RESUMO
Separating ethane (C2H6) from ethylene (C2H4) is an essential and energy-intensive process in the chemical industry. Here, we report two flexible diamondoid coordination networks, X-dia-1-Ni and X-dia-1-Ni0.89Co0.11, that exhibit gate-opening between narrow-pore (NP) and large-pore (LP) phases for C2H6, but not for C2H4. X-dia-1-Ni0.89Co0.11 thereby exhibited a type F-IV isotherm at 273 K with no C2H6 uptake and a high uptake (111 cm3 g-1, 1 atm) for the NP and LP phases, respectively. Conversely, the LP phase exhibited a low uptake of C2H4 (12.2 cm3 g-1). This C2H6/C2H4 uptake ratio of 9.1 for X-dia-1-Ni0.89Co0.11 far surpassed those of previously reported physisorbents, many of which are C2H4-selective. In situ variable-pressure X-ray diffraction and modeling studies provided insight into the abrupt C2H6-induced structural NP to LP transformation. The promise of pure gas isotherms and, more generally, flexible coordination networks for gas separations was validated by dynamic breakthrough studies, which afforded high-purity (99.9%) C2H4 in one step.
RESUMO
A 44.610.8 topology hybrid ultramicroporous material (HUM), {[Cu1.5F(SiF6)(L)2.5]·G}n, (L = 4,4'-bisimidazolylbiphenyl, G = guest molecules), 1, formed by cross-linking interpenetrated 3D four-connected CdSO4-type nets with hexafluorosilicate anions is synthesized and evaluated in the context of gas sorption and separation herein. 1 is the first HUM functionalized with two different types of fluorinated sites (SiF6 2- and F- anions) lining along the pore surface. The optimal pore size (≈5 Å) combining mixed and high-density electronegative fluorinated sites enable 1 to preferentially adsorb C2H2 over CO2 and C2H4 by hydrogen bonding interactions with a high C2H2 isosteric heat of adsorption (Qst) of ≈42.3 kJ mol-1 at zero loading. The pronounced discriminatory sorption behaviors lead to excellent separation performance for C2H2/CO2 and C2H2/C2H4 that surpasses many well-known sorbents. Dynamic breakthrough experiments are conducted to confirm the practical separation capability of 1, which reveal an impressive separation factor of 6.1 for equimolar C2H2/CO2 mixture. Furthermore, molecular simulation and density functional theory (DFT) calculations validate the strong binding of C2H2 stems from the chelating fix of C2H2 between SiF6 2- anion and coordinated F- anion.
RESUMO
Developing high-performance porous materials to separate ethane from ethylene is an important but challenging task in the chemical industry, given their similar sizes and physicochemical properties. Herein, a new type of ultra-strong C2H6 nano-trap, CuIn(3-ain)4 is presented, which utilizes multiple guest-host interactions to efficiently capture C2H6 molecules and separate mixtures of C2H6 and C2H4. The ultra-strong C2H6 nano-trap exhibits the high C2H6 (2.38 mmol g-1) uptake at 6.25 kPa and 298 K and demonstrates a remarkable selectivity of 3.42 for C2H6/C2H4 (10:90). Additionally, equimolar C2H6/C2H4 exhibited a superior high separation potential ∆Q (2286 mmol L-1) at 298 K. Kinetic adsorption tests demonstrated that CuIn(3-ain)4 has a high adsorption rate for C2H6, establishing it as a new benchmark material for the capture of C2H6 and the separation of C2H6/C2H4. Notably, this exceptional performance is maintained even at a higher temperature of 333 K, a phenomenon not observed before. Theoretical simulations and single-crystal X-ray diffraction provide critical insights into how selective adsorption properties can be tuned by manipulating pore dimensions and geometry. The excellent separation performance of CuIn(3-ain)4 has been confirmed through breakthrough experiments for C2H6/C2H4 gas mixtures.
RESUMO
The conversion of CO2 into valuable carbon-based products using clean and renewable solar energy has been a significant challenge in photocatalysis. It is of paramount importance to develop efficient photocatalysts for the catalytic conversion of CO2 using visible light. In this study, the Ni-MOF-74 material is successfully modified to achieve a highly porous structure (Ni-74-Am) through temperature and solvent modulation. Compared to the original Ni-MOF-74, Ni-74-Am contains more unsaturated Ni active sites resulting from defects, thereby enhancing the performance of CO2 photocatalytic conversion. Remarkably, Ni-74-Am exhibits outstanding photocatalytic performance, with a CO generation rate of 1380 µmol g-1 h-1 and 94% CO selectivity under visible light, significantly surpassing the majority of MOF-based photocatalysts reported to date. Furthermore, experimental characterizations reveal that Ni-74-Am has significantly higher efficiency of photogenerated electron-hole separation and faster carrier migration rate for photocatalytic CO2 reduction. This work enriches the design and application of defective MOFs and provides new insights into the design of MOF-based photocatalysts for renewable energy and environmental sustainability. The findings of this study hold significant promise for developing efficient photocatalysts for CO2 reduction under visible-light conditions.
