RESUMO
In this work, a single-crystalline silicon nanobelt field-effect transistor (SiNB FET) device was developed and applied to pH and biomolecule sensing. The nanobelt was formed using a local oxidation of silicon technique, which is a self-aligned, self-shrinking process that reduces the cost of production. We demonstrated the effect of buffer concentration on the sensitivity and stability of the SiNB FET sensor by varying the buffer concentrations to detect solution pH and alpha fetoprotein (AFP). The SiNB FET sensor was used to detect a solution pH ranging from 6.4 to 7.4; the response current decreased stepwise as the pH value increased. The stability of the sensor was examined through cyclical detection under solutions with different pH; the results were stable and reliable. A buffer solution of varying concentrations was employed to inspect the sensing capability of the SiNB FET sensor device, with the results indicating that the sensitivity of the sensor was negatively dependent on the buffer concentration. For biomolecule sensing, AFP was sensed to test the sensitivity of the SiNB FET sensor. The effectiveness of surface functionalization affected the AFP sensing result, and the current shift was strongly dependent on the buffer concentration. The obtained results demonstrated that buffer concentration plays a crucial role in terms of the sensitivity and stability of the SiNB FET device in chemical and biomolecular sensing.
Assuntos
Técnicas Biossensoriais , Silício , Transistores EletrônicosRESUMO
PURPOSE: The aim of the present study was to examine the osseointegration in low-density bone tissue for SLAffinity-treated implants with StemBios (SB) cell therapy. MATERIALS AND METHODS: The morphologies of SLAffinity-treated surfaces were characterized using scanning electron microscopy. In the animal model, implants were installed in the mandibular canine-premolar area of 12 miniature pigs. Each pig received 3 implants of machine, sand blasted, large grit, and acid etched, and SLAffinity-treated implants. In the clinical trial, 10 patients received 1 SLAffinity-treated implant in the maxilla in the posterior area and 1 patient with low bone tissue density received 2 SLAffinity-treated implants with SB cell therapy. Resonance frequency analysis and computed tomography were assessed monthly over the first 3 months after implant placement. RESULTS: The results demonstrated that surface treatment significantly affected early osseointegration in patients who received SB cell therapy. SB cell therapy transferred the stress caused by the implant more uniformly, and the stress decreased with healing time. SLAffinity-treated implants also proved clinically successful after the 3 months. CONCLUSION: The SLAffinity treatments enhanced osseointegration significantly, especially at early stages of bone tissue healing with SB cell therapy.
Assuntos
Implantação Dentária Endóssea/métodos , Implantes Dentários , Transplante de Células-Tronco/métodos , Adulto , Animais , Humanos , Microscopia Eletrônica de Varredura , Nanoestruturas , Propriedades de Superfície , Suínos , Porco MiniaturaRESUMO
Field-effect transistor (FET)-based biosensors are powerful analytical tools for detecting trace-specific biomolecules in diverse sample matrices, especially in the realms of pandemics and infectious diseases. The primary concern in applying these biosensors is their stability, a factor directly impacting the accuracy and reliability of sensing over extended durations. The risk of biosensor degradation is substantial, potentially jeopardizing the sensitivity and selectivity and leading to inaccurate readings, including the possibility of false positives or negatives. This paper delves into the documented degradation of silicon nanobelt FET (NBFET) biosensors induced by buffer solutions. The results highlight a positive correlation between immersion time and the threshold voltage of NBFET devices. Secondary ion mass spectrometry analysis demonstrates a gradual increase in sodium and potassium ion concentrations within the silicon as immersion days progress. This outcome is ascribed to the nanobelt's exposure to the buffer solution during the biosensing period, enabling ion penetration from the buffer into the silicon. This study emphasizes the critical need to address buffer-solution-induced degradation to ensure the long-term stability and performance of FET-based biosensors in practical applications.
Assuntos
Técnicas Biossensoriais , Nanofios , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Nanofios/química , Reprodutibilidade dos Testes , Silício/química , Transistores EletrônicosRESUMO
Stem cells are known for their potential to repair damaged tissues. The adhesion, growth and differentiation of stem cells are likely controlled by the surrounding microenvironment which contains both chemical and physical cues. Physical cues in the microenvironment, for example, nanotopography, were shown to play important roles in stem cell fate decisions. Thus, controlling stem cell behavior by nanoscale topography has become an important issue in stem cell biology. Nanotechnology has emerged as a new exciting field and research from this field has greatly advanced. Nanotechnology allows the manipulation of sophisticated surfaces/scaffolds which can mimic the cellular environment for regulating cellular behaviors. Thus, we summarize recent studies on nanotechnology with applications to stem cell biology, including the regulation of stem cell adhesion, growth, differentiation, tracking and imaging. Understanding the interactions of nanomaterials with stem cells may provide the knowledge to apply to cell-scaffold combinations in tissue engineering and regenerative medicine.
