A Novel Decoupled Feature Pyramid Networks for Multi-Target Ship Detection.

The efficiency and accuracy of ship detection is of great significance to ship safety, harbor management, and ocean surveillance in coastal harbors. The main limitations of current ship detection methods lie in the complexity of application scenarios, the difficulty in diverse scales object detection, and the low efficiency of network training. In order to solve these problems, a novel multi-target ship detection method based on a decoupled feature pyramid algorithm (DFPN) is proposed in this paper. First, a feature decoupling module is introduced to separate ship contour features and position features from the multi-scale fused features, to overcome the problem of similar features in multi-target ships. Second, a feature pyramid structure combined with a gating attention module is constructed to improve the feature resolution of small ships by enhancing contour features and spatial semantic information. Finally, a feature pyramid-based multi-feature fusion algorithm is proposed to improve the adaptability of the network to changes in ship scale according to the contextual relationship of ship features. Experiments on the multi-target ship detection dataset showed that the proposed method increased by 6.3% mAP and 20 FPS higher than YOLOv4, 7.6% mAP and 36 FPS higher than Faster-R-CNN, 5% mAP and 36 FPS higher than Mask-R-CNN, and 4.1% mAP and 35 FPS higher than DetectoRS. The results demonstrate that the DFPN can detect multi-target ships in different scenes with high accuracy and a fast detection speed.

Effect evaluation of decentralized domestic sewage treatment facilities in rural areas - a case study of Nantong City, China.

Rural domestic sewage has the characteristics of large and scattered discharge, as well as complex components; thus, how to effectively and efficiently manage rural domestic sewage is a big challenge for policy makers. Current decentralized domestic sewage treatment facilities (DDSTF) involve different treatment processes and power drive modes; at the same time, the treatment effect is also affected by a variety of local factors. However, there is a lack of research to explore the implementation performance of the DDSTF from a comprehensive perspective. In this study, we took Nantong City, China, as a case study and conducted field investigations of 79 DDSTFs in seven counties from July 2021 to September 2022. We then made an in-depth analysis of the implementation performances of the DDSTF from an internal and external perspective. The results indicate that low temperature will reduce the DDSTF's treatment capacity, and the operation and maintenance mode affect the treatment effect of the facilities significantly. In addition, the non-standardized design for small-capacity facilities commonly results in lower compliance rates. Based on the results, we suggest that improving the quality of design and construction and adopting specialized operations are important ways to improve the treatment efficiency of rural DDSTF.

Mitigating Greenhouse Gas and Ammonia Emissions from Beef Cattle Feedlot Production: A System Meta-Analysis.

Beef cattle production systems are the largest contributors of greenhouse gas (GHG) and ammonia (NH3) emissions in the livestock industry. Here, we present the first meta-analysis and integrated assessment of gaseous emissions and mitigation potentials for a typical beef cattle feedlot system, including methane (CH4), nitrous oxide (N2O), and NH3 losses from enteric fermentation and manure management based on data from 104 studies. A total of 14 integrated emission factors (EF) and the mitigation efficiencies (ME) of 17 available options were provided. The estimated GHG and NH3 emissions from the baseline feedlot system were 2786 ± 108 kg carbon dioxide equivalents (CO2-eq) per animal unit (AU) per year and 49.1 ± 1.5 kg NH3 AU-1 year-1, respectively. Enteric CH4 fermentation and manure on the feedlot contributed 67.5% and 80.8% of the total system GHG and NH3 emissions, respectively. The highest ME values were found for lipid additives for enteric CH4 fermentation and urease inhibitor additives (UI) for NH3 emissions from manure on the feedlot, being -14.9% ( p < 0.05) and -59.5% ( p < 0.001), respectively. The recommended mitigation combinations of a low-crude-protein (CP) diet and a UI additive for manure on the feedlot could reduce the GHG of the system by 4.9% and NH3 by 50.9%. The results of this study have important implications for developing sustainable beef cattle feedlot systems from the viewpoint of GHG and NH3 mitigation.

A major QTL on chromosome 7HS controls the response of barley seedling to salt stress in the Nure × Tremois population.

