Enhanced Catalytic Activity of Binuclear Oxidovanadium(IV) Bisbenzimidazole Linked Porphyrin Dimer for the Generation of Biologically Active 3,4-Dihydropyrimidinones and Their Corresponding Thiones.

Binuclear vanadyl(IV) porphyrin (V2BP), where two vanadium(IV) porphyrin macrocycles are linked through benzimidazole units at the ß-positions, has been prepared and characterized with various techniques, such as UV-vis, Fourier transform-infrared, electron paramagnetic resonance, cyclic voltammetry, density functional transform calculations, and mass spectrometry. V2BP exhibits a red shift (Δλmax = 10 nm) in the Soret band as compared with unsubstituted parent vanadyl(IV) meso-tetraphenylporphyrin (VP). The synthesized binuclear vanadyl(IV) porphyrin (V2BP) has further been studied as a catalyst to explore a single-pot multicomponent Biginelli reaction producing biologically active 3,4-dihydropyrimidin-2-(1H)-one (DHPM)-based biomolecules and the corresponding thiones under solvent-free conditions and its catalytic activity has been compared with vanadyl(IV) meso-tetraphenylporphyrin (VP). Several reaction conditions, such as the amount of catalyst, time, solvent, and temperature, have been optimized to obtain the maximum yield of DHPMs or thiones. The synthesized ß-functionalized V2BP porphyrin dimer manifests much higher conversion (84-95% yield) of DHPMs or the corresponding thiones under the optimized reaction conditions with high TON (4454-5037) and TOF (1113-1259 h-1) values for the one-pot multicomponent Biginelli reaction as compared to the literature. The catalyst exhibited excellent recyclability up to 10 cycles.

Mandibular molar protraction: A comparison between fixed functional appliances and temporary anchorage devices.

INTRODUCTION: This study aimed to compare the efficiency of temporary anchorage devices (TADs) and fixed functional appliances (FFAs) for mandibular molar protraction. METHODS: Orthodontic records of 1050 consecutively treated patients with molar protraction were screened. Thirty-six records (22 females and 14 males; mean age, 17.4 years) were divided into two groups: TAD (21 subjects with 25 edentulous spaces) and FFA (15 subjects with 24 edentulous spaces). The primary outcome measure was the efficiency of protraction [magnitude and time required for protraction (rate) and anchor loss (AL)]. The secondary outcomes involved measuring the type of tooth movement (TOTM), external apical root resorption (EARR), alveolar bone height change (ABHC), alveolar bone width change (ABWC) and appliance failure. RESULTS: The rate of tooth movement was significantly higher for FFAs (0.83 ± 0.35 mm/month) versus TADs (0.49 ± 0.2 mm/month) (P = .005). Total treatment duration was less for FFAs (34.78 ± 8.1 months) versus TADs (47.72 ± 13.94 months) (P = .002). TOTM was similar for both (P = .909). EARR was 1.42 ± 1.38 mm for TAD and 1.25 ± 0.88 mm for FFA (P = .81). ABHC increased in the FFA group (1.01 ± 3.62 mm) and decreased for the TAD group (0.68 ± 1.66 mm). ABWC increased for both TAD (1.81 ± 1.73 mm) and FFA (1.75 ± 1.35 mm). The failure rate was 50% for FFAs and 33% for TADs. CONCLUSIONS: Both systems provided translation of lower molars with comparable anchorage control. However, FFAs were more efficient than TADs for lower molar protraction.

Long-term evaluation of soft-tissue changes after miniscrew-assisted and conventional rapid palatal expansion using voxel-based superimposition of cone-beam computed tomography scans.

