RESUMO
Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.
RESUMO
Chiral perovskites play a pivotal role in spintronics and optoelectronic systems attributed to their chiral-induced spin selectivity (CISS) effect. Specifically, they allow for spin-polarized charge transport in spin light-emitting diodes (LEDs), yielding circularly polarized electroluminescence at room temperature without external magnetic fields. However, chiral lead bromide-based perovskites have yet to achieve high-performance green emissive spin-LEDs, owing to limited CISS effects and charge transport. Herein, we employ dimensional regulation and Sn2+-doping to optimize chiral bromide-based perovskite architecture for green emissive spin-LEDs. The optimized (PEA)x(S/R-PRDA)2-xSn0.1Pb0.9Br4 chiral perovskite film exhibits an enhanced CISS effect, higher hole mobility, and better energy level alignment with the emissive layer. These improvements allow us to fabricate green emissive spin-LEDs with an external quantum efficiency (EQE) of 5.7% and an asymmetry factor |gCP-EL| of 1.1 × 10-3. This work highlights the importance of tailored perovskite architectures and doping strategies in advancing spintronics for optoelectronic applications.
RESUMO
Lead halide perovskite nanocrystals are promising for next-generation high-definition displays, especially in light of their tunable bandgaps, high color purities, and high carrier mobility. Within the past few years, the external quantum efficiency of perovskite nanocrystal-based light-emitting diodes has progressed rapidly, reaching the standard for commercial applications. However, the low operational stability of these perovskite nanocrystal-based light-emitting diodes remains a crucial issue for their industrial development. Recent experimental evidence indicates that the migration of ionic species is the primary factor giving rise to the performance degradation of perovskite nanocrystal-based light-emitting diodes, and ion migration is closely related to the defects on the surface of perovskite nanocrystals and at the grain boundaries of their thin films. In this review, we focus on the central idea of surface reconstruction of perovskite nanocrystals, discuss the influence of surface defects on halide ion migration, and summarize recent advances in resurfacing perovskite nanocrystal strategies toward mitigating halide ion migration to improve the stability of the as-fabricated light-emitting diode devices. From the perspective of perovskite nanocrystal resurfacing, we set out a promising research direction for improving both the spectral and operational stability of perovskite nanocrystal-based light-emitting diodes.
RESUMO
Freeze-casting has been wildly exploited to construct porous ceramics but usually requires costly and demanding freeze-drying (high vacuum, size limit, and supercooled chamber), which can be avoided by the ambient pressure drying (APD) technique. However, applying APD to freeze-cast ceramic based on an aqueous suspension is still challenging due to inert surface chemistry. Herein, a modified APD strategy is developed to improve the drying process of freeze-cast ceramics by exploiting the simultaneous ice etching, ionic cross-linking, and solvent exchange under mild conditions (-10-0 °C, ambient pressure). This versatile strategy is applicable to various ceramic species, metal ions, and freezing techniques. The incorporated metal ions not only enhance liquid-phase sintering, producing ceramics with higher density and mechanical properties than freeze-cast counterparts, but also render customizable coloration and antibacterial property. The cost-/time-efficient APD is promising for mass production and even successive production of large-size freeze-cast ceramics that exceed the size of commercial freeze-dryers.
RESUMO
Lead halide perovskite nanocrystals (LHP NCs) are regarded as promising emitters for next-generation ultrahigh-definition displays due to their high color purity and wide color gamut. Recently, the external quantum efficiency (EQE) of LHP NC based light-emitting diodes (PNC LEDs) has been rapidly improved to a level required by practical applications. However, the poor operational stability of the device, caused by halide ion migration at the grain boundary of LHP NC thin films, remains a great challenge. Herein, we report a resurfacing strategy via pseudohalogen ions to mitigate detrimental halide ion migration, aiming to stabilize PNC LEDs. We employ a thiocyanate solution processed post-treatment method to efficiently resurface CsPbBr3 NCs and demonstrate that the thiocyanate ions can effectively inhibit bromide ion migration in LHP NC thin films. Owing to thiocyanate resurfacing, we fabricated LEDs with a high EQE of 17.3%, a maximum brightness of 48000 cd m-2, and an excellent operation half-life time.
