Electro-optical logic using dual-nanobeam Mach-Zehnder interferometer switches.

The maturity of integrated photonics enables many applications including high-performance computing. Digital photonic computing always considers resonator-based modulators as the key active components due to their compactness as compared to broad-spectrum Mach-Zehnder interferometers (MZIs). In this paper, we investigate the dual-nanobeam (NB) based MZI 2 × 2 switches with much smaller footprint for realizing electro-optical logic circuits. New logic gates and scalable circuits assisted by multiplexing techniques are proposed. Results show that the NB MZI is another promising candidate for electronic-photonic digital computing.

Automated logic synthesis for electro-optic logic-based integrated optical computing.

Integrated optical computing attracts increasing interest recently as Moore's law approaches the physical limitation. Among all the approaches of integrated optical computing, directed logic that takes the full advantage of integrated photonics and electronics has received lots of investigation since its first introduction in 2007. Meanwhile, as integrated photonics matures, it has become critical to develop automated methods for synthesizing optical devices for large-scale optical designs. In this paper, we propose a general electro-optic (EO) logic in a higher level to explore its potential in integrated computing. Compared to the directed logic, the EO logic leads to a briefer design with shorter optical paths and fewer components. Then a comprehensive gate library based on EO logic is summarized. At last, an And-Inverter Graphs (AIGs) based automated logic synthesis algorithm is described as an example to implement the EO logic, which offers an instruction for the design automation of high-speed integrated optical computing circuits.

Silicon microdisk-based full adders for optical computing.

Due to the projected saturation of Moore's law, as well as the drastically increasing trend of bandwidth with lower power consumption, silicon photonics has emerged as one of the most promising alternatives that has attracted a lasting interest due to the accessibility and maturity of ultra-compact passive and active integrated photonic components. In this Letter, we demonstrate a ripple-carry electro-optic 2-bit full adder using microdisks, which replaces the core part of an electrical full adder by optical counterparts and uses light to carry signals from one bit to the next with high bandwidth and low power consumption per bit. All control signals of the operands are applied simultaneously within each clock cycle. Thus, the severe latency issue that accumulates as the size of the full adder increases can be circumvented, allowing for an improvement in computing speed and a reduction in power consumption. This approach paves the way for future high-speed optical computing systems in the post-Moore's law era.

Plasmonic non-concentric nanorings array as an unidirectional nano-optical conveyor belt actuated by polarization rotation.

We report a nano-optical conveyor belt containing an array of gold plasmonic non-concentric nanorings (PNNRs) for the realization of trapping and unidirectional transportation of nanoparticles through rotating the polarization of an excitation beam. The location of hot spots within an asymmetric plasmonic nanostructure is polarization dependent, thus making it possible to manipulate a trapped target by rotating the incident polarization state. In the case of PNNR, the two poles have highly unbalanced trap potential. This greatly enhances the chance of transferring trapped particles between adjacent PNNRs in a given direction through rotating the polarization. As confirmed by three-dimensional finite-difference time-domain analysis, an array of PNNRs forms an unidirectional nano-optical conveyor belt, which delivers target nanoparticles or biomolecules over a long distance with nanometer accuracy. With the capacity to trap and to transfer, our design offers a versatile scheme for conducting mechanical sample manipulation in many on-chip optofluidic applications.

Nano-optical conveyor belt with waveguide-coupled excitation.

We propose a plasmonic nano-optical conveyor belt for peristaltic transport of nano-particles. Instead of illumination from the top, waveguide-coupled excitation is used for trapping particles with a higher degree of precision and flexibility. Graded nano-rods with individual dimensions coded to have resonance at specific wavelengths are incorporated along the waveguide in order to produce spatially addressable hot spots. Consequently, by switching the excitation wavelength sequentially, particles can be transported to adjacent optical traps along the waveguide. The feasibility of this design is analyzed using three-dimensional finite-difference time-domain and Maxwell stress tensor methods. Simulation results show that this system is capable of exciting addressable traps and moving particles in a peristaltic fashion with tens of nanometers resolution. It is the first, to the best of our knowledge, report about a nano-optical conveyor belt with waveguide-coupled excitation, which is very important for scalability and on-chip integration. The proposed approach offers a new design direction for integrated waveguide-based optical manipulation devices and its application in large scale lab-on-a-chip integration.

Switching of nanoparticles in large-scale hybrid electro-optofluidics integration.

We numerically demonstrate the scheme of independent optofluidic switching of nanoparticles on a silicon-based lab-on-a-chip system, using an electronic logic activated ring-assisted Mach-Zehnder interferometer (RAMZI). By using the carrier injection method with a tiny refractive index change of 8.00×10-4 to adjust the phase delay of a ring resonator sitting on one arm of the MZI, the light passing through could be switched to any output port of MZI followed by a directional coupler (DC). Meanwhile, the trapping force and scattering force of the guided lightwave could provide the actuation for sample delivery. Therefore, the switching logic of the guided mode is mapping to its loaded sample of nanomaterials. Our structure possesses high compactness, scalability, and time-effectiveness and, thereby, it is very appropriate for on-chip optical manipulation. The introduction of the RAMZI and cascaded RAMZIs in an optofluidic chip can form a scalable switching module with an independent electronic logic trigger signal, and make the chip dynamically configurable and scalable, which is very critical and opens a new horizon for the large-scale hybrid electro-optofluidics integration of a lab-on-a-chip system.

Ultracompact and broadband polarization beam splitter based on polarization-dependent critical guiding condition.

An ultracompact and broadband polarization beam splitter (PBS) based on the polarization-dependent critical guiding condition of an asymmetrical directional coupler is proposed. The device consists of a pair of silicon waveguides with different height and width. Due to the different cutoff conditions for the TE and TM polarization modes, it is possible to have the TM mode guided in one waveguide while the TE mode is supported in both. Therefore, only the phase-matching condition for the cross-coupling of the TE mode needs to be considered. This approach not only simplifies the design procedures but also significantly improves device performance with smaller total length and larger bandwidth. Finally, regardless of the contribution of S-bend waveguides, our proposed PBS has a coupling region as short as 0.2 µm, which is the shortest reported until now. The simulation result shows that the extinction ratios for the TE and TM polarization are 13.5 and 16.6 dB at their respective output ports, and their insertion losses are 0.29 and 0.13 dB, respectively. Numerical simulations also show that the device offers a very large bandwidth (∼140 nm) with large extinction ratio (>10 dB) and low insertion loss (<1 dB).

Electronic-photonic arithmetic logic unit for high-speed computing.

The past two decades have witnessed the stagnation of the clock speed of microprocessors followed by the recent faltering of Moore's law as nanofabrication technology approaches its unavoidable physical limit. Vigorous efforts from various research areas have been made to develop power-efficient and ultrafast computing machines in this post-Moore's law era. With its unique capacity to integrate complex electro-optic circuits on a single chip, integrated photonics has revolutionized the interconnects and has shown its striking potential in optical computing. Here, we propose an electronic-photonic computing architecture for a wavelength division multiplexing-based electronic-photonic arithmetic logic unit, which disentangles the exponential relationship between power and clock rate, leading to an enhancement in computation speed and power efficiency as compared to the state-of-the-art transistors-based circuits. We experimentally demonstrate its practicality by implementing a 4-bit arithmetic logic unit consisting of 8 high-speed microdisk modulators and operating at 20 GHz. This approach paves the way to future power-saving and high-speed electronic-photonic computing circuits.