INTRODUCTION: This study aimed to evaluate the soft-tissue changes in the long-term after miniscrew-assisted rapid palatal expansion (MARPE) and conventional rapid palatal expansion (RPE) appliances compared with a matched control group using voxel-based superimposition of cone-beam computed tomography (CBCT) scans. METHODS: A total of 180 CBCTs for 60 patients at 3-time points were evaluated: pretreatment (T1), postexpansion (T2), and posttreatment (T3) for 3 groups: (1) MARPE, (2) RPE, and (3) controls (time-period T1 to T3: MARPE, 2 years 8 months; RPE, 2 years 9 months; control, 2 years 7 months). The voxel-based superimposition technique was used to superimpose the CBCT scans, after which the soft-tissue surfaces were extracted from the superimposed T1-CBCT, T2-CBCT, and T3-CBCT scans. Nine landmarks were identified on the CBCT scans: nasion, A-point, pogonion, right and left alar base, right and left zygoma, and right and left gonion. The coordinates of the 9 parameters were obtained in the x-axis, y-axis, and z-axis for the CBCT scans and subjected to statistical analyses. The changes in the soft-tissue surfaces were also evaluated by color-coded maps for short-term (T2) and long-term (T3) changes. The mean changes from T1 to T2 and T1 to T3 were tested against no change within the groups by paired t test, and the mean changes among the 3 groups were compared with analysis of variance F test with Tukey's Honest significant difference used for adjusting P values for multiple testing. RESULTS: In the short term, both MARPE and RPE led to a significant downward movement of pogonion, left gonion, and lateral movement of the right and left alar base compared with controls at T2 (P <0.05). In addition, MARPE led to a significant downward movement of right gonion than controls at T2 (P <0.05). Moreover, RPE led to a significant downward and forward movement of A-point and downward movement of the right and left alar base than controls at T2 (P <0.05). However, in the long-term, there were no significant differences in the soft-tissue changes among the MARPE, RPE, and control groups. CONCLUSIONS: MARPE and RPE do not lead to significant soft-tissue changes in the long term when compared with controls.

Dynamic changes in transcriptome during orthodontic tooth movement.

OBJECTIVES: The objective of this study was to determine global changes in gene expression with next generation sequencing (NGS) in order to assess the biological effects of orthodontic tooth movement (OTM) on alveolar bone in a rat model. MATERIALS AND METHODS: Thirty-five Wistar rats (age 14 weeks) were used in the study. The OTM was performed using closed coil Nickel-Titanium spring to apply a mesial force on maxillary first molars of 8-10 g. Three hours, 1, 3, 7 and 14 days after the placement of the appliance, rats were killed at each time point respectively. The alveolar bone, around left maxillary first molar, were excised on compression side. The samples were immediately frozen in liquid nitrogen for subsequent RNA extraction. Total RNA samples were prepared for mRNA sequencing using the Illumina kit. RNA-Seq reads were aligned to the rat genomes using the STAR Aligner and bioinformatic analysis was performed. RESULTS: A total of 18 192 genes were determined. Day 1 has the highest number of differentially expressed genes (DEGs) observed with more upregulated than downregulated genes. A total of 2719 DEGs were identified to use as input for the algorithm. Six distinct clusters of temporal patterns were observed representing proteins that were differentially regulated indicating different expression kinetics. Principal component analysis (PCA) showed distinct clustering by time points and days 3, 7 and 14 share similar gene expression pattern. CONCLUSIONS: Distinct gene expression pattern was observed at different time points studied. Hypoxia, inflammation and bone remodelling pathways are major mechanisms behind OTM.

Estimating the 3-D location of impacted maxillary canines: A CBCT-based analysis of severity of impaction.

OBJECTIVES: The objective of the study was to quantify the 3-D location of impacted canines by measuring their linear and angular deviations in relation to adjacent structures and further evaluate impaction severity. METHODS: CBCT images of 314 impacted canines were analysed in the sagittal, coronal and axial planes. Linear and angular measurements were recorded. Canine inclination was identified in coronal and sagittal planes. An evaluation system was constructed for analysis. Upright canine was considered as the appropriate position for fully erupted maxillary canine. Outcomes were compared between right and left sides and by gender. For categorical variables, chi-square tests were used while Mann-Whitney U test was used for continuous variables. Regression models were used to measure severity. RESULTS: Impactions were greater in females (119/207; 57.5%). No significant differences between unilateral (100/207; 49.3%) and bilateral (107/207; 51.7%) (P > 0.05). Out of 314 impactions, 105 (33.4%) were mild, 118 (37.58%) moderate and 91 (28.98%) severe. Severe impactions were primarily buccal (44/ 91; 48.3%), in the occlusal ½ of the adjacent incisor root (38/ 91, 41.7%), mesial to the distal border of central incisor (47/91, 51.6%), with sagittal angle value + >45 ̊ (46/ 91, 50.5%) and mesial tip + >30 ̊ (86/ 91, 94.5%). CONCLUSIONS: Severely impacted canines had their crowns buccal, closer to occlusal plane and mesial to the distal border of the central incisor with greater than 45-degree buccal inclination and greater than 30-degree mesial tip. The sagittal angle can have a significant impact on the severity of impaction. A new classification system was proposed to quantify severity.