BACKGROUND: Seedling establishment is a crucial and vulnerable stage in the crop life cycle which determines further plant growth. While many studies are available on salt tolerance at the vegetative stage, the mechanisms and genetic bases of salt tolerance during seedling establishment have been poorly investigated. Here, a novel and accurate phenotyping protocol was applied to characterize the response of seedlings to salt stress in two barley cultivars (Nure and Tremois) and their double-haploid population. RESULTS: The combined phenotypic data and existing genetic map led to the identification of a new major QTL for root elongation under salt stress on chromosome 7HS, with the parent Nure carrying the favourable allele. Gene-based markers were developed from the rice syntenic genomic region to restrict the QTL interval to Bin2.1 of barley chromosome 7HS. Furthermore, doubled haploid lines with contrasting responses to salt stress revealed different root morphological responses to stress, with the susceptible genotypes exhibiting an overall reduction in root length and volume but an increase in root diameter and root hair density. CONCLUSIONS: Salt tolerance at the seedling stage was studied in barley through a comprehensive phenotyping protocol that allowed the detection of a new major QTL on chromosome 7HS.

Integration of CuAAC Polymerization and Controlled Radical Polymerization into Electron Transfer Mediated "Click-Radical" Concurrent Polymerization.

The successful chain-growth copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel-permeation chromatography, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. In addition, the electron transfer mediated "click-radical" concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well-defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability.

Regenerable-Catalyst-Aided, Opened to Air and Sunlight-Driven "CuAAC&ATRP" Concurrent Reaction for Sequence-Controlled Copolymer.

An ideal stimuli-responsive controlled/living radical polymerization should have the ability to manipulate the reaction through spatiotemporal "on/off" controls, achieving the polymerization under fully open conditions and allowing for precise control over macromolecular architecture with defined molecular weights and monomer sequence. In this contribution, the photo (sunlight)-induced electron transfer atom transfer radical-polymerization (PET-ATRP) can be realized to be reversibly activated and deactivated under fully open conditions utilizing one-component copper(II) thioxanthone carboxylate as multifunctional photocatalyst and oxygen scavenger. The polymerization behaviors are investigated, presenting controlled features with first-order kinetics and linear relationships between molecular weights and monomer conversions. More importantly, "CuAAC&ATRP" concurrent reaction combining PET-ATRP, photodriven deoxygenation, and photoactivated CuAAC click reaction is successfully employed to synthesize the sequence-defined multiblock functional copolymers, in which the iterative monomer additions can be easily manipulated under fully open conditions.

Initiator and Photocatalyst-Free Visible Light Induced One-Pot Reaction: Concurrent RAFT Polymerization and CuAAC Click Reaction.

A new, visible light-catalyzed, one-pot and one-step reaction is successfully employed to design well-controlled side-chain functionalized polymers, by the combination of ambient temperature revisible addtion-fragmentation chain transfer (RAFT) polymerization and click chemistry. Polymerizations are well controlled in a living way under the irradiation of visible light-emitting diode (LED) light without photocatalyst and initiator, using the trithiocarbonate agent as iniferter (initiator-transfer agent-terminator) agent at ambient temperature. Fourier transfer infrared spectroscopy (FT-IR), NMR, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) data confirm the successful one-pot reaction. Compared to the reported zero-valent metal-catalyzed one-pot reaction, the polymerization rate is much faster than that of the click reaction, and the visible light-catalyzed one-pot reaction can be freely and easily regulated by turning on and off the light.

Low-cost and reliable substrate-based phenotyping platform for screening salt tolerance of cutting propagation-dependent grass, paspalum vaginatum.

BACKGROUND: Salt tolerance in plants is defined as their ability to grow and complete their life cycle under saline conditions. Staple crops have limited salt tolerance, but forage grass can survive in large unexploited saline areas of costal or desert land. However, due to the restriction of self-incompatible fertilization in many grass species, vegetative propagation via stem cuttings is the dominant practice; this is incompatible with current methodologies of salt-tolerance phenotyping, which have been developed for germination-based seedling growth. Therefore, the performance of seedlings from cuttings under salt stress is still fuzzy. Moreover, the morphological traits involved in salt tolerance are still mostly unknown, especially under experimental conditions with varying levels of stress. RESULTS: To estimate the salt tolerance of cutting propagation-dependent grasses, a reliable and low-cost workflow was established with multiple saline treatments, using Paspalum vaginatum as the material and substrate as medium, where cold stratification and selection of stem segments were the two variables used to control for experimental errors. Average leaf number (ALN) was designated as the best criterion for evaluating ion-accumulated salt tolerance. The reliability of ALN was revealed by the consistent results among four P. vaginatum genotypes, and three warm-season (pearl millet, sweet sorghum, and wild maize) and four cold-season (barley, oat, rye, and ryegrass) forage cultivars. Dynamic curves simulated by sigmoidal mathematical models were well-depicted for the calculation of the key parameter, Salt50. The reliability of the integrated platform was further validated by screening 48 additional recombinants, which were previously generated from a self-fertile mutant of P. vaginatum. The genotypes displaying extreme ALN-based Salt50 also exhibited variations in biomass and ion content, which not only confirmed the reliability of our phenotyping platform but also the representativeness of the aerial ALN trait for salt tolerance. CONCLUSIONS: Our phenotyping platform is proved to be compatible with estimations in both germination-based and cutting propagation-dependent seedling tolerance under salt stresses. ALN and its derived parameters are prone to overcome the species barriers when comparing salt tolerance of different species together. The accuracy and reliability of the developed phenotyping platform is expected to benefit breeding programs in saline agriculture.