RESUMO
Halide superionic conductors (SICs) are drawing significant research attention for their potential applications in all-solid-state batteries. A key challenge in developing such SICs is to explore and design halide structural frameworks that enable rapid ion movement. In this work, we show that the close-packed anion frameworks shared by traditional halide ionic conductors face intrinsic limitations in fast ion conduction, regardless of structural regulation. Beyond the close-packed anion frameworks, we identify that the non-close-packed anion frameworks have great potential to achieve superionic conductivity. Notably, we unravel that the non-close-packed UCl3-type framework exhibit superionic conductivity for a diverse range of carrier ions, including Li+, Na+, K+, and Ag+, which are validated through both ab initio molecular dynamics simulations and experimental measurements. We elucidate that the remarkable ionic conductivity observed in the UCl3-type framework structure stems from its significantly more distorted site and larger diffusion channel than its close-packed counterparts. By employing the non-close-packed anion framework as the key feature for high-throughput computational screening, we also identify LiGaCl3 as a promising candidate for halide SICs. These discoveries provide crucial insights for the exploration and design of novel halide SICs.
RESUMO
Solid electrolytes (SEs) are central components that enable high-performance, all-solid-state lithium batteries (ASSLBs). Amorphous SEs hold great potential for ASSLBs because their grain-boundary-free characteristics facilitate intact solid-solid contact and uniform Li-ion conduction for high-performance cathodes. However, amorphous oxide SEs with limited ionic conductivities and glassy sulfide SEs with narrow electrochemical windows cannot sustain high-nickel cathodes. Herein, we report a class of amorphous Li-Ta-Cl-based chloride SEs possessing high Li-ion conductivity (up to 7.16 mS cm-1) and low Young's modulus (approximately 3 GPa) to enable excellent Li-ion conduction and intact physical contact among rigid components in ASSLBs. We reveal that the amorphous Li-Ta-Cl matrix is composed of LiCl43-, LiCl54-, LiCl65- polyhedra, and TaCl6- octahedra via machine-learning simulation, solid-state 7Li nuclear magnetic resonance, and X-ray absorption analysis. Attractively, our amorphous chloride SEs exhibit excellent compatibility with high-nickel cathodes. We demonstrate that ASSLBs comprising amorphous chloride SEs and high-nickel single-crystal cathodes (LiNi0.88Co0.07Mn0.05O2) exhibit â¼99% capacity retention after 800 cycles at â¼3 C under 1 mA h cm-2 and â¼80% capacity retention after 75 cycles at 0.2 C under a high areal capacity of 5 mA h cm-2. Most importantly, a stable operation of up to 9800 cycles with a capacity retention of â¼77% at a high rate of 3.4 C can be achieved in a freezing environment of -10 °C. Our amorphous chloride SEs will pave the way to realize high-performance high-nickel cathodes for high-energy-density ASSLBs.
RESUMO
Solid electrolytes (SEs) with superionic conductivity and interfacial stability are highly desirable for stable all-solid-state Li-metal batteries (ASSLMBs). Here, we employ neural network potential to simulate materials composed of Li, Zr/Hf, and Cl using stochastic surface walking method and identify two potential unique layered halide SEs, named Li2ZrCl6 and Li2HfCl6, for stable ASSLMBs. The predicted halide SEs possess high Li+ conductivity and outstanding compatibility with Li metal anodes. We synthesize these SEs and demonstrate their superior stability against Li metal anodes with a record performance of 4000 h of steady lithium plating/stripping. We further fabricate the prototype stable ASSLMBs using these halide SEs without any interfacial modifications, showing small internal cathode/SE resistance (19.48 Ω cm2), high average Coulombic efficiency (â¼99.48%), good rate capability (63 mAh g-1 at 1.5 C), and unprecedented cycling stability (87% capacity retention for 70 cycles at 0.5 C).
RESUMO
In this study, we successfully prepared core-shell heterostructured nanocomposites (Fe NWs@SiO2), with ferromagnetic nanowires (Fe NWs) as the core and silica (SiO2) as the shell. The composites exhibited enhanced electromagnetic wave absorption and oxidation resistance and were synthesized using a simple liquid-phase hydrolysis reaction. We tested and analyzed the microwave absorption properties of Fe NWs@SiO2 composites with varied filling rates (mass fractions of 10 wt%, 30 wt%, and 50 wt% after mixing with paraffin). The results showed that the sample filled with 50 wt% had the best comprehensive performance. At the matching thickness of 7.25 mm, the minimum reflection loss (RLmin) could reach -54.88 dB at 13.52 GHz and the effective absorption bandwidth (EAB, RL < -10 dB) could reach 2.88 GHz in the range of 8.96-17.12 GHz. Enhanced microwave absorption performance of the core-shell structured Fe NWs@SiO2 composites could be attributed to the magnetic loss of the composite, the core-shell heterogeneous interface polarization effect, and the small-scale effect induced by the one-dimensional structure. Theoretically, this research provided Fe NWs@SiO2 composites with highly absorbent and antioxidant core-shell structures for future practical applications.
