RESUMO
Aqueous rechargeable magnesium batteries hold immense potential for intrinsically safe, cost-effective, and sustainable energy storage. However, their viability is constrained by a narrow voltage range and suboptimal compatibility between the electrolyte and electrodes. Herein, we introduce an innovative ternary deep eutectic Mg-ion electrolyte composed of MgCl2·6H2O, acetamide, and urea in a precisely balanced 1:1:7 molar ratio. This formulation was optimized by leveraging competitive solvation effects between Mg2+ ions and two organic components. The full batteries based on this ternary eutectic electrolyte, Mn-doped sodium vanadate (Mn-NVO) anode, and copper hexacyanoferrate cathode exhibited an elevated voltage plateau and high rate capability and showcased stable cycling performance. Ex-situ characterizations unveiled the Mg2+ storage mechanism of Mn-NVO involving initial extraction of Na+ followed by subsequent Mg2+ intercalation/deintercalation. Detailed spectroscopic analyses illuminated the formation of a pivotal solid-electrolyte interphase on the anode surface. Moreover, the solid-electrolyte interphase demonstrated a dynamic adsorption/desorption behavior, referred to as the "breathing effect", which substantially mitigated undesired dissolution and side reactions of electrode materials. These findings underscore the crucial role of rational electrolyte design in fostering the development of a favorable solid-electrolyte interphase that can significantly enhance compatibility between electrode materials and electrolytes, thus propelling advancements in aqueous multivalent-ion batteries.
RESUMO
The advancement of rechargeable Mg-metal batteries (RMBs) is severely impeded by the lack of suitable cathode materials. Despite the good cyclic stability of intercalation-type compounds, their specific capacity is relatively low. Conversely, the conversion-type cathodes can deliver a higher capacity but often suffer from poor cycling reversibility and stability. Herein, a WSe2/Se intercalation-conversion hybrid material with elemental Se uniformly distributed into WSe2 nanosheets is fabricated via a simple solvothermal method for high-performance RMBs. The uniformly introduced Se confined in WSe2 nanosheets can not only efficiently improve the conductivity of the hybrid cathodes, facilitating the fast electron transport and ion diffusion, but also provide additional specific capacity. Besides, the WSe2 can effectively inhibit the detrimental Se dissolution and polyselenide shuttle, thereby activating the activity of Se and improving its utilization. Consequently, the synergy of intercalation and conversion mechanisms endows WSe2/Se hybrids with superior reversible capacity of 252 mAh g-1 at 0.1 A g-1 and ultra-long cyclability of up to 5000 cycles at 2.0 A g-1 with capacity retention of 78.1%. This work demonstrates the feasibility of the strategy by integrating intercalation and conversion mechanisms for developing high-performance cathode materials for RMBs.
RESUMO
Circularly polarized photocurrent, observed in p-doped bulk GaAs, varies nonlinearly with the applied bias voltage at room temperature. It has been explored that this phenomenon arises from the current-induced spin polarization in GaAs. In addition, we found that the current-induced spin polarization direction of p-doped bulk GaAs grown in the (001) direction lies in the sample plane and is perpendicular to the applied electric field, which is the same as that in GaAs quantum well. This research indicates that circularly polarized photocurrent is a new optical approach to investigate the current-induced spin polarization at room temperature.
RESUMO
The conversion of chemically inert carbon dioxide and its photoreduction to value-added products have attracted enormous attention as an intriguing prospect for utilizing the principal greenhouse gas CO2. Herein, we explore the use of Ag25 clusters with well-defined atomic structures for high-selectivity photocatalytic hydrogenation of CO2 to methane. Ag25 clusters, with molecular-like properties and surface plasmon resonance, exhibit competitive catalytic activity for light-driven CO2 reduction that yield an almost 100% product selectivity of methane at a relatively mild temperature (100 °C). DFT calculations reveal that the absorption of CO2 on Ag25 clusters is energetically favorable. The methanation of the Ag25 cluster catalyst has been investigated by operando infrared spectroscopy, verifying that methane was produced through a -H-assisted multielectron reaction pathway via the transformation of formyl and formaldehyde species to form surface CHx. This work presents a highly efficient strategy for high-performance CO2 methanation via well-defined metal cluster catalysts.
