Enhanced Solar Fuel Production over In2 O3 @Co2 VO4 Hierarchical Nanofibers with S-Scheme Charge Separation Mechanism.

The conversion of CO2 into valuable solar fuels via photocatalysis is a promising strategy for addressing energy shortages and environmental crises. Here, novel In2 O3 @Co2 VO4 hierarchical heterostructures are fabricated by in situ growing Co2 VO4 nanorods onto In2 O3 nanofibers. First-principle calculations and X-ray photoelectron spectroscopy (XPS) measurements reveal the electron transfer between In2 O3 and Co2 VO4 driven by the difference in work functions, thus creating an interfacial electric field and bending the bands at the interfaces. In this case, the photogenerated electrons in In2 O3 transport to Co2 VO4 and recombine with its holes, indicating the formation of In2 O3 @Co2 VO4 S-scheme heterojunctions and resulting in effective separation of charge carriers, as confirmed by in situ irradiation XPS. The unique S-scheme mechanism, along with the enhanced optical absorption and the lower Gibbs free energy change for the production of * CHO, significantly contributes to the efficient CO2 photoreduction into CO and CH4 in the absence of any molecule cocatalyst or scavenger. Density functional theory simulation and in situ diffuse reflectance infrared Fourier transform spectroscopy are employed to elucidate the reaction mechanism in detail.

Hybrid Acid/Base Electrolytic Cell for Hydrogen Generation and Methanol Conversion Implemented by Bifunctional Ni/MoN Nanorod Electrocatalyst.

Combining the methanol oxidation reaction (MOR) and hydrogen evolution reaction (HER) within an integrated electrolytic system may offer the advantages of enhanced kinetics of the anode, reduced energy consumption, and the production of high-purity hydrogen. Herein, it is reported the construction of Ni─MoN nanorod arrays supported on a nickel foam substrate (Ni─MoN/NF) as a bifunctional electrocatalyst for electrocatalytic hydrogen production and selective methanol oxidation to formate. Remarkably, The optimal Ni─MoN/NF catalyst displays exceptional HER performance with an overpotential of only 49 mV to attain 10 mA cm-2 in acid, and exhibits a high activity for MOR to achieve 100 mA cm-2 at 1.48 V in alkali. A hybrid acid/base electrolytic cell with Ni─MoN/NF electrode as anode and cathode is further developed for an integrated HER-MOR cell, which only requires a voltage of 0.56 V at 10 mA cm-2 , significantly lower than that of the HER-OER system (0.70 V). The density functional theory studies reveal that the incorporation of Ni effectively modulates the electronic structure of MoN, thereby resulting in enhanced catalytic activity. The unique combination of high electrocatalytic activity and excellent stability make the Ni─MoN/NF catalyst a promising candidate for practical applications in electrocatalytic hydrogen production and methanol oxidation.

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery.

The exploration of electrocatalysts toward oxygen reduction reaction (ORR) is pivotal in the development of diverse batteries and fuel cells that rely on ORR. Here, a FeCo-N-C electrocatalyst (FeCo-HNC) featuring with atomically dispersed dual metal sites (Fe-Co) and hollow cubic structure is reported, which exhibits high activity for electrocatalysis of ORR in alkaline electrolyte, as evidenced by a half-wave potential of 0.907 V, outperforming that of the commercial Pt/C catalyst. The practicality of such FeCo-HNC catalyst is demonstrated by integrating it as the cathode catalyst into an alkaline aluminum-air battery (AAB) paring with an aluminum plate serving as the anode. This AAB demonstrates an unprecedented power density of 804 mW cm-2 in ambient air and an impressive 1200 mW cm-2 in an oxygen-rich environment. These results not only establish a new benchmark but also set a groundbreaking record for the highest power density among all AABs reported to date. Moreover, they stand shoulder to shoulder with state-of-the-art H2-O2 fuel cells. This AAB exhibits robust stability with continuous operation for an impressive 200 h. This groundbreaking achievement underscores the immense potential and forward strides that the present work brings to the field.

Disorder Over Pore Size: Boosting Supercapacitor Efficiency.

