RESUMO
Doping transition metal oxide spinels with metal ions represents a significant strategy for optimizing the electronic structure of electrocatalysts. Herein, a bimetallic Fe and Ru doping strategy to fine-tune the crystal structure of CoV2O4 spinel for highly enhanced oxygen evolution reaction (OER) is presented performance. The incorporation of Fe and Ru is observed at octahedral sites within the CoV2O4 structure, effectively modulating the electronic configuration of Co. Density functional theory calculations have confirmed that Fe acts as a novel reactive site, replacing V. Additionally, the synergistic effect of Fe, Co, and Ru effectively optimizes the Gibbs free energy of the intermediate species, reduces the reaction energy barrier, and accelerates the kinetics toward OER. As expected, the best-performing CoVFe0.5Ru0.5O4 displays a low overpotential of 240 mV (@10 mA cm-2) and a remarkably low Tafel slope of 38.9 mV dec-1, surpassing that of commercial RuO2. Moreover, it demonstrates outstanding long-term durability lasting for 72 h. This study provides valuable insights for the design of highly active polymetallic spinel electrocatalysts for energy conversion applications.
RESUMO
Boosting charge separation and transfer of photoanodes is crucial for providing high viability of photoelectrochemical hydrogen (H2 ) generation. Here, a structural engineering strategy is designed and synthesized for uniformly coating an ultrathin CoFe bimetal-organic framework (CoFe MOF) layer over a BiVO4 photoanode for boosted charge separation and transfer. The photocurrent density of the optimized BiVO4 /CoFe MOF(NA) photoanode reaches a value of 3.92 mA cm-2 at 1.23 V versus reversible hydrogen electrode (RHE), up to 6.03 times that of pristine BiVO4 , due to the greatly increased efficiency of charge transfer and separation. In addition, this photoanode records one onset potential that is considerably shifted negatively when compared to BiVO4 . Transient absorption spectroscopy reveals that the CoFe MOF(NA) prolongs charge recombination lifetime by blocking the hole-transfer pathway from the BiVO4 to its surface trap states. This work sheds light on boosting charge separation and transfer through structural engineering to enhance the photocurrent of photoanodes for solar H2 production.
RESUMO
The design on synthesizing a sturdy, low-cost, clean, and sustainable electrocatalyst, as well as achieving high performance with low overpotential and good durability toward water splitting, is fairly vital in environmental and energy-related subject. Herein, for the first time the growth of sulfur (S) defect engineered self-supporting array electrode composed of metallic Re and ReS2 nanosheets on carbon cloth (referred as Re/ReS2 /CC) via a facile hydrothermal method and the following thermal treatment with H2 /N2 flow is reported. It is expected that, for example, the as-prepared Re/ReS2 -7H/CC for the electrocatalytic hydrogen evolution reaction (HER) under acidic medium affords a quite low overpotential of 42 mV to achieve a current density of 10 mA cm-2 and a very small Tafel slope of 36 mV decade-1 , which are comparable to some of the promising HER catalysts. Furthermore, in the two-electrode system, a small cell voltage of 1.30 V is recorded under alkaline condition. Characterizations and density functional theory results expound that the introduced S defects in Re/ReS2 -7H/CC can offer abundant active sites to advantageously capture electron, enhance the electron transport capacity, and weaken the adsorption free energy of H* at the active sites, being responsible for its superior electrocatalytic performance.
RESUMO
Two-dimensional nanomaterials (2D NMs), consisting of atoms or a near-atomic thickness with infinite transverse dimensions, possess unique structures, excellent physical properties, and tunable surface chemistry. They exhibit significant potential for development in the fields of sensing, renewable energy, and catalysis. This paper presents a comprehensive overview of the latest research findings on the preparation and application of 2D NMs. First, the article introduces the common synthesis methods of 2D NMs from both "top-down" and "bottom-up" perspectives, including mechanical exfoliation, ultrasonic-assisted liquid-phase exfoliation, ion intercalation, chemical vapor deposition, and hydrothermal techniques. In terms of the applications of 2D NMs, this study focuses on their potential in gas sensing, lithium-ion batteries, photodetection, electromagnetic wave absorption, photocatalysis, and electrocatalysis. Additionally, based on existing research, the article looks forward to the future development trends and possible challenges of 2D NMs. The significance of this work lies in its systematic summary of the recent advancements in the preparation methods and applications of 2D NMs.