Blockchain technology and federated machine learning for collaborative initiatives in orthodontics and craniofacial health.

There is a paucity of largescale collaborative initiatives in orthodontics and craniofacial health. Such nationally representative projects would yield findings that are generalizable. The lack of large-scale collaborative initiatives in the field of orthodontics creates a deficiency in study outcomes that can be applied to the population at large. The objective of this study is to provide a narrative review of potential applications of blockchain technology and federated machine learning to improve collaborative care. We conducted a narrative review of articles published from 2018 to 2023 to provide a high level overview of blockchain technology, federated machine learning, remote monitoring, and genomics and how they can be leveraged together to establish a patient centered model of care. To strengthen the empirical framework for clinical decision making in healthcare, we suggest use of blockchain technology and integrating it with federated machine learning. There are several challenges to adoption of these technologies in the current healthcare ecosystem. Nevertheless, this may be an ideal time to explore how best we can integrate these technologies to deliver high quality personalized care. This article provides an overview of blockchain technology and federated machine learning and how they can be leveraged to initiate collaborative projects that will have the patient at the center of care.

Call for algorithmic fairness to mitigate amplification of racial biases in artificial intelligence models used in orthodontics and craniofacial health.

Machine Learning (ML), a subfield of Artificial Intelligence (AI), is being increasingly used in Orthodontics and craniofacial health for predicting clinical outcomes. Current ML/AI models are prone to accentuate racial disparities. The objective of this narrative review is to provide an overview of how AI/ML models perpetuate racial biases and how we can mitigate this situation. A narrative review of articles published in the medical literature on racial biases and the use of AI/ML models was undertaken. Current AI/ML models are built on homogenous clinical datasets that have a gross underrepresentation of historically disadvantages demographic groups, especially the ethno-racial minorities. The consequence of such AI/ML models is that they perform poorly when deployed on ethno-racial minorities thus further amplifying racial biases. Healthcare providers, policymakers, AI developers and all stakeholders should pay close attention to various steps in the pipeline of building AI/ML models and every effort must be made to establish algorithmic fairness to redress inequities.

Survival and failure rate of lower lingual bonded retainers: A retrospective cohort evaluation.

OBJECTIVE: The objectives of the study were to evaluate the survival rates for lower lingual retainers (LLRs) and to establish a correlation between patients' treatment-related factors (age, sex, malocclusion, appliance used for treatment, teeth bonded, retention protocols) to the survival of LLRs. MATERIALS AND METHODS: A total of 765 subjects [474 females and 291 males: mean age = 24.29 ± 10.67 years] between 2013 and 2022 were included. A customized data collection form was utilized to gather the data from the electronic health record (EHR) of subjects. Patient-related factors, crowding or spacing, deep bite or open bite and duration of treatment were extracted from patients' files. Kaplan-Meier estimator was used for the survival function, whereas Cox proportional hazards regression models were used to associate risk factors with retainer survival. RESULTS: 328 (42.9%) subjects had their LLRs failed, and the survival period was on average 17.37 ± 22.85 months. On the other hand, the follow-up period for the retainers that did not fail was on average 47.19 ± 23.66 months. 192 (28.3%) subjects had segment failure (retainer detached from 3 teeth or less), while 51 (7.5%) subjects had failures in more than 3 teeth (complete). None of the evaluated clinical variables were significantly associated with LLRs failure except for the bite category (P = .013) and the appliance used for treatment (P < .001). CONCLUSION: Success rate for LLRs was 57.1% over 47.19 months, failure rate was 42.9% over 17.37 months. The presence of deep bite and treatment with aligners were significantly associated with increased failure rate.

Thoracic Surgery and the Elderly; Is Lobectomy Safe in Octogenarians?

