RESUMO
Despite the importance of proline conformational equilibria (trans versus cis amide and exo versus endo ring pucker) on protein structure and function, there is a lack of convenient ways to probe proline conformation. 4,4-Difluoroproline (Dfp) was identified to be a sensitive 19F NMR-based probe of proline conformational biases and cis-trans isomerism. Within model compounds and disordered peptides, the diastereotopic fluorines of Dfp exhibit similar chemical shifts (ΔδFF = 0-3 ppm) when a trans X-Dfp amide bond is present. In contrast, the diastereotopic fluorines exhibit a large (ΔδFF = 5-12 ppm) difference in chemical shift in a cis X-Dfp prolyl amide bond. DFT calculations, X-ray crystallography, and solid-state NMR spectroscopy indicated that ΔδFF directly reports on the relative preference of one proline ring pucker over the other: a fluorine which is pseudo-axial (i.e., the pro-4R-F in an exo ring pucker, or the pro-4S-F in an endo ring pucker) is downfield, while a fluorine which is pseudo-equatorial (i.e., pro-4S-F when exo, or pro-4R-F when endo) is upfield. Thus, when a proline is disordered (a mixture of exo and endo ring puckers, as at trans-Pro in peptides in water), it exhibits a small Δδ. In contrast, when the Pro is ordered (i.e., when one ring pucker is strongly preferred, as in cis-Pro amide bonds, where the endo ring pucker is strongly favored), a large Δδ is observed. Dfp can be used to identify inherent induced order in peptides and to quantify proline cis-trans isomerism. Using Dfp, we discovered that the stable polyproline II helix (PPII) formed in the denatured state (8 M urea) exhibits essentially equal populations of the exo and endo proline ring puckers. In addition, the data with Dfp suggested the specific stabilization of PPII by water over other polar solvents. These data strongly support the importance of carbonyl solvation and n â π* interactions for the stabilization of PPII. Dfp was also employed to quantify proline cis-trans isomerism as a function of phosphorylation and the R406W mutation in peptides derived from the intrinsically disordered protein tau. Dfp is minimally sterically disruptive and can be incorporated in expressed proteins, suggesting its broad application in understanding proline cis-trans isomerization, protein folding, and local order in intrinsically disordered proteins.
Assuntos
Flúor , Prolina , Prolina/química , Prolina/análogos & derivados , Flúor/química , Cristalografia por Raios X/métodos , Conformação Proteica , Espectroscopia de Ressonância Magnética/métodos , Peptídeos/química , Ressonância Magnética Nuclear Biomolecular/métodos , Conformação MolecularRESUMO
Structures at serine-proline sites in proteins were analyzed using a combination of peptide synthesis with structural methods and bioinformatics analysis of the PDB. Dipeptides were synthesized with the proline derivative (2S,4S)-(4-iodophenyl)hydroxyproline [hyp(4-I-Ph)]. The crystal structure of Boc-Ser-hyp(4-I-Ph)-OMe had two molecules in the unit cell. One molecule exhibited cis-proline and a type VIa2 ß-turn (BcisD). The cis-proline conformation was stabilized by a C-H/O interaction between Pro C-Hα and the Ser side-chain oxygen. NMR data were consistent with stabilization of cis-proline by a C-H/O interaction in solution. The other crystallographically observed molecule had trans-Pro and both residues in the PPII conformation. Two conformations were observed in the crystal structure of Ac-Ser-hyp(4-I-Ph)-OMe, with Ser adopting PPII in one and the ß conformation in the other, each with Pro in the δ conformation and trans-Pro. Structures at Ser-Pro sequences were further examined via bioinformatics analysis of the PDB and via DFT calculations. Ser-Pro versus Ala-Pro sequences were compared to identify bases for Ser stabilization of local structures. C-H/O interactions between the Ser side-chain Oγ and Pro C-Hα were observed in 45% of structures with Ser-cis-Pro in the PDB, with nearly all Ser-cis-Pro structures adopting a type VI ß-turn. 53% of Ser-trans-Pro sequences exhibited main-chain COiâ¢â¢â¢HNi+3 or COiâ¢â¢â¢HNi+4 hydrogen bonds, with Ser as the i residue and Pro as the i + 1 residue. These structures were overwhelmingly either type I ß-turns or N-terminal capping motifs on α-helices or 310-helices. These results indicate that Ser-Pro sequences are particularly potent in favoring these structures. In each, Ser is in either the PPII or ß conformation, with the Ser Oγ capable of engaging in a hydrogen bond with the amide N-H of the i + 2 (type I ß-turn or 310-helix; Ser χ1 t) or i + 3 (α-helix; Ser χ1 g+) residue. Non-proline cis amide bonds can also be stabilized by C-H/O interactions.