RESUMO
The catalytic conversion of nitrogen to ammonia is one of the most important processes in nature and chemical industry. However, the traditional Haber-Bosch process of ammonia synthesis consumes substantial energy and emits a large amount of carbon dioxide. Solar-driven nitrogen fixation holds great promise for the reduction of energy consumption and environmental pollution. On the basis of both experimental results and density functional theory calculations, here we report that the oxygen vacancy engineering on ultrathin BiOBr nanosheets can greatly enhance the performance for photocatalytic nitrogen fixation. Through the addition of polymetric surfactant (polyvinylpyrrolidone, PVP) in the synthesis process, VO-BiOBr nanosheets with desirable oxygen vacancies and dominant exposed {001} facets were successfully prepared, which effectively promote the adsorption of inert nitrogen molecules at ambient condition and facilitate the separation of photoexcited electrons and holes. The oxygen defects narrow the bandgap of VO-BiOBr photocatalyst and lower the energy requirement of exciton generation. In the case of the specific surface areas are almost equal, the VO-BiOBr nanosheets display a highly improved photocatalytic ammonia production rate (54.70 µmol·g-1·h-1), which is nearly 10 times higher than that of the BiOBr nanoplates without oxygen vacancies (5.75 µmol·g-1·h-1). The oxygen vacancy engineering on semiconductive nanomaterials provides a promising way for rational design of catalysts to boost the rate of ammonia synthesis under mild conditions.
RESUMO
Background: Endothelial barrier disruption of human pulmonary vascular endothelial cells (HPVECs) is an important pathogenic factor for acute lung injury (ALI)/acute respiratory distress syndrome (ARDS). Mesenchymal stem cells-exosome (MSCs-Exo) represents an ideal carrier for cell-free therapy. The therapeutic implication and underlying mechanism of human placental MSCs-Exo (HPMSCs-Exo) in ALI/ARDS need to be further explored. Materials and Methods: HPMSCs-Exo was extracted from HPMSCs and characterized. Then, the therapeutic effects of exosomes were evaluated in ALI mice and HPVECs. RNA-sequencing was applied to reveal the miRNA profile of HPMSCs-Exo and differentially expressed genes (DEGs) in HPMSCs-Exo-pretreated HPVECs. The targets of miRNAs were predicted by bioinformatics methods and correlated to DEGs. Finally, the role of hsa-miR-148a-3p/ROCK1 pathway in HPVECs has been further discussed. Results: The results showed that HPMSCs-Exo could downregulate Rho-associated coiled-coil-containing protein kinase 1 (ROCK1), upregulate the expression of zonula occludens-1 (ZO-1) and F-actin, promote HPVECs migration and tube formation, reduce cytoskeletal disorders and cell permeability, and thus improve ALI/ARDS. RNA-sequencing revealed the DEGs were mainly enriched in cell junction, angiogenesis, inflammation, and energy metabolism. HPMSCs-Exo contains multiple miRNAs which are associated with cytoskeletal function; the expression abundance of hsa-miR-148a-3p is the highest. Bioinformatic analysis identified ROCK1 as a target of hsa-miR-148a-3p. The overexpression of hsa-miR-148a-3p in HPMSCs-Exo promoted the migration and tube formation of HPVECs and reduced ROCK1 expression. However, the overexpression of ROCK1 on HPVECs reduced the therapeutic effect of HPMSCs-Exo. Conclusions: HPMSCs-Exo represents a protective regimen against endothelial barrier disruption of HPVECs in ALI/ARDS, and the hsa-miR-148a-3p/ROCK1 pathway plays an important role in this therapeutics implication.
