RESUMO
PURPOSE: To demonstrate papillary imaging of eyes with optic disc pits (ODP) or optic disc pit associated maculopathy (ODP-M) with ultrahigh-speed swept-source optical coherence tomography (SS-OCT) at 1.68 million A-scans/s. To generate 3D-renderings of the papillary area with 3D volume-reconstructions of the ODP and highly resolved en face images from a single densely-sampled megahertz-OCT (MHz-OCT) dataset for investigation of ODP-characteristics. METHODS: A 1.68 MHz-prototype SS-MHz-OCT system at 1050 nm based on a Fourier-domain mode-locked laser was employed to acquire high-definition, 3D datasets with a dense sampling of 1600 × 1600 A-scans over a 45° field of view. Six eyes with ODPs, and two further eyes with glaucomatous alteration or without ocular pathology are presented. 3D-rendering of the deep papillary structures, virtual 3D-reconstructions of the ODPs and depth resolved isotropic en face images were generated using semiautomatic segmentation. RESULTS: 3D-rendering and en face imaging of the optic disc, ODPs and ODP associated pathologies showed a broad spectrum regarding ODP characteristics. Between individuals the shape of the ODP and the appending pathologies varied considerably. MHz-OCT en face imaging generates distinct top-view images of ODPs and ODP-M. MHz-OCT generates high resolution images of retinal pathologies associated with ODP-M and allows visualizing ODPs with depths of up to 2.7 mm. CONCLUSIONS: Different patterns of ODPs can be visualized in patients for the first time using 3D-reconstructions and co-registered high-definition en face images extracted from a single densely sampled 1050 nm megahertz-OCT (MHz-OCT) dataset. As the immediate vicinity to the SAS and the site of intrapapillary proliferation is located at the bottom of the ODP it is crucial to image the complete structure and the whole depth of ODPs. Especially in very deep pits, where non-swept-source OCT fails to reach the bottom, conventional swept-source devices and the MHz-OCT alike are feasible and beneficial methods to examine deep details of optic disc pathologies, while the MHz-OCT bears the advantage of an essentially swifter imaging process.
Assuntos
Anormalidades do Olho/diagnóstico , Imageamento Tridimensional , Macula Lutea/patologia , Disco Óptico/patologia , Doenças Retinianas/diagnóstico , Tomografia de Coerência Óptica/instrumentação , Adolescente , Adulto , Idoso , Desenho de Equipamento , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Disco Óptico/anormalidades , Projetos Piloto , Reprodutibilidade dos Testes , Adulto JovemRESUMO
The absorption of nanosecond laser pulses induces rapid thermo-elastic deformation in tissue. A sub-micrometer scale displacement occurs within a few microseconds after the pulse arrival. In this Letter, we investigate the laser-induced thermo-elastic deformation using a 1.5 MHz phase-sensitive optical coherence tomography (OCT) system. A displacement image can be reconstructed, which enables a new modality of phase-sensitive OCT, called thermo-elastic OCT. An analysis of the results shows that the optical absorption is a dominating factor for the displacement. Thermo-elastic OCT is capable of visualizing inclusions that do not appear on the structural OCT image, providing additional tissue type information.
RESUMO
PURPOSE: To investigate the structural changes of intrapapillary proliferations associated with optic disk pits (ODPs) and optic disk pit maculopathy (ODP-M) using enhanced depth-spectral domain-optical coherence tomography (SD-EDI-OCT) and megahertz optical coherence tomography (MHz-OCT). METHODS: Sixteen eyes of patients with ODPs were studied. Papillary and peripapillary areas were repeatedly examined with SD-EDI-OCT over time. To evaluate swept-source OCT, some of the patients additionally received MHz-OCT-imaging. RESULTS: MHz-OCT or SD-EDI images showed the entire form of the pits from opening to bottom in 13 of the 16 cases. The shape of ODPs varied considerably. In patients with unilateral ODP, deep intrapapillary depressions in the optic disk of the contralateral partner eye were a prevalent finding. Intrapapillary proliferations were observed in all ODP-cases during follow-up. The aspect of intrapapillary and prepapillary tissue, septae, and cavities changed over time. This effect was especially pronounced inside the ODP while the eye experienced simultaneous ODP-M. CONCLUSION: All examined eyes with ODP showed signs of intrapapillary and prepapillary tissue, which developed over time. SD-EDI-OCT and MHz-OCT are able to detect characteristic ODP-related findings and are a useful means to monitor time-related changes within intrapapillary and prepapillary tissue related to ODP and ODP-M.