RESUMO
We report a highly cross- and atroposelective coupling between ortho-(chloro)arylphosphine oxides and ortho-(bromo)aryl ethers. This previously unknown asymmetric nickel-catalyzed reaction offers a direct route to highly enantioenriched axially chiral biaryl monophosphine oxides that are difficult to access by other means. These products can be readily reduced to generate chiral MOP-type ligands bearing complex skeletal backbones. The utility of these chiral ligands in asymmetric catalysis is also demonstrated.
RESUMO
The preparation of tertiary nitroalkanes via the nickel-catalyzed alkylation of secondary nitroalkanes using aliphatic iodides is reported. Previously, catalytic access to this important class of nitroalkanes via alkylation has not been possible due to the inability of catalysts to overcome the steric demands of the products. However, we have now found that the use of a nickel catalyst in combination with a photoredox catalyst and light leads to much more active alkylation catalysts. These can now access tertiary nitroalkanes. The conditions are scalable as well as air and moisture tolerant. Importantly, reduction of the tertiary nitroalkane products allows rapid access to α-tertiary amines.
RESUMO
The preparation of a new class of reactive porous solids, prepared via straightforward salt metathesis reactions, is described here. Reaction of the dimethylammonium salt of a magnesium-based porous coordination cage with the chloride salt of [CrII Cl(Me4 cyclam)]+ affords a porous solid with concomitant removal of dimethylammonium chloride. The salt consists of the ions combined in the expected ratio based on their charge as confirmed by UV-vis and X-ray photoelectron spectroscopies, ion chromatography (IC), and inductively coupled plasma mass spectrometry (ICP-MS). The porous salt boasts a Brunauer-Emmett-Teller (BET) surface area of 213 m2 g-1 . Single crystal X-ray diffraction reveals the chromium(II) cations in the structure reside in the interstitial space between porous cages. Importantly, the chromium(II) centers, previously shown to react with O2 to afford reactive chromium(III)-superoxide adducts, are still accessible in the solid state as confirmed by UV-vis spectroscopy. The site-isolated reactive centers have competence toward hydrogen atom abstraction chemistry and display significantly increased stability and reactivity as compared to dissolved ions.
RESUMO
Carbodicarbene (CDC) has become an emerging ligand in many fields due to its strong σ-donating ability.
RESUMO
Multiple tris(imido)chromium(VI) complexes, including neutral and ionic compounds, have been synthesized and characterized. (tBuN)2Cr(NHtBu)Cl can be deprotonated by KN(SiMe3)2, yielding K[(tBuN)3CrCl]. This tris(imido) anion undergoes nucleophilic substitution by PPh3 and tBuNH2 to form (tBuN)3Cr(PPh3) and (tBuN)2Cr(NHtBu)2, respectively. (tBuN)2Cr(NHtBu)2 loses one amido proton to form K[(tBuN)3Cr(NHtBu)] upon reaction with KN(SiMe3)2. The imido ligands of K[(tBuN)3CrCl] and (tBuN)3Cr(PPh3) are attacked by the electrophile MeI to produce (tBuN)2Cr(NMetBu)Cl and (tBuN)2Cr(NMetBu)I, respectively. An alternate way to make tris(imido) anions is deprotonation of (tBuN)2Cr(NHtBu)Cl by an alkyl lithium reagent, e.g., Me3SiCH2Li. The resulting Li[(tBuN)3CrCl] was alkylated by a second equivalent of Me3SiCH2Li to form Li[(tBuN)3Cr(CH2SiMe3)]. Reactivity studies of tris(imido) complexes show cycloaddition with PhNCO or CO2 to form metallacycles.
