Switchable electronic and enhanced magnetic properties of CrI3 edges.

Owing to its novel electronic and magnetic properties, two-dimensional CrI3 has great potential in the application of spintronic devices. However, as an inevitable line defect, the properties of the edges of CrI3 remain elusive. Here, via first-principles calculations with spin-orbit coupling, we investigated the thermodynamic stabilities, electronic and magnetic properties of thirteen CrI3 edges with different structures. We showed that zigzag edges are more stable than armchair edges, and a CrI3 nanoribbon can be either metallic or insulating depending on its chemical growth conditions. The edge stability and associated electronic properties can be understood in terms of the octahedron ligand field and electron counting model. In most cases, both the magnetic moment and Curie temperature can be enhanced by edges, which are in startle contrast to the surfaces of three-dimensional ferromagnetic materials, where a magnetic dead layer is often observed.

Enhanced Light Emission from the Ridge of Two-Dimensional InSe Flakes.

InSe, a newly rediscovered two-dimensional (2D) semiconductor, possesses superior electrical and optical properties as a direct-band-gap semiconductor with high mobility from bulk to atomically thin layers and is drastically different from transition-metal dichalcogenides, in which the direct band gap only exists at the single-layer limit. However, absorption in InSe is mostly dominated by an out-of-plane dipole contribution, which results in the limited absorption of normally incident light that can only excite the in-plane dipole at resonance. To address this challenge, we have explored a unique geometric ridge state of the 2D flake without compromising the sample quality. We observed the enhanced absorption at the ridge over a broad range of excitation frequencies from photocurrent and photoluminescence (PL) measurements. In addition, we have discovered new PL peaks at low temperatures due to defect states on the ridge, which can be as much as ∼60 times stronger than the intrinsic PL peak of InSe. Interestingly, the PL of the defects is highly tunable through an external electrical field, which can be attributed to the Stark effect of the localized defects. InSe ridges thus provide new avenues for manipulating light-matter interactions and defect engineering that are vitally crucial for novel optoelectronic devices based on 2D semiconductors.

Band Alignment and the Built-in Potential of Solids.

The built-in potential is of central importance to the understanding of many interfacial phenomena because it determines the band alignment at the interface. Despite its importance, its exact sign and magnitude have generally been recognized as ill-defined quantities for more than half a century. Here, we provide a common energy reference of bulk matter which leads to an unambiguous definition of the built-in potential and innate (i.e., bulk) band alignment. Further, we find that the built-in potential is explicitly determined by the bulk properties of the constituent materials when the system is in electronic equilibrium, while the interface plays a role only in the absence of equilibrium. Our quantitative theory enables a unified description of a variety of important properties of interfaces, ranging from work functions to Schottky barriers in electronic devices.

Traditional Semiconductors in the Two-Dimensional Limit.

Interest in two-dimensional materials has exploded in recent years. Not only are they studied due to their novel electronic properties, such as the emergent Dirac fermion in graphene, but also as a new paradigm in which stacking layers of distinct two-dimensional materials may enable different functionality or devices. Here, through first-principles theory, we reveal a large new class of two-dimensional materials which are derived from traditional III-V, II-VI, and I-VII semiconductors. It is found that in the ultrathin limit the great majority of traditional binary semiconductors studied (a series of 28 semiconductors) are not only kinetically stable in a two-dimensional double layer honeycomb structure, but more energetically stable than the truncated wurtzite or zinc-blende structures associated with three dimensional bulk. These findings both greatly increase the landscape of two-dimensional materials and also demonstrate that in the double layer honeycomb form, even ordinary semiconductors, such as GaAs, can exhibit exotic topological properties.

Directional Forces by Momentumless Excitation and Order-to-Order Transition in Peierls-Distorted Solids: The Case of GeTe.

Time-dependent density-functional theory molecular dynamics reveals an unexpected effect of optical excitation in the experimentally observed rhombohedral-to-cubic transition of GeTe. The excitation induces coherent forces along [001], which may be attributed to the unique energy landscape of Peierls-distorted solids. The forces drive the A_{1g} optical phonon mode in which Ge and Te move out of phase. Upon damping of the A_{1g} mode, phase transition takes place, which involves no atomic diffusion, defect formation, or the nucleation and growth of the cubic phase.

Toward the Intrinsic Limit of the Topological Insulator Bi_{2}Se_{3}.

Combining high resolution scanning tunneling microscopy and first principles calculations, we identified the major native defects, in particular the Se vacancies and Se interstitial defects, that are responsible for the bulk conduction and nanoscale potential fluctuations in single crystals of archetypal topological insulator Bi_{2}Se_{3}. Here it is established that the defect concentrations in Bi_{2}Se_{3} are far above the thermodynamic limit, and that the growth kinetics dominate the observed defect concentrations. Furthermore, through careful control of the synthesis, our tunneling spectroscopy suggests that our best samples are approaching the intrinsic limit with the Fermi level inside the band gap without introducing extrinsic dopants.