Inflammation-based lung adenocarcinoma molecular subtype identification and construction of an inflammation-related signature with bulk and single-cell RNA-seq data.

The role of inflammation is increasingly understood to have a central influence on therapeutic outcomes and prognosis in lung adenocarcinoma (LUAD). However, the detailed molecular divisions involved in inflammatory responses are yet to be fully elucidated. Our study identified two main inflammation-oriented LUAD grades: the inflammation-low (INF-low) and the inflammation-high (INF-high) subtypes. Both presented with unique clinicopathological features, implications for prognosis, and distinctive tumor microenvironment profiles. Broadly, the INF-low grade, marked by its dominant immunosuppressive tumor microenvironment, was accompanied by less favorable prognostic outcomes and a heightened prevalence of oncogenic mutations. In contrast, the INF-high grade exhibited more optimistic clinical trajectories, underscored by its immune-active environment. In addition, our efforts led to the conceptualization and empirical validation of an inflammation-centric predictive model with considerable predictive potency. Our study paves the way for a refined inflammation-centric LUAD classification and fosters a deeper understanding of tumor microenvironment intricacies.

Can the Blended Application of Controlled-Release and Common Urea Effectively Replace the Common Urea in a Wheat-Maize Rotation System? A Case Study Based on a Long-Term Experiment.

The one-time application of blended urea (BU), combining controlled-release urea (CRU) and uncoated urea, has proven to be a promising nitrogen (N) management strategy. However, the long-term sustainability of blending urea remains largely unexplored. To assess whether a single application of blended urea could effectively replace split uncoated urea applications, a long-term field experiment was conducted in the North China Plain (NCP). The results indicated that, when compared to common urea (CU) at the optimal N rate (180 kg N ha-1), BU achieved comparable grain yields, N uptake and NUE (61% vs. 62). BU exhibited a 12% higher 0-20 cm soil organic nitrogen stock and a 9% higher soil organic carbon (C) stock. Additionally, BU reduced life-cycle reactive N (Nr) losses and the N footprint by 10%, and lowered greenhouse gas (GHG) emissions and the C footprint by 7%. From an economic analysis perspective, BU demonstrated comparable private profitability and a 3% greater ecosystem economic benefit. Therefore, BU under the optimal N rate has the potential to substitute split applications of common urea in the long-term and can be regarded as a sustainable N management strategy for wheat and maize production in the NCP.

Distribution of primary and specialized metabolites in Nigella sativa seeds, a spice with vast traditional and historical uses.

Black cumin (Nigella sativa L., Ranunculaceae) is an annual herb commonly used in the Middle East, India and nowadays gaining worldwide acceptance. Historical and traditional uses are extensively documented in ancient texts and historical documents. Black cumin seeds and oil are commonly used as a traditional tonic and remedy for many ailments as well as in confectionery and bakery. Little is known however about the mechanisms that allow the accumulation and localization of its active components in the seed. Chemical and anatomical evidence indicates the presence of active compounds in seed coats. Seed volatiles consist largely of olefinic and oxygenated monoterpenes, mainly p-cymene, thymohydroquinone, thymoquinone, γ-terpinene and α-thujene, with lower levels of sesquiterpenes, mainly longifolene. Monoterpene composition changes during seed maturation. γ-Terpinene and α-thujene are the major monoterpenes accumulated in immature seeds, and the former is gradually replaced by p-cymene, carvacrol, thymo-hydroquinone and thymoquinone upon seed development. These compounds, as well as the indazole alkaloids nigellidine and nigellicine, are almost exclusively accumulated in the seed coat. In contrast, organic and amino acids are primarily accumulated in the inner seed tissues. Sugars and sugar alcohols, as well as the amino alkaloid dopamine and the saponin α-hederin accumulate both in the seed coats and the inner seed tissues at different ratios. Chemical analyses shed light to the ample traditional and historical uses of this plant.

