RESUMO
Producing heterostructures of cesium lead halide perovskites and metal-chalcogenides in the form of colloidal nanocrystals can improve their optical features and stability, and also govern the recombination of charge carriers. Herein, the synthesis of red-emitting CsPbI3/ZnSe nanoheterostructures is reported via an in situ hot injection method, which provides the crystallization conditions for both components, subsequently leading to heteroepitaxial growth. Steady-state absorption and photoluminescence studies alongside X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy analysis evidence on a type-I band alignment for CsPbI3/ZnSe nanoheterostructures, which exhibit photoluminescence quantum yield of 96% due to the effective passivation of surface defects, and an enhancement in carrier lifetime. Furthermore, the heterostructure growth of ZnSe domains leads to significant improvement in the stability of the CsPbI3 nanocrystals under ambient conditions and against thermal and UV irradiation stress.
RESUMO
Integration of photovoltaic (PV) and electroluminescent (EL) functions and/or units in one device is attractive for new generation optoelectronic devices but it is challenging to achieve highly comprehensive efficiency. Herein, perovskite solar cells (PSCs) are fabricated, assisted by 3-sulfopropyl methacrylate potassium salt (SPM) additive to tackle this issue. SPMs not only induce large grain size during the film formation but also produce a secondary phase of 2D K2 PbI4 to passivate the grain boundaries (GBs). In addition, its sulfonic acid group and potassium ion can coordinate to lead ion and fill the interstitial defects, respectively. Thus, SPM reduces the defective states and suppresses nonradiative recombination loss. As a result, planar PSC delivers a power conversion efficiency of ≈22%, with a maximum open-circuit voltage (Voc ) of 1.20 V. The Voc is 94% of the radiative Voc limit (1.28 V), higher than the control device (Voc of 1.12 V). In addition, the reciprocity between PV and EL is also correlated to quantify the energy losses and understand the device physics. When operated as a light-emitting diode, the maximum EL external quantum efficiency (EQEEL ) is up to 12.2% (EQEEL of 10.7% under an injection current of short-circuit photocurrent), thus leading to high-performance PV/EL dual functions.
RESUMO
Integrating highly efficient photovoltaic (PV) function into light-emitting diodes (LEDs) for multifunctional display is of great significance for compact low-power electronics, but it remains challenging. Herein, it is demonstrated that solution engineered perovskite nanocrystals (PNCs, ≈100 nm) enable efficient electroluminescence (EL) and PV performance within a single device through tailoring the dispersity and interface. It delivers the maximum brightness of 490 W sr-1 m-2 at 2.7 V and 23.2% EL external quantum efficiency, a record value for near-infrared perovskite LED, as well as 15.23% PV efficiency, among the highest value for nanocrystal perovskite solar cells. The PV-EL performance is well in line with the reciprocity relation. These all-solution-processed PV-LED devices open up viable routes to a variety of advanced applications, from touchless interactive screens to energy harvesting displays and data communication.
RESUMO
All-inorganic copper(I)-based metal halides have emerged as promising candidates for the replacement of lead perovskites because of their outstanding optical properties. However, the limited structure tunability prohibits their further exploration of properties including red photoluminescence (PL). Here, we report a series of red-emissive lead-free hybrid organic-inorganic copper halides A6(C4H8OS)12[Cu8X13][Cu4X4(OH)(H2O)] (ACX-THTO, A = K, Rb, and Cs; X = Cl, Br; THTO = C4H8OS) with the highest photoluminescence quantum yield (PLQY) of 42%. These compounds possess similar crystal structures, and their emission can be tuned in the spectral range of 676-732 nm by controlling their compositions. Additionally, by removing and adding THTO, the reversible transformation between CsCu2Br3 featuring one-dimensional (1D) chains and Cs6(C4H8OS)12[Cu8Br13][Cu4Br4(OH)(H2O)] (CCB-THTO) with zero-dimensional (0D) clusters can be realized. We also demonstrate that the incorporation of THTO in the crystal structures instead of dimethyl sulfoxide (DMSO) can significantly enhance the stability and PL of compounds with the same inorganic components.