The urgent need for efficient energy storage systems has spotlighted supercapacitors and nanostructured porous carbon materials, which require structural optimization to enhance their performance and lifespan, necessitating advanced design and synthesis techniques. Recent research by Forse et al. published in Science reveals that structural disorder in nanoporous carbon materials significantly enhances their capacitance performance, suggesting that optimizing structural disorder is key to developing high-energy-density supercapacitors. This study innovatively shows that structural disorder in nanoporous carbon materials significantly enhances capacitance performance, surpassing traditional factors like pore size and surface area. The investigation of multiple nanoporous carbons from a range of different suppliers showcases the generalizability of the findings. Annealing treatment further confirms that the capacitance enhancement is due to structural disorder. This discovery guides the design and synthesis of new efficient electrode materials, providing a new direction for the future development of supercapacitors.

Controllable Electrochemical Liberation of Hydrogen from Sodium Borohydride.

Sodium borohydride (NaBH4 ) has earned recognition as a promising hydrogen carrier, attributed to its exceptional hydrogen storage capacity, boasting a high theoretical storage capacity of 10.8 wt %. Nonetheless, the utilization of traditional pyrolysis and hydrolysis methods still presents a formidable challenge in achieving controlled hydrogen generation especially under ambient conditions. In this work, we report an innovative electrochemical strategy for production H2 by coupling NaBH4 electrooxidation reaction (BOR) at anode in alkaline media with hydrogen evolution reaction (HER) at cathode in acidic media. To implement this, we have developed a bifunctional electrocatalyst denoted as Pd-Mo2 C@CNTs, wherein Pd nanoparticles are grown in situ on Mo2 C embedded within N-doped carbon nanotubes. This electrocatalyst demonstrates exceptional performance in catalyzing both alkaline BOR and acidic HER. We have developed a hybrid acid/alkali cell, utilizing Pd/Mo2 C@CNTs as the anode and cathode electrocatalysts. This configuration showcases remarkable capabilities for self-sustained, precise, and uninterrupted indirect release of H2 stored in NaBH4 , even at high current densities of 100 mA cm-2 with a Faraday efficiency approaching 100 %. Additionally, this electrochemical device exhibits significant promise as a fuel cell, with the ability to deliver a maximum power density of 20 mW cm-2 .

Electron-Efficient Co-electrosynthesis of Formates from CO2 and Methanol Feedstocks.

The electrochemical conversion of CO2 into valuable chemicals using renewable electricity shows significant promise for achieving carbon neutrality and providing alternative energy storage solutions. However, its practical application still faces significant challenges, including high energy consumption, poor selectivity, and limited stability. Here, we propose a hybrid acid/alkali electrolyzer that couples the acidic CO2 reduction reaction (CO2RR) at the cathode with alkaline methanol oxidation reaction (MOR) at the anode. This dual electro-synthesis cell is implemented by developing Bi nanosheets as cathode catalysts and oxide-decorated Cu2Se nanoflowers as anode catalysts, enabling high-efficiency electron utilization for formate production with over 180% coulombic efficiency and more than 90% selectivity for both CO2RR and MOR conversion. The hybrid acid/alkali CO2RR-MOR cell also demonstrates long-term stability exceeding 100 hours of continuous operation, delivers a formate partial current density of 130 mA cm-2 at a voltage of only 2.1 V, and significantly reduces electricity consumption compared to the traditional CO2 electrolysis system. This study illuminates an innovative electron-efficiency and energy-saving techniques for CO2 electrolysis, as well as the development of highly efficient electrocatalysts.

Energy-Efficient Co-production of Benzoquinone and H2 Using Waste Phenol in a Hybrid Alkali/Acid Flow Cell.

In both the manufacturing and chemical industries, benzoquinone is a crucial chemical product. A perfect and economical method for making benzoquinone is the electrochemical oxidation of phenol, thanks to the traditional thermal catalytic oxidation of phenol process requires high cost, serious pollution and harsh reaction conditions. Here, a unique heterostructure electrocatalyst on nickel foam (NF) consisting of nickel sulfide and nickel oxide (Ni9S8-Ni15O16/NF) was produced, and this catalyst exhibited a low overpotential (1.35 V vs. RHE) and prominent selectivity (99 %) for electrochemical phenol oxidation reaction (EOP). Ni9S8-Ni15O16/NF is beneficial for lowering the reaction energy barrier and boosting reactivity in the EOP process according to density functional theory (DFT) calculations. Additionally, an alkali/acid hybrid flow cell was successfully established by connecting Ni9S8-Ni15O16/NF and commercial RuIr/Ti in series to catalyze phenol oxidation in an alkaline medium and hydrogen evolution in an acid medium, respectively. A cell voltage of only 0.60 V was applied to produce a current density of 10 mA cm-2. Meanwhile, the system continued to operate at 0.90 V for 12 days, showing remarkable long-term stability. The unique configuration of the acid-base hybrid flow cell electrolyzer provides valuable guidance for the efficient and environmentally friendly electrooxidation of phenol to benzoquinone.

