RESUMO
BACKGROUND: There is a need to evaluate how the choice of time interval contributes to the lack of consistency of SDoH variables that appear as important to COVID-19 disease burden within an analysis for both case counts and death counts. METHODS: This study identified SDoH variables associated with U.S county-level COVID-19 cumulative case and death incidence for six different periods: the first 30, 60, 90, 120, 150, and 180 days since each county had COVID-19 one case per 10,000 residents. The set of SDoH variables were in the following domains: resource deprivation, access to care/health resources, population characteristics, traveling behavior, vulnerable populations, and health status. A generalized variance inflation factor (GVIF) analysis was used to identify variables with high multicollinearity. For each dependent variable, a separate model was built for each of the time periods. We used a mixed-effect generalized linear modeling of counts normalized per 100,000 population using negative binomial regression. We performed a Kolmogorov-Smirnov goodness of fit test, an outlier test, and a dispersion test for each model. Sensitivity analysis included altering the county start date to the day each county reached 10 COVID-19 cases per 10,000. RESULTS: Ninety-seven percent (3059/3140) of the counties were represented in the final analysis. Six features proved important for both the main and sensitivity analysis: adults-with-college-degree, days-sheltering-in-place-at-start, prior-seven-day-median-time-home, percent-black, percent-foreign-born, over-65-years-of-age, black-white-segregation, and days-since-pandemic-start. These variables belonged to the following categories: COVID-19 related, vulnerable populations, and population characteristics. Our diagnostic results show that across our outcomes, the models of the shorter time periods (30 days, 60 days, and 900 days) have a better fit. CONCLUSION: Our findings demonstrate that the set of SDoH features that are significant for COVID-19 outcomes varies based on the time from the start date of the pandemic and when COVID-19 was present in a county. These results could assist researchers with variable selection and inform decision makers when creating public health policy.
Assuntos
COVID-19 , Segregação Social , Adulto , COVID-19/epidemiologia , Humanos , Políticas , SARS-CoV-2 , Determinantes Sociais da Saúde , Estados Unidos/epidemiologiaRESUMO
Because of the extensive chemical, physical, and biomedical applications of parahydrogen, the need exists for the development of highly enriched parahydrogen in a robust and efficient manner. Herein, we present a parahydrogen enrichment equipment which substantially improves upon the previous generators with its ability to enrich parahydrogen to >98.5% and a production rate of up to 4 standard liters per minute with the added advantage of real-time quantification. Our generator employs a pulsed injection system with a 3/16 in. outside diameter copper spiral tubing filled with iron-oxide catalyst. This tubing is mated to a custom-made copper attachment to provide efficient thermal coupling to the cold head. This device allows for robust operation at high pressures up to 34 atm. Real-time quantification by benchtop NMR spectroscopy is made possible by direct coupling of the p-H2 outlet from the generator to a 1.4 T NMR spectrometer using a regular 5 mm NMR tube that is continuously refilled with the exiting parahydrogen gas at â¼8 atm pressure. The use of high hydrogen gas pressure offers two critical NMR signal detection benefits: increased concentration and line narrowing. Our work presents a comprehensive description of the apparatus for a convenient and robust parahydrogen production, distribution, and quantification system, especially for parahydrogen-based hyperpolarization NMR research.
Assuntos
Hidrogênio , Imageamento por Ressonância Magnética , Catálise , Espectroscopia de Ressonância MagnéticaRESUMO
An open-source hyperpolarizer producing (13)C hyperpolarized contrast agents using parahydrogen induced polarization (PHIP) for biomedical and other applications is presented. This PHIP hyperpolarizer utilizes an Arduino microcontroller in conjunction with a readily modified graphical user interface written in the open-source processing software environment to completely control the PHIP hyperpolarization process including remotely triggering an NMR spectrometer for efficient production of payloads of hyperpolarized contrast agent and in situ quality assurance of the produced hyperpolarization. Key advantages of this hyperpolarizer include: (i) use of open-source software and hardware seamlessly allowing for replication and further improvement as well as readily customizable integration with other NMR spectrometers or MRI scanners (i.e., this is a multiplatform design), (ii) relatively low cost and robustness, and (iii) in situ detection capability and complete automation. The device performance is demonstrated by production of a dose (â¼2-3 mL) of hyperpolarized (13)C-succinate with %P13C â¼ 28% and 30 mM concentration and (13)C-phospholactate at %P13C â¼ 15% and 25 mM concentration in aqueous medium. These contrast agents are used for ultrafast molecular imaging and spectroscopy at 4.7 and 0.0475 T. In particular, the conversion of hyperpolarized (13)C-phospholactate to (13)C-lactate in vivo is used here to demonstrate the feasibility of ultrafast multislice (13)C MRI after tail vein injection of hyperpolarized (13)C-phospholactate in mice.
