reaches 254.4 mg/g in the fixed-bed column experiment at a low initial concentration (c0(U) = 30 mg/L) and keeps 80% of the adsorption capacity after four cycles, indicating a great potential for uranium removal from wastewater. This work shows a suitable approach to explore the untreated biomass to prepare SAP with enhanced adsorption performance via a general and low-cost strategy.

Spatiotemporal Control of Supramolecular Polymerization and Gelation of Metal-Organic Polyhedra.

In coordination-based supramolecular materials such as metallogels, simultaneous temporal and spatial control of their assembly remains challenging. Here, we demonstrate that the combination of light with acids as stimuli allows for the spatiotemporal control over the architectures, mechanical properties, and shape of porous soft materials based on metal-organic polyhedra (MOPs). First, we show that the formation of a colloidal gel network from a preformed kinetically trapped MOP solution can be triggered upon addition of trifluoroacetic acid (TFA) and that acid concentration determines the reaction kinetics. As determined by time-resolved dynamic light scattering, UV-vis absorption, and 1H NMR spectroscopies and rheology measurements, the consequences of the increase in acid concentration are (i) an increase in the cross-linking between MOPs; (ii) a growth in the size of the colloidal particles forming the gel network; (iii) an increase in the density of the colloidal network; and (iv) a decrease in the ductility and stiffness of the resulting gel. We then demonstrate that irradiation of a dispersed photoacid generator, pyranine, allows the spatiotemporal control of the gel formation by locally triggering the self-assembly process. Using this methodology, we show that the gel can be patterned into a desired shape. Such precise positioning of the assembled structures, combined with the stable and permanent porosity of MOPs, could allow their integration into devices for applications such as sensing, separation, catalysis, or drug release.

Saccharified Uranyl Ions: Self-Assembly of UO2 2+ into Trinuclear Anionic Complexes by the Coordination of Glucosamine-Derived Schiff Bases.

The reaction of UO2 (OAc)2 ⋅ 2H2 O with the biologically inspired ligand 2-salicylidene glucosamine (H2 L1 ) results in the formation of the anionic trinuclear uranyl complex [(UO2 )3 (µ3 -O)(L1 )3 ]2- (12- ), which was isolated in good yield as its Cs-salt, [Cs]2 1. Recrystallization of [Cs]2 1 in the presence of 18-crown-6 led to formation of a neutral ion pair of type [M(18-crown-6)]2 1, which was also obtained for the alkali metal ions Rb+ and K+ (M=Cs, Rb, K). The related ligand, 2-(2-hydroxy-1-naphthylidene) glucosamine (H2 L2 ) in a similar procedure with Cs+ gave the corresponding complex [Cs(18-crown-6)]2 [(UO2 )3 (µ3 -O)(L2 )3 ([Cs(18-crown-6)]2 2). From X-ray investigations, the [(UO2 )3 O(Ln )3 ]2- anion (n=1, 2) in each complex is a discrete trinuclear uranyl species that coordinates to the alkali metal ion via three uranyl oxygen atoms. The coordination behavior of H2 L1 and H2 L2 towards UO2 2+ was investigated by NMR, UV/Vis spectroscopy and mass spectrometry, revealing the in situ formation of the 12- and 22- dianions in solution.

Polymorphic Phosphorescence from Separable Aggregates with Unique Photophysical Properties.

Platinum complexes aggregate into polymorphs with different intermolecular interactions leading to different photophysical properties. Strong intermolecular interactions stabilize the aggregate to such an extent that the polymorphs can be separated directly by column chromatography. Solid-state structures as well as quantum-chemical calculations confirmed the effect of the interactions on the photophysical properties.

Bifunctional Fluorophosphonium Triflates as Intramolecular Frustrated Lewis Pairs: Reversible CO2 Sequestration and Binding of Carbonyls, Nitriles and Acetylenes.

Electrophilic fluorophosphonium triflates bearing pyridyl (3[OTf]) or imidazolyl (4[OTf])-substituents act as intramolecular frustrated Lewis pairs (FLPs) and reversibly form 1 : 1 adducts with CO2 (5+ and 6+ ). An unusual and labile spirocyclic tetrahedral intermediate (72+ ) is observed in CO2 -pressurized (0.5-2.0 bar) solutions of cation 4+ at low temperatures, as demonstrated by variable-temperature NMR studies, which were confirmed crystallographically. In addition, cations 3+ and 4+ actively bind carbonyls, nitriles and acetylenes by 1,3-dipolar cycloaddition, as shown by selected examples.

