A green rust-coated expanded perlite particle electrode-based adsorption coupling with the three-dimensional electrokinetics that enhances hexavalent chromium removal.

A green rust-coated expanded perlite (GR-coated Exp-p) microelectrode was synthesized and incorporated into a column-mode three-dimensional electrokinetic (3D-EK) platform to effectively pursue a continuous Cr(VI) removal from the aqueous solution. Brucite-like layers of GR were decorated onto the Exp-p material. The molar ratio of Fe(II) to Fe(III) played a most vital role among the three synthesis factors in influencing the performance of the particle electrode. For the equilibrium adsorption experiments, the target maximum adsorption capacity of 122 mg/g was predicted by a target optimizer and desirability function at the conditions following the pH of 4.7, the initial concentration of 172.4 mg/L, the dosage of 0.28 g/L, and the temperature of 28.96 °C, respectively. SO42-, Cl-, and NO3- fiercely competed with Cr(VI) anions in the acidic conditions for the locally positive sites. A low concentration and a slow flow were favored in the column-mode 3D-EK platform. The pseudo-first-order and Langmuir models were suitable for describing the kinetics and isotherms of the adsorption process, respectively. Cr(VI) anions were electrostatically attracted to the silanol groups and GR surface of the adsorbent, subsequently reduced in both heterogeneity and homogeneity, and finally immobilized by coordinating with silanediol groups and silanetriol groups.

New method for calculating the windward area of irregular fragments.

Average windward area is an important index for calculating the trajectory, velocity attenuation and terminal effect of explosive fragments. In order to solve the problems that existing theoretical method cannot calculate windward area of irregular fragment and experiment method is not convenient for automatic calculation and has low accuracy, a Monte Carlo subdivision projection simulation algorithm is proposed. The average windward area of arbitrary shaped fragments can be obtained with coordinate translation, random rotation, plane projection, convex-hull triangulation, concave boundary searching and sorting with maximum edge length constraint, subdivision area calculation, and averaging by thousands of cycles. Results show that projection area obtained by the subdivision projection algorithm is basically the same as that obtained by software method of computer aided design. Moreover, the maximum calculation error of the algorithm is less than 7%, and its accuracy is much higher than that of the equivalent ellipsoid method. The average windward area calculated by the Monte Carlo subdivision projection simulation algorithm is consistent with theoretical formula for prefabricated fragments, and the error is less than 3%. The convergence and accuracy of the Monte Carlo subdivision projection algorithm are better than those of the icosahedral uniform orientation method.

Self-cementation of gold tailings activated by nonthermal plasma irradiated calcium (hydro)oxide.

The alkalinity of CaO is commonly insufficient in alkali-activating raw soils or minerals for the formation of cementation or geopolymerization. In this study, nonthermal plasma (NTP) irradiation was employed to activate traditional CaO to enhance its efficacy in alkali activation and further intensify the self-cementation of gold tailings. The solidification/stabilization (S/S) of the gold tailings-based matrix activated by NTP-CaO was better than that of CaO. The NTP irradiation enhanced the surface hydroxyl groups and oxygen atoms, decreased the binding energy, formed nanoparticles, and significantly changed the morphologies of the calcium activator. The dosage of the NTP-irradiated CaO (NTP-CaO) directly affected the self-cemented solidification/stabilization of gold tailings. The Johnson-Mehl-Avrami-Kolmogorov model was appropriate for analysing the NTP-CaO-activated geopolymerization kinetics of gold tailings. Three-dimensional (3D) structural minerals covered with small pores were determined in the NTP-CaO-activated cemented samples. The employment of NTP-CaO facilitated the formation of aluminosilicate geopolymers during the self-cementation of gold tailings according to comprehensive characterization strategies. The study achieves the efficient self-remediation of gold tailings by activating calcium precursors, which further solves the contradiction between salinization and alkali activation in the field of noncalcined cementitious materials.

Effect of metal oxides on the light radiation intensity of Ba(NO3)2/Mg-containing pyrotechnic mixtures combustion.

Studying how to improve the performance of illuminating agents to meet the requirements of ammunition miniaturization of great importance. In this study, a simple method for increasing light radiation intensity through the adding of metal oxides was developed and tested. Results revealed that the metal oxides had a very strong effect on the light radiation intensity of the reaction system. Optical radiation intensity increased by 17.8%, - 5.4% and 25.9% after the addition 5% of MgO, Al2O3 and BaO to the Ba(NO3)2/Mg reaction system, respectively. This phenomenon may be related to the light radiation characteristics and reactivity of the metal oxide itself, as well as the temperature at which the added metal oxide can be excited to radiate light intensity.

Microwave irradiation coupled with zero-valent iron that enhances the composite geopolymerization of chromite ore processing residue and its mechanisms.

In this work, microwave (MW) irradiation was employed to enhance the zero-valent iron (ZVI)-dominated de-contamination of chromite ore processing residue (COPR). A coupling system and the traditional two-step procedure were both conducted to evaluate the effects of MW irradiation on the reduction and the incorporation of COPR into the composite materials-based geopolymers. The factors including the ratios of liquid to solid, the mass ratios of ZVI to COPR, and the acid dosage had some obvious influence on the reduction of COPR in the MW system. The compressive strengths of 31.54 and 41.56 MPa were determined from the two-step procedure and the coupling system at the COPR dosage of 10% (mass ratio), respectively. The employment of MW irradiation not only strengthened the formation of the geopolymer matrices but also improved the chemical stabilization of Cr species in the solidified blocks. The coupled process was more conducive to incorporating the treated COPR into the geopolymer-based crystalline microstructures compared with the subsequent usage of ZVI reduction and MW irradiation.