Resolving the Origins of Superior Cycling Performance of Antimony Anode in Sodium-ion Batteries: A Comparison with Lithium-ion Batteries.

Alloying-type antimony (Sb) with high theoretical capacity is a promising anode candidate for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Given the larger radius of Na+ (1.02 Å) than Li+ (0.76 Å), it was generally believed that the Sb anode would experience even worse capacity degradation in SIBs due to more substantial volumetric variations during cycling when compared to LIBs. However, the Sb anode in SIBs unexpectedly exhibited both better electrochemical and structural stability than in LIBs, and the mechanistic reasons that underlie this performance discrepancy remain undiscovered. Here, using substantial in situ transmission electron microscopy, X-ray diffraction, and Raman techniques complemented by theoretical simulations, we explicitly reveal that compared to the lithiation/delithiation process, sodiation/desodiation process of Sb anode displays a previously unexplored two-stage alloying/dealloying mechanism with polycrystalline and amorphous phases as the intermediates featuring improved resilience to mechanical damage, contributing to superior cycling stability in SIBs. Additionally, the better mechanical properties and weaker atomic interaction of Na-Sb alloys than Li-Sb alloys favor enabling mitigated mechanical stress, accounting for enhanced structural stability as unveiled by theoretical simulations. Our finding delineates the mechanistic origins of enhanced cycling stability of Sb anode in SIBs with potential implications for other large-volume-change electrode materials.

Hybrid Acid/alkali All Covalent Organic Frameworks Battery.

Covalent organic frameworks (COFs), thanks to their adjustable porous structure and abundant build-in functional motifs, have been recently regarded as promising electrode materials for a variety of batteries. There still remain grand opportunities to further utilizing their merits for developing advanced COFs-based batteries. In this paper, we propose a hybrid acid/alkali all-COFs battery by coupling pyrene-4,5,9,10-tetraone based COF cathode with anthraquinone based COF anode. In such a hybrid acid/alkali all-COFs battery, the cathodic COF favorably works in acid with a relatively positive potential, while the anodic COF preferably runs in alkali with a relatively negative potential. It thus can deliver a decently high discharge capacity of 92.97 mAh g-1 with a wide voltage window of 2.0 V, and exhibit high energy density of 74.2 Wh kg-1 along with a considerable cyclic stability over 300 cycles. The development of the proof-of-concept all-COFs battery may drive forward the improvement of newly cost-effective and performance-reliable energy storage devices.

Single-atom Iron Catalyst with Biomimetic Active Center to Accelerate Proton Spillover for Medical-level Electrosynthesis of H2 O2 Disinfectant.

Electrosynthesis of H2 O2 has great potential for directly converting O2 into disinfectant, yet it is still a big challenge to develop effective electrocatalysts for medical-level H2 O2 production. Herein, we report the design and fabrication of electrocatalysts with biomimetic active centers, consisting of single atomic iron asymmetrically coordinated with both nitrogen and sulfur, dispersed on hierarchically porous carbon (FeSA -NS/C). The newly-developed FeSA -NS/C catalyst exhibited a high catalytic activity and selectivity for oxygen reduction to produce H2 O2 at a high current of 100 mA cm-2 with a record high H2 O2 selectivity of 90 %. An accumulated H2 O2 concentration of 5.8 wt.% is obtained for the electrocatalysis process, which is sufficient for medical disinfection. Combined theoretical calculations and experimental characterizations verified the rationally-designed catalytic active center with the atomic Fe site stabilized by three-coordinated nitrogen atoms and one-sulfur atom (Fe-N3 S-C). It was further found that the replacement of one N atom with S atom in the classical Fe-N4 -C active center could induce an asymmetric charge distribution over N atoms surrounding the Fe reactive center to accelerate proton spillover for a rapid formation of the OOH* intermediate, thus speeding up the whole reaction kinetics of oxygen reduction for H2 O2 electrosynthesis.

High Entropy Alloy Electrocatalytic Electrode toward Alkaline Glycerol Valorization Coupling with Acidic Hydrogen Production.