Association of toll-like receptors single nucleotide polymorphisms with HBV and HCV infection: research status.

Background: Hepatitis B virus (HBV) and hepatitis C virus (HCV) infections have become increasingly severe worldwide and are a threat to public health. There have been a number of studies conducted recently on the relationship of single nucleotide polymorphisms (SNPs) to innate immune receptor genes such as toll-like receptors (TLRs). Some literature suggests that SNPs of TLRs are associated with HBV and HCV infection. We summarized the role of TLRs gene polymorphisms associated with HBV and HCV infections and explored their possible mechanisms of action. Methodology: PubMed and Web of Science were used to perform the literature review. Related articles and references were identified and used to analyze the role of TLRs gene polymorphism in HBV and HCV infection. Results: TLRs gene polymorphisms may have beneficial or detrimental effects in HBV and HCV infection, and some SNPs can affect disease progression or prognosis. They affect the disease state by altering gene expression or protein synthesis; however, the mechanism of action is not clearly understood. Conclusions: Single nucleotide polymorphisms of TLRs play a role in HBV and HCV infection, but the mechanism of action still needs to be explored in future studies.

New insights into concentrations, sources and transformations of NH3, NOx, SO2 and PM at a commercial manure-belt layer house.

Pollutant gases and particulate matters (PM) from livestock facilities can affect the health of animals and farm workers and lead to great social environmental risks. This paper presents a comprehensive study on the characteristics of ammonia (NH3), nitrogen oxides (NOx), sulfur dioxide (SO2) and PM (including PM2.5 and PM10) in a 100,000-bird manure-belt layer house in suburb Beijing for three typical seasons of summer, autumn and winter. Indoor air was sampled at an exhaust fan of the mechanically ventilated commercial house. The monitored indoor concentrations of NH3, NOx, SO2, PM2.5 and PM10 were 3.7-5.0 mg m-3, 17-58 µg m-3, 0-11 µg m-3, 100-149 µg m-3 and 354-828 µg m-3, respectively. The indoor NH3 concentrations were largely influenced by the manure removal frequency. The NOx and SO2 were mainly sourced from the ambient air, and the NOx was also partly sourced from manure decomposition in summer. The indoor PM2.5 and PM10 were largely sourced from the ambient air and the indoor manure, respectively. The abundant indoor NH3 caused significantly higher NH4+ concentration in the indoor PM10 (7.98 ± 9.04 µg m-3) than that in the ambient PM10 (3.48 ± 3.52 µg m-3). Secondary inorganic ions (SO42-, NO3- and NH4+) totally contributed 5.7% and 14.6% to the indoor and ambient PM2.5, respectively; they contributed 2.8% and 8.9% to the indoor and ambient PM10, respectively. Organic carbon was the main component of the PM and accounted for 26.6% and 41.5% of the indoor PM2.5 and PM10, respectively. Heavy metal elements (Zn, Cu and Cr) were likely transported from feed to manure and finally accumulated in the PM. Given the high emission potential, the air pollutants from animal production suggested potential risks for human health.

FOXN3 is downregulated in osteosarcoma and transcriptionally regulates SIRT6, and suppresses migration and invasion in osteosarcoma.

Forkhead box N3 (FOXN3) has been reported to be downregulated in numerous cancers, including laryngeal, oral squamous cell and hepatocellular carcinomas, and diffuse large B­cell lymphoma. FOXN3 was proposed to serve as a tumor suppressor; however, the function of FOXN3 in osteosarcoma (OS) remains unknown. The present study suggested that FOXN3 was notably downregulated in OS tissues compared with in adjacent normal tissues, and the expression of FOXN3 was negatively correlated with tumor size, metastasis and tumor, node and metastasis stage. Additionally, low expression levels of FOXN3 predicted a poor prognosis of patients with OS. Additionally, the present study revealed that FOXN3 was also downregulated in OS cells. Numerous functional experiments, including colony formation, Cell Counting Kit­8, wound healing and Transwell invasion assays, were performed. The results of the present study revealed that FOXN3 suppressed the proliferation, migration and invasion of OS cells. SIRT6 has been reported to serve a key role in OS; chromatin­immunoprecipitation (ChIP) and quantitative ChIP, as well as a luciferase reporter assay, demonstrated that SIRT6 was transcriptionally regulated by FOXN3. Furthermore, FOXN3 also regulated matrix metalloproteinase­9 secretion via the regulation of SIRT6 expression. The findings of the present study indicated that FOXN3 serves as a tumor suppressor in OS and proposed FOXN3 as a prognostic predictor and a therapeutic target for patients with OS.

