Enhanced Performance of Blended Polymer Excipients in Delivering a Hydrophobic Drug through the Synergistic Action of Micelles and HPMCAS.

Blends of hydroxypropyl methylcellulose acetate succinate (HPMCAS) and dodecyl (C12)-tailed poly(N-isopropylacrylamide) (PNIPAm) were systematically explored as a model system to dispense the active ingredient phenytoin by rapid dissolution, followed by the suppression of drug crystallization for an extended period. Dynamic and static light scattering revealed that C12-PNIPAm polymers, synthesized by reversible addition-fragmentation chain-transfer polymerization, self-assembled into micelles with dodecyl cores in phosphate-buffered saline (PBS, pH 6.5). A synergistic effect on drug supersaturation was documented during in vitro dissolution tests by varying the blending ratio, with HPMACS primarily aiding in rapid dissolution and PNIPAm maintaining supersaturation. Polarized light and cryogenic transmission electron microscopy experiments revealed that C12-PNIPAm micelles maintain drug supersaturation by inhibiting both crystal nucleation and growth. Cross-peaks between the phenyl group of phenytoin and the isopropyl group of C12-PNIPAm in 2D 1H nuclear Overhauser effect (NOESY) spectra confirmed the existence of drug-polymer intermolecular interactions in solution. Phenytoin and polymer diffusion coefficients, measured by diffusion-ordered NMR spectroscopy (DOSY), demonstrated that the drug-polymer association constant increased with increasing local density of the corona chains, coincident with a reduction in C12-PNIPAm molecular weight. These findings demonstrate a new strategy for exploiting the versatility of polymer blends through the use of self-assembled micelles in the design of advanced excipients.

Ti-Catalyzed Multicomponent Oxidative Carboamination of Alkynes with Alkenes and Diazenes.

The inter- or intramolecular oxidative carboamination of alkynes catalyzed by [py2TiCl2NPh]2 is reported. These multicomponent reactions couple alkenes, alkynes and diazenes to form either α,ß-unsaturated imines or α-(iminomethyl)cyclopropanes via a TiII/TiIV redox cycle. Each of these products is formed from a common azatitanacyclohexene intermediate that undergoes either ß-H elimination or α,γ-coupling, wherein the selectivity is under substrate control.

Mechanistic study of the stereoselective polymerization of D,L-lactide using indium(III) halides.

We report the results of a comprehensive investigation of the recently discovered stereoselective and controlled polymerization of racemic lactide (D,L-LA) using an initiator prepared in situ from indium(III) chloride (InCl(3)), benzyl alcohol (BnOH), and triethylamine (NEt(3)). Linear relationships between number-average molecular weight (M(n)) and both monomer to alcohol concentration ratio and monomer conversion are consistent with a well-controlled polymerization. Studies on polymerization kinetics show the process to be first-order in [InCl(3)](0) and zero-order in both [BnOH](0) and [NEt(3)](0). The rate of D,L-LA conversion is also dependent on the indium(III) halide (i.e., t(1/2)(InCl(3)) approximately = 43 min versus t(1/2)(InBr(3)) approximately = 7.5 h, 21 degrees C, CD(2)Cl(2), [D,L-LA](0)/[BnOH](0) approximately = 100, [D,L-LA](0) = 0.84 M, [InX(3)](0)/[BnOH](0) = 1) and lactide stereoisomer (i.e., k(obs)(D,L-LA) approximately = k(obs)(meso-LA) > k(obs)(L-LA)). A model system that polymerizes D,L-LA with the same high degree of stereoselectivity was developed using 3-diethylamino-1-propanol (deapH) in lieu of BnOH and NEt(3). The product of the reaction of deapH with InCl(3) was identified as [InCl(3)(deapH)(H(2)O)](2) by elemental analysis, X-ray crystallography, and NMR and FTIR spectroscopies. An anhydrous version of the complex was also isolated when care was taken to avoid adventitious water, and was shown by pulsed gradient spin-echo (PGSE) NMR experiments to adopt a dinuclear structure in CD(2)Cl(2) solution under conditions identical to those used in its stereoselective polymerization of D,L-LA. The combined data suggest that the initiating species for the InCl(3)/BnOH/NEt(3) system is similar to [InCl(3)(deapH)(H(2)O)](2) and of the type [InCl((3-n))(OBn)(n)](m). With this information we propose a mechanism that rationalizes the observed stereocontrol in D,L-LA polymerizations. Finally, in an exploration of the scope of the InCl(3)/BnOH/NEt(3) system, we found this system to be effective for the polymerization of other cyclic esters, including epsilon-caprolactone and several substituted derivatives.

Permeability of Rubbery and Glassy Membranes of Ionic Liquid Filled Polymersome Nanoreactors in Water.

