RESUMO
ConspectusElectrochemistry has a central role in addressing the societal issues of our time, including the United Nations' Sustainable Development Goals (SDGs) and beyond. At a more basic level, however, elucidating the nature of electrode-electrolyte interfaces is an ongoing challenge due to many reasons, but one obvious reason is the fact that the electrode-electrolyte interface is buried by a thick liquid electrolyte layer. This fact would seem to preclude, by default, the use of many traditional characterization techniques in ultrahigh vacuum surface science due to their incompatibility with liquids. However, combined UHV-EC (ultrahigh vacuum-electrochemistry) approaches are an active area of research and provide a means of bridging the liquid environment of electrochemistry to UHV-based techniques. In short, UHV-EC approaches are able to remove the bulk electrolyte layer by performing electrochemistry in the liquid environment of electrochemistry followed by sample removal (referred to as emersion), evacuation, and then transfer into vacuum for analysis.Through this Account, we highlight our group's activities using UHV-EC to bridge electrochemistry with UHV-based X-ray and ultraviolet photoelectron spectroscopy (XPS/UPS) and scanning tunneling microscopy (STM). We provide a background and overview of the UHV-EC setup, and through illustrative examples, we convey what sorts of insights and information can be obtained. One notable advance is the use of ferrocene-terminated self-assembled monolayers as a spectroscopic molecular probe, allowing the electrochemical response to be correlated with the potential-dependent electronic and chemical state of the electrode-monolayer-electrolyte interfacial region. With XPS/UPS, we have been able to probe changes in the oxidation state, valence structure, and also the so-called potential drop across the interfacial region. In related work, we have also spectroscopically probed changes in the surface composition and screening of the surface charge of oxygen-terminated boron-doped diamond electrodes emersed from high-pH solutions. Finally, we will give readers a glimpse into our recent progress regarding real-space visualizations of electrodes following electrochemistry and emersion using UHV-based STM. We begin by demonstrating the ability to visualize large-scale morphology changes, including electrochemically induced graphite exfoliation and the surface reconstruction of Au surfaces. Taking this further, we show that in certain instances atomically resolved specifically adsorbed anions on metal electrodes can be imaged. In all, we anticipate that this Account will stimulate readers to advance UHV-EC approaches further, as there is a need to improve our understanding concerning the guidelines that determine applicable electrochemical systems and how to exploit promising extensions to other UHV methods.
RESUMO
Fluorescence and Raman scattering spectroscopies have been used in various research fields such as chemistry, electrochemistry, and biochemistry because they can easily obtain detailed information about molecules at interfaces with visible light. In particular, multimodal fluorescence and Raman scattering spectroscopy have recently attracted significant attention, which enables us to distinguish chemical species and their electronic states that are important for expressing various functions. However, a special strategy is required to perform simultaneous measurements because the cross sections of fluorescence and Raman scattering differ by as much as â¼1014. In this study, we propose a method for the simultaneous measurement of dye molecules on a metal surface using a monatomic layer of iodine as the dielectric layer. The method is based on adequately quenching the photoexcited state of the molecules near the metal surface to weaken the fluorescence intensity and using the resonance effect to increase the Raman signal. We have validated this concept by experiments with insulating layers of different thicknesses and dye molecules of different chemical structures. The proposed multimodal strategy paves the way for various applications such as catalytic chemistry and electrochemistry, where the adsorption structure and electronic states of molecular species near the metal surface determine functionalities.
RESUMO
Unexpected phenomena displayed by low-boron-doped diamond (BDD) electrodes are disclosed in the present work. Generally, the presence of sp2 nondiamond carbon impurities in BDD electrodes causes undesirable electrochemical properties, such as a reduced potential window and increased background current, etc. However, we found that the potential window and redox reaction in normally doped (1%) BDD and low-doped (0.1%) BDD exhibited opposite tendencies depending on the extent of sp2 carbon. Moreover, we found that contrary to the usual expectations, low-doped BDD containing sp2 carbon hinders electron transfer, whereas in line with expectations, normally doped BDD containing sp2 exhibits enhanced electron transfer. Surface analyses by X-ray/ultraviolet photoelectron spectroscopy (XPS/UPS) and electrochemical methods are utilized to explain these unusual phenomena. This work indicates that the electrochemical properties of low-doped BDD containing sp2 might be due partially to the high level of surface oxygen, the large work function, the low carrier density, and the existence of different types of sp2 carbon.