Manipulating Estrogenic/Anti-Estrogenic Activity of Triphenylethylenes towards Development of Novel Anti-Neoplastic SERMs.

Selective estrogen receptor modulators (SERMs) act as estrogen receptor (ERα) agonists or antagonists depending on the target issue. Tamoxifen (TAM) (a non-steroidal triphenylethylene derivative) was the first SERM approved as anti-estrogen for the treatment of metastatic breast cancer. On the hunt for novel SERMs with potential growth inhibitory activity on breast cancer cell lines yet no potential to induce endometrial carcinoma, we designed and synthesized 28 novel TAM analogs. The novel analogs bear a triphenylethylene scaffold. Modifications on rings A, B, and C aim to attenuate estrogenic/anti-estrogenic activities of the novel compounds so they can potentially inhibit breast cancer and provide positive, beneficial estrogenic effects on other tissues with no risk of developing endometrial hyperplasia. Compound 12 (E/Z-1-(2-{4-[1-(4-Chloro-phenyl)-2-(4-methoxy-phenyl)-propenyl]-phenoxy}-ethyl)-piperidine) showed an appreciable relative ERα agonistic activity in a yeast estrogen screen (YES) assay. It successfully inhibited the growth of the MCF-7 cell line with GI50 = 0.6 µM, and it was approximately three times more potent than TAM. It showed no potential estrogenicity on Ishikawa endometrial adenocarcinoma cell line via assaying alkaline phosphatase (AlkP) activity. Compound 12 was tested in vivo to assess its estrogenic properties in an uterotrophic assay in an ovariectomized rat model. Compared to TAM, it induced less increase in wet uterine wet weight and showed no uterotrophic effect. Compound 12 is a promising candidate for further development due to its inhibition activity on MCF-7 proliferation with moderate AlkP activity and no potential uterotrophic effects. The in vitro estrogenic activity encourages further investigations toward potential beneficial properties in cardiovascular, bone, and brain tissues.

One-Pot Synthesis of Boron-Doped Polycyclic Aromatic Hydrocarbons via 1,4-Boron Migration.

Herein, we demonstrate a novel one-pot synthetic method towards a series of boron-doped polycyclic aromatic hydrocarbons (B-PAHs, 1 a-1 o), including hitherto unknown B-doped zethrene derivatives, from ortho-aryl substituted diarylalkynes with high atom efficiency and broad substrate scopes. A reaction mechanism is proposed based on the experimental investigation together with the theoretical calculations, which involves a unique 1,4-boron migration process. The resultant benchtop-stable B-PAHs are thoroughly investigated by X-ray crystallography, cyclic voltammetry, UV/Vis absorption, and fluorescence spectroscopies. The blue and green organic light-emitting diode (OLED) devices based on 1 f and 1 k are further fabricated, demonstrating the promising application potential of B-PAHs in organic optoelectronics.

A Curved Graphene Nanoribbon with Multi-Edge Structure and High Intrinsic Charge Carrier Mobility.

Structurally well-defined graphene nanoribbons (GNRs) have emerged as highly promising materials for the next-generation nanoelectronics. The electronic properties of GNRs critically depend on their edge topologies. Here, we demonstrate the efficient synthesis of a curved GNR (cGNR) with a combined cove, zigzag, and armchair edge structure, through bottom-up synthesis. The curvature of the cGNR is elucidated by the corresponding model compounds tetrabenzo[a,cd,j,lm]perylene (1) and diphenanthrene-fused tetrabenzo[a,cd,j,lm]perylene (2), the structures of which are unambiguously confirmed by the X-ray single-crystal analysis. The resultant multi-edged cGNR exhibits a well-resolved absorption at the near-infrared (NIR) region with a maximum peak at 850 nm, corresponding to a narrow optical energy gap of ∼1.22 eV. Employing THz spectroscopy, we disclose a long scattering time of ∼60 fs, corresponding to a record intrinsic charge carrier mobility of ∼600 cm2 V-1 s-1 for photogenerated charge carriers in cGNR.

Coordination Chemistry and Methylation of Mixed-Substituted Tetraphosphetanes (RP-PtBu)2 (R=Ph, Py).

Invited for the cover of this issue is the group of Jan J. Weigand at Technische Universität Dresden. The image depicts a puzzle illustrating the coinage metal cations and the methyl group, from which the three-dimensional structure of a multiply methylated tetraphosphetane arises. Read the full text of the article at 10.1002/chem.202001360.