Mitigating ammonia emissions from typical broiler and layer manure management - A system analysis.

Broiler and layer productions are important ammonia (NH3) emission sources in the livestock industry. Here, we present the first meta-analysis and integrated assessment of NH3 emissions and mitigation potentials for typical broiler litter manure management system (MMS) and layer manure belt MMS based on data from 96 studies. A total of 10 integrated NH3 emission factors (EFs) and the NH3 mitigation efficiencies (MEs) of 14 available options were provided. The estimated NH3 emissions from the baseline scenarios of the broiler litter MMS and the layer manure belt MMS were 84.1 ±â€¯5.9 kg AU-1 yr-1 and 53.5 ±â€¯15.8 kg AU-1 yr-1, respectively. The NH3 mitigation for the broiler litter MMS should be focused on the in-house stage, while the mitigation in the layer manure belt MMS should be focused on the outdoor and land application stages. The recommended NH3 mitigation options for the in-house stage, the outdoor stage and the land application stage were acid scrubber (-92.5%), compost biofilter (-71.9%) and changing the manure surface application to incorporation (-83.0%), respectively. The recommended mitigation combinations of low crude protein (LCP) diet, acid scrubber, compost biofilter and manure incorporation achieved the highest NH3 mitigation efficiency from both broiler litter MMS and layer manure belt MMS, by 89.3% and 84.8%, respectively. The results of this study have important implications for developing sustainable poultry production systems from the viewpoint of NH3 mitigation. The environment issues such as the other reactive nitrogen emissions and the greenhouse gas (GHG) emissions should also be considered in the future.

The Characteristics of Carbon, Nitrogen and Sulfur Transformation During Cattle Manure Composting-Based on Different Aeration Strategies.

This study aimed to investigate the characteristics of gaseous emission (methane-CH4, carbon dioxide-CO2, nitrous oxide-N2O, nitric oxide-NO, hydrogen sulfide-H2S and sulfur dioxide-SO2) and the conservation of carbon (C), nitrogen (N), and sulfur (S) during cattle manure composting under different aeration strategies. Three aeration strategies were set as C60, C100, and I60, representing the different combinations of aeration method (continuous-C or intermittent-I) and aeration rate (60 or 100 L·min-1·m-3). Results showed that C, N, S mass was reduced by 48.8-53.1%, 29.8-35.9% and 19.6-21.9%, respectively, after the composing process. Among the three strategies, the intermittent aeration treatment I60 obtained the highest N2O emissions, resulting in the highest N loss and greenhouse gas (GHG) emissions when the GHG emissions from power consumption were not considered. Within two continuous aeration treatments, lower aeration rates in C60 caused lower CO2, N2O, NO, and SO2 emissions but higher CH4 emissions than those from C100. Meanwhile, C and N losses were also lowest in the C60 treatment. H2S emission was not detected because of the more alkaline pH of the compost material. Thus, C60 can be recommended for cattle manure composting because of its nutrient conservation and mitigation of major gas and GHG emissions.

GATA3 is downregulated in osteosarcoma and facilitates EMT as well as migration through regulation of slug.

BACKGROUND: GATA3 functions as a tumor suppressor and has been observed in multiple types of cancer, but the effects and mechanisms of GATA3 in osteosarcoma (OS) are not yet known. METHODS: The GATA3 expression in OS cells and tissues were detected using quantitative reverse-transcription PCR and Western blotting assay. CCK-8 assay, colony formation assay, wound healing assay as well as transwell assay, were performed to determine the effects of GATA3 on cell proliferation, migration and invasion. ChIP and qChIP as well as luciferase assay were performed whether GATA3 transcriptionally regulated slug expression. RESULTS: GATA3 was downregulated in OS cells and tissues. The GATA3 expression was closely associated with tumor size as well as metastasis. GATA3 significantly suppressed OS cells proliferation, migration and invasion. EMT-associated transcript factor, slug, was transcriptionally inhibited by GATA3, thereby regulation of EMT in OS. CONCLUSION: GATA3 serves as a tumor suppressor in OS and suppresses the progression and metastasis of OS through regulation of slug.