RESUMO
Focusing on the electric double layer formed at aqueous solution/graphite electrode interfaces, we investigated the relationship between the mobility of interfacial water and its hydrogen bonding networks by using molecular dynamics simulations. We focused on the mobility of the first hydration layer constructed nearest to the electrode. The mobility was determined by calculating the diffusion coefficient which showed an opposite trend to that of the applied potential polarity. The mobility decreased upon positive potentials while showing an increase upon negative potentials, which is rationalized by the strength of the interfacial hydrogen bonding networks.
RESUMO
We report the rapid improvement in the carrier mobility of the electric double layer field-effect transistor based on the ionic liquid (IL)/pentacene single crystal interface. Generally, the surface oxidation of the pentacene single crystal is unavoidable, and the considerable degradation restricts the performance of the field-effect transistor. However, the formation of the IL/pentacene single crystal interface resolves this problem by increasing the carrier mobility by approximately twice the initial value within a few hours. Furthermore, frequency-modulation atomic force microscopy revealed that the aforementioned rapid improvement is attributed to the appearance of a clean and flat surface of the pentacene single crystal via the defect-induced spontaneous dissolution of pentacene molecules into the IL.
RESUMO
Carbon-based materials are regarded as an environmentally benign alternative to the conventional metal electrode used in electrochemistry from the viewpoint of sustainable chemistry. Among various carbon electrode materials, boron-doped diamond (BDD) exhibits superior electrochemical properties. However, it is still uncertain how surface chemical species of BDD influence the electrochemical performance, because of the difficulty in characterizing the surface species. Here, we have developed in situ spectroscopic measurement systems on BDD electrodes, i.e., in situ attenuated total reflection infrared spectroscopy (ATR-IR) and electrochemical X-ray photoelectron spectroscopy (EC-XPS). ATR-IR studies at a controlled electrode potential confirmed selective surface hydroxylation. EC-XPS studies confirmed deprotonation of C-OH groups at the BDD/electrolyte interface. These findings should be important not only for better understanding of BDD's fundamentals but also for a variety of applications.
RESUMO
We explore the redox-dependent electronic and structural changes of ferrocene-terminated self-assembled monolayers (Fc SAMs) immersed in aqueous solution. By exploiting X-ray and ultraviolet photoelectron spectroscopy combined with an electrochemical cell (EC-XPS/UPS), we can electrochemically control the Fc SAMs and spectroscopically probe the induced changes with the ferrocene/ferrocenium (Fc/Fc+) redox center (Fe oxidation state), formation of 1:1 Fc+-ClO4- ion pairs, molecular orientation, and monolayer thickness. We further find the insignificant involvement of interfacial water in the Fc SAMs irrespective of redox state. Electrolyte dependencies could be identified with 0.1 M NaClO4 and HClO4 when probing partially oxidized Fc/Fc+ SAMs. Corroborating the occurrence of electrochemically induced oxidation, EC-UPS shows that oxidation to Fc+ is accompanied by a shift of the highest occupied molecular orbital toward higher binding energy. The oxidation to Fc+ is also met with an increase in work function ascribed to the induced negative interfacial dipole caused by the presence of Fc+-ClO4- ion pairs along with a contribution from the reorientation of the Fc+ SAMs. The reversibility of our observations is confirmed upon conversion from Fc+ back to the neutral Fc. The approach shown here is beneficial for a broad range of redox-responsive systems to aid in the elucidation of structure-function relationships.
RESUMO
An understanding of the characteristics of ionic liquid/graphite interfaces is highly important for electrochemical devices such as batteries and capacitors. In this paper, we report microscopic studies of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIM-TFSI) on charged graphite electrodes using molecular dynamics simulations to reveal the two-dimensional arrangement of the ions and their dynamics at the interfaces. Analyses of surface distribution and mobility of ions revealed that the ion arrangement changes from a bilayer type to a checkerboard type with increasing applied potential. Whereas the bilayer type arrangement increases the ionic mobility parallel to the interfaces with the negative potential, the ions arranged in the checkerboard type tend to localize because of the increased lateral electrostatic interactions. Furthermore, we revealed that the inhomogeneity of ionic distribution at the positive potential propagates up to a few nanometers from the interface.
RESUMO
It has been observed that the properties of room temperature ionic liquids near solid substrates are different from those of bulk liquids, and these properties play an important role in the development of catalysts, lubricants, and electrochemical devices. In this paper, we report microscopic studies of ionic liquid/solid interfaces performed using molecular dynamics simulations. The structural and dynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIM-TFSI) on mica and graphite interfaces were thoroughly investigated to elucidate the microscopic origins of the formation of layered structures at the interfaces. Our investigation included the observation of structural and orientational changes of ions as a function of distance from the surfaces, and contour mappings of ions parallel and perpendicular to the surfaces. By virtue of such detailed analyses, we found that, during the 5 ns simulation, the closest layer of BMIM-TFSI behaves as a two-dimensional ionic crystal on mica and as a liquid or liquid crystal on graphite.