Assuntos
Anormalidades do Olho/diagnóstico por imagem , Disco Óptico/anormalidades , Doenças do Nervo Óptico/diagnóstico por imagem , Adolescente , Adulto , Idoso , Criança , Progressão da Doença , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Disco Óptico/diagnóstico por imagem , Fatores de Tempo , Tomografia de Coerência Óptica/métodos , Adulto JovemRESUMO
BACKGROUND: To investigate the image quality of wide-angle cross-sectional and reconstructed fundus images based on ultra-megahertz swept-source Fourier domain mode locking (FDML) OCT compared to current generation diagnostic devices. METHODS: A 1,050 nm swept-source FDML OCT system was constructed running at 1.68 MHz A-scan rate covering approximately 70° field of view. Twelve normal eyes were imaged with the device applying an isotropically dense sampling protocol (1,900 × 1,900 A-scans) with a fill factor of 100 %. Obtained OCT scan image quality was compared with two commercial OCT systems (Heidelberg Spectralis and Stratus OCT) of the same 12 eyes. Reconstructed en-face fundus images from the same FDML-OCT data set were compared to color fundus, infrared and ultra-wide-field scanning laser images (SLO). RESULTS: Comparison of cross-sectional scans showed a high overall image quality of the 15× averaged FDML images at 1.68 MHz [overall quality grading score: 8.42 ± 0.52, range 0 (bad)-10 (excellent)] comparable to current spectral-domain OCTs (overall quality grading score: 8.83 ± 0.39, p = 0.731). On FDML OCT, a dense 3D data set was obtained covering also the central and mid-peripheral retina. The reconstructed FDML OCT en-face fundus images had high image quality comparable to scanning laser ophthalmoscope (SLO) as judged from retinal structures such as vessels and optic disc. Overall grading score was 8.36 ± 0.51 for FDML OCT vs 8.27 ± 0.65 for SLO (p = 0.717). CONCLUSIONS: Ultra-wide-field megahertz 3D FDML OCT at 1.68 MHz is feasible, and provides cross-sectional image quality comparable to current spectral-domain OCT devices. In addition, reconstructed en-face visualization of fundus images result in a wide-field view with high image quality as compared to currently available fundus imaging devices. The improvement of >30× in imaging speed over commercial spectral-domain OCT technology enables high-density scan protocols leading to a data set for high quality cross-sectional and en-face images of the posterior segment.
Assuntos
Corioide/anatomia & histologia , Segmento Posterior do Olho/anatomia & histologia , Retina/anatomia & histologia , Tomografia de Coerência Óptica/métodos , Adulto , Anatomia Transversal , Feminino , Angiofluoresceinografia , Análise de Fourier , Voluntários Saudáveis , Humanos , Masculino , OftalmoscopiaRESUMO
We demonstrate intravascular optical coherence tomography (OCT) imaging with frame rate up to 3.2 kHz (192,000 rpm scanning). This was achieved by using a custom-built catheter in which the circumferential scanning was actuated by a 1.0 mm diameter synchronous motor. The OCT system, with an imaging depth of 3.7 mm (in air), is based on a Fourier domain mode locked laser operating at an A-line rate of 1.6 MHz. The diameter of the catheter is 1.1 mm at the tip. Ex vivo images of human coronary artery (78.4 mm length) were acquired at a pullback speed of 100 mm/s. True 3D volumetric imaging of the entire artery, with dense and isotropic sampling in all dimensions, was performed in <1 second acquisition time.