RESUMO
Considering the significant application of acetylene (C2 H2 ) in the manufacturing and petrochemical industries, the selective capture of impurity carbon dioxide (CO2 ) is a crucial task and an enduring challenge. Here, a flexible metal-organic framework (Zn-DPNA) accompanied by a conformation change of the Me2 NH2 + ions in the framework is reported. The solvate-free framework provides a stepped adsorption isotherm and large hysteresis for C2 H2 , but type-I adsorption for CO2 . Owing to their uptakes difference before gate-opening pressure, Zn-DPNA demonstrated favorable inverse CO2 /C2 H2 separation. According to molecular simulation, the higher adsorption enthalpy of CO2 (43.1 kJ mol-1 ) is due to strong electrostatic interactions with Me2 NH2 + ions, which lock the hydrogen-bond network and narrow pores. Furthermore, the density contours and electrostatic potential verifies the middle of the cage in the large pore favors C2 H2 and repels CO2 , leading to the expansion of the narrow pore and further diffusion of C2 H2 . These results provide a new strategy that optimizes the desired dynamic behavior for one-step purification of C2 H2 .
RESUMO
We report that linker ligand substitution involving just one atom induces a shape-memory effect in a flexible coordination network. Specifically, whereas SIFSIX-23-Cu, [Cu(SiF6 )(L)2 ]n , (L=1,4-bis(1-imidazolyl)benzene, SiF6 2- =SIFSIX) has been previously reported to exhibit reversible switching between closed and open phases, the activated phase of SIFSIX-23-CuN , [Cu(SiF6 )(LN )2 ]n (LN =2,5-bis(1-imidazolyl)pyridine), transformed to a kinetically stable porous phase with strong affinity for CO2 . As-synthesized SIFSIX-23-CuN , α, transformed to less open, γ, and closed, ß, phases during activation. ß did not adsorb N2 (77â K), rather it reverted to α induced by CO2 at 195, 273 and 298â K. CO2 desorption resulted in α', a shape-memory phase which subsequently exhibited type-I isotherms for N2 (77â K) and CO2 as well as strong performance for separation of CO2 /N2 (15/85) at 298â K and 1â bar driven by strong binding (Qst =45-51â kJ/mol) and excellent CO2 /N2 selectivity (up to 700). Interestingly, α' reverted to ß after re-solvation/desolvation. Molecular simulations and density functional theory (DFT) calculations provide insight into the properties of SIFSIX-23-CuN .
RESUMO
The enrichment and purification of coal-bed methane provides a source of energy and helps offset global warming. In this work, we demonstrate a strategy involving the regulation of the pore size and pore chemistry to promote the separation of CH4 /N2 mixtures in four nickel-based coordination networks, named Ni(ina)2 , Ni(3-ain)2 , Ni(2-ain)2 , and Ni(pba)2 , (where ina=isonicotinic acid, 3-ain=3-aminoisonicotinic acid, 2-ain=2-aminoisonicotinic acid, and pba=4-(4-pyridyl)benzoic acid). Among them, Ni(ina)2 and Ni(3-ain)2 can effectively separate CH4 from N2 with top-performing performance because of the suitable pore size (≈0.6 and 0.5â nm) and pore environment. Explicitly, Ni(ina)2 exhibits the highest ever reported CH4 /N2 selectivity of 15.8 and excellent CH4 uptake (40.8â cm3 g-1 ) at ambient conditions, thus setting new benchmarks for all reported MOFs and traditional adsorbents. The exceptional CH4 /N2 separation performance of Ni(ina)2 is confirmed by dynamic breakthrough experiments. Under different CH4 /N2 ratios, Ni(ina)2 selectively extracts methane from the gaseous blend and produces a high purity of CH4 (99 %). Theoretical calculations and CH4 -loading single-crystal structure analysis provide critical insight into the adsorption/separation mechanism. Ni(ina)2 and Ni(3-ain)2 can form rich intermolecular interactions with methane, indicating a strong adsorption affinity between pore walls and CH4 molecules. Importantly, Ni(ina)2 has good thermal and moisture stability and can easily be scaled up at a low cost ($25 per kilogram), which will be valuable for potential industrial applications. Overall, this work provides a powerful approach for the selective adsorption of CH4 from coal-bed methane.