RESUMO
Central π-core engineering of non-fullerene small molecule acceptors (NF-SMAs) is effective in boosting the performance of organic solar cells (OSCs). Especially, selenium (Se) functionalization of NF-SMAs is considered a promising strategy but the structure-performance relationship remains unclear. Here, we synthesize two isomeric alkylphenyl-substituted selenopheno[3,2-b]thiophene-based NF-SMAs named mPh4F-TS and mPh4F-ST with different substitution positions, and contrast them with the thieno[3,2-b]thiophene-based analogue, mPh4F-TT. When placing Se atoms at the outer positions of the π-core, mPh4F-TS shows the most red-shifted absorption and compact molecular stacking. The PM6 : mPh4F-TS devices exhibit excellent absorption, high charge carrier mobility, and reduced energy loss. Consequently, PM6 : mPh4F-TS achieves more balanced photovoltaic parameters and yields an efficiency of 18.05 %, which highlights that precisely manipulating selenium functionalization is a practicable way toward high-efficiency OSCs.
RESUMO
Due to the fast dynamics and re-equilibration of supramolecular self-assembly, bottom-up molecular strategies to fabricate well-defined and controllable multiblock structures are rare. Herein, we propose a new concept for fabrication of fluorescent multiblock microcolumns containing 1 to 7 blocks via hierarchical supramolecular self-assembly based on cucurbit[8]uril (CB[8]), NaBr and an AIEgen guest. Through the complexation between CB[8] and different numbers of AIEgen guests (2, 1, 0), the competitive displacement caused by the binding of the sodium cation to the CB[8] portal, and the reversible assembly of positively charged guests in salt solutions, one-pot hierarchical supramolecular self-assembly is realized. The molecular structure of each block is analyzed by single-crystal X-ray diffraction. The AIEgen enables the self-assembly of multiblocks to be visualized, understood, and regulated.
Assuntos
Hidrocarbonetos Aromáticos com Pontes , Imidazóis , Hidrocarbonetos Aromáticos com Pontes/química , Imidazóis/química , Estrutura Molecular , Cristalografia por Raios X , ÍonsRESUMO
The traditional design strategies for highly bright solid-state luminescent materials rely on weakening the intermolecular π-π interactions, which may limit diversity when developing new materials. Herein, we propose a strategy of tuning the molecular packing mode by regioisomerization to regulate the solid-state fluorescence. TBP-e-TPA with a molecular rotor in the end position of a planar core adopts a long-range cofacial packing mode, which in the solid state is almost non-emissive. By shifting molecular rotors to the bay position, the resultant TBP-b-TPA possesses a discrete cross packing mode, giving a quantum yield of 15.6±0.2 %. These results demonstrate the relationship between the solid-state fluorescence efficiency and the molecule's packing mode. Thanks to the good photophysical properties, TBP-b-TPA nanoparticles were used for two-photon deep brain imaging. This molecular design philosophy provides a new way of designing highly bright solid-state fluorophores.
Assuntos
Compostos de Anilina/química , Corantes Fluorescentes/química , Fenazinas/química , Tiofenos/química , Compostos de Anilina/efeitos da radiação , Animais , Encéfalo/diagnóstico por imagem , Corantes Fluorescentes/efeitos da radiação , Células HeLa , Humanos , Isomerismo , Camundongos , Microscopia Confocal , Microscopia de Fluorescência , Nanopartículas/química , Nanopartículas/efeitos da radiação , Fenazinas/efeitos da radiação , Fótons , Tiofenos/efeitos da radiaçãoRESUMO
Acrylonitriles with aggregation-induced emission (AIE) characteristics have been found to show promising applications in two-photon biomedical imaging. Generally, elaborate synthetic efforts are required to achieve different acrylonitriles with distinct functionalities. In this work, we first reported the synthesis of two different group-functionalized AIE-active acrylonitriles (TPAT-AN-XF and 2TPAT-AN) obtained simply by mixing the same reactants at different temperatures using a facile and transition metal-free synthetic method. These two AIE luminogens (AIEgens) exhibit unique properties such as bright red emission in the solid state, large Stokes shift, and large two-photon absorption cross section. Water-soluble nanoparticles (NPs) of 2TPAT-AN were prepared by a nanoprecipitation method. In vitro imaging data show that 2TPAT-AN NPs can selectively stain lysosome in live cells. Besides one-photon imaging, remarkable two-photon imaging of live tumor tissues can be achieved with high resolution and deep tissue penetration. 2TPAT-AN NPs show high biocompatibility and are successfully utilized in in vivo long-term imaging of mouse tumors with a high signal-to-noise ratio. Thus, the present work is anticipated to shed light on the preparation of a library of AIE-active functionalized acrylonitriles with intriguing properties for biomedical applications.