Assuntos
Nanofios , Dióxido de Silício , Absorção de Radiação , Ferro , Micro-OndasRESUMO
High-voltage spinel cobalt-free LiNi0.5 Mn1.5 O4 (LNMO) is one of the most promising cathode candidates for next-generation lithium-ion batteries (LIBs) due to its high specific capacity, high operating voltage, and low cost. However, inferior electronic conductivity, transition metal dissolution, and fast capacity degradation of LNMO, especially in high mass loading for high areal capacity, are the critical material challenges for its practical application. Herein, trace multiple Cr-Fe-Cu elements doping of LiNi0.45 Cr0.0167 Fe0.0167 Cu0.0167 Mn1.5 O4 (CFC0.5-LNMO) cathode is achieved by a blow-spinning strategy to exhibit very stable cycling at a practical level of areal capacity up to 3 mAh cm-2 . It is demonstrated that the Cu, Fe, and Cr doping into the LNMO lattice can suspend the Mn dissolution and improve the Li ion diffusivity and electronic conductivity of the LNMO host. As a result, the obtained CFC0.5-LNMO cathode exhibits an excellent rate performance (1.75 mAh cm-2 at 1C) and long cycling stability under an areal capacity of 3 mAh cm-2 (78% capacity retention over 300 cycles at 0.5C).
RESUMO
This paper improves the accuracy of a mine robot's positioning and mapping for rapid rescue. Specifically, we improved the FastSLAM algorithm inspired by the lion swarm optimization method. Through the division of labor between different individuals in the lion swarm optimization algorithm, the optimized particle set distribution after importance sampling in the FastSLAM algorithm is realized. The particles are distributed in a high likelihood area, thereby solving the problem of particle weight degradation. Meanwhile, the diversity of particles is increased since the foraging methods between individuals in the lion swarm algorithm are different so that improving the accuracy of the robot's positioning and mapping. The experimental results confirmed the improvement of the algorithm and the accuracy of the robot.
Assuntos
Robótica , Algoritmos , HumanosRESUMO
α-Glucosidase is the key enzyme on carbohydrate metabolism, and its bioactive inhibitors are supposed to be an effective therapeutic for type 2 diabetes mellitus. During our continuing study for discovering α-glucosidase inhibitors, a fungus GDZZ-G2 which is derived from a medicinal plant Callicarpa kwangtungensis Chun, exhibited significant inhibition on α-glucosidase. The strain was identified as Fusarium incarnatum by morphological and molecular methods. Further bioassay-guided fractionation result in six known secondary metabolites (1-6). All the compounds except 4 were isolated from F. incarnatum for the first time. Among them, an anthraquinonoid (S)-1,3,6-trihydroxy-7-(1-hydroxyethyl)anthracene-9,10-dione (compound 1) exhibited strong inhibitory effect against α-glucosidase (IC50 = 77.67 ± 0.67 µΜ), compared with acarbose (IC50 = 711.8 ± 5 µΜ). An enzyme kinetics analysis revealed that compound 1 was an uncompetitive inhibitor. Besides, docking simulations predicted that compound 1 inhibited α-glucosidase substrate complex by binding Gln322, Gly306, Thr307, and Ser329 through hydrogen-bond interactions. Our findings suggested that compound 1 can be considered a lead compound for further modifications and the development of a new effective drug candidate in the treatment of type 2 diabetes mellitus.
Assuntos
Diabetes Mellitus Tipo 2 , Fusarium , alfa-Glucosidases , Diabetes Mellitus Tipo 2/tratamento farmacológico , Inibidores de Glicosídeo Hidrolases/farmacologia , Inibidores de Glicosídeo Hidrolases/química , Fusarium/metabolismo , Simulação de Acoplamento Molecular , CinéticaRESUMO
As one fundamental property of light, polarization has a huge impact in quantum optics and optoelectronics through light-matter interactions. However, the bright and near-unity polarized light emissions in the visible range by solid crystalline materials are scantly realized. Here, we report well-defined quasi two-dimensional (2D) hybrid crystals based on the linear alignment of Cu2I2-dimer/bidentate ligand hybrid clusters for achieving bright and near-unity linearly polarized light emissions. Using first-principle calculations, we demonstrate that the superaligned transition dipole moments are the key for the observed excellent polarized light emissions. To further enhance the photoluminescence (PL) polarization degree, we fabricate Cu2I2-dimer-based hybrid nanobelts, which display high PL quantum yield (up to 64%) and ultrahigh PL polarization degree (â¼0.99). Our reported copper iodine cluster-based luminescent hybrid materials for bright and highly polarized light emissions will have great potential for future quantum optics applications.