RESUMO
In the electronics industry, the efficient recovery and capture of sulfur hexafluoride (SF6 ) from SF6 /N2 mixtures is of great importance. Herein, three metal-organic frameworks with fine-tuning pore structures, Cu(peba)2 , Ni(pba)2 , and Ni(ina)2 , were designed for SF6 capture. Among them, Ni(ina)2 has perfect pore sizes (6â Å) that are comparable to the kinetic diameter of sulfur hexafluoride (5.2â Å), affording the benchmark binding affinity for SF6 gas. Ni(ina)2 exhibits the highest SF6 /N2 selectivity (375.1 at 298â K and 1â bar) and ultra-high SF6 uptake capacity (53.5â cm3 g-1 at 298â K and 0.1â bar) at ambient conditions. The remarkable separation performance of Ni(ina)2 was verified by dynamic breakthrough experiments. Theoretical calculations and the SF6 -loaded single-crystal structure provided critical insight into the adsorption/separation mechanism. This porous coordination network has the potential to be used in industrial applications.
RESUMO
Structural changes at the active site of an enzyme induced by binding to a substrate molecule can result in enhanced activity in biological systems. Herein, we report that the new hybrid ultramicroporous material sql-SIFSIX-bpe-Zn exhibits an induced fit binding mechanism when exposed to acetylene, C2 H2 . The resulting phase change affords exceptionally strong C2 H2 binding that in turn enables highly selective C2 H2 /C2 H4 and C2 H2 /CO2 separation demonstrated by dynamic breakthrough experiments. sql-SIFSIX-bpe-Zn was observed to exhibit at least four phases: as-synthesised (α); activated (ß); and C2 H2 induced phases (ß' and γ). sql-SIFSIX-bpe-Zn-ß exhibited strong affinity for C2 H2 at ambient conditions as demonstrated by benchmark isosteric heat of adsorption (Qst ) of 67.5â kJ mol-1 validated through in situ pressure gradient differential scanning calorimetry (PG-DSC). Further, in situ characterisation and DFT calculations provide insight into the mechanism of the C2 H2 induced fit transformation, binding positions and the nature of host-guest and guest-guest interactions.
RESUMO
Closed-to-open structural transformations in flexible coordination networks are of potential utility in gas storage and separation. Herein, we report the first example of a flexible SiF62--pillared square grid material, [Cu(SiF6)(L)2]n (L = 1,4-bis(1-imidazolyl)benzene), SIFSIX-23-Cu. SIFSIX-23-Cu exhibits reversible switching between nonporous (ß1) and several porous (α, γ1, γ2, and γ3) phases triggered by exposure to N2, CO2, or H2O. In addition, heating ß1 to 433 K resulted in irreversible transformation to a closed polymorph, ß2. Single-crystal X-ray diffraction studies revealed that the phase transformations are enabled by rotation and geometrical contortion of L. Density functional theory calculations indicated that L exhibits a low barrier to rotation (as low as 8 kJmol-1) and a rather flat energy surface. In situ neutron powder diffraction studies provided further insight into these sorbate-induced phase changes. SIFSIX-23-Cu combines stability in water for over a year, high CO2 uptake (ca. 216 cm3/g at 195 K), and good thermal stability.
RESUMO
Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas-storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate-opening and gate-closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine-tune gate-opening and gate-closing pressure. Specifically, three variants of a previously reported pcu-topology MOF, X-pcu-5-Zn, have been prepared: X-pcu-6-Zn, 6=1,2-bis(4-pyridyl)ethane (bpe), X-pcu-7-Zn, 7=1,2-bis(4-pyridyl)acetylene (bpa), and X-pcu-8-Zn, 8=4,4'-azopyridine (apy). Each exhibited switching isotherms but at different gate-opening pressures. The N2 , CO2 , C2 H2 , and C2 H4 adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6, afforded lower gate-opening and gate-closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.