RESUMO
A facile synthesis of a binuclear AgI complex 2 of a bis(carbone) ligand L and its application as a carbone-transfer agent for the generation of other transition-metal complexes of AuI (3), NiII (4), and PdII (5) is presented. Complex 2 was synthesized through multiple synthetic routes under mild reaction conditions using the tetracationic [LH4][OTf·Cl]2 precursor salt, the dicationic [LH2][OTf]2 ylide salt, and the free ligand L. The first two synthesis routes require no prior isolation of the air-, moisture-, and temperature-sensitive free ligand L, thus affording complex 2 with high yield and purity. Multinuclear NMR techniques, high-resolution mass spectrometry, and single-crystal X-ray diffraction analysis confirmed the identity of complex 2 as a binuclear AgI complex of L with a molecular formula of [L2Ag2][OTf]2 and a 16-membered-ring metallomacrocyclic structure. During the transmetalation reaction with AuI, the binuclear nature of complex 2 remains intact to give analogous complex 3 ([L2Au2][OTf]2). However, the dimeric structure was disrupted upon the carbone-transfer reaction with NiII and PdII, yielding mononuclear C-N-C pincer-type complexes 4 ([LNiCl][OTf]) and 5 ([LPdCl][OTf]), respectively. These results demonstrated the versatile use of complex 2 as a carbone-transfer agent to other transition metals regardless of the type or size of the metals or the geometry they prefer.
RESUMO
We have developed a catalytic asymmetric Nazarov cyclization that results in the formation of two contiguous all-carbon quaternary stereocenters in high yield with excellent levels of asymmetric induction. This method requires no catalyst recognition elements in the starting materials that are simple diketoesters. Geometrically pure E or Z isomers of the starting material lead to diastereomerically pure products with high enantioselectivity because the species that undergoes cyclization is a rhodium enolate that is configurationally stable.
RESUMO
Dicarbon is a reactive carbon allotrope that naturally exists only in the high-temperature medium of stellar space. We report the successful preparation of a series of bottleable phosphine-stabilized dicarbon (PDC) molecules. We explore the use of these molecules as a new complementary class of carbene-like ligands featuring strong σ-donor (>NHCs and CAAcs) but weak π-acceptor properties. Steric map analysis of PDC based on Cavallo's SambVca program reveals comparable steric volume bulk of 32.5%, similar to the conventional IMes carbene. However, our PDCs exhibit dynamic steric flexibility modulated by the nature of the metal complexes and catalytic reaction environment. We demonstrate the catalytic utility of the PDC framework by its successful implementation for Suzuki-Miyaura cross-coupling and the reductive coupling reaction of an aldehyde and alkyne. Detailed investigations of the reductive coupling reaction reveal an important secondary interaction between PDC and metal complexes, which plays a critical role in the catalytic system.