PURPOSE: Non-small cell lung cancer is the most common malignancy of the elderly, with 5-year survival estimates of 16.8%. The prognostic benefit of surgical resection for early lung cancer is irrefutable and maintained irrespective of age, even in patients over 75 years. Concerningly, despite the prognostic benefit of surgery there are deviations from standard treatment protocols with increasing age due to concerns of increased morbidity and mortality with surgery, without evidence to support this. METHOD: A state-wide retrospective registry study of Queensland's Cardiac Outcomes Registry's (QCOR) Thoracic Database examining the influence of age on the safety of Lung Resection (1 January 2016-20 April 2022). RESULTS: This included 1,232 patients, mean age at surgery was 66 years (range 14-91 years), with 918 thoracotomies performed. Three deaths occurred within 30-days (0.24%). Octogenarians (n=60) had lower rates of smoking (26% vs 6%), respiratory, cardiovascular, and cerebrovascular disease suggesting this subset of patients is carefully selected. Octogenarian status was not associated with an increased all-cause morbidity (p=0.09) or 30-day mortality (p=0.06). Further to this it was not associated with re-operation (4.4% vs 8.3%, p=0.1), increased postoperative stay (6.66 vs 6.65 days, p=0.99) or myocardial infarction. An independent predictor of morbidity was male sex (OR 1.58, CI 1.2-2.1 p=0.001). CONCLUSION: Age ≥80 years did not increase surgical morbidity or mortality in the appropriately selected patient and should not be a barrier to referral for consideration of surgical resection.

Cross-talk between EGFR and BMP signals regulates chondrocyte maturation during endochondral ossification.

BACKGROUND: Progressive maturation of growth plate chondrocytes drives long bone growth during endochondral ossification. Signals from the epidermal growth factor receptor (EGFR), and from bone morphogenetic protein-2 (BMP2), are required for normal chondrocyte maturation. Here, we investigated cross-talk between EGFR and BMP2 signals in developing and adult growth plates. RESULTS: Using in vivo mouse models of conditional cartilage-targeted EGFR or BMP2 loss, we show that canonical BMP signal activation is increased in the hypertrophic chondrocytes of EGFR-deficient growth plates; whereas EGFR signal activation is increased in the reserve, prehypertrophic and hypertrophic chondrocytes of BMP2-deficient growth plates. EGFR-deficient chondrocytes displayed increased BMP signal activation in vitro, accompanied by increased expression of IHH, COL10A1, and RUNX2. Hypertrophic differentiation and BMP signal activation were suppressed in normal chondrocyte cultures treated with the EGFR ligand betacellulin, effects that were partially blocked by simultaneous treatment with BMP2 or a chemical EGFR antagonist. CONCLUSIONS: Cross-talk between EGFR and BMP2 signals occurs during chondrocyte maturation. In the reserve and prehypertrophic zones, BMP2 signals unilaterally suppress EGFR activity; in the hypertrophic zone, EGFR and BMP2 signals repress each other. This cross-talk may play a role in regulating chondrocyte maturation in developing and adult growth plates.

Short-term and long-term effects of miniscrew-assisted and conventional rapid palatal expansion on the cranial and circummaxillary sutures.

INTRODUCTION: The objective of this study was to analyze the short-term and long-term effects of miniscrew-assisted rapid palatal expansion (MARPE) and conventional rapid palatal expansion (RPE) appliances on cranial and circummaxillary sutures as compared with a matched control group. METHODS: One hundred and eighty cone-beam computed tomography scans for 60 subjects were evaluated for the 3 groups: (1) MARPE (n = 20; aged 13.7 ± 1.74 years), (2) RPE (n = 21; age 13.9 ± 1.14 years), and (3) control (n = 19; age 13.3 ± 1.49 years) at pretreatment (T1), postexpansion (T2), and posttreatment (T3) (T1 to T3: MARPE, 2 years 8 months; RPE, 2 years 9 months; control, 2 years 7 months). Frontonasal suture, frontomaxillary suture, zygomaticomaxillary suture, zygomaticofrontal suture, intermaxillary suture, pterygomaxillary suture, nasomaxillary suture, and zygomaticotemporal suture were measured on the right and left sides for all 3 time labels. In addition, midpalatal suture was measured at the incisor, canine, and molar levels. RESULTS: Within-group analysis showed that MARPE and RPE led to a significant increase in the widths of frontonasal, frontomaxillary, intermaxillary, nasomaxillary, and midpalatal suture at incisor, canine, and molar levels at T2 compared with T1. Between-group analysis showed that MARPE and RPE significantly increased the width of the intermaxillary and midpalatal suture at the incisor, canine, and molar compared with controls at T2. In the long term, between-group comparisons showed no significant difference among the 3 groups except that MARPE led to a significant increase in the width of midpalatal suture at incisor, canine, and molar levels compared with RPE and controls at T3. CONCLUSIONS: MARPE led to a significant increase in the width of the midpalatal suture at incisor, canine, and molar levels compared with RPE and controls in the long term. There was no difference in the width of other cranial and circummaxillary sutures among the 3 groups in the long term.