RESUMO
Within the heterogeneous tissue architecture, a comprehensive understanding of how cell shapes regulate cytoskeletal mechanics by adjusting focal adhesions (FAs) signals to correlate with the lineage commitment of mesenchymal stromal cells (MSCs) remains obscure. Here, via engineered extracellular matrices, we observed that the development of mature FAs, coupled with a symmetrical pattern of radial fiber bundles, appeared at the right-angle vertices in cells with square shape. While circular cells aligned the transverse fibers parallel to the cell edge, and moved them centripetally in a counter-clockwise direction, symmetrical bundles of radial fibers at the vertices of square cells disrupted the counter-clockwise swirling and bridged the transverse fibers to move centripetally. In square cells, the contractile force, generated by the myosin IIA-enriched transverse fibers, were concentrated and transmitted outwards along the symmetrical bundles of radial fibers, to the extracellular matrix through FAs, and thereby driving FA organization and maturation. The symmetrical radial fiber bundles concentrated the transverse fibers contractility inward to the linkage between the actin cytoskeleton and the nuclear envelope. The tauter cytoskeletal network adjusted the nuclear-actomyosin force balance to cause nuclear deformability and to increase nuclear translocation of the transcription co-activator YAP, which in turn modulated the switch in MSC commitment. Thus, FAs dynamically respond to geometric cues and remodel actin cytoskeletal network to re-distribute intracelluar tension towards the cell nucleus, and thereby controlling YAP mechanotransduction signaling in regulating MSC fate decision. STATEMENT OF SIGNIFICANCE: We decipher how cellular mechanics is self-organized depending on extracellular geometric features to correlate with mesenchymal stromal cell lineage commitment. In response to geometry constrains on cell morphology, symmetrical radial fiber bundles are assembled and clustered depending on the maturation state of focal adhesions and bridge with the transverse fibers, and thereby establishing the dynamic cytoskeletal network. Contractile force, generated by the myosin-IIA-enriched transverse fibers, is transmitted and dynamically drives the retrograde movement of the actin cytoskeletal network, which appropriately adjusts the nuclear-actomyosin force balance and deforms the cell nucleus for YAP mechano-transduction signaling in regulating mesenchymal stromal cell fate decision.
Assuntos
Actinas , Células-Tronco Mesenquimais , Actinas/metabolismo , Actomiosina/metabolismo , Mecanotransdução Celular , Forma Celular , Osteogênese , Diferenciação Celular , Fatores de Transcrição/metabolismoRESUMO
Silicon nanowire field effect transistor (NWFET) sensors have been demonstrated to have high sensitivity, are label free, and offer specific detection. This study explored the effect of nanowire dimensions on sensors' sensitivity. We used sidewall spacer etching to fabricate polycrystalline silicon NWFET sensors. This method does not require expensive nanoscale exposure systems and reduces fabrication costs. We designed transistor sensors with nanowires of various lengths and numbers. Hepatitis B surface antigen (HBsAg) was used as the sensing target to explore the relationships of nanowire length and number with biomolecule detection. The experimental results revealed that the sensor with a 3 µm nanowire exhibited high sensitivity in detecting low concentrations of HBsAg. However, the sensor reached saturation when the biomolecule concentration exceeded 800 fg/mL. Sensors with 1.6 and 5 µm nanowires exhibited favorable linear sensing ranges at concentrations from 800 ag/mL to 800 pg/mL. The results regarding the number of nanowires revealed that the use of few nanowires in transistor sensors increases sensitivity. The results demonstrate the effects of nanowire dimensions on the silicon NWFET biosensors.