RESUMO
Objective To investigate the effects of lipopolysaccharide (LPS) on human pulmonary vascular endothelial cells (HPVECs) cytoskeleton and perform biological analysis of the microRNA (miRNA) spectrum. Methods The morphology of HPVECs was observed by microscope, the cytoskeleton by FITC-phalloidin staining, and the expression of VE-cadherin was detected by immunofluorescence cytochemical staining; the tube formation assay was conducted to examine the angiogenesis, along with cell migration test to detect the migration, and JC-1 mitochondrial membrane potential to detect the apoptosis. Illumina small-RNA sequencing was used to identify differentially expressed miRNAs in NC and LPS group. The target genes of differentially expressed miRNAs were predicted by miRanda and TargetScan, and the functional and pathway enrichment analysis was performed on Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG). Further biological analysis of related miRNAs was carried out. Results After the LPS got induced, the cells became round and the integrity of cytoskeleton was destroyed. The decreased expression of VE-cadherin was also observed, along with the decreased ability of angiogenesis and migration, and increased apoptosis. Sequencing results showed a total of 229 differential miRNAs, of which 84 miRNA were up-regulated and 145 miRNA were down-regulated. The target gene prediction and functional enrichment analysis of these differential miRNA showed that they were mainly concentrated in pathways related to cell connection and cytoskeleton regulation, cell adhesion process and inflammation. Conclusion In vitro model of lung injury, multiple miRNAs are involved in the process of HPVECs cytoskeleton remodeling, the reduction of barrier function, angiogenesis, migration and apoptosis.
Assuntos
Lipopolissacarídeos , MicroRNAs , Humanos , Lipopolissacarídeos/farmacologia , Células Endoteliais/metabolismo , MicroRNAs/genética , MicroRNAs/metabolismo , Pulmão/metabolismo , Citoesqueleto , Perfilação da Expressão GênicaRESUMO
Multivalent ion batteries have attracted great attention because of their abundant reserves, low cost and high safety. Among them, magnesium ion batteries (MIBs) have been regarded as a promising alternative for large-scale energy storage device owing to its high volumetric capacities and unfavorable dendrite formation. However, the strong interaction between Mg2+ and electrolyte as well as cathode material results in very slow insertion and diffusion kinetics. Therefore, it is highly necessary to develop high-performance cathode materials compatible with electrolyte for MIBs. Herein, the electronic structure of NiSe2 micro-octahedra was modulated by nitrogen doping (N-NiSe2) through hydrothermal method followed by a pyrolysis process and this N-NiSe2 micro-octahedra was used as cathode materials for MIBs. It is worth noting that N-NiSe2 micro-octahedra shows more redox active sites and faster Mg2+ diffusion kinetics compared with NiSe2 micro-octahedra without nitrogen doping. Moreover, the density functional theory (DFT) calculations indicated that the doping of nitrogen could improve the conductivity of active materials on the one hand, facilitating Mg2+ ion diffusion kinetics, and on the other hand, nitrogen dopant sites could provide more Mg2+ adsorption sites. As a result, the N-NiSe2 micro-octahedra cathode exhibits a high reversible discharge capacity of 169 mAh g-1 at the current density of 50 mA g-1, and a good cycling stability over 500 cycles with a maintained discharge capacity of 158.5 mAh g-1. This work provides a new idea to improve the electrochemical performance of cathode materials for MIBs by the introduction of heteroatom dopant.