RESUMO
Phenolic compounds are ubiquitous in nature because of their unique physical and chemical properties and wide applications, which have received extensive research attention. Phenolic compounds represented by tannic acid (TA) play an important role at the nanoscale. TA with a polyphenol hydroxyl structure can chemically react with organic or inorganic materials, among which metal-phenolic networks (MPNs) formed by coordination with metal ions and polyphenol derivatives formed by interactions with organic matter, exhibit specific properties and functions, and play key roles in photo(electro)catalysis. In this paper, we first introduce the fundamental properties of TA, then summarize the factors influencing the properties of MPNs and structural transformation of polyphenol-derived materials. Subsequently, the functions of MPNs and polyphenol derivatives in photo(electro)catalysis reactions are summarized, encompassing improving interfacial charge carrier separation, accelerating surface reaction kinetics, and enhancing light absorption. Finally, this article provides a comprehensive overview of the challenges and outlook associated with MPNs. Additionally, it presents novel insights into their stability, mechanistic analysis, synthesis, and applications in photo(electro)catalysis.
RESUMO
Layered double hydroxides (LDHs) are promising electrocatalytic materials for the oxygen evolution reaction (OER) due to their tunable composition and low cost. Here, we construct ultrathin Al-incorporated Co LDH nanosheets on carbon cloth (CC) by a facile hydrothermal strategy. Compared to Co LDH/CC, the optimized Co2Al1 LDH/CC displays significantly improved OER performance, characterized by low overpotentials of only 171 and 200 mV to reach current densities of 10 mA cm-2 in alkaline and neutral media, respectively, as well as good stability over an extended period. The introduced Al3+ and CC support play a synergistic role in steering the morphology of Co2Al1 LDH/CC while also increasing the electrochemical active sites. X-ray absorption fine spectra (XAFS) analyses uncover the critical role of Al in regulating the coordination environment of Co atoms, with evidence affording highly active Co oxidation states. Moreover, density functional theory (DFT) calculations confirmed that the Al3+ incorporated into Co LDH/CC can efficaciously modulate the electronic density of states of the d-band center of Co atoms, optimize the Gibbs free energies of intermediates toward OER, and thus accelerate the O2 evolution rate.
RESUMO
OBJECTIVE: To observe the meridian-acupoint reactions of foot three yin meridians in primary dysmenorrhea(PD) and secondary dysmenorrhea(SD) patients, so as to summarize the rules of meridian-acupoint reaction and acupoints selection. METHODS: Thirty-five patients with PD (PD group), 34 patients with SD (SD group) and 35 healthy subjects (healthy group) were recruited. The compression method was used to examine the lower leg segment of the foot three yin meridians. Positive reactions(palpable skin changes, including cords, nodules, depressions) and tenderness of meridians and acupoints were recorded. The visual analogue scale (VAS) was used to evaluate the tenderness severity of acupoints. RESULTS: Compared with the healthy group, the probability of positive reactions and tenderness in foot three yin meridians were higher in PD and SD groups (P<0.01,P<0.05). Compared with the PD group, the probability of positive reactions in Spleen and Liver Meridians were higher in the SD group, with higher probability of tenderness in Liver Meridian(P<0.05). The probability of positive reactions and tenderness in the Spleen Meridian of PD and SD groups was significantly higher than that in the Kidney Meridian (P<0.01), while the probability of tenderness in the Spleen Meridian of the PD group was significantly higher than that in the Liver Meridian (P<0.05). Positive reactions and tenderness were concentrated at Yinlingquan (SP9), Diji (SP8) and Sanyinjiao (SP6) of Spleen Meridian and Xiguan (LR7) and Ligou (LR5) in Liver Meridian of PD and SD groups. In comparison with the PD group, the probability of positive reactions, tenderness and VAS score of SP8 and LR5 of the SD group were higher (P<0.05, P<0.01). CONCLUSION: The positive reaction occurs most frequently in the Spleen Meridian, followed by the Liver Meridian, and least frequently in the Kidney Meridian. The acupoints with positive reaction are different between PD and SD, which suggests that the Spleen Meridian acupoints should be the main acupoints when treating the two kinds of dysmenorrhea, and acupoints should also be selected according to the meridian and acupoint examination results.