Assuntos
Acrilonitrila/química , Corantes Fluorescentes/química , Imagem Óptica , Fótons , Acrilonitrila/síntese química , Corantes Fluorescentes/síntese química , Estrutura MolecularRESUMO
A compact, efficient, and monolithically grown III-V laser source provides an attractive alternative to bonding off-chip lasers for Si photonics research. Although recent demonstrations of microlasers on (001) Si wafers using thick metamorphic buffers are encouraging, scaling down the laser footprint to nanoscale and operating the nanolasers at telecom wavelengths remain significant challenges. Here, we report a monolithically integrated in-plane InP/InGaAs nanolaser array on (001) silicon-on-insulator (SOI) platforms with emission wavelengths covering the entire C band (1.55 µm). Multiple InGaAs quantum wells are embedded in high-quality InP nanoridges by selective-area growth on patterned (001) SOI. Combined with air-cladded InP/Si optical cavities, room-temperature operation at multiple telecom bands is obtained by defining different cavity lengths with lithography. The demonstration of telecom-wavelength monolithic nanolasers on (001) SOI platforms presents an important step towards fully integrated Si photonics circuits.
RESUMO
Compared to the conventional perovskite solar cells (PSCs) containing hole-transport materials (HTM), carbon materials based HTM-free PSCs (C-PSCs) have often suffered from inferior power conversion efficiencies (PCEs) arising at least partially from the inefficient hole extraction at the perovskite-carbon interface. Here, we show that boron (B) doping of multiwalled carbon nanotubes (B-MWNTs) electrodes are superior in enabling enhanced hole extraction and transport by increasing work function, carrier concentration, and conductivity of MWNTs. The C-PSCs prepared using the B-MWNTs as the counter electrodes to extract and transport hole carriers have achieved remarkably higher performances than that with the undoped MWNTs, with the resulting PCE being considerably improved from 10.70% (average of 9.58%) to 14.60% (average of 13.70%). Significantly, these cells show negligible hysteretic behavior. Moreover, by coating a thin layer of insulating aluminum oxide (Al2O3) on the mesoporous TiO2 film as a physical barrier to substantially reduce the charge losses, the PCE has been further pushed to 15.23% (average 14.20%). Finally, the impressive durability and stability of the prepared C-PSCs were also testified under various conditions, including long-term air exposure, heat treatment, and high humidity.
RESUMO
π-Bonds connected with aromatic rings were generally believed as the standard structures for constructing highly efficient fluorophores. Materials without these typical structures, however, exhibited only low fluorescence quantum yields and emitted in the ultraviolet spectral region. In this work, three molecules, namely bis(2,4,5-trimethylphenyl)methane, 1,1,2,2-tetrakis(2,4,5-trimethylphenyl)ethane, and 1,1,2,2-tetraphenylethane, with nonconjugated structures and isolated phenyl rings were synthesized and their photophysical properties were systematically investigated. Interestingly, the emission spectra of these three molecules could be well extended to 600 nm with high solid-state quantum yields of up to 70%. Experimental and theoretical analyses proved that intramolecular through-space conjugation between the "isolated" phenyl rings played an important role for this abnormal phenomenon.
RESUMO
Circularly-polarized luminescence (CPL) has received new attention on the rise of applications to generate devices and biologically active probes. These applications require fluorophores that are not only chiral but also provide strong fluorescence intensity in aggregated state. Thus, a new research branch has opened up a few years ago, which allows CPL-active fluorophores to be emissive in aggregated-state. As a result, reports on the combination of the CPL property with the aggregation-induced emission (AIE) phenomenon have emerged. Herein the early design principles that have been reported until now to generate CPL-active AIE-active fluorophores (AIEgens) are summarized. In this regard the alignment of monomeric emitters in a chiral fashion, either in supramolecules, polymers or liquid crystals has been proven to be a successful approach. Additionally, first reports have appeared that demonstrate how to tackle the daunting task to furnish individual CPL-active AIEgens.
Assuntos
Luminescência , Imagem Óptica/métodos , Corantes Fluorescentes/química , Cristais Líquidos/química , Medições Luminescentes/métodos , Polímeros/química , EstereoisomerismoRESUMO
By introducing chiral leucine pendants to silole scaffold, leucine-containing silole (Silole-Leu) is synthesized and it is endowed with not only aggregation-induced emission and circular dichroism, but excellent chiral polarized luminescence as well. Silole-Leu also has the capacity to self-assemble into nano/micro helical luminescent fibers and the dimension of the fibers can be tuned by adjusting the ratio and volume of mixed solvents for evaporation as revealed by atomic force microscope, scanning electron microscope, and fluorescence microscope. The characteristic helicity of microfibers is directly visualized for the first time by using fluorescence microscope.