Regulating energy transfer of excited carriers and the case for excitation-induced hydrogen dissociation on hydrogenated graphene.

Understanding and controlling of excited carrier dynamics is of fundamental and practical importance, particularly in photochemistry and solar energy applications. However, theory of energy relaxation of excited carriers is still in its early stage. Here, using ab initio molecular dynamics (MD) coupled with time-dependent density functional theory, we show a coverage-dependent energy transfer of photoexcited carriers in hydrogenated graphene, giving rise to distinctively different ion dynamics. Graphene with sparsely populated H is difficult to dissociate due to inefficient transfer of the excitation energy into kinetic energy of the H. In contrast, H can easily desorb from fully hydrogenated graphane. The key is to bring down the H antibonding state to the conduction band minimum as the band gap increases. These results can be contrasted to those of standard ground-state MD that predict H in the sparse case should be much less stable than that in fully hydrogenated graphane. Our findings thus signify the importance of carrying out explicit electronic dynamics in excited-state simulations.

Vertical/Planar Growth and Surface Orientation of Bi2Te3 and Bi2Se3 Topological Insulator Nanoplates.

Nanostructures are not only attractive for fundamental research but also offer great promise for bottom-up nanofabrications. In the past, the growth of one-dimensional vertical/planar nanomaterials such as nanowires has made significant progresses. However, works on two-dimensional nanomaterials are still lacking, especially for those grown out of a substrate. We report here a vertical growth of topological insulator, Bi2Se3 and Bi2Te3, nanoplates on mica. In stark contrast to the general belief, these nanoplates are not prisms exposing (100) lateral surfaces, which are expected to minimize the surface area. Instead, they are frustums, enclosed by (01-4), (015), and (001) facets. First-principles calculations, combined with experiments, suggest the importance of surface oxidation in forming these unexpected surfaces.

Determination of formation and ionization energies of charged defects in two-dimensional materials.

We present a simple and efficient approach to evaluate the formation energy and, in particular, the ionization energy (IE) of charged defects in two-dimensional (2D) systems using the supercell approximation. So far, first-principles results for such systems can scatter widely due to the divergence of the Coulomb energy with vacuum dimension, denoted here as L_{z}. Numerous attempts have been made in the past to fix the problem under various approximations. Here, we show that the problem can be resolved without any such assumption, and a converged IE can be obtained by an extrapolation of the asymptotic IE expression at large L_{z} (with a fixed lateral area S) back to the value at L_{z}=0. Application to defects in monolayer boron nitride reveal that defects in 2D systems can be unexpectedly deep, much deeper than the bulk.

A nucleus-coupled electron transfer mechanism for TiO2-catalyzed water splitting.

Based on first-principles calculations, we reveal that in the photocatalytic oxygen evolution reaction (OER) at the TiO2/water interface, the formation of an O-O bond always involves the anti-bonding σ2p* state elevated from the valence band into the conduction band of TiO2 regardless of a detailed reaction pathway. The role of photoholes is to deplete this anti-bonding state once it emerges into the band gap. The reaction barrier is thus determined by the onset where photoholes enter the reaction. This process represents a new reaction mechanism, termed nucleus-coupled electron transfer (NCET), where electron transfer is enabled by the movement of nuclei that promotes the reactive orbital to become the frontier orbital. The NCET mechanism for the OER is shown to exhibit an overall kinetic barrier surmountable at room temperature.

The new phase [Tl4Sb6Se10][Sn5Sb2Se14]: a naturally formed semiconducting heterostructure with two-dimensional conductance.

We report on a new layered semiconductor Tl8Sn10Sb16Se48 with an indirect band gap of 0.45 eV. The novel structure is made of alternating layers of SnSe2-type [Sn5Sb2Se14] and SnSe-type [Tl4Sb6Se10]. The material exhibits two-dimensional (2D) electron variable range hopping at low temperatures, indicating an absence of interlayer coherency of the electronic state. Theoretical calculations unveil a 2D confinement for electrons in the [Sn5Sb2Se14] sheet and confirm the heterostructure nature. This unique electronic structure is attributed to the weak interlayer coupling and structure distortion in the electron-poor [Tl4Sb6Se10] layer that energetically impedes electron propagation.

Direct atom-by-atom chemical identification of nanostructures and defects of topological insulators.