RESUMO
Electric double-layer transistors based on ionic liquid/organic semiconductor interfaces have been extensively studied during the past decade because of their high carrier densities at low operation voltages. Microscopic structures and the dynamics of ionic liquids likely determine the device performance; however, knowledge of these is limited by a lack of appropriate experimental tools. In this study, we investigated ionic liquid/organic semiconductor interfaces using molecular dynamics to reveal the microscopic properties of ionic liquids. The organic semiconductors include pentacene, rubrene, fullerene, and 7,7,8,8-tetracyanoquinodimethane (TCNQ). While ionic liquids close to the substrate always form the specific layered structures, the surface properties of organic semiconductors drastically alter the ionic dynamics. Ionic liquids at the fullerene interface behave as a two-dimensional ionic crystal because of the energy gain derived from the favorable electrostatic interaction on the corrugated periodic substrate.
RESUMO
Boron-doped diamond (BDD) has attracted much attention as a promising electrode material especially for electrochemical sensing systems, because it has excellent properties such as a wide potential window and low background current. It is known that the electrochemical properties of BDD electrodes are very sensitive to the surface termination such as to whether it is hydrogen- or oxygen-terminated. Pretreating BDD electrodes by cathodic reduction (CR) to hydrogenate the surface has been widely used to achieve high sensitivity. However, little is known about the effects of the CR treatment conditions on surface hydrogenation. In this Article, we report on a systematic study of CR treatments that can achieve effective surface hydrogenation. As a result, we found that the surface hydrogenation could be improved by applying a more negative potential in a lower pH solution. This is because hydrogen atoms generated from protons in the CR treatment contribute to the surface hydrogenation. After CR treatments, BDD surface could be hydrogenated not completely but sufficiently to achieve high sensitivity for electrochemical sensing. In addition, we confirmed that hydrogenation with high repeatability could be achieved.
RESUMO
The electrochemical properties of chemically modified electrodes have long been a significant focus of research. Although the electronic states are directly related to the electrochemical properties, there have been only limited systematic efforts to reveal the electronic structures of adsorbed redox molecules with respect to the local environment of the redox center. In this study, density functional theory (DFT) calculations were performed for ferrocene-terminated self-assembled monolayers with different electron-donating abilities, which can be regarded as the simplest class of chemically modified electrodes. We revealed that the local electrostatic potentials, which are changed by the electron donating/withdrawing functional groups at the ferrocene moiety and the dipole field of coadsorbed inert molecules, practically determine the density of states derived from the highest occupied molecular orbital (HOMO) and its vicinities (HOMO-1 and HOMO-2) with respect to the electrode Fermi level. Therefore, to design new, sophisticated electrodes with chemical modification, one should consider not only the electronic properties of the constituent molecules, but also the local electrostatic potentials formed by these molecules and coadsorbed inert molecules.
RESUMO
An ionic liquid forms a characteristic solvation structure on a substrate. For example, when the surface of the substrate is negatively or positively charged, cation and anion layers are alternately aligned on the surface. Such a solvation structure is closely related to slow diffusion, high electric capacity, and chemical reactions at the interface. To analyze the periodicity of the solvation structure, atomic force microscopy is often used. The measured force curve is generally oscillatory and its characteristic oscillation length corresponds not to the ionic diameter, but to the ion-pair diameter. However, the force curve is not the solvation structure. Hence, it is necessary to know the relationship between the force curve and the solvation structure. To find physical essence in the relationship, we have used statistical mechanics of a simple ionic liquid. We found that the basic relationship can be expressed by a simple equation and the reason why the oscillation length corresponds to the ion-pair diameter. Moreover, it is also found that Derjaguin approximation is applicable to the ionic liquid system.
RESUMO
Electrochemical frequency-modulation atomic force microscopy (EC-FM-AFM) was adopted to analyze the electrified interface between an iodine modified Au(111) and a perchloric acid solution. Atomic resolution imaging of the electrode was strongly dependent on the electrode potential within the electrochemical window: each iodine atom was imaged in the cathodic range of the electrode potential, but not in the more anodic range where the tip is retracted by approximately 0.1 nm compared to the cathodic case for the same imaging parameters. The frequency shift versus tip-to-sample distance curves obtained in the electric double layer region on the iodine adlayer indicated that the water structuring became weaker at the anodic potential, where the atomic resolution images could not be obtained, and immediately recovered at the original cathodic potential. The reversible hydration structures were consistent with the reversible topographic images and the cyclic voltammetry results. These results indicate that perchlorate anions concentrated at the anodic potential affect the interface hydration without any irreversible changes to the interface under these conditions.