Assuntos
Química Click/métodos , Leucina/química , Substâncias Luminescentes/química , Silanos/química , Luminescência , Substâncias Luminescentes/síntese química , Medições Luminescentes , EstereoisomerismoRESUMO
A series of newly synthesized dicyanoplatinum(II) 2,2'-bipyridine complexes exhibits self-assembly properties in solution after the incorporation of the l-valine amino units appended with various hydrophobic motifs. These l-valine-derived substituents were found to have critical control over the aggregation behaviors of the complexes in the solution state. On one hand, one of the complexes was found to exhibit interesting circularly polarized luminescence (CPL) signals at low temperature due to the formation of chiral spherical aggregates in the temperature-dependent studies. On the other hand, systematic transformation from less uniform aggregates to well-defined fibrous and rod-like structures via Ptâ â â Pt and π-π stacking interactions has also been observed in the mixed-solvent studies. These changes were monitored by UV/Vis absorption, emission, circular dichroism (CD), and CPL spectroscopies, and morphologies were studied by electron microscopy.
RESUMO
We present a nitrogen-containing polycyclic aromatic hydrocarbon (N-PAH), namely 12-methoxy-9-(4-methoxyphenyl)-5,8-diphenyl-4-(pyridin-4-yl)pyreno[1,10,9-h,i,j]isoquinoline (c-TPE-ON), which exhibits high quantum-yield emission both in solution (blue) and in the solid state (yellow). This molecule was unexpectedly obtained by a three-fold, highly regioselective photocyclodehydrogenation of a tetraphenylethylene-derived AIEgen. Based on manifold approaches involving UV/Vis, photoluminescence, and NMR spectroscopy as well as HRMS, we propose a reasonable mechanism for the formation of the disk-like N-PAH that is supported by density functional theory calculations. In contrast to most PAHs that are commonly used, our system does not suffer from entire fluorescence quenching in the solid state due to the peripheral aromatic rings preventing π-π stacking interactions, as evidenced by single-crystal X-ray analysis. Moreover, its rod-like microcrystals exhibit excellent optical waveguide properties. Hence, c-TPE-ON comprises a N-PAH with unprecedented luminescent properties and as such is a promising candidate for fabricating organic optoelectronic devices. Our design and synthetic strategy might lead to a more general approach to the preparation of solution- and solid-state luminescent PAHs.
RESUMO
In this contribution, we finely tuned the singlet-triplet energy gap (ΔEST) of AIE-active materials to modulate their fluorescence, phosphorescence and delay fluorescence via rational molecular design and investigated the possible ways to harvest their triplet energy in OLEDs. Noteworthily, two molecules o-TPA-3TPE-o-PhCN and o-TPA-3TPE-p-PhCN with larger ΔEST values (0.59 eV and 0.45 eV, respectively) emitted efficient long-lived low temperature phosphorescence in their glassy solutions and exhibited efficient crystallization-induced room temperature phosphorescence (RTP). Meanwhile, it was the first time to observe a novel crystallization-induced delay fluorescence phenomenon in another AIE-active molecule p-TPA-3TPE-p-PhCN owing to its very small ΔEST value (0.21 eV). It was also found that molecules with various ΔEST values showed significantly different temperature sensitivity. Non-doped electroluminescent (EL) devices using these molecules as light-emitting layers were fabricated, exhibiting external quantum efficiencies (EQE) higher than theoretical values of purely singlet emitter type devices. Particularly, p-TPA-3TPE-p-PhCN showed outstanding device performances with high luminance and efficiencies up to 36,900 cd m(-2), 11.2 lm W(-1), 12.8 cd A(-1) and 4.37%, respectively, considering that its solid-state quantum yield was only 42%. All the above observations suggested that tuning the ΔEST values of AIE materials is a powerful methodology to generate many more interesting and meaningful optoelectronic properties.