RESUMO
Purification of the C8 aromatics (xylenes and ethylbenzene) is particularly challenging because of their similar physical properties. It is also relevant because of their industrial utility. Physisorptive separation of C8 aromatics has long been suggested as an energy efficient solution but no physisorbent has yet combined high selectivity (>5) with high adsorption capacity (>50â wt %). Now a counterintuitive approach to the adsorptive separation of o-xylene from other C8 aromatics involves the study of a known nonporous layered material, [Co(bipy)2 (NCS)2 ]n (sql-1-Co-NCS), which can reversibly switch to C8 aromatics loaded phases with different switching pressures and kinetics, manifesting benchmark o-xylene selectivity (SOX/EB ≈60) and high saturation capacity (>80â wt %). Structural insight into the observed selectivity and capacity is gained by analysis of the crystal structures of C8 aromatics loaded phases.
RESUMO
We report a 2-fold interpenetrated primitive cubic (pcu) network X-pcu-5-Zn, [Zn2(DMTDC)2(dpe)] (H2DMTDC = 3,4-dimethylthieno[2,3- b]thiophene-2,5-dicarboxylic acid, dpe = 1,2-di(4-pyridyl)ethylene), that exhibits reversible switching between an as-synthesized "open" phase, X-pcu-5-Zn-α, and two nonporous or "closed" polymorphs, X-pcu-5-Zn-ß and X-pcu-5-Zn-γ. There are two unusual features of X-pcu-5-Zn. The first relates to its sorption properties, which reveal that the α form exhibits high CO2 uptake (ca. 255 cm3/g at 195 K) via reversible closed-to-open switching (type F-IV isotherm) of the type desirable for gas and vapor storage; there are only three other reports of porous materials that combine these two features. Second, we could only isolate the ß form by activation of the CO2 loaded α form and it persists through multiple CO2 adsorption/desorption cycles. We are unaware of a new polymorph having been isolated in such a manner. That the observed phase changes of X-pcu-5-Zn-α occur in single-crystal-to-single-crystal fashion enabled structural characterization of the three forms; γ is a coordination isomer of α and ß, both of which are based upon "paddlewheel" clusters.
RESUMO
Removal of CO2 from CO gas mixtures is a necessary but challenging step during production of ultra-pure CO as processed from either steam reforming of hydrocarbons or CO2 reduction. Herein, two hybrid ultramicroporous materials (HUMs), SIFSIX-3-Ni and TIFSIX-2-Cu-i, which are known to exhibit strong affinity for CO2 , were examined with respect to their performance for this separation. The single-gas CO sorption isotherms of these HUMs were measured for the first time and are indicative of weak affinity for CO and benchmark CO2 /CO selectivity (>4000 for SIFSIX-3-Ni). This prompted us to conduct dynamic breakthrough experiments and compare performance with other porous materials. Ultra-pure CO (99.99 %) was thereby obtained from CO gas mixtures containing both trace (1 %) and bulk (50 %) levels of CO2 in a one-step physisorption-based separation process.
RESUMO
Herein, we report that a new flexible coordination network, NiL2 (L=4-(4-pyridyl)-biphenyl-4-carboxylic acid), with diamondoid topology switches between non-porous (closed) and several porous (open) phases at specific CO2 and CH4 pressures. These phases are manifested by multi-step low-pressure isotherms for CO2 or a single-step high-pressure isotherm for CH4 . The potential methane working capacity of NiL2 approaches that of compressed natural gas but at much lower pressures. The guest-induced phase transitions of NiL2 were studied by single-crystal XRD, inâ situ variable pressure powder XRD, synchrotron powder XRD, pressure-gradient differential scanning calorimetry (P-DSC), and molecular modeling. The detailed structural information provides insight into the extreme flexibility of NiL2 . Specifically, the extended linker ligand, L, undergoes ligand contortion and interactions between interpenetrated networks or sorbate-sorbent interactions enable the observed switching.
RESUMO
Porous materials capable of selectively capturing CO2 from flue-gases or natural gas are of interest in terms of rising atmospheric CO2 levels and methane purification. Size-exclusive sieving of CO2 over CH4 and N2 has rarely been achieved. Herein we show that a crystal engineering approach to tuning of pore-size in a coordination network, [Cu(quinoline-5-carboxyate)2 ]n (Qc-5-Cu) ena+bles ultra-high selectivity for CO2 over N2 (SCN ≈40 000) and CH4 (SCM ≈3300). Qc-5-Cu-sql-ß, a narrow pore polymorph of the square lattice (sql) coordination network Qc-5-Cu-sql-α, adsorbs CO2 while excluding both CH4 and N2 . Experimental measurements and molecular modeling validate and explain the performance. Qc-5-Cu-sql-ß is stable to moisture and its separation performance is unaffected by humidity.