Assuntos
Ouro/química , Iodo/química , Microscopia de Força Atômica , Percloratos/química , Eletroquímica , Modelos Moleculares , Conformação Molecular , Soluções , Água/químicaRESUMO
The structural properties of ionic liquid/rubrene single-crystal interfaces were investigated using frequency modulation atomic force microscopy. The spontaneous dissolution of rubrene molecules into the ionic liquid was triggered by surface defects such as rubrene oxide defects, and the dissolution rate strongly depended on the initial conditions of the rubrene surface. Dissolution of the second rubrene layer was slower due to the lower defect density, leading to the formation of a clean interface irrespective of the initial conditions. Molecular-resolution images were easily obtained at the interface, and their corrugation patterns changed with the applied force. Force curve measurements revealed that a few solvation layers of ionic liquid molecules formed at the interface, and the force needed to penetrate the solvation layers was an order of magnitude smaller than typical ionic liquid/inorganic solid interfaces. These specific properties are discussed with respect to electric double-layer transistors based on the ionic liquid/rubrene single-crystal interface.
RESUMO
Local analyses of ionic liquid/solid electrode interfaces at a controlled electrode potential are of fundamental importance to understanding the origin and properties of the electric double layer at the interfaces, which is necessary for their application to electrochemical devices. This account summarizes our recent achievements of such analyses by using the novel analytical tools of electrochemical frequency modulation AFM (EC-FM-AFM) and electrochemical photoemission spectroscopy (EC-PES). Rather stable stepped structures composed of layers of ion pairs and softer solvation layers outside of the imaged layer were clearly visualized by FM-AFM depending on the substrates. An extremely extended diffusion layer was directly observed by EC-PES during the electrodeposition of metal ion solutes.
RESUMO
Altering electrochemical interfaces by using electrolyte effects or so-called "electrolyte engineering" provides a versatile means to modulate the electrochemical response. However, the long-standing challenge is going "beyond cyclic voltammetry" where electrolyte effects are interrogated from the standpoint of the interfacial properties of the electrode/electrolyte interface. Here, we employ ferrocene-terminated self-assembled monolayers as a molecular probe and investigate how the anion-dictated electrochemical responses are translated in terms of the electronic and structural properties of the electrode/monolayer/electrolyte interface. We utilise a photoelectron-based spectroelectrochemical approach that is capable of capturing "snapshots" into (1) anion dependencies of the ferrocene/ferrocenium (Fc/Fc+) redox process including ion-pairing with counter anions (Fc+-anion) caused by differences in Fc+-anion interactions and steric constraints, and (2) interfacial energetics concerning the electrostatic potential across the electrode/monolayer/electrolyte interface. Our work can be extended to provide electrolyte-related structure-property relationships in redox-active polymers and functionalised electrodes for pseudocapacitive energy storage.
RESUMO
Electroactive tetrathiafulvalene (TTF)-containing alkanethiol self-assembled monolayers (SAMs) were designed and synthesized to elucidate the relationship between electrochemical responses and film structures. Two TTF derivative molecules having one alkanethiol chain (1) and two alkanethiol chains (2) were utilized to modulate the molecular packing arrangements in the SAMs, and the formation and structure of the SAMs were characterized by surface plasmon resonance spectroscopy (SPR). SPR measurements in various contacting media demonstrated loose packing of SAM 1 and close packing of SAM 2 due to the different space fillings of the molecules. Two successive one-electron redox waves were observed for both SAMs by cyclic voltammetry. The peak widths of the redox waves were strongly dependent on the oxidation states of the TTF moieties, the packing arrangement of the SAMs, and the contacting medium. We found that TTF-based SAMs exhibited collective electrochemical responses induced by dynamic structural changes, depending on the degree of freedom for the component molecules in the SAMs. These results imply that the molecular design, taking into account the electrochemical responses, extends the available range of molecular-based functionalities in TTF-based SAMs.
RESUMO
Electroactive tetrathiafulvalene thiol islands embedded in an n-alkanethiol SAM matrix were studied under potential control using in situ scanning tunneling microscopy. Unlike previously studied stochastic switching, the apparent height of the island could be intentionally controlled in the present system by choosing the appropriate potential and the island size. The dependence of the height change on the potential and the size is explained as structural change of the island induced by the charging effect of the electroactive moiety.
RESUMO
Potential-dependent solvation structures of aqueous electrolyte-graphite interfaces were studied using electrochemical frequency modulation atomic force microscopy. Oscillatory modulations on the force curves reversibly changed with the applied potential on the graphite electrode, and also strongly depended on the anion species in electrolyte solutions.