Coordination Chemistry and Methylation of Mixed-Substituted Tetraphosphetanes (RP-PtBu)2 (R=Ph, Py).

Synthesis of mixed-substituted tetraphosphetanes (RP-PtBu)2 (R=Ph (4), Py (5); Py=2-pyridyl) is achieved from the condensation of dipyrazolylphosphanes RPpyr2 (R=Py (1), Ph (3); pyr=3,5-dimethylpyrazolyl) as P1 -building block (R-P) and tBuPH2 in an equimolar ratio. Compound 5 is of special interest since the presence of two pyridyl-substituents as well as the P4 -core allows for a rich coordination chemistry with coinage metal salts [Cu(MeCN)4 ][OTf], Ag[OTf] and in situ formed [Au(tht)][OTf] (tht=tetrahydrothiophene). Both tetraphosphetanes undergo alkylation reaction with MeOTf to give a series of tetraphosphetanium and tetraphosphetanediium triflate salts with additional methylation of the pyridyl-moiety in case of 5 resulting in interesting novel cyclic trications. Harsh reaction condition and an excess of MeOTf converts 5 into the cyclic trication [-P(Me Py)PMe2 P(Me Py)PtBu-]3+ (133+ ; Me Py=1-methylpyridiniumyl) through the elimination of isobutene. This salt undergoes a complicated rearrangement reaction involving a P-P/P-P bond metathesis to form trication [-P(MePy)3 PtBu-]3+ (173+ ) when reacted with Me2 PPMe2 .

Toward N,P-Doped π-Extended PAHs: A One-Pot Synthesis to Diannulated 1,4,2-Diazaphospholium Triflate Salts.

A novel method for the one-pot synthesis of diannulated 1,4,2-diazaphospholium triflate salts by a Me3SiOTf-mediated self-condensation of dichlorophosphaneyl aza-(poly)cyclic aromatic hydrocarbons (aza-(P)AHs; namely, pyridine, quinoline, phenanthridine, and benzo[d]thiazole) is reported. The diannulated 1,4,2-diazaphospholium triflate salts are characterized by multinuclear NMR spectroscopy, X-ray analysis, as well as their calculated NICS values, underlining their aromatic character. Quantum mechanical calculations shed light on the intermolecular reaction mechanism. Follow up chemistry, such as the halogenation reaction with XeF2 or SO2Cl2 with the dipyridinium derivative selectively yields the respective dihalo-σ4,λ5- and tetrahalo-σ5,λ6-diazaphospholium triflate salts. The dihalo-σ4,λ5-diazaphospholium triflate salt serves well as a surrogate for the introduction of the cationic 2-(1,2'-bipyridin)-1-iumyl ligand (1,2'-bipyl), the monocationic structural isomer of the prototypical 2,2'-bipyridine ligand (2,2'-bipy).

P-P Condensation and P-N/P-P Bond Metathesis: Facile Synthesis of Cationic Tri- and Tetraphosphanes.

[LC R P((PhP)2 C2 H4 )][OTf] (4 a,b[OTf]) and [LC iPr P(PPh2 )2 ][OTf] (5 b[OTf]) were prepared from the reaction of imidazoliumyl-substituted dipyrazolylphosphane triflate salts [LC R P(pyr)2 ][OTf] (3 a,b[OTf]; a: R=Me, b=iPr; LC R =1,3-dialkyl-4,5-dimethylimidazol-2-yl; pyr=3,5-dimethylpyrazol-1-yl) with the secondary phosphanes PhP(H)C2 H4 P(H)Ph) and Ph2 PH. A stepwise double P-N/P-P bond metathesis to catena-tetraphosphane-2,3-diium triflate salt [(Ph2 P)2 (LC Me P)2 ][OTf]2 (7 a[OTf]2 ) is observed when reacting 3 a[OTf] with diphosphane P2 Ph4 . The coordination ability of 5 b[OTf] was probed with selected coinage metal salts [Cu(CH3 CN)4 ]OTf, AgOTf and AuCl(tht) (tht=tetrahydrothiophene). For AuCl(tht), the helical complex [{(Ph2 PPLC iPr )Au}4 ][OTf]4 (9[OTf]4 ) was unexpectedly formed as a result of a chloride-induced P-P bond cleavage. The weakly coordinating triflate anion enables the formation of the expected copper(I) and silver(I) complexes [(5 b)M(CH3 CN)3 ][OTf]2 (M=Cu, Ag) (10[OTf]2 , 11[OTf]2 ).