Template-Directed Polymerization of Binary Acrylate Monomers on Surface-Activated Lignin Nanoparticles in Toughening of Bio-Latex Films.

Fabricating bio-latex colloids with core-shell nanostructure is an effective method for obtaining films with enhanced mechanical characteristics. Nano-sized lignin is rising as a class of sustainable nanomaterials that can be incorporated into latex colloids. Fundamental knowledge of the correlation between surface chemistry of lignin nanoparticles (LNPs) and integration efficiency in latex colloids and from it thermally processed latex films are scarce. Here, an approach to integrate self-assembled nanospheres of allylated lignin as the surface-activated cores in a seeded free-radical emulsion copolymerization of butyl acrylate and methyl methacrylate is proposed. The interfacial-modulating function on allylated LNPs regulates the emulsion polymerization and it successfully produces a multi-energy dissipative latex film structure containing a lignin-dominated core (16% dry weight basis). At an optimized allyl-terminated surface functionality of 1.04 mmol g-1 , the LNPs-integrated latex film exhibits extremely high toughness value above 57.7 MJ m-3 . With multiple morphological and microstructural characterizations, the well-ordered packing of latex colloids under the nanoconfinement of LNPs in the latex films is revealed. It is concluded that the surface chemistry metrics of colloidal cores in terms of the abundance of polymerization-modulating anchors and their accessibility have a delicate control over the structural evolution of core-shell latex colloids.

Synthesis of galactoglucomannan-based latex via emulsion polymerization.

This is the first time to report a facile strategy to fabricate galactoglucomannan-based latex with highly transparent, hydrophobic and flexible characteristics by combining etherification with subsequent emulsion polymerization. The allylated galactoglucomannans (A-GGM) and galactoglucomannan-based latexes (GGM-L) were prepared and their chemical structure, substitution degree, molecular weight, conversion rate, particle size and zeta potential were characterized by ATR-FTIR, 1HNMR, quantitative 13CNMR, HP-SEC, HPLC and zeta-sizer nanometer analyzer, respectively. Furthermore, the effects of substitution degree on film surface roughness and homogeneity, water vapor permeability (WVP) and thermal stability were evaluated by AFM, SEM, WVP and TGA, respectively. The optimal GGM-L film exhibited 91.3% transmittance and 0.43% haze, 117° water contact angle, 31.2% elongation at break and 30.9 MPa ultimate tensile stress. The bio-based content of the GGM-L may reach about 99 wt%, which provides a promising avenue for polyolefin-based latex replacement for paper and paperboard applications.

Matt Polyurethane Coating: Correlation of Surface Roughness on Measurement Length and Gloss.

Matt polyurethane coating was successfully prepared through the synergistic effect of castor oil and phenolic epoxy resin into polyurethane backbone. The formation mechanism may be ascribed to the modulus mismatch between the partially modified epoxy polyurethane and partially unmodified polyurethane. Scanning electron microscopy (SEM) was used to observe the micro-rough surface morphologies. Atomic force microscopy (AFM) and three-dimensional (3D) surface profilometer were applied to calculate a series of surface roughness parameters in different dimensions, such as Sa, Sq, Sp, Sv, Sz, Sku, Ssk, etc. The exciting results of this paper-the correlation of surface roughness on measurement length and gloss-are explored in detail. It reveals the extrinsic property of measured roughness with measurement length and provides guidance for what kind of incident angle gloss meters (20°, 60°, and 85°) best describe the gloss of matt polyurethane coating.

Synthesis of an Aqueous Self-Matting Acrylic Resin with Low Gloss and High Transparency via Controlling Surface Morphology.

This paper reports on a novel, film-forming acrylic polymer resin that exhibits low-gloss surface and high transparency via controlling film morphology at sub-micron roughness levels. Such microstructure is controlled by means of the copolymerization process increasing the allyl methacrylate (AMA) crosslinker content from 0 to 0.4 wt %. This acrylic resin makes it possible to avoid high loadings of matting agents, while also having good abrasion resistance and soft-touch feeling. Gloss levels of as low as 4 units at 60° incident angle and light transmittance of up to 85% have been achieved. The chemical structure of the aqueous acrylic resin was characterized by ATR-FTIR and NMR spectroscopy. The film morphology and surface roughness were measured by SEM and AFM analysis. The emulsion particle morphology and glass transition temperature were obtained by TEM and DSC, respectively. The effects of the crosslinker content on the light transmittance, glass transition temperature, and thermal degradation stability were also discussed in detail. The characterization results conclude that an acrylic polymer with interesting optical properties and high thermal stability can be obtained, which is desirable for leather applications.

Efficient removal of pentachlorophenol from aqueous solution by 4-tert-butylcalix[8]arene modified thermally sensitive hydrogels.

We prepared poly(N-isopropylacrylamide-co-4-tert-butylcalix[8]arene) (PNIPAM-TBCX) hydrogels by copolymerization of N-isopropylacrylamide (NIPAM) with 4-tert-butylcalix[8]arene (TBCX) to capture hazardous pentachlorophenol (PCP) from aqueous solution. Adsorption experiments showed that the adsorption capacities of PNIPAM-TBCX hydrogels reached 1.96, 2.08 and 2.02 mg PCP per 1 g of hydrogel, while the molar percentage ratio of TBCX in the hydrogels was as low as 0.5%, 0.7% and 1%. The equilibrium adsorption of PCP on the hydrogels was studied using different adsorption models. In addition, the PNIPAM-TBCX hydrogel still retained its performance when regenerated several times by immersing in water at 323 K.

Dispersion of Multi-Walled Carbon Nanotubes by Polymers with Carbazole Pendants.

For various applications, it is essential to enhance the colloidal stabilization of carbon nanotube (CNT) dispersions. Here, the polymers with carbazole pendants of poly(4-(N-carbazolyl)methylstyrene-bl-poly(ethylene glycol) methyl ether methacrylate) (PCMS5-b-PAPEG73 and PCMS16-b-PAPEG43) and PCMS30, synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, were used for noncovalent functionalization of multiwalled carbon nanotubes (MWCNTs) in tetrahydrofuran (THF), offering efficient colloidal stabilization. Meanwhile, the adsorption of polymers onto MWCNTs was investigated. The results showed that the MWCNTs decorated with these three polymers in THF exhibited different colloidal stabilization and adsorption capacity. Moreover, the MWCNT dispersions could be stabilized for days and their colloidal stabilization elevated with the increase of polymer concentrations. The block copolymer PCMS16-b-PAPEG43 exhibited the optimal adsorption and dispersion capability for MWCNTs. These findings imply that PCMSm-b-PAPEGn will be a desirable dispersant for optimizing the stabilization of CNT dispersion, making carbon nanotubes (CNTs) achievable in different applications.