Assuntos
Meios de Contraste/metabolismo , Hidrogênio/química , Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética , Animais , Automação , Isótopos de Carbono/química , Catálise , Meios de Contraste/química , Ácido Láctico/metabolismo , Camundongos , Camundongos Nus , Software , Succinatos/química , Succinatos/metabolismo , Água/químicaRESUMO
With continuing hardware and pulse sequence advancements, modern MRI is gaining sensitivity to signals from short-T(2) (1)H species under practical experimental conditions. However, conventional MRI coils are typically not designed for this type of application, as they often contain proton-rich construction materials that may contribute confounding (1)H background signal during short-T(2) measurements. An example of this is shown herein. Separately, a loop-gap style coil was used to compare different coil construction materials and configurations with respect to observed (1)H background signal sizes in a small animal imaging system. Background signal sources were spatially identified and quantified in a number of different coil configurations. It was found that the type and placement of structural coil materials around the loop-gap resonator, as well as the coil's shielding configuration, are critical determinants of the coil's background signal size. Although this study employed a loop-gap resonator design, these findings are directly relevant to standard volume coils commonly used for MRI.
Assuntos
Fêmur/anatomia & histologia , Imageamento por Ressonância Magnética/instrumentação , Cadáver , Cobre , Desenho de Equipamento , Humanos , Imageamento Tridimensional , Cimento de Policarboxilato , Politetrafluoretileno , Ondas de RádioRESUMO
Applications of parahydrogen induced polarization (PHIP) often warrant conversion of the chemically-synthesized singlet-state spin order into net heteronuclear magnetization. In order to obtain optimal yields from the overall hyperpolarization process, catalytic hydrogenation must be tightly synchronized to subsequent radiofrequency (RF) transformations of spin order. Commercial NMR consoles are designed to synchronize applied waves on multiple channels and consequently are well-suited as controllers for these types of hyperpolarization experiments that require tight coordination of RF and non-RF events. Described here is a PHIP instrument interfaced to a portable NMR console operating with a static field electromagnet in the milliTesla regime. In addition to providing comprehensive control over chemistry and RF events, this setup condenses the PHIP protocol into a pulse-program that in turn can be readily shared in the manner of traditional pulse sequences. In this device, a TTL multiplexer was constructed to convert spectrometer TTL outputs into 24 VDC signals. These signals then activated solenoid valves to control chemical shuttling and reactivity in PHIP experiments. Consolidating these steps in a pulse-programming environment speeded calibration and improved quality assurance by enabling the B0/B1 fields to be tuned based on the direct acquisition of thermally polarized and hyperpolarized NMR signals. Performance was tested on the parahydrogen addition product of 2-hydroxyethyl propionate-1-13C-d3, where the 13C polarization was estimated to be P13C=20±2.5% corresponding to 13C signal enhancement approximately 25 million-fold at 9.1 mT or approximately 77,000-fold 13C enhancement at 3 T with respect to thermally induced polarization at room temperature.
Assuntos
Espectroscopia de Ressonância Magnética/métodos , Imãs , Campos Eletromagnéticos , Hidrogênio/química , Hidrogenação , Espectroscopia de Ressonância Magnética/instrumentação , Ondas de Rádio , Reprodutibilidade dos TestesRESUMO
OBJECTIVE: Newborns requiring hospitalisation frequently undergo painful procedures. Prevention of pain in infants is of prime concern because of adverse associations with physiological and neurological development. However, pain mitigation is currently guided by behavioural observation assessments that have not been validated against direct evidence of pain processing in the brain. The aim of this study was to determine whether cry presence or amplitude is a valid indicator of pain processing in newborns. DESIGN: Prospective observational cohort. SETTING: Newborn nursery. PATIENTS: Healthy infants born at >37 weeks and <42 weeks gestation. INTERVENTIONS: We prospectively studied newborn cortical responses to light touch, cold and heel stick, and the amplitude of associated infant vocalisations using our previously published paradigms of time-locked electroencephalogram (EEG) with simultaneous audio recordings. RESULTS: Latencies of cortical peak responses to each of the three stimuli type were significantly different from each other. Of 54 infants, 13 (24%), 19 (35%) and 35 (65%) had cries in response to light touch, cold and heel stick, respectively. Cry in response to non-painful stimuli did not predict cry in response to heel stick. All infants with EEG data had measurable pain responses to heel stick, whether they cried or not. There was no association between presence or amplitude of cries and cortical nociceptive amplitudes. CONCLUSIONS: In newborns with distinct brain responses to light touch, cold and pain, cry presence or amplitude characteristics do not provide adequate behavioural markers of pain signalling in the brain. New bedside assessments of newborn pain may need to be developed using brain-based methodologies as benchmarks in order to provide optimal pain mitigation.