RESUMO
Layered double hydroxides (LDHs) have been intensively investigated as promising cathodes for the new concept chloride ion battery (CIB) with multiple advantages of high theoretical energy density, abundant raw materials and unique dendrite-free characteristics. However, driven by the great compositional diversity, a complete understanding of interactions between metal cations, as well as a synergetic effect between metal cations and lattice oxygen on LDH host layers in terms of the reversible Cl-storage capability, is still a crucial but elusive issue. In this work, we synthesized a series of chloride-inserted trinary Mox-doped NiCo2-Cl LDH (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) with gradient oxygen vacancies as enhanced cathodes toward CIBs. The combination of advanced spectroscopic techniques and theoretical calculations reveals that the Mo dopant facilitates oxygen vacancy formation and varies the valence states of coordinated transition metals, which can not only tune the electronic structure effectively and promote Cl-ion diffusion, but improve the redox activity of LDHs. The optimized Mo0.3NiCo2-Cl LDH delivers a reversible discharge capacity of 159.7 mA h g-1 after 300 cycles at 150 mA g-1, which is almost a triple enhancement compared to that of NiCo2Cl LDH. The superior Cl-storage of trinary Mo0.3NiCo2Cl LDH is attributed to the reversible intercalation/deintercalation of chloride ions in the LDH gallery along with the oxidation state changes in Ni0/Ni2+/Ni3+, Co0/Co2+/Co3+ and Mo4+/Mo6+ couples. This simple vacancy engineering strategy provides critical insights into the significance of the chemical interaction of various components on LDH laminates and aims to effectively design more LDH-based cathodes for CIBs, which can even be extended to other halide-ion batteries like fluoride ion batteries and bromide ion batteries.
RESUMO
Rechargeable magnesium batteries (RMBs) show great potential in large-scale energy storage systems, due to Mg2+ with high polarity leading to strong interactions within the cathode lattice, and the limited discovery of functional cathode materials with rapid kinetics of Mg2+ diffusion and desirable cyclability retards their development. Herein, we innovatively report the confined synthesis of VS2/polyaniline (VS2/PANI) hybrid nanosheets. The VS2/PANI hybrids with expanded interlayer spacing are successfully prepared through the exfoliation of VS2 and in situ polymerization between VS2 nanosheets and aniline. The intercalated PANI increases the interlayer spacing of VS2 from 0.57 to 0.95 nm and improves its electronic conductivity, leading to rapid Mg-ion diffusivity of 10-10-10-12 cm2 s-1. Besides, the PANI sandwiched between layers of VS2 is conducive to maintaining the structural integrity of electrode materials. Benefiting from the above advantages, the VS2/PANI-1 hybrids present remarkable performance for Mg2+ storage, showing high reversible discharge capacity (245 mA h g-1 at 100 mA g-1) and impressive long lifespan (91 mA h g-1 after 2000 cycles at 500 mA g-1). This work provides new perspectives for designing high-performance cathode materials based on layered materials for RMBs.
RESUMO
A spin-related photocurrent excited by circularly polarized light is observed near the electrodes on a few-layer ReS2 sample at room temperature. For both electrodes, the spatial distribution of the spin photocurrent shows a feature of two wings, with one positive and the other negative. In this work, it is suggested that this phenomenon arises from the inverse spin Hall effect due to the local electric field near the electrode. Bias voltage that modulates this field further controls the sign and magnitude of the spin photocurrent. Our research shows that the electric field near the electrodes has a significant impact on the spin transmission operation, and hence it could be taken into account for manufacturing spintronic devices in the future.
RESUMO
Rechargeable magnesium batteries (RMBs) are considered as potential energy storage devices due to their high volumetric specific capacity, good safety, as well as source abundance. Despite extensive efforts devoted to constructing an efficient magnesium battery system, the sluggish Mg2+ diffusion in conventional cathode materials often leads to slow rate kinetics, low capacity, and poor cycling lifespan. Although transition metal selenides with soft anion frameworks have attracted extensive attention, their Mg2+ storage mechanism still needs to be clarified. Herein, we demonstrate that the ultrathin CoSe2 nanoribbons can be used as a robust cathode material for RMBs and reveal a novel Mg2+ storage mechanism based on cooperative cationic (Co) and anionic (Se) redox processes via systematic ex-situ characterizations. Compared to other metal selenide cathodes based on conversion reactions of solely metal cations, the cooperative cationic-anionic redox reactions of the CoSe2 cathode contribute to obtaining an enhanced specific capacity and boosted electrochemical kinetics. Moreover, on one hand, the ultrathin nanoribbon structure enables effective contact between the electrode material and electrolyte and on the other hand significantly reduces the length and time consumption of Mg2+ diffusion, leading to dominated surface-driven capacitance-controlled Mg2+ storage behavior and rapid Mg2+ storage kinetics. As a result, the ultrathin CoSe2 nanoribbon cathode exhibits a reversible discharge capacity of â¼130 mAh g-1 at 100 mA g-1, good rate capability (116 mAh g-1 at 300 mA g-1), and long cyclability over 600 cycles. This finding confirms the development potentiality of polyvalent metal selenide cathode materials based on a cooperative cationic-anionic redox mechanism for the construction of next-generation multivalent secondary batteries.