Assessment of clear aligner accuracy of 2 clear aligners systems.

INTRODUCTION: This study compared treatment efficacy for specific tooth movements between 2 clear aligner systems (Clarity [3M Oral Care Solutions, St Paul, Minn] and Invisalign [Align Technology, San Jose, Calif]). METHODS: The study sample included 47 patients (7 males, 40 females; mean age, 36.57 ± 15.97 years) treated with Invisalign and 37 (4 males, 33 females; mean age, 34.30 ± 16.35 years) treated with Clarity aligners who completed their first set of aligners and had an initial refinement scan. Initial and predicted models were obtained from the initial simulated treatment plan. The first model of the refinement scan was labeled as achieved. SlicerCMF software (version 3.1; http://www.slicer.org) was used to superimpose the achieved and predicted digital models over the initial ones with regional superimposition on the relatively stable first molars. Nine hundred forty teeth in the Invisalign system were measured for horizontal, vertical, and angular movements and transverse width and compared with similar measurements of 740 teeth for the Clarity aligners. The deviation from the predicted was calculated and compared between both systems. RESULTS: The deviation achieved from the predicted was significant between the groups for the mandibular interpremolar and intercanine widths (P <0.05). Clarity aligners significantly undercorrected rotations compared with Invisalign for the mandibular first premolars, mandibular canines, maxillary canines, and maxillary central incisors. There was no statistically significant difference between the groups for the achieved vs predicted movements in the horizontal and vertical planes (P >0.05). CONCLUSIONS: The efficacy of clear aligner therapy systems (Clarity and Invisalign) in treating mild and moderate malocclusions was comparable. Deviation of the achieved movements from the predicted was greatest for rotational and vertical movements.

How does alendronate affect orthodontic tooth movement in osteogenesis imperfecta: an in vivo study on a mice model.

OBJECTIVES: The purpose of this study was to evaluate the effects of alendronate on orthodontic tooth movement (OTM) and bone modelling/remodelling in an osteogenesis imperfecta (OI) mice model. MATERIALS AND METHODS: Ten-week-old male and female OI mice (Col1a2oim, n = 32) were divided into four groups: 1. Alendronate male (AM, n = 8), 2. Alendronate female (AF, n = 8), 3. saline male (SM, n = 8), and 4. saline female (SF, n = 8). The mice in all four groups received either Alendronate (0.05 mg/kg) or vehicle (saline 0.05 mg/kg) subcutaneously for 2 weeks prior to the placement of orthodontic spring. A nickel-titanium spring applying 3-5 cN of force was used to perform the OTM for 1 week. After 7 days of OTM, the OI mice were euthanized with CO2 inhalation and microfocus computed tomography and histological analyses were performed. RESULTS: AM and AF mice showed a significant decrease (P < 0.05) in the rate of OTM compared with SM and SF mice, respectively. In addition, AM and AF mice showed a significant increase (P < 0.05) in the bone volume fraction (BVF) and tissue density (TD) compared with SM and SF mice. Histological analysis of haematoxylin-eosin staining revealed a hyalinization zone in AM and AF mice compared with SM and SF mice. Furthermore, tartrate-resistant acid phosphatase staining indicated decreased number of osteoclasts in AM and AF mice compared with SM and SF mice. Picrosirius red staining showed, Alendronate treatment led to thick uniform and smooth morphology of collagen fibres as compared with saline group. Similarly, second harmony generation images also revealed thicker collagen fibres at the periodontal ligament (PDL)-cementum entheses and PDL-alveolar bone entheses in AM and AF mice compared with SM and SF mice. CONCLUSIONS: Alendronate led to a decrease in the rate of OTM, increase in BVF and TD, decrease in the number of osteoclasts, and smooth and thick collagen fibres compared with saline in both male and female OI mice.