Assuntos
Choro , Eletroencefalografia , Potenciais Somatossensoriais Evocados , Percepção da Dor , Percepção do Tato , Estudos de Coortes , Temperatura Baixa , Feminino , Calcanhar , Humanos , Recém-Nascido , Masculino , FlebotomiaRESUMO
BACKGROUND: MR-guided focused ultrasound or high-intensity focused ultrasound (MRgFUS/MRgHIFU) is a non-invasive therapeutic modality with many potential applications in areas such as cancer therapy, drug delivery, and blood-brain barrier opening. However, the large financial costs involved in developing preclinical MRgFUS systems represent a barrier to research groups interested in developing new techniques and applications. We aim to mitigate these challenges by detailing a validated, open-source preclinical MRgFUS system capable of delivering thermal and mechanical FUS in a quantifiable and repeatable manner under real-time MRI guidance. METHODS: A hardware and software package was developed that includes closed-loop feedback controlled thermometry code and CAD drawings for a therapy table designed for a preclinical MRI scanner. For thermal treatments, the modular software uses a proportional integral derivative controller to maintain a precise focal temperature rise in the target given input from MR phase images obtained concurrently. The software computes the required voltage output and transmits it to a FUS transducer that is embedded in the delivery table within the magnet bore. The delivery table holds the FUS transducer, a small animal and its monitoring equipment, and a transmit/receive RF coil. The transducer is coupled to the animal via a water bath and is translatable in two dimensions from outside the magnet. The transducer is driven by a waveform generator and amplifier controlled by real-time software in Matlab. MR acoustic radiation force imaging is also implemented to confirm the position of the focus for mechanical and thermal treatments. RESULTS: The system was validated in tissue-mimicking phantoms and in vivo during murine tumor hyperthermia treatments. Sonications were successfully controlled over a range of temperatures and thermal doses for up to 20 min with minimal temperature overshoot. MR thermometry was validated with an optical temperature probe, and focus visualization was achieved with acoustic radiation force imaging. CONCLUSIONS: We developed an MRgFUS platform for small-animal treatments that robustly delivers accurate, precise, and controllable sonications over extended time periods. This system is an open source and could increase the availability of low-cost small-animal systems to interdisciplinary researchers seeking to develop new MRgFUS applications and technology.
RESUMO
[This corrects the article DOI: 10.1186/s40349-016-0066-7.].
RESUMO
In this work we describe a large volume 340 mL (1)H-X magnetic resonance (MR) probe for studies of hyperpolarized compounds at 0.0475 T. (1)H/(13)C and (1)H/(15)N probe configurations are demonstrated with the potential for extension to (1)H/(129)Xe. The primary applications of this probe are preparation and quality assurance of (13)C and (15)N hyperpolarized contrast agents using PASADENA (parahydrogen and synthesis allow dramatically enhanced nuclear alignment) and other parahydrogen-based methods of hyperpolarization. The probe is efficient and permits 62 µs (13)C excitation pulses at 5.3 W, making it suitable for portable operation. The sensitivity and detection limits of this probe, tuned to (13)C, are compared with a commercial radio frequency (RF) coil operating at 4.7 T. We demonstrate that low field MR of hyperpolarized contrast agents could be as sensitive as conventional high field detection and outline potential improvements and optimization of the probe design for preclinical in vivo MRI. PASADENA application of this low-power probe is exemplified with (13)C hyperpolarized 2-hydroxyethyl propionate-1-(13)C,2,3,3-d(3).