Simple and Green Strategy for the Synthesis of "Pathogen-Mimetic" Glycoadjuvant@AuNPs by Combination of Photoinduced RAFT and Bioinspired Dopamine Chemistry.

Innate immune responses recognizing pathogen associated molecular patterns (PAMPs) play a crucial role in adaptive immunity. Toll-like receptors (TLRs) and C-type lectin receptors (CLRs) contribute to antigen capture, uptake, presentation and activation of immune responses. In this contribution, metal-free reversible addition-fragmentation chain transfer (RAFT) polymerization of N-3,4-dihydroxybenzenethyl methacrylamide (DMA) and 2-(methacrylamido) glucopyranose (MAG) under sunlight irradiation using 2-cyanoprop-2-yl-α-dithionaphthalate (CPDN) as iniferter agent, can be employed to fabricate the multivalent glycopolymer containing bioresponsive sugar group and multifunctional catechol functionalities. The polymerization behavior is investigated and it presents controlled features. Moreover, bioinspired dopamine chemistry can be successfully utilized to form in situ glycopolymer-coated gold nanoparticles (AuNPs) without the need of additional reducing reagent, design "pathogen-mimetic" glycoadjuvant recognized by both CLRs and TLRs. The synthetic glycoadjuvant is found to enhance the adjuvant activity as "infected signals" in vitro.

Correlation-Based Network Analysis of Metabolite and Enzyme Profiles Reveals a Role of Citrate Biosynthesis in Modulating N and C Metabolism in Zea mays.

To investigate the natural variability of leaf metabolism and enzymatic activity in a maize inbred population, statistical and network analyses were employed on metabolite and enzyme profiles. The test of coefficient of variation showed that sugars and amino acids displayed opposite trends in their variance within the population, consistently with their related enzymes. The overall higher CV values for metabolites as compared to the tested enzymes are indicative for their greater phenotypic plasticity. H(2) tests revealed galactinol (1) and asparagine (0.91) as the highest scorers among metabolites and nitrate reductase (0.73), NAD-glutamate dehydrogenase (0.52), and phosphoglucomutase (0.51) among enzymes. The overall low H(2) scores for metabolites and enzymes are suggestive for a great environmental impact or gene-environment interaction. Correlation-based network generation followed by community detection analysis, partitioned the network into three main communities and one dyad, (i) reflecting the different levels of phenotypic plasticity of the two molecular classes as observed for the CV values and (ii) highlighting the concerted changes between classes of chemically related metabolites. Community 1 is composed mainly of enzymes and specialized metabolites, community 2' is enriched in N-containing compounds and phosphorylated-intermediates. The third community contains mainly organic acids and sugars. Cross-community linkages are supported by aspartate, by the photorespiration amino acids glycine and serine, by the metabolically related GABA and putrescine, and by citrate. The latter displayed the strongest node-betweenness value (185.25) of all nodes highlighting its fundamental structural role in the connectivity of the network by linking between different communities and to the also strongly connected enzyme aldolase.

Natural RAFT Polymerization: Recyclable-Catalyst-Aided, Opened-to-Air, and Sunlight-Photolyzed RAFT Polymerizations.

The successful sunlight-photolyzed reversible addition-fragmentation chain transfer (RAFT) photopolymerization can be reversibly activated and deactivated by irradiation with sunlight in the absence of photocatalyst and photoinitiator. In the present work, the thiocarbonylthio compounds (dithiobenzoate, trithiocarbonate, and xanthate) can all be employed to carry out the polymerization under sunlight irradiation acting as an initiator, chain transfer agent, and termination agent. Moreover, it was demonstrated that the recyclable-catalyst-aided, opened-to-air, and sunlight-photolyzed RAFT (ROS-RAFT) polymerizations can be successfully carried out to fabricate precise and predictable polymers in the presence of the recyclable magnetic semiconductor nanoparticles (NPs). The oxygen tolerance is likely attributed to a specific interaction between NPs and oxygen.