Comparative Evaluation of a Lower-Dose CBCT Acquisition Protocol for Preoperative Implant Site Assessment in Dry Human Skulls: A Proof-of-Concept Study.

Restoration of edentulous sites with dental implants is increasingly becoming a popular choice. Cross-sectional 3-dimensional imaging using cone-beam computed tomography (CBCT) provides a better depiction of the implant site to help the clinician plan the procedure better. In spite of the advantages, radiation dose will always remain a concern. The evolution of lower-dose protocols is ongoing, but whether those acquisition protocols yield comparable diagnostic information is still not well established. The objective of this study was to evaluate the diagnostic efficacy of a low-dose, 180° rotational CBCT acquisition protocol for evaluating a potential implant site in comparison with a conventional 360° rotational acquisition. Ten dentate and partially edentulous dry human skulls providing 82 randomized implant sites-40 in the maxilla and 42 in the mandible-were chosen for this study. Each skull was imaged using a 360° and a 180° rotational acquisition on a J. Morita Accuitomo CBCT scanner. Evaluation of cortical and trabecular bone, height, width, and proximity to critical structures, such as the inferior alveolar nerve canal and the maxillary sinus, were measured. An oral surgeon and an oral radiologist rated the diagnostic efficacy of the scans by evaluating the above characteristics. Statistical evaluation of the data with linear regression showed significant agreement between both protocol measurements. Kappa analyses yielded a good interobserver agreement. In this proof-of-concept study, CBCT imaging using the lower-dose, modified arc, and 180° acquisition protocol shows comparable results to the conventional 360° protocol for preoperative implant assessment.

Long-term effects on alveolar bone with bone-anchored and tooth-anchored rapid palatal expansion.

INTRODUCTION: The purpose of this study was to evaluate the long-term effects of bone-anchored and tooth-anchored expansion appliances on alveolar bone in vertical and horizontal dimensions, compared with controls, using cone-beam computed tomography. METHODS: We evaluated 180 cone-beam computed tomography scans for 60 patients at 3-time points: T1 (pretreatment), T2 (postexpansion), and T3 (posttreatment), for 3 groups: bone-anchored expansion appliance (BA), tooth-anchored expansion appliance (TA), and controls (T1-T3: BA, 2 years 8 months; TA, 2 years 9 months; control: 2 years 7 months). The intermolar width, molar angulation, palatal width, vertical buccal bone height, buccal bone thickness at the alveolar crest, and root apex were measured in the 3 groups at different time points. RESULTS: In the short term, both BA and TA led to a statistically significant increase in the intermolar width and vertical buccal bone loss after expansion compared with controls. Vertical buccal bone loss was significantly greater in TA than in BA. In addition, TA led to significantly increased molar angulation (buccal tipping) compared with controls at T2. There were no significant differences in the 3 groups in the long term except vertical buccal bone loss, which was significantly greater in TA than controls. A substantial correlation was found between molar angulation and vertical buccal bone loss, and a moderate negative correlation was found between intermolar width and buccal bone thickness at the alveolar crest at T3. CONCLUSIONS: There was no difference in the treatment outcomes between the 3 groups in the long term except vertical buccal bone loss, which was significantly increased in the TA group compared with controls.

Variability associated with mandibular ramus area thickness and depth in subjects with different growth patterns, gender, and growth status.