We present a direct atom-by-atom chemical identification of the nanostructures and defects of topological insulators (TIs) with a state-of-the-art atomic mapping technology. Combining this technique and density function theory calculations, we identify and explain the layer chemistry evolution of Bi(2)Te(3­x)Se(x) ternary TIs. We also reveal a long neglected but crucially important extended defect found to be universally present in Bi(2)Te(3) films, the seven-layer Bi(3)Te(4) nanolamella acceptors. Intriguingly, this defect is found to locally pull down the conduction band, leading to local n-type conductivity, despite being an acceptor which pins the Fermi energy near the valence band maximum. This nanolamella may explain inconsistencies in measured conduction type as well as open up a new route to manipulate bulk carrier concentration. Our work may pave the way to more thoroughly understand and tailor the nature of the bulk, as well as secure controllable bulk states for future applications in quantum computing and dissipationless devices.

Manipulating single excess electrons in monolayer transition metal dihalide.

Polarons are entities of excess electrons dressed with local response of lattices, whose atomic-scale characterization is essential for understanding the many body physics arising from the electron-lattice entanglement, yet difficult to achieve. Here, using scanning tunneling microscopy and spectroscopy (STM/STS), we show the visualization and manipulation of single polarons in monolayer CoCl2, that are grown on HOPG substrate via molecular beam epitaxy. Two types of polarons are identified, both inducing upward local band bending, but exhibiting distinct appearances, lattice occupations and polaronic states. First principles calculations unveil origin of polarons that are stabilized by cooperative electron-electron and electron-phonon interactions. Both types of polarons can be created, moved, erased, and moreover interconverted individually by the STM tip, as driven by tip electric field and inelastic electron tunneling effect. This finding identifies the rich category of polarons in CoCl2 and their feasibility of precise control unprecedently, which can be generalized to other transition metal halides.

Prediction of Effective Photoelectron and Hole Separation in Type-I MoS2/PtSe2 van der Waals Junction.

Understanding the dynamics of charge transfer at vertical heterostructures of transition metal dichalcogenide monolayers is fundamentally important for future technological applications, given the unique feature of van der Waals interactions at the interface. Here, we employ time-dependent density functional theory formalism combined with molecular dynamics to investigate photoexcited electrons and holes in the type-I MoS2/PtSe2 van der Waals heterobilayer. While type-I junctions have been traditionally viewed as being ineffective in photocarrier separation, we show that here a different mechanism from type-II is at play, which effectively separates photoelectrons from photoholes. The key is the phonon bottleneck, arising from the characteristically different dynamic band alignments in the valence and conduction bands, respectively, which only affects the transfer of holes but not electrons. The disparity between electron and hole transfer rates offers a new direction for effective control of charge separation at interfaces.

Ligand-Assisted Charge-Transfer Mechanism: The Case of CdSe/Cysteine/MoS2 Heterostructures.

Molecular linkers, such as cysteine, are used to stabilize colloidal quantum dots (QDs) and anchor them. Despite the typically large molecular HOMO/LUMO gap of linkers, they can increase the quantum yield and provide an effective charge-transfer channel. Through first-principles calculations, we investigate the ligand binding and the implications for charge transfer using a prototypical CdSe-Cysteine-MoS2 three-way heterostructure. We find that the deprotonated ligand interacts with both sides of the heterostructure, which allows for successful self-passivation of the cysteine ligand molecule and the formation of dative bonds with a greatly reduced molecular gap compared with the gas phase. This leads to the formation of a charge-transfer state that is delocalized across the ligand and can directly assist electron transfer from the conduction band of colloidal CdSe QDs to the underlying MoS2 substrate, which is a mechanism that could extend far beyond 0D-2D hybrid systems.

Remote Passivation in Two-Dimensional Materials: The Case of the Monolayer-Bilayer Lateral Junction of MoSe2.

Two-dimensional (2D) monolayer-bilayer (ML-BL) lateral junctions (LJs) have recently attracted attention due to their straightforward synthesis and resulting clean interface. Such systems consist of an extended ML with a secondary layer present only over half of the system, leading to an interface that is associated with the terminating edge of the secondary half layer. Our first-principles calculations reveal that the edges of the half layer completely lack reconstruction in the presence of unintentional dopants, in this case, Re. This observation is in startling contrast to the known physics of three-dimensional (3D) semiconductor surfaces where reconstruction has been widely observed. Herein, the electrostatics of the reduced dimensionality allows for greater separation between compensating defects, enabling dopants to remotely passivate edge states without needing to directly participate in the chemistry.

Realization of AlSb in the Double-Layer Honeycomb Structure: A Robust Class of Two-Dimensional Material.