Assuntos
Técnicas Biossensoriais , Vírus da Hepatite B/química , Nanofios , Silício/química , Antígenos de Superfície/análise , Antígenos de Superfície da Hepatite BRESUMO
The efficiency of DNA immobilization by using various surface cleaning methods is studied in this work. The degree of surface cleaning is evaluated by the surface tension measurement to reveal the contribution from the polar and apolar terms. The observation from the fluorescent microscope images indicates the effectiveness of surface clean by the acetone and ethanol mixtures, as well as the sulphuric acid and hydrogen peroxide mixtures. We also fabricate a series of back-gated, 60-nm nanowired (NW) field-effect transistor (FET) sensors for mutation gene detection by following the developed acetone and ethanol mixtures. Electrical properties of the NWFET sensor demonstrate the n-channel depletion characteristics. The current of the sensor is reduced once the attachment of negative charge molecules. The single-stranded capture DNA is chemically immobilized onto the surface of silicon NWFET by three-step reactions. The sensor surface demonstrates the great performance of current shift after the suitable cleaning. The NWFET sensor is successfully applied to detect the BRAF(V599E) mutation genes from the hybridized processes. The sensing behaviour estimated from the electrical signal reaches the femtomolar level.
Assuntos
DNA/genética , Nanofios , Propriedades de Superfície , Técnicas BiossensoriaisRESUMO
Calcium phosphate ceramics used in dentistry and orthopedics are some of the most valuable biomaterials, owing to their excellent osteoconduction, osteoinduction, and osseointegration. Osteoconduction and osteoinduction are critical targets for bone regeneration, and osseointegration is essential for any dental implantations. In this study, a hydroxyapatite (HAp) hybrid coating layer with the sequential release of bone morphogenetic protein 2 (BMP-2) was deposited onto an etched titanium substrate by electrochemical deposition. The resulting release of BMP-2 from Tiâ»HAp was assessed by immersing samples in a simulated buffer fluid solution. Through coculture, human osteosarcoma cell proliferation and alkaline phosphatase activity were assessed. The characteristics and effect on cell proliferation of the hybrid coatings were investigated for their functionality through X-ray diffraction (XRD) and cell proliferation assays. Findings revealed that -0.8 V vs. Ag/AgCl (3 M KCl) exhibited the optimal HAp properties and a successfully coated HAp layer. XRD confirmed the crystallinity of the deposited HAp on the titanium surface. Ti-0.8 V Tiâ»HAp co-coating BMP sample exhibited the highest cell proliferation efficiency and was more favorable for cell growth. A successful biocompatible hybrid coating with optimized redox voltage enhanced the osseointegration process. The findings suggest that this technique could have promising clinical applications to enhance the healing times and success rates of dental implantation.
RESUMO
INTRODUCTION: Dry-eye syndrome (DES) is a general eye disease. Eye drops are the common ophthalmological medication. However, the ocular barrier makes it difficult to attain high drug bioavailability. Nanomedicine is a promising alternative treatment for ocular diseases and may increase drug content in the affected eye. METHODS: To explore this potential, we constructed nanoparticles (NPs) containing an anti-inflammatory agent for DES treatment. The NPs were made of gelatin-epigallocatechin gallate (EGCG) with surface decoration by hyaluronic acid (HA) and designated "GEH". The particle size, surface charge, and morphology were evaluated. The in vitro biocompatibility and anti-inflammation effect of nanoparticles were assayed via culturing with human corneal epithelium cells (HCECs) and in vivo therapeutic effect was examined in a DES rabbit's model. RESULTS: The synthesized GEH NPs had a diameter of approximately 250 nm and were positively charged. A coculture experiment revealed that 20 µg/mL GEH was not cytotoxic to HCECs and that an EGCG concentration of 0.2 µg/mL downregulated the gene expression of IL1B and IL6 in inflamed HCECs. Large amounts of GEH NPs accumulated in the cytoplasm of HCECs and the ocular surfaces of rats and rabbits, indicating the advantage of GEH NPs for ocular delivery of medication. Twice-daily topical treatment with GEH NPs was performed in a rabbit model of DES. The ocular surface of GEH-treated rabbits displayed normal corneal architecture with no notable changes in inflammatory cytokine levels in the cornea lysate. The treatment improved associated clinical signs, such as tear secretion, and fluorescein staining recovered. CONCLUSION: We successfully produced GEH NPs with high affinity for HCECs and animal eyes. The treatment can be delivered as eye drops, which retain the drug on the ocular surface for a longer time. Ocular inflammation was effectively inhibited in DES rabbits. Therefore, GEH NPs are potentially valuable as a new therapeutic agent delivered in eye drops for treating DES.