RESUMO
Proline residues within proteins lack a traditional hydrogen bond donor. However, the hydrogens of the proline ring are all sterically accessible, with polarized C-H bonds at Hα and Hδ that exhibit greater partial positive character and can be utilized as alternative sites for molecular recognition. C-H/O interactions, between proline C-H bonds and oxygen lone pairs, have been previously identified as modes of recognition within protein structures and for higher-order assembly of protein structures. In order to better understand intermolecular recognition of proline residues, a series of proline derivatives was synthesized, including 4R-hydroxyproline nitrobenzoate methyl ester, acylated on the proline nitrogen with bromoacetyl and glycolyl groups, and Boc-4S-(4-iodophenyl)hydroxyproline methyl amide. All three derivatives exhibited multiple close intermolecular C-H/O interactions in the crystallographic state, with Hâ â â O distances as close as 2.3â Å. These observed distances are well below the 2.72â Å sum of the van der Waals radii of H and O, and suggest that these interactions are particularly favorable. In order to generalize these results, we further analyzed the role of C-H/O interactions in all previously crystallized derivatives of these amino acids, and found that all 26 structures exhibited close intermolecular C-H/O interactions. Finally, we analyzed all proline residues in the Cambridge Structural Database of small-molecule crystal structures. We found that the majority of these structures exhibited intermolecular C-H/O interactions at proline C-H bonds, suggesting that C-H/O interactions are an inherent and important mode for recognition of and higher-order assembly at proline residues. Due to steric accessibility and multiple polarized C-H bonds, proline residues are uniquely positioned as sites for binding and recognition via C-H/O interactions.
Assuntos
Prolina , Proteínas , Prolina/química , Modelos Moleculares , Hidroxiprolina , Ligação de Hidrogênio , Proteínas/químicaRESUMO
We have developed robust, operationally simple syntheses of fluorenes and of dibenzo[g,p]chrysenes through oxidative cascade processes. These structures that are commonly encountered in optoelectronic materials, dyes, and pharmaceutical products are accessible from 1,4-dioxaspiro[4.5]decan-8-one. The reactions are conducted open to air with inexpensive, safe CuBr2 or CuCl2.
Assuntos
Crisenos , Fluorenos , Oxirredução , Estresse OxidativoRESUMO
Novel phenanthridinone analogues with an all-carbon quaternary stereocenter have been enantioselectively synthesized using the Birch-Heck sequence. Flat phenanthridinone structures have extensive bioactivity but consequently also suffer from poor therapeutic selectivity. The addition of a quaternary center to the phenanthridinone skeleton has the potential to generate more complex analogues with improved selectivity. Unfortunately, no general synthetic pathway to such derivatives exists. Herein we report a four-step process that transforms inexpensive benzoic acid into 22 different quaternary carbon-containing phenanthridinone analogues with a variety of substituents on all three rings: alkyl groups at the quaternary center; methyl, methoxymethyl, or para-methoxybenzyl on the amide nitrogen; and halogen and methyl substituents on the aryl ring. Good to very good enantioselectivity was demonstrated in the key intramolecular desymmetrizing Mizoroki-Heck reaction. Transformations of the Heck reaction products into molecules with potentially greater therapeutic relevance were also accomplished.
Assuntos
Betula , Carbono , Amidas , Catálise , EstereoisomerismoRESUMO
The selective 4e-/4H+ reduction of dioxygen to water is an important reaction that takes place at the cathode of fuel cells. Monomeric aromatic tetrapyrroles (such as porphyrins, phthalocyanines, and corroles) coordinated to Co(II) or Co(III) have been considered as oxygen reduction catalysts due to their low cost and relative ease of synthesis. However, these systems have been repeatedly shown to be selective for O2 reduction by the less desired 2e-/2H+ pathway to yield hydrogen peroxide. Herein, we report the initial synthesis and study of a Co(II) tetrapyrrole complex based on a nonaromatic isocorrole scaffold that is competent for 4e-/4H+ oxygen reduction reaction (ORR). This Co(II) 10,10-dimethyl isocorrole (Co[10-DMIC]) is obtained in just four simple steps and has excellent yield from a known dipyrromethane synthon. Evaluation of the