RESUMO
Multicolored photoluminescence tuning in a single-phase material has invaluable potential in display and security applications. By deliberate design of a multifunctional antenna ligand and precise control of mixed metal ionic compositions in lanthanide metal-organic frameworks (Ln-MOFs), we achieved dichromatic fine-tuning among red, green, or blue primary colors through growth of a series of isomorphous Ln-MOF crystals·solvents of formula [LnnLn'1-n(TTP)2·H2O]Cl3 (Ln = Ln' = Eu, Tb, and Gd, 1-3; Ln = Eu, Ln' = Tb, 4-8; Ln = Gd, Ln' = Eu, 9-11; Ln = Gd, Ln' = Tb, 12-14; 0 < n < 1; TTP = 1',1â³-(2,4,6-trimethylbenzene-1,3,5-triyl)tris(methylene)tris(pyridine-4(1H)-one)). The linear dependence of the emissions were analyzed, and the mathematical matrix models were established, which are useful to control the synthetic conditions and to predict the color chromaticity coordinates under varied excitation wavelengths. The potential relevance of these multicolored photoluminescent Ln-MOFs to barcoded materials was demonstrated.
Assuntos
Elementos da Série dos Lantanídeos/química , Luminescência , Modelos Teóricos , Compostos Organometálicos/química , Cor , Cristalização , Transferência de Energia , Ligantes , Modelos QuímicosRESUMO
White-light-emitting materials and devices have attracted enormous interest because of their great potential for various lighting applications. We herein describe the light-emitting properties of a series of new difunctional organic molecules of remarkably simple structure consisting of two terminal 4-pyridone push-pull subunits separated by a polymethylene chain. They were found to emit almost "pure" white light as a single organic compound in the solid state, as well as when incorporated in a polymer film. To the best of our knowledge, they are the simplest white-light-emitting organic molecules reported to date.
RESUMO
One-step He purification from natural gas represents a crucial solution for addressing the global He shortages. The prevailing method to produce high-grade He involves cryogenic distillation and ultralow temperature adsorption processes, which is highly cost- and energy-intensive. Separating and purifying He at ambient temperature is a great challenge because the fundamental limitation lies in the boiling point, polarizability, and kinetic diameters of CH4/N2/He gases. In this study, we seek to implement a relay adsorption strategy using Ni(ina)2 and MIL-100(Cr) metal-organic frameworks (MOFs) to produce high-purity He from ternary mixtures (CH4, N2, and He) at ambient temperature. The CH4/He selectivity in Ni(ina)2 and N2/He selectivity in MIL-100(Cr) both reach record 15.39 and 128.49, respectively, making the relay adsorption for helium purification highly efficient. The breakthrough experiments show that the two MOFs can sequentially adsorb CH4 and N2 in ternary mixtures, producing He with a purity of up to 99.99% in one step. The remarkable separation performance and stability of these MOFs underscore the industrial potential in purifying He at ambient temperature.
RESUMO
Switching coordination networks (CNs) that reversibly transform between narrow or closed pore (cp) and large pore (lp) phases, though fewer than their rigid counterparts, offer opportunities for sorption-related applications. However, their structural transformations and switching mechanisms remain underexplored at the molecular level. In this study, we conducted a systematic investigation into a 2D switching CN, [Ni(bpy)2(NCS)2]n, sql-1-Ni-NCS (1 = bpy = 4,4'-bipyridine), using coincident gas sorption and in situ powder X-ray diffraction (PXRD) under low-temperature conditions. Gas adsorption measurements revealed that C2H4 (169 K) and C2H6 (185 K) exhibited single-step type F-IVs sorption isotherms with sorption uptakes of around 180-185 cm3 g-1, equivalent to four sorbate molecules per formula unit. Furthermore, parallel in situ PXRD experiments provided insight into sorbate-dependent phase switching during the sorption process. Specifically, CO2 sorption induced single-step phase switching (path I) solely between cp and lp phases consistent with the observed single-step type F-IVs sorption isotherm. By contrast, intermediate pore (ip) phases emerged during C2H4 and C2H6 desorption as well as C3H6 adsorption, although they remained undetectable in the sorption isotherms. To our knowledge, such a cp-lp-ip-cp transformation (path II) induced by C2H4/6 and accompanied by single-step type F-IVs sorption isotherms represents a novel type of phase transition mechanism in switching CNs. By virtue of Rietveld refinements and molecular simulations, we elucidated that the phase transformations are governed by cooperative local and global structural changes involving NCS- ligand reorientation, bpy ligand twist and rotation, cavity edge (Ni-bpy-Ni) deformation, and interlayer expansion and sliding.