Exploring two-dimensional (2D) van der Waals (vdW) systems is at the forefront of materials of physics. Here, through molecular beam epitaxy on graphene-covered SiC(0001), we report successful growth of AlSb in the double-layer honeycomb (DLHC) structure, a 2D vdW material which has no direct analogue to its 3D bulk and is predicted to be kinetically stable when freestanding. The structural morphology and electronic structure of the experimental 2D AlSb are characterized with spectroscopic imaging scanning tunneling microscopy and cross-sectional imaging scanning transmission electron microscopy, which compare well to the proposed DLHC structure. The 2D AlSb exhibits a band gap of 0.93 eV versus the predicted 1.06 eV, which is substantially smaller than the 1.6 eV of bulk. We also attempt the less-stable InSb DLHC structure; however, it grows into bulk islands instead. The successful growth of a DLHC material here demonstrates the feasibility for the realization of a large family of 2D DLHC traditional semiconductors with characteristic excitonic, topological, and electronic properties.

Orientation-Controlled Large-Area Epitaxial PbI2 Thin Films with Tunable Optical Properties.

Lead iodide (PbI2) as a layered material has emerged as an excellent candidate for optoelectronics in the visible and ultraviolet regime. Micrometer-sized flakes synthesized by mechanical exfoliation from bulk crystals or by physical vapor deposition have shown a plethora of applications from low-threshold lasing at room temperature to high-performance photodetectors with large responsivity and faster response. However, large-area centimeter-sized growth of epitaxial thin films of PbI2 with well-controlled orientation has been challenging. Additionally, the nature of grain boundaries in epitaxial thin films of PbI2 remains elusive. Here, we use mica as a model substrate to unravel the growth mechanism of large-area epitaxial PbI2 thin films. The partial growth leading to uncoalesced domains reveals the existence of inversion domain boundaries in epitaxial PbI2 thin films on mica. Combining the experimental results with first-principles calculations, we also develop an understanding of the thermodynamic and kinetic factors that govern the growth mechanism, which paves the way for the synthesis of high-quality large-area PbI2 on other substrates and heterostructures of PbI2 on single-crystalline graphene. The ability to reproducibly synthesize high-quality large-area thin films with precise control over orientation and tunable optical properties could open up unique and hitherto unavailable opportunities for the use of PbI2 and its heterostructures in optoelectronics, twistronics, substrate engineering, and strain engineering.

Epitaxial Growth of Two-Dimensional Insulator Monolayer Honeycomb BeO.

The emergence of two-dimensional (2D) materials launched a fascinating frontier of flatland electronics. Most crystalline atomic layer materials are based on layered van der Waals materials with weak interlayer bonding, which naturally leads to thermodynamically stable monolayers. We report the synthesis of a 2D insulator composed of a single atomic sheet of honeycomb structure BeO (h-BeO), although its bulk counterpart has a wurtzite structure. The h-BeO is grown by molecular beam epitaxy (MBE) on Ag(111) thin films that are also epitaxially grown on Si(111) wafers. Using scanning tunneling microscopy and spectroscopy (STM/S), the honeycomb BeO lattice constant is determined to be 2.65 Å with an insulating band gap of 6 eV. Our low-energy electron diffraction measurements indicate that the h-BeO forms a continuous layer with good crystallinity at the millimeter scale. Moiré pattern analysis shows the BeO honeycomb structure maintains long-range phase coherence in atomic registry even across Ag steps. We find that the interaction between the h-BeO layer and the Ag(111) substrate is weak by using STS and complementary density functional theory calculations. We not only demonstrate the feasibility of growing h-BeO monolayers by MBE, but also illustrate that the large-scale growth, weak substrate interactions, and long-range crystallinity make h-BeO an attractive candidate for future technological applications. More significantly, the ability to create a stable single-crystalline atomic sheet without a bulk layered counterpart is an intriguing approach to tailoring 2D electronic materials.

Carrier Dynamics and Transfer across the CdS/MoS2 Interface upon Optical Excitation.

Carrier dynamics across the interface of heterostructures have important technological, photovoltaic, and catalytic implications. Using first-principles time-dependent density functional theory, we have systematically investigated the charge transfer of excited carriers from CdS to MoS2 and found that two interdependent mechanisms are responsible for the transfer, one slow and one fast. While the slower process may be attributed to typical electron-phonon coupling, the interfacial dipole resulting from this transfer enables a fast secondary process involving a level crossing of the excited carrier state in CdS with receiving states in MoS2. An analysis based on the interfacial binding energy reveals that the Cd-terminated (001) interface is by far the most energetically favorable, which in addition to its calculated fast resonant electron transfer suggests it is a good candidate to explain the experimentally observed charge transfer between CdS and MoS2.