RESUMO
Thermochromic phosphors are intriguing materials for realizing thermochromic behaviors of light-emitting diodes. Here a highly luminescent and stable thermochromic phosphor based on one-dimensional Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 is reported. This unique ionic copper-iodine chain-based hybrid exhibits near-unity photoluminescence efficiency owing to the through-space charge-transfer character of relevant electronic transitions. More importantly, an alternative mechanism of thermochromic phosphorescence was unraveled, supported by a first principles simulation of concerted copper atom migration in the copper-iodine chain. Furthermore, we successfully fabricate a bright thermochromic light-emitting diode using this Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 thermochromic phosphor. Our reported flexible ionic copper-iodine chain-based thermochromic luminescent material represents a new type of cost-effective functional phosphor.
RESUMO
Aqueous proton batteries are regarded as one of the most promising energy technologies for next-generation grid storage due to the distinctive merits of H+ charge carriers with small ionic radius and light weight. Various materials have been explored for aqueous proton batteries; however, their full batteries show undesirable electrochemical performance with limited rate capability and cycling stability. Here we introduce a novel aqueous proton full battery that shows remarkable rate capability, cycling stability, and ultralow temperature performance, which is driven by a hydrogen gas anode and a Prussian blue analogue cathode in a concentrated phosphoric acid electrolyte. Its operation involves hydrogen evolution/oxidation redox reactions on the anode and H+ insertion/extraction reactions on the cathode, in parallel with the ideal transfer of only H+ between these two electrodes. The fabricated aqueous hydrogen gas-proton battery exhibits an unprecedented charge/discharge capability of up to 960 C with a superior power density of 36.5 kW kg-1, along with an ultralong cycle life of over 0.35 million cycles. Furthermore, this hydrogen gas-proton battery is able to work well at an ultralow temperature of -80 °C with 54% of its room-temperature capacity and under -60 °C with a stable cycle life of 1150 cycles. This work provides new opportunities to construct aqueous proton batteries with high performance in extreme conditions for large-scale energy storage.
RESUMO
Lead halide perovskite nanocrystals (PNCs) are emerging as promising light emitters to be actively explored for high color purity and efficient light-emitting diodes. However, the most reported lead halide perovskite nanocrystal light-emitting diodes (PNCLEDs) encountered issues of emission line width broadening and operation voltage elevating caused by the quantum confinement effect. Here, we report a new type of PNCLED using large-size CsPbBr3 PNCs overly exceeding the Bohr exciton diameter, achieving ultranarrow emission line width and rapid brightness rise around the turn-on voltage. We adopt calcium-tributylphosphine oxide hybrid ligand passivation to produce highly dispersed large-size colloidal CsPbBr3 PNCs with a weak size confinement effect and also high photoluminescence quantum yield (â¼85%). Utilizing these large-size PNCs as emitters, we manifest that the detrimental effects caused by the quantum confinement effect can be avoided in the device, thereby realizing the highest color purity in green PNCLED, with a narrow full width at half-maximum of 16.4 nm and a high corrected maximum external quantum efficiency of 17.85%. Moreover, the operation half-life time of the large-size PNCLED is 5-fold of that based on smaller-size PNCs. Our work provides a new avenue for improving the performance of PNCLEDs based on unconventional large-size effects.
RESUMO
Owing to the hypoxia status of the tumor, the reactive oxygen species (ROS) production during photodynamic therapy (PDT) of the tumor is less efficient. Herein, a facile method which involves the synthesis of Mg-Mn-Al layered double hydroxides (LDH) clay with MoS2 doping in the surface and anionic layer space of LDH was presented, to integrate the photo-thermal effect of MoS2 and imaging and catalytic functions of Mg-Mn-Al LDH. The designed LDH-MoS2 (LMM) clay composite was further surface-coated with bovine serum albumin (BSA) to maintain the colloidal stability of LMM in physiological environment. A photosensitizer, chlorin e6 (Ce6), was absorbed at the surface and anionic layer space of LMM@BSA. In the LMM formulation, the magnetic resonance imaging of Mg-Mn-Al LDH was enhanced thanks to the reduced and acid microenvironment of the tumor. Notably, the ROS production and PDT efficiency of Ce6 were significantly improved, because LMM@BSA could catalyze the decomposing of the overexpressed H2O2 in tumors to produce oxygen. The biocompatible LMM@BSA that played the synergism with tumor microenvironment is a promising candidate for the effective treatment of cancer.