Electrochemical glycerol oxidation reaction (GOR) is an attractive alternative anodic reaction to oxygen evolution reaction for a variety of electrolytic synthesis, thanks to the possibility of mass production of glycerol from biomass and the relative low thermodynamic potential of GOR. The development of high-activity cheap electrocatalysts toward GOR yet faces a daunting challenge. Herein, we experimentally prepare a new range of high entropy alloy (HEA) self-supported electrodes with uniform HEA nanoparticles grown on carbon cloth. The systematic electrochemical studies verify that the HEA-CoNiCuMnMo electrode exhibits attractive performance for GOR electrocatalysis with low overpotential and high selectivity toward formate products. The surface atomic configurations of HEA-CoNiCuMnMo are studied by a self-developed machine learning-based Monte Carlo simulation, which points out the catalytic active center to be Mo sites coordinated by Mn, Mo, and Ni. We further develop a hybrid alkali/acid flow electrolytic cell by pairing alkaline GOR with acidic hydrogen evolution reaction using the HEA-CoNiCuMnMo and the commercial RhIr/Ti as the anode and the cathode, respectively, which only requires an applied voltage of 0.55 V to reach an electrolytic current density of 10 mA cm-2 and maintains long-term electrolysis stability over 12 days continuous running at 50 mA cm-2 with Faraday efficiencies of over 99% for H2 in the cathode and 92% for formate production in the anode.

Single-Atom Yttrium Engineering Janus Electrode for Rechargeable Na-S Batteries.

The development of rechargeable Na-S batteries is very promising, thanks to their considerably high energy density, abundance of elements, and low costs and yet faces the issues of sluggish redox kinetics of S species and the polysulfide shuttle effect as well as Na dendrite growth. Following the theory-guided prediction, the rare-earth metal yttrium (Y)-N4 unit has been screened as a favorable Janus site for the chemical affinity of polysulfides and their electrocatalytic conversion, as well as reversible uniform Na deposition. To this end, we adopt a metal-organic framework (MOF) to prepare a single-atom hybrid with Y single atoms being incorporated into the nitrogen-doped rhombododecahedron carbon host (Y SAs/NC), which features favorable Janus properties of sodiophilicity and sulfiphilicity and thus presents highly desired electrochemical performance when used as a host of the sodium anode and the sulfur cathode of a Na-S full cell. Impressively, the Na-S full cell is capable of delivering a high capacity of 822 mAh g-1 and shows superdurable cyclability (97.5% capacity retention over 1000 cycles at a high current density of 5 A g-1). The proof-of-concept three-dimensional (3D) printed batteries and the Na-S pouch cell validate the potential practical applications of such Na-S batteries, shedding light on the development of promising Na-S full cells for future application in energy storage or power batteries.

Core-Shell Carbon-Based Bifunctional Electrocatalysts Derived from COF@MOF Hybrid for Advanced Rechargeable Zn-Air Batteries.

The development of highly active carbon-based bifunctional electrocatalysts for both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is highly desired, but still full of challenges in rechargeable Zn-air batteries. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have gained great attention for various applications due to their attractive features of structural tunability, high surface area and high porosity. Herein, a core-shell structured carbon-based hybrid electrocatalyst (H-NSC@Co/NSC), which contains high density active sites of MOF-derived shell (Co/NSC) and COF-derived hollow core (H-NSC), is successfully fabricated by direct pyrolysis of covalently-connected COF@ZIF-67 hybrid. The core-shell H-NSC@Co/NSC hybrid manifests excellent catalytic properties toward both OER and ORR with a small potential gap (∆E = 0.75 V). The H-NSC@Co/NSC assembled Zn-air battery exhibits a high power-density of 204.3 mW cm-2 and stable rechargeability, outperforming that of Pt/C+RuO2 assembled Zn-air battery. Density functional theory calculations reveal that the electronic structure of the carbon frameworks on the Co/NSC shell can be effectively modulated by the embedded Co nanoparticles (NPs), facilitating the adsorption of oxygen intermediates and leading to enhanced catalytic activity. This work will provide a strategy to design highly-efficient electrocatalysts for application in energy conversion and storage.

Sub-1 nm MoC Quantum Dots Decorating N-Doped Graphene as Advanced Electrocatalysts of Flexible Hybrid Alkali-Acid Zn-Quinone Battery.