INTRODUCTION: The purpose of this study was to quantitatively evaluate the ramus bone parameters (ramus thickness and ramus depth) for miniscrew placement. An additional aim was to compare and contrast the ramus bone parameters in growing and nongrowing male and female subjects with hyperdivergent, normodivergent, hypodivergent facial types. METHODS: Cone-beam computed tomography scans of 690 subjects were evaluated. They were classified in terms of growth status, gender, and facial type. Ramus thickness was measured as the distance from the outer (buccal) to the inner (lingual) aspects of the mandibular ramus. Ramus depth was measured as the distance from the anterior border of the ramus to the inferior alveolar nerve canal. The measurements for ramus thickness and ramus depth were performed at 3 different levels bilaterally: (1) occlusal plane (OP), (2) 5 mm above the occlusal plane (5OP), and (3) 10 mm above the occlusal plane (10OP). RESULTS: Males showed a significantly higher ramus thickness than females (P <0.05). Ramus thickness decreased significantly (P <0.05) as we moved superior from the level of OP to 5OP and 10OP in all 3 facial types in both females (growing and nongrowing) and males (growing and nongrowing). Growing females and growing males had significantly higher ramus thickness than nongrowing females and nongrowing males, respectively. Ramus depth increased as we moved higher from the OP to 10OP. Hyperdivergent facial type showed a significantly reduced ramus depth compared with hypodivergent and normodivergent facial type in growing and nongrowing males and females at all 3 locations, namely OP, 5OP, and 10OP (P <0.05). CONCLUSIONS: Because of adequate ramus depth and ramus thickness, 5OP was considered the optimal insertion site for the placement of miniscrews. Patients with a hyperdivergent facial type showed significantly reduced ramus depth than hypodivergent and normodivergent facial types. Ramus thickness in males was significantly higher than in females in all facial types.

Long-term effects of conventional and miniscrew-assisted rapid palatal expansion on root resorption.

INTRODUCTION: The purpose of this study was to use cone-beam computed tomography to compare immediate and long-term effects of conventional and miniscrew-assisted rapid palatal expansion (MARPE) appliances on root resorption in 2 treatment groups and a control group. METHODS: One hundred eighty cone-beam computed tomography images of 60 patients at 3 time points were assessed: initial, postexpansion, and debond. The patients were divided into 3 groups: control (n = 19), rapid palatal expansion (RPE) appliance (n = 21), and MARPE (n = 20). The period of initial to debond varied for the 3 groups: 2 years, 7 months for controls; 2 years, 9 months for RPE; and 2 years, 8 months for MARPE. The length of mesiobuccal, distobuccal, and palatal root of the maxillary first molar (1M); the buccal root of maxillary first premolar; and second premolar were measured. The inclination of the 1M, intercuspal width (ICW), interroot width (IRW), ICW/IRW ratio, maxillary skeletal width were measured in all 3 groups at different time points. RESULTS: Immediately after expansion, RPE and MARPE groups showed a significant increase in the molar inclination, ICW, ICW/IRW ratio, and maxillary skeletal width compared with controls at postexpansion. However, the long-term comparison did not show any significant difference for root resorption and expansion parameters between the 3 groups, except the ICW/IRW ratio, which was higher in MARPE than controls at debond. A significant negative association was observed between the length of the mesiobuccal root of 1M and molar inclination (ß = -0.025; 95% confidence interval, -0.050 to 0.0008; P <0.05). The expansion of ICW and IRW did not show a significant association with root resorption. CONCLUSIONS: The long-term outcomes showed no difference in the amount of root resorption between the RPE, MARPE, and control groups. Molar inclination showed a significant negative association with the length of the mesiobuccal root of the 1M.

Vitamin E enriched diet increases the rate of orthodontic tooth movement.

INTRODUCTION: Vitamin E is a popular antioxidant suggested to affect bone turnover. However, the effects of a vitamin E enriched diet on the rate of tooth movement are unknown. Therefore, this study aimed to evaluate tooth movement in rats receiving a vitamin E enriched diet. In addition, we examined bone remodeling in experimental and control rats. METHODS: Thirty-two 6-week-old male rats were divided into 4 groups: (1) group 1 (n = 8): orthodontic tooth movement (OTM) for 4 days + regular diet; (2) group 2 (n = 8): OTM for 14 days + regular diet; (3) group 3 (n = 8): OTM for 4 days + vitamin E diet; and (4) group 4 (n = 8) - OTM for 14 days + vitamin E diet. Maxillary alveolar bones and femurs of rats were analyzed by microcomputed tomography and histology. RESULTS: Rats fed a vitamin E diet presented an increased OTM rate at days 4 and 14. We found an increased number of osteoclasts and decreased bone volume in the vitamin E diet group at day 14 of OTM. In addition, there was increased expression of the microphthalmia-associated transcription factor in the alveolar bone of the vitamin E diet group. In contrast, there was no difference in bone remodeling in femurs or alveolar bone at the control side. CONCLUSIONS: We found that an enriched vitamin E diet increases the rate of OTM in rats, suggesting that vitamin E may be useful as an avenue to accelerate OTM.