Assuntos
Vasos Coronários , Tomografia de Coerência Óptica/métodos , Catéteres , Análise de Fourier , Coração/fisiologia , Humanos , Fatores de Tempo , Tomografia de Coerência Óptica/instrumentaçãoRESUMO
This paper presents a Fourier domain mode locked (FDML) laser centered around 840â nm. It features a bidirectional sweep repetition rate of 828 kHz and a spectral bandwidth of 40â nm. An axial resolution of â¼9.9 µm in water and a 1.4â cm sensitivity roll-off are achieved. Utilizing a complex master-slave (CMS) recalibration method and due to a sufficiently high sensitivity of 84.6â dB, retinal layers of the human eye in-vivo can be resolved during optical coherence tomography (OCT) examination. The developed FDML laser enables acquisition rates of 3D-volumes with a size of 200 × 100 × 256 voxels in under 100 milliseconds. Detailed information on the FDML implementation, its challenging design tasks, and OCT images obtained with the laser are presented in this paper.
RESUMO
We present detailed investigations of chromatic polarization effects, caused by fiber spools used in FDML lasers and buffering spools for rapidly wavelength swept lasers. We introduce a novel wavelength swept FDML laser source, specially tailored for polarization sensitive optical coherence tomography (OCT) which switches between two different linear polarization states separated by 45°, i.e. 90° on the Poincaré sphere. The polarization maintaining laser cavity itself generates a stable linear polarization state and uses an external buffering technique in order to provide alternating polarization states for successive wavelength sweeps. The design of the setup is based on a comprehensive analysis of the polarization output from FDML lasers, using a novel 150 MHz polarization analyzer. We investigate the fiber polarization properties related to swept source OCT for different fiber delay topologies and analyze the polarization state of different FDML laser sources.
Assuntos
Tecnologia de Fibra Óptica/instrumentação , Lasers , Refratometria/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Espalhamento de RadiaçãoRESUMO
We introduce a method to extract the photoacoustic (PA) signal from the phase time evolution of an optical coherence tomography (OCT) swept source spectral sweep. This all-optical detection is achieved in a noncontact fashion directly on the sample surface by using its specular reflection. High-speed measurement and referencing allow for close to shot noise limited phase-sensitive detection. It offers a simple way to perform OCT and PA imaging by sharing the same system components.
Assuntos
Técnicas Fotoacústicas/métodos , Tomografia de Coerência Óptica/métodos , Imagens de FantasmasRESUMO
We present a theoretical and experimental analysis of the instantaneous lineshape of Fourier domain mode-locked (FDML) lasers, yielding good agreement. The simulations are performed employing a recently introduced model for FDML operation. Linewidths around 10 GHz are found, which is significantly below the sweep filter bandwidth. The effect of detuning between the sweep filter drive frequency and cavity roundtrip time is studied revealing features that cannot be resolved in the experiment, and shifting of the instantaneous power spectrum against the sweep filter center frequency is analyzed. We show that, in contrast to most other semiconductor based lasers, the instantaneous linewidth is governed neither by external noise sources nor by amplified spontaneous emission, but it is directly determined by the complex FDML dynamics.
Assuntos
Lasers , Modelos Teóricos , Simulação por Computador , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Análise de FourierRESUMO
Fourier domain mode locked (FDML) lasers are excellent tunable laser sources for frequency domain optical coherence tomography (FD-OCT) systems due to their combination of high sweep rates, large tuning ranges, and high output powers. However, conventional FDML lasers provide coherence lengths of only 4-10 mm, limiting their use in demanding applications such as intravascular OCT where coherence lengths of >20 mm are required for optimal imaging of large blood vessels. Furthermore, like most swept lasers, conventional FDML lasers produce only one useable sweep direction per tunable filter drive cycle, halving the effective sweep rate of the laser compared to the filter drive frequency. Here, we demonstrate a new class of FDML laser incorporating broadband dispersion compensation near 1310 nm. Elimination of chromatic dispersion in the FDML cavity results in the generation of forward (short to long wavelength) and backward (long to short wavelength) sweeps with substantially identical properties and coherence lengths of >21 mm. This advance enables long-range, high-speed FD-OCT imaging without the need for optical buffering stages, significantly reducing laser cost and complexity.