RESUMO
The large volume expansion and poor electrical conductivity of copper phosphide (Cu3P) during the cycle limit their further application as anode of lithium-ion batteries. Therefore, polyvinylpyrrolidone (PVP) modified Cu3(BTC)2-derived (BTCâ¯=â¯1, 3, 5-Benzentricarboxylic acid) in-situ N/P-co-doped Octahedron carbon encapsulated Cu3P nanoparticles (Cu3P@NPC) are successfully prepared through a two-step process of carbonization and phosphating. The N/P-co-doped Octahedron carbon matrix improves the conductivity of Cu3P and moderates the volume expansion during the lithiation/delithiation process. Meanwhile, the interaction between the Cu3P and the doped carbon matrix is methodically explored by using density functional theory (DFT). Through the analysis of the partial charge density, the density of states and the Bader charge, and the calculation results verify the correctness of the experimental observation results, that is, Cu3P@NPC has good electrochemical performance. The results show that Cu3P@NPC, as the anode of Lithium-ion batteries, has excellent electrochemical performance: it exhibits satisfactory rate performance (251.9 mAh g-1 at 5.0 A g-1) and excellent cycle performance (336.4 mAh g-1 at 1 A g-1 over 1000 cycles). This article provides an effective strategy for the encapsulation of metal phosphide nanoparticles in a doped carbon matrix.
RESUMO
Growing electroactive materials directly on a three-dimensional conductive substrate can effectively reduce the "ineffective area" of the electrode during the electrochemical reaction, increase the utilization rate of the material, and thus increase the energy density of the device. Using the network structure of the three-dimensional conductive substrate to design electrode materials with unique microstructures can also improve the stability of the materials. In this work, we obtained different copper-based materials on the copper foam (CF) by in-situ growth method, and designed an independent three-dimensional layered CuO@NiCoFe-S (CuO@NCFS) core-shell nanostructure composite material. CuO@NCFS exhibits excellent electrochemical performance, reaching a specific capacitance of 4551 mF cm-2 at a current density of 1 mA cm-2 with good cycle stability (94.2% after 5000 cycles). In addition, the asymmetric supercapacitor (ASC) uses CuO@NCFS as the positive electrode and rGO as the negative electrode, which can provide an energy rate density of 4.5 mW cm-2 at a high energy density of 99.9 µWh cm-2. The findings provide some insight into rational design of electrode materials for high performance energy storage.