Assuntos
Crisenos/química , Fluorescência , Semicondutores , Temperatura , Cristalização , Transporte de Elétrons , Modelos Moleculares , Conformação Molecular , Teoria QuânticaRESUMO
In this paper, a simple strategy to change the emission behaviour of luminogenic materials was developed. Tetraphenylethene (TPE)-functionalised benzothiazolium salts with different counteranions (TPEBe-X; X=I(-), ClO(4)(-) and PF(6)(-)) were designed and synthesised. All the luminogens show weak red emission in the solution state that originates from intramolecular charge transfer from TPE to the benzothiazolium unit. Whereas aggregate formation enhances the light emission of TPEBe-ClO(4) and TPEBe-PF(6), that of TPEBe-I is quenched, thus demonstrating the phenomena of aggregation-induced emission and aggregation-caused quenching. TPEBe-I works as a light-up fluorescent sensor for Hg(2+) in aqueous solution with high sensitivity and specificity owing to the elimination of the emission quenching effect of the iodide ion by the formation of HgI(2) as well as the induction in aggregate formation by the complexation of Hg(2+) with the S atom of the benzothiazolium unit of TPEBe-I. A solid film of TPEBe-I was prepared that can monitor the level of Hg(2+) in aqueous solution with a detection limit of 1 µM.
Assuntos
Corantes Fluorescentes/química , Mercúrio/análise , Benzotiazóis/química , Cristalografia por Raios X , Iodetos/química , Íons/química , Conformação Molecular , Espectrometria de Fluorescência , Água/químicaRESUMO
Lead-free low-dimensional organic-inorganic metal halides have gained increasing attention in a wide range of applications due to their low toxicity, outstanding optical performance, and structural tunability. In this work, a general method of incorporating organic molecule into sodium antimony bromides is introduced. The 1D Na3SbBr6(C2H6OS)6 and Na3SbBr6(C4H8OS)6 single crystals exhibit bright yellow and orange emission with PL peaks at 610 and 664 nm, and high photoluminescence quantum yields (PLQYs) of 85% and 60%, respectively. These two compounds can be reversibly converted into each other by the removal and addition of the organic components. Their exceptional luminescent performance enables them to be used as solid-state phosphors for the fabrication of yellow and orange down-conversion LEDs. A white LED with a high color rendering index (CRI) of 95 is also fabricated by using Na3SbBr6(C2H6OS)6 as the yellow phosphor. The universality of this method is demonstrated by synthesizing other members of this family with diverse A-groups, including methylammonium (MA) and formamidinium (FA). This work provides an effective strategy for the development of diverse lead-free and high-performance organic-inorganic hybrid materials and indicates these organic-inorganic hybrid compounds are promising luminescent materials for lighting or displays.
RESUMO
Dielectric constant of non-fullerene acceptors plays a critical role in organic solar cells in terms of exciton dissociation and charge recombination. Current acceptors feature a dielectric constant of 3-4, correlating to relatively high recombination loss. We demonstrate that selenium substitution on acceptor central core can effectively modify molecule dielectric constant. The corresponding blend film presents faster hole-transfer of ~5 ps compared to the sulfur-based derivative (~10 ps). However, the blends with Se-acceptor also show faster charge recombination after 100 ps upon optical pumping, which is explained by the relatively disordered stacking of the Se-acceptor. Encouragingly, dispersing the Se-acceptor in an optimized organic solar cell system can interrupt the disordered aggregation while still retain high dielectric constant. With the improved dielectric constant and optimized fibril morphology, the ternary device exhibits an obvious reduction of non-radiative recombination to 0.221 eV and high efficiency of 19.0%. This work unveils heteroatom-substitution induced dielectric constant improvement, and the associated exciton dynamics and morphology manipulation, which finally contributes to better material/device design and improved device performance.
RESUMO
The bottom contact in perovskite solar cells (PSCs) is easy to cause deep trap states and severe instability issues, especially under maximum power point tracking (MPPT). In this study, sodium gluconate (SG) is employed to disperse tin oxide (SnO2) nanoparticles (NPs) and regulate the interface contact at the buried interface. The SG-SnO2 electron transfer layer (ETL) enabled the deposition of pinhole-free perovskite films in ambient air and improved interface contact by bridging effect. SG-SnO2 PSCs achieved an impressive power conversion efficiency (PCE) of 25.34% (certified as 25.17%) with a high open-circuit voltage (VOC) exceeding 1.19 V. The VOC loss is less than 0.34 V relative to the 1.53 eV bandgap, and the fill factor (FF) loss is only 2.02% due to the improved contact. The SG-SnO2 PSCs retained around 90% of their initial PCEs after 1000 h operation (T90 = 1000 h), higher than T80 = 1000 h for the control SnO2 PSC. Microstructure analysis revealed that light-induced degradation primarily occurred at the buried holes and grain boundaries and highlighted the importance of bottom-contact engineering.