Assuntos
Catequina/análogos & derivados , Síndromes do Olho Seco/tratamento farmacológico , Gelatina/química , Ácido Hialurônico/química , Inflamação/tratamento farmacológico , Nanopartículas/química , Soluções Oftálmicas/uso terapêutico , Animais , Catequina/farmacologia , Catequina/uso terapêutico , Sobrevivência Celular/efeitos dos fármacos , Citocinas/metabolismo , Modelos Animais de Doenças , Síndromes do Olho Seco/patologia , Células Epiteliais/efeitos dos fármacos , Epitélio Corneano/patologia , Humanos , Masculino , Nanopartículas/ultraestrutura , Soluções Oftálmicas/farmacologia , Tamanho da Partícula , Coelhos , Ratos , Sus scrofa , Lágrimas , Resultado do TratamentoRESUMO
Electrochemical-metallization-type resistive random access memories (ReRAMs) show promising performance as next-generation nonvolatile memory. In this paper, the Cu chemical displacement technique (CDT) is used to form the bottom electrode of ReRAM devices. Compared with conventional deposition methods, the Cu-CDT method has numerous advantages for ReRAM fabrication, including low cost, low temperature fabrication, and the provision of unconsolidated Cu film and large surface roughness. Moreover, the Cu-CDT method is a favorable candidate for overcoming the Cu etching problem and is thus suitable for fabricating ReRAM devices. Using this technique, the surface morphology of a thin Cu film can be easily controlled. The obtained results show that the electric fields during the Forming and SET operations decreased, and the on-state current increased in the RESET operation, as the Cu-CDT displacement time was increased. The Cu-CDT samples exhibited a low operation field, large memory window (>106), and excellent endurance switching cycle characteristics. Moreover, this paper proposes a model to explain the electrical characteristics of ReRAM, which are dependent on the surface morphology.
RESUMO
In this study, a high-performance TixZrySizO flash memory is demonstrated using a sol-gel spin-coating method and formed under a low annealing temperature. The high-efficiency charge storage layer is formed by depositing a well-mixed solution of titanium tetrachloride, silicon tetrachloride, and zirconium tetrachloride, followed by 60 s of annealing at 600°C. The flash memory exhibits a noteworthy hot hole trapping characteristic and excellent electrical properties regarding memory window, program/erase speeds, and charge retention. At only 6-V operation, the program/erase speeds can be as fast as 120:5.2 µs with a 2-V shift, and the memory window can be up to 8 V. The retention times are extrapolated to 106 s with only 5% (at 85°C) and 10% (at 125°C) charge loss. The barrier height of the TixZrySizO film is demonstrated to be 1.15 eV for hole trapping, through the extraction of the Poole-Frenkel current. The excellent performance of the memory is attributed to high trapping sites of the low-temperature-annealed, high-κ sol-gel film.
RESUMO
Well-defined, uniform, and large-area nanoscaled tips are of great interest for scanning probe microscopy and high-efficiency field emission. An ultra-sharp nanotip causes higher electrical field and, hence, improves the emission current. In this paper, a large-area and well-aligned ultra-sharp nanotip arrays by reactive ion etching and oxidation techniques are fabricated. The apex of nanotips can be further sharpened to reach 3-nm radius by subsequent oxidation and etching process. A schematic model to explain the formation of nanotip array is proposed. When increasing the etching time, the photoresist on top of the nanotip is also consumed, and the exposed silicon substrate is etched away to form the nanotip. At the end, the photoresist is consumed completely and a nanotip with pyramid-like shape is developed. The field emission property was measured, and the turn-on field and work function of the ultra-sharp nanotip was about 5.37 V/µm and 4.59 eV, respectively. A nanotip with an oxide layer capped on the sidewall is also fabricated in this paper. Comparing to the uncapped nanotip, the oxide-capped sample exhibits stable and excellent field emission property against environmental disturbance.
RESUMO
We have developed a silicon nanowire field-effect transistor (NWFET) that allows deoxyribonucleic acid (DNA) biosensing. The nanowire (NW) was fabricated on a silicon-on-insulator wafer to provide effective ohmic contact. The NWFET sensor displayed n-channel depletion characteristics. To demonstrate the sensing capacity of the NWFET, we employed the BRAF(V599E) mutation gene, which correlates to the occurrence of cancers, as the target DNA sequence. The threshold voltage of the NWFET increased when the mutation gene was hybridized with the capture DNA strands on the nanowire, and decreased to the original level after de-hybridization of the gene. The shift in the drain current-gate voltage (I(D)-V(G)) curves revealed that the electrical signal had a logarithmic relationship with respect to the concentration of the mutation gene of up to six orders of magnitude, with the detection limit in the sub-femtomolar level. The detection results of mismatched DNA sequences, including one- and five-base-mismatched DNA strands, could be distinguished from complementary DNA gene by this sensor. The excellent electrical results obtained using this label-free NWFET sensor suggest that such devices might be potentially useful tools for biological research and oncogene screening.