The development of flexible energy devices is envisaged to revolutionize the next generation of the wearable electronics industry, the practical application yet faces critical issues of low power density, poor cycling stability, and low energy density. Herein, the authors report a newly flexible hybrid Zn-quinone battery (h-ZnQB) with acidic gel in the cathode and alkaline gel in the anode, in which proton (H+ ) and hydroxide ions (OH- ) are served as the ion charge carriers for acidic quinone cathode and alkaline Zn anode. To this end, the nanohybrids of sub-1 nm MoC quantum dots decorating nitrogen-doped ultrathin graphene (MoC QDs/NG) are developed as the advanced cathode electrocatalysts toward redox conversion between quinone and hydroquinone (H2 Q/Q). Comprehensive characterization studies and density functional theory (DFT) calculations reveal that high valent Mo species originating from the size-effects serve as the active sites for the conversion of H2 Q/Q, contributing to the impressive catalytic performance. The as-developed flexible h-ZnQB displays a high open-circuit voltage of 1.74 V with a specific capacity of 223.3 mAh g-1 and an energy density of 350 Wh kg-1 at 0.2 A g-1 , thanks to the fast kinetics of charge carriers (H+ and OH- ), the high activity of the catalyst, and the elaborate design of alkali-acid gel electrolytes.

Transition Metal (Co, Ni, Fe, Cu) Single-Atom Catalysts Anchored on 3D Nitrogen-Doped Porous Carbon Nanosheets as Efficient Oxygen Reduction Electrocatalysts for Zn-Air Battery.

Exploring highly active and cost-efficient single-atom catalysts (SACs) for oxygen reduction reaction (ORR) is critical for the large-scale application of Zn-air battery. Herein, density functional theory (DFT) calculations predict that the intrinsic ORR activity of the active metal of SACs follows the trend of Co > Fe > Ni ≈ Cu, in which Co SACs possess the best ORR activity due to its optimized spin density. Guided by DFT calculations, four kinds of transition metal single atoms embedded in 3D porous nitrogen-doped carbon nanosheets (MSAs@PNCN, M = Co, Ni, Fe, Cu) are synthesized via a facile NaCl-template assisted strategy. The resulting MSAs@PNCN displays ORR activity trend in lines with the theoretical predictions, and the Co SAs@PNCN exhibits the best ORR activity (E1/2  = 0.851 V), being comparable to that of Pt/C under alkaline conditions. X-ray absorption fine structure (XAFS) spectra verify the atomically dispersed Co-N4 sites are the catalytically active sites. The highly active CoN4 sites and the unique 3D porous structure contribute to the outstanding ORR performance of Co SAs@PNCN. Furthermore, the Co SAs@PNCN catalyst is employed as cathode in Zn-air battery, which can deliver a large power density of 220 mW cm-2 and maintain robust cycling stability over 530 cycles.

Electrochemical neutralization energy: from concept to devices.

Aqueous electrochemical devices such as batteries and electrolytic cells have emerged as promising energy storage and conversion systems owing to their environmental friendliness, low cost, and high safety characteristics. However, grand challenges are faced to address some critical issues, including how to enhance the potential window and energy density of electrochemical power devices (e.g. fuel cells, batteries, and supercapacitors), and how to minimize the energy consumption in electrolysis. The use of decoupled acid-base asymmetric electrolytes shows great potential in improving the performance of aqueous devices by electrochemically converting the conventional thermal energy of acid-base neutralization into electricity, i.e., electrochemical neutralization energy (ENE). This review aims to introduce the little-known concept of the ENE, including its development history, thermodynamic fundamentals, operating principles, device configurations, and applications. The recent progress made in ENE-assisted electrochemical energy devices emphasizing fuel cells, batteries, supercapacitors, and electrolytic cells is summarized specifically. Finally, the challenges and future perspectives of ENE associated technology are discussed. It is believed that this tutorial review will give a better understanding of the mechanism and operating principles of the ENE to newcomers, which would shed light on the innovative design and fabrication of ENE-assisted devices and thus pave the way for the development of high-performance aqueous electrochemical energy devices.

Electrocatalysis for CO2 conversion: from fundamentals to value-added products.