Assuntos
Terapia por Acupuntura , Meridianos , Feminino , Humanos , Pontos de Acupuntura , Dismenorreia/terapia , Extremidade Inferior , Perna (Membro)RESUMO
Rational design hybrid nanostructure photocatalysts with efficient charge separation and transfer, and good solar light harvesting ability have critical significance for achieving high solar-to-chemical conversion efficiency. Here a highly active and stable composite photocatalyst is reported by integrating ultrathin ZnIn2 S4 nanosheets on surface of hollow CdS cube to form the cube-in-cube structure. Experimental results combined with density functional theory calculations confirm that the Z-scheme ZnIn2 S4 /CdS heterojunction is formed, which highly boosts the charge separation and transfer under the local-electric-field at semiconductor/semiconductor interface, and thus prolongs their lifetimes. Moreover, such a structure affords the highly enhanced light-harvesting property. The optimized ZnIn2 S4 /CdS nanohybrids exhibit superior H2 generation rate under visible-light irradiation (λ ≥ 420 nm) with excellent photochemical stability during 20 h continuous operation.
RESUMO
Increasing evidence indicates that inflammatory responses may influence brain neurochemical pathways, inducing depressive-like behaviors. Ultrasound stimulation (US) is a promising non-invasive treatment for neuropsychiatric diseases. We investigated whether US can suppress inflammation and improve depressive-like behaviors. Mice were intraperitoneally injected with lipopolysaccharide to induce depressive-like behaviors. Ultrasound wave was delivered into the prefrontal cortex (PFC) for 30 min. Depressive- and anxiety-like behaviors were evaluated through the forced swimming test (FST), tail suspension test (TST), and elevated plus maze (EPM). Biochemical analyses were performed to assess the expression of inflammatory cytokines in the PFC and serum. The results indicated that US of the PFC significantly improved depressive-like behaviors in the TST (p < 0.05) and FST (p < 0.05). Anxiety-like behaviors also improved in the EPM (p < 0.05). Furthermore, the lipopolysaccharide-mediated upregulation of IL-6, IL-1ß, and TNF-α in the PFC was significantly reduced (p < 0.05) by US. In addition, no tissue damage was observed. Overall, US of PFC can effectively improve lipopolysaccharide-induced depressive-like behaviors, possibly through the downregulation of inflammatory cytokines in the PFC. US may be a safe and promising tool for improvement of depression.
RESUMO
Hydrogen is widely considered to be a sustainable and clean energy alternative to the use of fossil fuels in the future. Its high hydrogen content, nontoxicity, and liquid state at room temperature make formic acid a promising hydrogen carrier. Designing highly efficient and low-cost heterogeneous catalysts is a major challenge for realizing the practical application of formic acid in the fuel-cell-based hydrogen economy. Herein, a simple but effective and rapid strategy is proposed, which demonstrates the synthesis of NiPd bimetallic ultrafine particles (UPs) supported on NH2 -functionalized and N-doped reduced graphene oxide (NH2 -N-rGO) at room temperature. The introduction of the NH2 N group to rGO is the key reason for the formation of the ultrafine and well-dispersed Ni0.4 Pd0.6 UPs (1.8 nm) with relatively large surface area and more active sites. Surprisingly, the as-prepared low-cost NiPd/NH2 -N-rGO dsiplays excellent hydrophilicity, 100% H2 selectivity, 100% conversion, and remarkable catalytic activity (up to 954.3 mol H2 (mol catalyst)-1 h-1 ) for FA decomposition at room temperature even with no additive, which is much higher than that of the best catalysts so far reported.
RESUMO
Conversion of carbon dioxide (CO2 ) into valuable chemicals, especially liquid fuels, through electrochemical reduction driven by sustainable energy sources, is a promising way to get rid of dependence on fossil fuels, wherein developing of highly efficient catalyst is still of paramount importance. In this study, as a proof-of-concept experiment, first a facile while very effective protocol is proposed to synthesize amorphous Cu NPs. Unexpectedly, superior electrochemical performances, including high catalytic activity and selectivity of CO2 reduction to liquid fuels are achieved, that is, a total Faradaic efficiency of liquid fuels can sum up to the maximum value of 59% at -1.4 V, with formic acid (HCOOH) and ethanol (C2 H6 O) account for 37% and 22%, respectively, as well as a desirable long-term stability even up to 12 h. More importantly, this work opens a new avenue for improved electroreduction of CO2 based on amorphous metal catalysts.