steady state spectroscopic and redox properties of Co[10-DMIC] against those of Co porphyrin (cobalt 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin, [Co(TPFPP)]) and corrole (cobalt 5,10,15-tris(pentafluorophenyl)corrole triphenylphosphine, Co[TPFPC](PPh3)) homologues demonstrated that the spectroscopic and electrochemical properties of the isocorrole are distinct from those displayed by more traditional aromatic tetrapyrroles. Further, the investigation of the ORR activity of Co[10-DMIC] using a combination of electrochemical and chemical reduction studies revealed that this simple, unadorned monomeric Co(II) tetrapyrrole is â¼85% selective for the 4e-/4H+ reduction of O2 to H2O over the more kinetically facile 2e-/2H+ process that delivers H2O2. In contrast, the same ORR evaluations conducted for the Co porphyrin and corrole homologues demonstrated that these traditional aromatic systems catalyze the 2e-/2H+ conversion of O2 to H2O2 with near complete selectivity. Despite being a simple, easily prepared, monomeric tetrapyrrole platform, Co[10-DMIC] supports an ORR catalysis that has historically only been achieved using elaborate porphyrinoid-based architectures that incorporate pendant proton-transfer groups or ditopic molecular clefts or that impose cofacially oriented O2 binding sites. Accordingly, Co[10-DMIC] represents the first simple, unadorned, monomeric metalloisocorrole complex that can be easily prepared and shows a privileged performance for the 4e-/4H+ peractivation of O2 to water as compared to other simple cobalt containing tetrapyrroles.
Assuntos
Cobalto , Porfirinas , Cobalto/química , Peróxido de Hidrogênio , Oxigênio/química , Porfirinas/química , Tetrapirróis , Água/químicaRESUMO
Ligand functionalization has been thoroughly leveraged to alter the properties of paddlewheel-based coordination cages where, in the case of ligand-terminated cages, functional groups are positioned on the periphery of synthesized cages. While these groups can be used to optimize solubility, porosity, crystal packing, thermal stability toward desolvation, reactivity, or optical activity, optimization of multiple properties can be challenging given their interconnected nature. For example, installation of functional groups to increase the solubility of porous cages typically has the effect of decreasing their porosity and stability toward thermal activation. Here we show that mixed-ligand cages can potentially address these issues as the benefits of various functional groups can be combined into one mixed-ligand cage. We further show that although ligand exchange reactions can be employed to obtain mixed ligand copper(II)-based cages, direct synthesis of mixed-ligand products is necessary for molybdenum(II) paddlewheel-based cages as these substitutionally inert clusters are resistant to ligand exchange. We ultimately show that highly soluble, highly porous, and thermally stable cuboctahedral cages are isolable by this strategy.
RESUMO
Carbones are divalent carbon(0) species that contain two lone pairs of electrons. Herein, we have prepared the first known stable and isolable free bis-(carbone) pincer framework with a well-defined solid-state structure. This bis-(carbone) ligand is an effective scaffold for forming monometallic (Ni and Pd) and trinuclear heterometallic complexes with Au-Pd-Au, Au-Ni-Au, and Cu-Ni-Cu configurations. Sophisticated quantum-theoretical analyses found that the metal-metal interactions are too weak to play a significant role in upholding these multi-metallic configurations; rather, the four lone pairs of electrons within the bis-(carbone) framework are the main contributors to the stability of the complexes.
RESUMO
A large library of novel porous salts based on charged coordination cages was synthesized via straightforward salt metathesis reactions. For these, solutions of salts of oppositely charged coordination cages are mixed to precipitate MOF-like permanently porous products where metal identity, pore size, ligand functional groups, and surface area are highly tunable. For most of these materials, the constituent cages combine in the ratios expected based on their charge. Additional studies focused on the rate of salt metathesis or reaction stoichiometry as variables to tune particle size or product composition, respectively. It is expected that the design principles outlined here will be widely applicable for the synthesis of new porous salts based on a variety of charged porous molecular precursors.