The continuously increasing CO2 released from human activities poses a great threat to human survival by fluctuating global climate and disturbing carbon balance among the four reservoirs of the biosphere, earth, air, and water. Converting CO2 to value-added feedstocks via electrocatalysis of the CO2 reduction reaction (CO2RR) has been regarded as one of the most attractive routes to re-balance the carbon cycle, thanks to its multiple advantages of mild operating conditions, easy handling, tunable products and the potential of synergy with the rapidly increasing renewable energy (i.e., solar, wind). Instead of focusing on a special topic of electrocatalysts for the CO2RR that have been extensively reviewed elsewhere, we herein present a rather comprehensive review of the recent research progress, in the view of associated value-added products upon selective electrocatalytic CO2 conversion. We initially provide an overview of the history and the fundamental science regarding the electrocatalytic CO2RR, with a special introduction to the design, preparation, and performance evaluation of electrocatalysts, the factors influencing the CO2RR, and the associated theoretical calculations. Emphasis will then be given to the emerging trends of selective electrocatalytic conversion of CO2 into a variety of value-added products. The structure-performance relationship and mechanism will also be discussed and investigated. The outlooks for CO2 electrocatalysis, including the challenges and opportunities in the development of new electrocatalysts, electrolyzers, the recently rising operando fundamental studies, and the feasibility of industrial applications are finally summarized.

Engineering Bismuth-Tin Interface in Bimetallic Aerogel with a 3D Porous Structure for Highly Selective Electrocatalytic CO2 Reduction to HCOOH.

Electrochemical reduction of CO2 (CO2 RR) into valuable hydrocarbons is appealing in alleviating the excessive CO2 level. We present the very first utilization of metallic bismuth-tin (Bi-Sn) aerogel for CO2 RR with selective HCOOH production. A non-precious bimetallic aerogel of Bi-Sn is readily prepared at ambient temperature, which exhibits 3D morphology with interconnected channels, abundant interfaces and a hydrophilic surface. Superior to Bi and Sn, the Bi-Sn aerogel exposes more active sites and it has favorable mass transfer properties, which endow it with a high FEHCOOH of 93.9 %. Moreover, the Bi-Sn aerogel achieves a FEHCOOH of ca. 90 % that was maintained for 10 h in a flow battery. In situ ATR-FTIR measurements confirmed that the formation of *HCOO is the rate-determining step toward formic acid generation. DFT demonstrated the coexistence of Bi and Sn optimized the energy barrier for the production of HCOOH, thereby improving the catalytic activity.

Scalable Synthesis of Tungsten Disulfide Nanosheets for Alkali-Acid Electrocatalytic Sulfion Recycling and H2 Generation.

WS2 nanosheets hold great promise for a variety of applications yet faces a grand challenge in terms of large-scale synthesis. We report a reliable, scalable, and high-yield (>93 %) synthetic strategy to fabricate WS2 nanosheets, which exhibit highly desirable electrocatalytic properties toward both the alkaline sulfion (S2- ) oxidation reaction (SOR) and the acidic hydrogen evolution reaction (HER). The findings prompted us to develop a hybrid alkali-acid electrochemical cell with the WS2 nanosheets as bifunctional electrode catalysts of alkaline anodic SOR and acidic cathodic HER. The proof-of-concept device holds promise for self-power or low-electricity electrolytic H2 generation and environmentally friendly recycling of sulfion with enhanced electron utilization efficiency.

Boosting Electroreduction Kinetics of Nitrogen to Ammonia via Tuning Electron Distribution of Single-Atomic Iron Sites.

Electrocatalytic nitrogen reduction reaction (NRR) plays a vital role for next-generation electrochemical energy conversion technologies. However, the NRR kinetics is still limited by the sluggish hydrogenation process on noble-metal-free electrocatalyst. Herein, we report the rational design and synthesis of a hybrid catalyst with atomic iron sites anchored on a N,O-doped porous carbon (FeSA -NO-C) matrix of an inverse opal structure, leading to a remarkably high NH3 yield rate of 31.9 µg NH 3 h-1 mg-1 cat. and Faradaic efficiency of 11.8 % at -0.4 V for NRR electrocatalysis, outperformed almost all previously reported atomically dispersed metal-nitrogen-carbon catalysts. Theoretical calculations revealed that the observed high NRR catalytic activity for the FeSA -NO-C catalyst stemmed mainly from the optimized charge-transfer between the adjacent O and Fe atoms homogenously distributed on the porous carbon support, which could not only significantly facilitate the transportation of N2 and ions but also effectively decrease the binding energy between the isolated Fe atom and *N2 intermediate and the thermodynamic Gibbs free energy of the rate-determining step (*N2 → *NNH).