Assuntos
Catalase/uso terapêutico , Dissulfetos/uso terapêutico , Molibdênio/uso terapêutico , Nanoestruturas/uso terapêutico , Neoplasias/terapia , Fármacos Fotossensibilizantes/uso terapêutico , Porfirinas/uso terapêutico , Animais , Materiais Biomiméticos/síntese química , Materiais Biomiméticos/uso terapêutico , Clorofilídeos , Células HT29 , Humanos , Hidróxidos/uso terapêutico , Imageamento por Ressonância Magnética/métodos , Camundongos , Neoplasias/diagnóstico por imagem , Neoplasias/metabolismo , Fotoquimioterapia/métodos , Terapia Fototérmica/métodos , Espécies Reativas de Oxigênio/metabolismo , Nanomedicina Teranóstica/métodosRESUMO
Lithium cobalt oxide (LiCoO2) possesses an attractive theoretical specific capacity (274 mAh g-1) and high discharge voltage (â¼4.2 V vs Li+/Li). However, only a half of the theoretical capacity of LiCoO2 is available in commercialized lithium ion batteries because of the intrinsic structural instability and detrimental interface of LiCoO2 at the charging voltage over 4.2 V. Here, a facile blow-spinning synthetic method is developed to realize precise doping and simultaneous self-assembly coating of LiCoO2 particles, achieving a record performance among present LiCoO2 cathodes. Owing to the spatial confinement effect of microfibers fabricated by blow-spinning, homogeneously Mn and La doped in the LiCoO2 host and uniformly Li-Ti-O segregated at the LiCoO2 surface can be realized in every batch of samples. It is demonstrated that the Mn and La codoping can suspend the intrinsic instability and increase the Li+ diffusivity of the LiCoO2 host, and the Ti-based coating can stabilize the interface of LiCoO2 particles at the charging voltage up to 4.5 V. As a result, the obtained comodified LiCoO2 cathode shows the best rate performance (1.85 mAh cm-2 at 2C) and longest cycling stability under an areal capacity of 2.04 mAh cm-2 (83% capacity retention over 300 cycles at 0.3C), in comparison to previously reported LiCoO2 cathodes.
RESUMO
Highly luminescent inks are desirable for various applications such as decorative coating, art painting, and anticounterfeiting, to name a few. However, present inks display low photoluminescent efficiency requiring a strong excitation light to make them glow. Here, we report a highly luminescent ink based on the copper-iodide/1-Propyl-1,4-diazabicyclo[2.2.2]octan-1-ium (Cu4I6(pr-ted)2) hybrid cluster with a quantum efficiency exceeding 98%. Under the interaction between the Cu4I6(pr-ted)2 hybrid cluster and polyvinylpyrrolidone (PVP), the highly luminescent Cu4I6(pr-ted)2/PVP ink can be facilely prepared via the one-pot solution synthesis. The obtained ink exhibits strong green light emission that originates from the efficient phosphorescence of Cu4I6(pr-ted)2 nanocrystals. Attractively, the ink displays high conversion efficiency for the ultraviolet light to bright green light emission due to its wide Stokes shift, implying great potential for anticounterfeiting and luminescent solar concentrator coating.
RESUMO
Lead halide perovskite nanocrystals (NCs) exhibit great application potential in optoelectronic devices because of their tunable band gaps and facile colloidal synthesis, but they suffer from serious lead toxicity and instability. It is highly desirable to substitute lead with other elements to acquire nontoxic and environmentally friendly lead-free perovskite NCs for optoelectronic devices. Here, we report a general method for the colloidal synthesis of a series of bismuth/antimony-based halide perovskite NCs with various constituents and optical band gaps from 1.97 to 3.15 eV. In our proposed synthetic system, 1-dodecanol is adopted as the solvent instead of the conventionally used 1-octadecene to realize size controllability of bismuth/antimony-based metal halide perovskite NCs. It is found that 1-dodecanol can act as a surfactant to tightly adsorb on the surface of bismuth/antimony-based halide perovskite NCs, enabling their small sizes (â¼2 nm) and high dispersibility. Simultaneously, the band gaps of bismuth/antimony-based halide (A3B2X9, where A = CH3NH3, Cs, or Rb, B = Bi or Sb, and X = Cl, Br, or I) perovskite NCs can be systematically tuned by the atomic substitution of A, B, or X lattice sites. Moreover, to show the optoelectronic application potential of these lead-free halide perovskite NCs, a solar cell based on colloidal Cs3Bi2I9 perovskite NCs is demonstrated. The developed colloidal synthesis of bismuth/antimony-based halide NCs in 1-dodecanol will offer an alternative route to fabricating lead-free halide perovskite optoelectronic devices.