RESUMO
Design and fabrication of novel electrode materials with excellent specific capacitance and cycle stability are urgent for advanced energy storage devices, and the combinability of multiple modification methods is still insufficient. Herein, Ni2+, Zn2+ double-cation-substitution Co carbonate hydroxide (NiZnCo-CH) nanosheets arrays were established on 3D copper with controllable morphology (3DCu@NiZnCo-CH). The self-standing scalable dendritic copper offers a large surface area and promotes fast electron transport. The 3DCu@NiZnCo-CH electrode shows a markedly improved electrochemical performance with a high specific capacity of â¼1008 C g-1 at 1 A g-1 (3.2, 2.83, and 1.26 times larger than Co-CH, ZnCo-CH, and NiCo-CH, respectively) and outstanding rate capability (828.8 C g-1 at 20 A g-1) due to its compositional and structural advantages. Density functional theory (DFT) calculation results illustrate that cation doping adjusts the adsorption process and optimizes the charge transfer kinetics. Moreover, an aqueous hybrid supercapacitor based on 3DCu@NiZnCo-CH and rGO demonstrates a high energy density of 42.29 Wh kg-1 at a power density of 376.37 W kg-1, along with superior cycling performance (retained 86.7% of the initial specific capacitance after 10,000 cycles). Impressively, these optimized 3DCu@NiZnCo-CH//rGO devices with ionic liquid can be operated stably in a large potential range of 4 V with greatly enhanced energy density and power capability (110.12 Wh kg-1 at a power density of 71.69 W kg-1). These findings may shed some light on the rational design of transition-metal compounds with tunable architectures by multiple modification methods for efficient energy storage.
RESUMO
Functionalized carbon nanomaterials are potential candidates for use as anode materials in potassium-ion batteries (PIBs). The inevitable defect sites in the architectures significantly affect the physicochemical properties of the carbon nanomaterials, thus defect engineering has recently become a vital research area for carbon-based electrodes. However, one of the major issues holding back its further development is the lack of a complete understanding of the effects accounting for the potassium (K) storage of different carbon defects, which have remained elusive. Owing to pressing research demands, the construction strategies, adsorption difficulties, and structure-activity relationships of the carbon defect-involved reaction centers for the K adsorption are systematically summarized using first principles calculations. Carbon defects affect the ability to trap K by affecting the geometry, charge distribution, and conductive behavior of the carbon surface. The results show that carbon doping with pyridinic-N, pyrrolic-N, and P defect sites tend to act as trapping K sites because of electron-deficient sites. However, graphite-N and sulfur doping are less capable of trapping K. In addition, it has been proved using calculations that the defects can inhibit the growth of the K dendrite. Finally, using the molten salt method, we prepared the undoped and nitrogen-doped carbon materials for comparison, verifying the results of the calculation.
RESUMO
Solar-driven nitrogen fixation is a promising clean and mild approach for ammonia synthesis beyond the conventional energy-intensive Haber-Bosch process. However, it is still challenging to design highly active, stable, and low-cost photocatalysts for activating inert N2 molecules. Herein, we report the synthesis of anatase-phase black TiO2-xSy nanoplatelets enriched with abundant oxygen vacancies and sulfur anion dopants (VO-S-rich TiO2-xSy) by ion exchange method at gentle conditions. The VO-S-rich TiO2-xSy nanoplatelets display a narrowed bandgap of 1.18 eV and much stronger light absorption that extends to the near-infrared (NIR) region. The co-presence of oxygen vacancies and sulfur dopants facilitates the adsorption of N2 molecules, promoting the reaction rate of N2 photofixation. Theoretical calculations reveal the synergistic effect of oxygen vacancies and sulfur dopants on visible-NIR light adsorption and photoexcited carrier transfer/separation. The VO-S-rich TiO2-xSy exhibits improved ammonia yield rates of 114.1 µmol g-1 h-1 under full-spectrum irradiation and 86.2 µmol g-1 h-1 under visible-NIR irradiation, respectively. Notably, even under only NIR irradiation (800-1100 nm), the VO-S-rich TiO2-xSy can still deliver an ammonia yield rate of 14.1 µmol g-1 h-1. This study presents the great potential to regulate the activity of photocatalysts by rationally engineering the defect sites and dopant species for room-temperature N2 reduction.