Radiographic and histological assessment of root resorption associated with conventional and mini-screw assisted rapid palatal expansion: a systematic review.

BACKGROUND AND OBJECTIVES: The aim of this systematic review and meta-analysis was to evaluate root resorption after maxillary expansion with conventional rapid palatal expansion (RPE) and mini-screw assisted rapid palatal expansion appliances (MARPE) using 2D and 3D radiographic methods and histologic methods of measuring root resorption. SEARCH METHODS AND SELECTION CRITERIA: A search of PubMed/MEDLINE, Scopus, Cochrane Central Register of Controlled Trials, CINAHL, Web of Science, Global Index Medicus, Dissertations & Theses Global, ClinicalTrials.gov registry, ISRCTN Registry, National Research Register, OpenGrey, and the Trip Database was performed. The studies that had analysed root resorption after RPE or MARPE were selected for the systematic review. DATA COLLECTION AND ANALYSIS: The database research, elimination of duplicate studies, data extraction, and risk of bias were performed by the authors independently and in duplication. This systematic review included prospective studies to evaluate root resorption following RPE after tooth-borne (TB), tooth-tissue borne (TTB), bone-borne (BB), and tooth-bone borne (TBB) expansion appliances. RESULTS: A total of 13 prospective trials (six randomized clinical trials and seven non-randomized prospective clinical trials) were identified for inclusion in this systematic review. Histological studies revealed that most teeth experience root resorption on the buccal surfaces after maxillary expansion. MARPE designs with BB and TBB expansion appliances were found to lead to reduced volumetric root resorption than conventional RPE using micro-computed tomography. However, one study using cone beam computed tomography showed no difference in the root resorption with MARPE and RPE designs. CONCLUSIONS AND IMPLICATIONS: Maxillary expansion with RPE can lead to root resorption of maxillary posterior teeth. Root resorption occurs more frequently on buccal surfaces on maxillary posterior teeth. Limited evidence suggests that MARPE may lead to reduced root resorption than RPE. REGISTRATION: This systematic review was conducted following the Cochrane handbook for systematic reviews and interventions and reported according to the guidelines of Preferred Reporting Items for Systematic Reviews and Meta-Analyses. The protocol was registered at PROSPERO database (https://www.crd.york.ac.uk/prospero/; registration number: PROSPERO CRD42021271181).

Variability of the maxillary suture maturation and density in the subjects with different sex and growth status.

INTRODUCTION: The objective of this study was to classify median palatine suture (MPS) maturation type in young and adult patients. Additionally, we compared MPS maturity type and density based on sex and growth status. MATERIALS AND METHODS: In this retrospective cone beam computed tomography study, we included a total of 221 subjects, grouped based on sex and growth status. Once scans were aligned and oriented in the sagittal view, we conducted our evaluations on the axial sections. Based on interdigitation and shape, the MPS were categorized into Maturation Types A through E. Additionally, MPS density was measured as Hounsfield unit equivalent pixel intensity value scale for anterior and posterior sutural regions. RESULTS: The majority of male (39%) and female (42%) subjects had MPS Maturation Type C. A maximum number of growing (42%) patients had Type C and nongrowing subjects (39%) had Type E sutures. The sex comparison showed significantly lower (p < .001) MPS density for both anterior and posterior regions in males when compared to females. Additionally, for the posterior region, nongrowing males had significantly lower (p < .001) MPS density when compared to nongrowing females. Subgroup comparisons of the MPS densities between growing and nongrowing males and growing and nongrowing females showed a significant difference (p < .001). CONCLUSION: Classification of the MPS based on the maturation types provides a reliable predictor for orthodontic treatment planning. MPS density is significantly higher in females as compared to males. Similarly, nongrowing individuals have significantly higher MPS density compared to growing individuals for both anterior and posterior locations.