Assuntos
Análise de Fourier , Óptica e Fotônica/métodos , Tomografia de Coerência Óptica/métodos , Algoritmos , Biotecnologia/métodos , Diagnóstico por Imagem/métodos , Desenho de Equipamento , Lasers , Modelos Estatísticos , Fibras Ópticas , Semicondutores , Tomografia de Coerência Óptica/instrumentaçãoRESUMO
We demonstrate ultrahigh speed swept source retinal OCT imaging using a Fourier domain mode locked (FDML) laser. The laser uses a combination of a semiconductor optical amplifier and an ytterbium doped fiber amplifier to provide more than 50 mW output power. The 1050 nm FDML laser uses standard telecom fiber for the km long delay line instead of two orders of magnitude more expensive real single mode fiber. We investigate the influence of this "oligo-mode" fiber on the FDML laser performance. Two design configurations with 684,400 and 1,368,700 axial scans per second are investigated, 25x and 50x faster than current commercial instruments and more than 4x faster than previous single spot ophthalmic results. These high speeds enable the acquisition of densely sampled ultrawide-field data sets of the retina within a few seconds. Ultrawide-field data consisting of 1900 x 1900 A-scans with ~70° angle of view are acquired within only 3 and 6 seconds using the different setups. Such OCT data sets, more than double as large as previously reported, are collapsed to a 4 megapixel high definition fundus image. We achieve good penetration into the choroid by hardware spectral shaping of the laser output. The axial resolution in tissue is 12 µm (684 kHz) and 19 µm (1.37 MHz). A series of new data processing and imaging extraction protocols, enabled by the ultrawide-field isotropic data sets, are presented. Dense isotropic sampling enables both, cross-sectional images along arbitrary coordinates and depth-resolved en-face fundus images. Additionally, we investigate how isotropic averaging compares to the averaging of cross-sections along the slow axis.
Assuntos
Análise de Fourier , Lasers , Retina/anatomia & histologia , Tomografia de Coerência Óptica/métodos , Fundo de Olho , Humanos , Processamento de Imagem Assistida por Computador , InterferometriaRESUMO
We present a Bessel beam illumination FDOCT setup using a FDML Swept Source at 1300 nm with up to 440 kHz A-scan rate, and discuss its advantages for structural and functional imaging of highly scattering samples. An extended focus is achieved due to the Bessel beam that preserves its lateral extend over a large depth range. Furthermore, Bessel beams exhibit a self-reconstruction property that allows imaging even behind obstacles such as hairs on skin. Decoupling the illumination from the gaussian detection increases the global sensitivity and enables dark field imaging. Dark field imaging is useful to avoid strong reflexes from the sample surface that adversely affect the sensitivity due to the limited dynamic range of high speed 8 bit acquisition cards. In addition the possibility of contrasting capillaries with high sensitivity is shown, using inter-B-scan speckle variance analysis. We demonstrate intrinsic advantages of the extended focus configuration, in particular the reduction of the phase decorrelation effect below vessels leading to improved axial vessel definition.
Assuntos
Vasos Sanguíneos/anatomia & histologia , Iluminação/instrumentação , Iluminação/métodos , Tomografia de Coerência Óptica/instrumentação , Tomografia de Coerência Óptica/métodos , Artefatos , Derme/irrigação sanguínea , Desenho de Equipamento , Vidro/química , Humanos , Microcirculação , Microesferas , Poliestirenos/química , Espalhamento de RadiaçãoRESUMO
We present ultra high speed optical coherence tomography (OCT) with multi-megahertz line rates and investigate the achievable image quality. The presented system is a swept source OCT setup using a Fourier domain mode locked (FDML) laser. Three different FDML-based swept laser sources with sweep rates of 1, 2.6 and 5.2MHz are compared. Imaging with 4 spots in parallel quadruples the effective speed, enabling depth scan rates as high as 20.8 million lines per second. Each setup provides at least 98dB sensitivity and approximately 10microm resolution in tissue. High quality 2D and 3D imaging of biological samples is demonstrated at full scan speed. A discussion about how to best specify OCT imaging speed is included. The connection between voxel rate, line rate, frame rate and hardware performance of the OCT setup such as sample rate, analog bandwidth, coherence length, acquisition dead-time and scanner duty cycle is provided. Finally, suitable averaging protocols to further increase image quality are discussed.