RESUMO
Tin (Sn) based anode materials have been regarded as promising alternatives for graphite in lithium ion batteries (LIBs) due to their high theoretical specific capacity and conductivity. However, their practical application is severely restrained by the drastic volume variation during cycling processes. Here we report the preparation of intermetallic SnSb nanodots embedded in carbon nanotube reinforced N-doped carbon nanofibers (SnSb-CNTs@NCNFs) as a free-standing and flexible anode for LIBs. In this unique structure, the SnSb nanodots are well protected by the NCNFs and exhibit greatly reduced volume change. The mechanical strength and conductivity of the nanofabric electrode are further improved by the embedded CNTs. Benefiting from these advantages, the SnSb-CNTs@NCNFs anode delivers a high reversible capacity of 815 mA h g-1 at 100 mA g-1, a high rate capability (370 mA h g-1 at 5000 mA g-1) and a long cycle life (451 mA h g-1 after 1000 cycles at 2000 mA g-1). When assembled into flexible pouch cells, the full cells based on SnSb-CNTs@NCNFs anodes also exhibit high flexibility and good lithium storage performances.
RESUMO
Antimony (Sb) based anodes with high conductivity and capability have shown great promise for applications in lithium ion batteries (LIBs). However, they often suffer from poor cycling stability because of the drastic volume variation and structural degradation on undergoing lithiation-delithiation processes. Here we demonstrate a novel Sb-based anode with a free-standing structure realized by uniformly implanting intermetallic compound breithauptite (nickel antimonide, NiSb) nanocrystals into nitrogen-doped carbon nanofibers (NiSb@NCNFs). The discharge/charge behavior of NiSb@NCNFs was systematically investigated by ex situ characterization, which revealed a special "dealloying-lithiation/delithiation-realloying" cycling mechanism. The NiSb nanocrystals possess high lithium storage capacity, and the interconnected network of NCNFs can accommodate the volume variation of encapsulated NiSb nanoparticles, while also providing smooth pathways for charge transport. Compared to other Sb-based anodes, the NiSb@NCNF anode presents exceptional reversible capacity (720 mA h g-1 at a current density of 100 mA g-1) and greatly enhanced cycling life at high rates (510 mA h g-1 after 2000 cycles at 2000 mA g-1). Furthermore, the free-standing NiSb@NCNF anode is free of binders, conductive additives and metal current collectors, exhibiting high flexibility and remarkable performances for the construction of flexible and bendable soft-packed full Li-ion pouch cells.
RESUMO
Solar-driven photocatalytic overall water splitting is regarded as one of the ideal strategies to generate renewable hydrogen energy without the initiation of environmental issues. However, there are still a few remaining challenges to develop wide-light-absorption and stable photocatalysts for the simultaneous production of H2 and O2 in pure water without sacrificial reagents. Herein, we report the design and preparation of Z-scheme TiO2/ZnTe/Au nanocorncob heterojunctions by homogeneously decorating Au nanoparticles onto the surface of core-shell TiO2/ZnTe coaxial nanorods for highly efficient overall water splitting. With the appropriate band structure of TiO2/ZnTe heterojunctions and the surface plasmon resonance enhancement of Au nanoparticles, the well-designed TiO2/ZnTe/Au nanocorncob heterojunctions can synergistically make effective utilization of broad-range solar light illunimation and enhance the separation efficency of electron-hole pairs, as evidenced by UV-Vis absorption and time-resolved photoluminescence spectroscopy. Photoelectrochemical characterization confirms that the water-splitting reaction on TiO2/ZnTe/Au nanocorncobs is mainly carried out via a two-electron/two-electron transfer process with an intermediate product of H2O2. As a result, the TiO2/ZnTe/Au nanocorncob photocatalyst can generate H2 and O2 with a stoichiometric ratio of 2 : 1 under light irradiation without any sacrificial agents, exhibiting a high H2 production rate of 3344.0 µmol g-1 h-1 and a solar-to-hydrogen (STH) efficiency of 0.98%. Moreover, the TiO2/ZnTe/Au nanocorncob heterojunctions show high stability and well-preserved morphological integrity after long-term photocatalytic tests. This study provides a prototype route to produce clean hydrogen energy from only sunlight, pure water, and rationally-designed heterojunction photocatalysts.