RESUMO
Two series of high-spin nickel complexes, [TpPh,Me]Ni(EAr) (E = O, Se, Te; Ar = C6H5) and [TpPh,Me]Ni(SeC6H4-4-X) (X = H, Cl, Me, OMe), were prepared by metathetical reaction of the nickel(II) halide precursor with sodium salts of the corresponding chalcogen, NaEAr. X-ray crystallographic characterization and spectroscopic studies have established the geometric and electronic structures of these complexes. The observed spectroscopic and structural characteristics reveal distinct trends in accordance with the variation of the identity of the arylchalcogenolate and para substituent. Reaction of the [TpPh,Me]Ni(EAr) complexes with methyl iodide proceeded readily, producing the corresponding methylarylchalcogen and [TpPh,Me]NiI. A kinetic and computational analysis of the reaction of [TpPh,Me]Ni(SeC6H5) with MeI supports that the electrophilic alkylation reactions occur via an associative mechanism via a classical SN2 transition state.
RESUMO
Photodynamic therapy (PDT), which involves the photoinduced sensitization of singlet oxygen, is an attractive treatment for certain types of cancer. The development of new photochemotherapeutic agents remains an important area of research. Macrocyclic tetrapyrrole compounds including porphyrins, phthalocyanines, chlorins, and bacteriochlorins have been pursued as sensitizers of singlet oxygen for PDT applications but historically are difficult to prepare/purify and can also suffer from high nonspecific dark toxicity, poor solubility in biological media, and/or slow clearance from biological tissues. In response to these shortcomings, we have developed a series of novel linear tetrapyrrole architectures complexed to late transition metals as potential PDT agents. We find that these dimethylbiladiene (DMBil1) tetrapyrrole complexes can efficiently photosensitize generation of 1O2 oxygen upon irradiation with visible light. To extend the absorption profile of the DMBil1 platform, alkynyl-aryl groups have been conjugated to the periphery of the tetrapyrrole using Sonogashira methods. Derivatives of this type containing ancillary phenyl (DMBil-PE), naphthyl (DMBil-NE), and anthracenyl (DMBil-AE) groups have been prepared and characterized. In addition to structurally characterizing Pd[DMBil-NE] and Pd[DMBil-AE], we find that extension of the tetrapyrrole conjugation successfully red-shifts the absorption of the DMBil-Ar family of biladienes further into the phototherapeutic window (i.e., 600-900 nm). Photochemical sensitization studies demonstrate that our series of new palladium biladiene complexes (Pd[DMBil-Ar]) can sensitize the formation of 1O2 with quantum yields in the range ΦΔ = 0.59-0.73 upon irradiation with light of λ ≥ 650 nm. The improved absorption properties of the Pd[DMBil-Ar] complexes in the phototherapeutic window, together with their high 1O2 quantum yields, highlight the promise of these compounds as potential agents for PDT.
Assuntos
Alcinos/química , Complexos de Coordenação/química , Complexos de Coordenação/síntese química , Paládio/química , Porfirinas/química , Oxigênio Singlete/química , Técnicas de Química Sintética , Complexos de Coordenação/uso terapêutico , Fotoquimioterapia , Fármacos Fotossensibilizantes/síntese química , Fármacos Fotossensibilizantes/químicaRESUMO
Functionalization of permanently porous coordination cages has been used to tune phase, surface area, stability, and solubility in this promising class of adsorbents. For many cages, however, these properties are intricately tied together, and installation of functional groups, for example, to increase solubility often leads to a decrease in surface area. Calixarene-capped cages offer the advantage in that they are cluster-terminated cages whose solid-state packing, and thus surface area, is typically governed by the nature of the capping ligand rather than the bridging ligand. In this work we investigate the influence of ligand functionalization on two series of isoreticular Ni(II)- and Co(II)-based calixarene-capped cages. The two types of materials described are represented as octahedral and rectangular prismatic coordination cages and can be synthesized in a modular manner, allowing for the substitution of dicarboxylate bridging ligands and the introduction of functional groups in specific locations on the cage. We ultimately show that highly soluble cages can be obtained while still having access to high surface areas for many of the isolated phases.