Assuntos
Imageamento Tridimensional/métodos , Imageamento Tridimensional/normas , Tomografia de Coerência Óptica/instrumentação , Tomografia de Coerência Óptica/métodos , Cucumis sativus/anatomia & histologia , Dedos/anatomia & histologia , Humanos , Interferometria , LasersRESUMO
While swept source optical coherence tomography (OCT) in the 1050 nm range is promising for retinal imaging, there are certain challenges. Conventional semiconductor gain media have limited output power, and the performance of high-speed Fourier domain mode-locked (FDML) lasers suffers from chromatic dispersion in standard optical fiber. We developed a novel light source with a tapered amplifier as gain medium, and investigated the FDML performance comparing two fiber delay lines with different dispersion properties. We introduced an additional gain element into the resonator, and thereby achieved stable FDML operation, exploiting the full bandwidth of the tapered amplifier despite high dispersion. The light source operates at a repetition rate of 116 kHz with an effective average output power in excess of 30 mW. With a total sweep range of 70 nm, we achieved an axial resolution of 15 microm in air (approximately 11 microm in tissue) in OCT measurements. As our work shows, tapered amplifiers are suitable gain media for swept sources at 1050 nm with increased output power, while high gain counteracts dispersion effects in an FDML laser.
Assuntos
Amplificadores Eletrônicos , Análise de Fourier , Luz , Tomografia de Coerência Óptica/instrumentação , Tomografia de Coerência Óptica/métodos , Cucumis/citologia , Humanos , Interferometria , Pele/citologia , Análise EspectralRESUMO
The instantaneous linewidth of rapidly wavelength-swept laser sources as used for optical coherence tomography (OCT) is of crucial interest for a deeper understanding of physical effects involved in their operation. Swept lasers for OCT, typically sweeping over ~15 THz in ~10 µs, have linewidths of several gigahertz. The high optical-frequency sweep speed makes it impossible to measure the instantaneous spectrum with standard methods. Hence, up to now, experimental access to the instantaneous linewidth was rather indirect by the inverse Fourier transform of the coherence decay. In this Letter, we present a method by fast synchronous time gating and extraction of a "snapshot" of the instantaneous spectrum with an electro-optic modulator, which can subsequently be measured with an optical spectrum analyzer. This new method is analyzed in detail, and systematic artifacts, such as sideband generation due to the modulation and residual wavelength uncertainty due to the sweeping operation, are quantified. The method is checked for consistency with results from the common, more indirect measurement via coherence properties.
Assuntos
Lasers , Tomografia de Coerência Óptica/métodos , Artefatos , Fatores de TempoRESUMO
We demonstrate three-dimensional intravascular flow imaging compatible with routine clinical image acquisition workflow by means of megahertz (MHz) intravascular Doppler Optical Coherence Tomography (OCT). The OCT system relies on a 1.1 mm diameter motorized imaging catheter and a 1.5 MHz Fourier Domain Mode Locked (FDML) laser. Using a post processing method to compensate the drift of the FDML laser output, we can resolve the Doppler phase shift between two adjoining OCT A-line datasets. By interpretation of the velocity field as measured around the zero phase shift, the flow direction at specific angles can be qualitatively estimated. Imaging experiments were carried out in phantoms, micro channels, and swine coronary artery in vitro at a speed of 600 frames/s. The MHz wavelength sweep rate of the OCT system allows us to directly investigate flow velocity of up to 37.5 cm/s while computationally expensive phase-unwrapping has to be applied to measure such high speed using conventional OCT system. The MHz sweep rate also enables a volumetric Doppler imaging even with a fast pullback at 40 mm/s. We present the first simultaneously recorded 3D morphological images and Doppler flow profiles. Flow pattern estimation and three-dimensional structural reconstruction of entire coronary artery are achieved using a single OCT pullback dataset.