Nanoemulsion-like polymer vesicles (polymersomes) having ionic liquid interiors dispersed in water are attractive for nanoreactor applications. In a previous study, we demonstrated that small molecules could pass through rubbery polybutadiene membranes on a time scale of seconds, which is practical for chemical transformations. It is of interest to determine how sensitive the rate of transport is to temperature, particularly for membranes in the vicinity of the glass transition (Tg). In this work, the molecular exchange rate of 1-butylimidazole through glassy polystyrene (PS) bilayer membranes is investigated via pulsed field gradient nuclear magnetic resonance (PFG-NMR) over the temperature range from 25 to 70 °C. The vesicles were prepared by the cosolvent method in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([EMIM][TFSI]), and four different polystyrene-b-poly(ethylene oxide) (PS-PEO) diblock polymers with varying PS molecular weights were examined. The vesicles were transferred from the ionic liquid to water at room temperature to form nanoemulsion solutions of polymer vesicles in water. The exchange rate of 1-butylimidazole added to the aqueous solutions was observed under equilibrium conditions at each temperature. The exchange rate decreased as the membrane thickness increased, and the exchange rate through the glassy membranes was three to four times slower than through the rubbery polybutadiene membranes under the same experimental conditions. These results demonstrate that the permeability through nanosized membranes depends on both the dimension and chemistry of membrane-forming blocks. Furthermore, the exchange rate was investigated as a function of temperature in the vicinity of the Tg of PS-PEO membranes. The exchange rate, however, is not a strong function of the temperature in the vicinity of the membrane Tg, due to a combination of the nanoscopic dimension of the membrane, and some degree of solvent plasticization.

No-D NMR (no-deuterium proton NMR) spectroscopy: a simple yet powerful method for analyzing reaction and reagent solutions.

[reaction: see text] The title technique is a convenient and powerful method for directly monitoring or assaying any reaction mixture or reagent solution. Examples of some common processes (Fischer esterification, lithiation, butyllithium/THF compatibility, olefin metathesis, and a quantification assay), each interrogated in its native solvent, are presented. The spectral data are easy to acquire, and the information content makes a compelling case for routine use of No-D NMR spectroscopy.

Electrochemistry in Media of Exceptionally Low Polarity: Voltammetry with a Fluorous Solvent.

This work demonstrates the first cyclic voltammetry in a perfluorocarbon solvent without use of a cosolvent. The novel electrolyte tetrabutylammonium tetrakis[3,5-bis(perfluorohexyl)phenyl]borate (NBu(4)BArF(104); 80 mM) allows for voltammetry of ferrocene in perfluoro(methylcyclohexane) by lowering the specific resistance to Ω268 k cm at 20.8 °C. Despite significant solution resistance, the resulting voltammograms can be fitted quantitatively without difficulty. The thus determined standard electron transfer rate constant, k°, for the oxidation of ferrocene in perfluoro(methylcyclohexane) is somewhat smaller than for many solvents commonly used in electrochemistry, but can be explained readily as the result of the viscosity and size of the solvent using Marcus theory. Dielectric dispersion spectroscopy verifies that addition of NBu(4)BArF(104) does not significantly raise the overall polarity of the solution over that of neat perfluoro(methylcyclohexane).

Structural and mechanistic studies of bis(phenolato)amine zinc(II) catalysts for the polymerization of epsilon-caprolactone.

The syntheses, characterization, epsilon-caprolactone (CL) polymerization activity, and kinetics investigation of two zinc(II) bis(phenolato)amine complexes L2Zn2 are reported (L = methylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenolato) and/or methylamino-N,N-bis(2-methylene-4-adamantyl-6-tert-butylphenolato)). X-ray crystallographic and 1H NMR studies, including NOESY and PGSE experiments, provided insight into the solid and solution state structures, respectively, as well as evidence for the catalytically active species responsible for the ring-opening polymerization of CL. Additionally, solution polymerizations and kinetic experiments involving (L1)2Zn2 in the presence of benzyl alcohol (BnOH) were performed to elucidate the influence of catalyst structure, solvent, and the concentration dependence of the catalytically active species, CL, and BnOH on the rate and control of poly-epsilon-caprolactone (PCL) formation. The structural, polymerization, and kinetic data support equilibria involving both mononuclear and dinuclear forms of (L1)2Zn2 as well as a monomer-activated route to PCL.

NMR studies on epoxidations of allenamides. Evidence for formation of nitrogen-substituted allene oxide and spiro-epoxide via trapping experiments.

Two epoxidations of chiral allenamides are described here. While treatment with m-CPBA led to highly stereoselective formation of an alpha-keto aminal that can be useful synthetically, DMDO oxidation led to conclusive evidence for both nitrogen-substituted allene oxide (via mono-epoxidation) and spiro-epoxide (via bis-epoxidation) using intramolecular nucleophilic trapping experiments. NMR studies provide reliable evidence for a 3-oxetanone that can be derived from the spiro-epoxide and also suggest the presence of an allene oxide. Despite a facile second epoxidation as evidenced by the predominant formation of the 3-oxetanone, in the presence of furan, [4 + 3] cycloaddition of the nitrogen-substituted allene oxide or oxyallyl cation with furan occurs faster than the second epoxidation efficiently leading to cycloadducts. This rate difference plays an invaluable role for the success of a stereoselective sequential epoxidation-[4 + 3] cycloaddition reaction via DMDO epoxidations of chiral allenamides.