Assuntos
Vasos Coronários , Tomografia de Coerência Óptica , Animais , Vasos Coronários/diagnóstico por imagem , Imageamento Tridimensional , Lasers , Imagens de Fantasmas , SuínosRESUMO
We report on the highly efficient non-linear optical frequency conversion of the wavelength swept output from a Fourier Domain Mode Locked (FDML) laser. Different concepts for power scaling of FDML lasers by post-amplification with active fibers are presented. A two-stage post-amplification of an FDML laser with an amplification factor of 300 up to a peak power of 1.5 W is used to supply sufficient power levels for non-linear conversion. Using a single-mode dispersion shifted fiber (DSF), we convert this amplified output that covers the region between 1541 nm and 1545 nm to a wavelength range from 1572 nm to 1663 nm via modulation instability (MI). For this four wave mixing process we observe an efficiency of approximately 40%. The anti-Stokes signal between 1435 nm and 1516 nm was observed with lower conversion efficiency. In addition to shifting the wavelength, the effect of MI also enables a substantial increase in the wavelength sweep rate of the FDML laser by a factor of approximately 50 to 0.55 nm/ns.
RESUMO
We present a new, alternative approach to realize a wavelength swept light source with no fundamental limit to sweep speed. Amplified spontaneous emission (ASE) light alternately passes a cascade of optical gain elements and tunable optical bandpass filters. We show that for high sweep speeds, the control signal for the different filters has to be applied with a defined, precise phase delay on the order of nanoseconds, to compensate for the light propagation time between the filters and ensure optimum operation. At a center wavelength of 1300 nm sweep rates of 10 kHz, 100 kHz and 340 kHz over a sweep range of 100 nm full width and an average power of 50 mW are demonstrated. For application in optical coherence tomography (OCT), an axial resolution of 12 microm (air), a sensitivity of 120 dB (50 mW) and a dynamic range of 50 dB are achieved and OCT imaging is demonstrated. Performance parameters like coherence properties and relative intensity noise (RIN) are quantified, discussed and compared to the performance of Fourier Domain Mode Locked (FDML) lasers. Physical models for the observed difference in performance are provided.
RESUMO
We present a novel method to measure the chromatic dispersion of fibers with lengths of several kilometers. The technique is based on a rapidly swept Fourier domain mode locked laser driven at 50kHz repetition rate. Amplitude modulation with 400MHz and phase analysis yield the dispersion values over a 130nm continuous wavelength tuning range covering C and L band. The high acquisition speed of 10micros for individual wavelength-resolved traces Deltat(lambda) can reduce effects caused by thermal drift and acoustic vibrations. It enables real-time monitoring with update rates >100Hz even when averaging several hundred acquisitions for improved accuracy.
Assuntos
Análise de Falha de Equipamento/instrumentação , Lasers , Fibras Ópticas , Refratometria/instrumentação , Análise de Falha de Equipamento/métodos , Refratometria/métodosRESUMO
We report on the effect of chromatic dispersion on coherence length and noise of Fourier Domain Mode Locked (FDML) lasers. An FDML laser with a sweep range of 100 nm around 1550 nm has been investigated. Cavity configurations with and without dispersion compensation have been analyzed using different widths of the intra-cavity optical band-pass filter. The measurements are compared to non-FDML wavelength swept laser sources. Based on these observations, a simple model is developed providing a connection between timing, photon cavity lifetime and characteristic time constant of the filter. In an optimized configuration, an instantaneous laser linewidth of 20 pm is observed, corresponding to a 10x narrowing compared to the intra-cavity optical bandpass filter. A relative intensity noise of -133 dBc/Hz or 0.2% at 100 MHz detection bandwidth during sweep operation is observed. For optimum operation, the filter drive frequency has to be set within 2 ppm or 120 mHz at 51 kHz.