Postoperative early weight-bearing using double plating for periprosthetic, interprosthetic, and interimplant distal femur fractures following total knee arthroplasty: A report of three cases.

Background: Distal femur fractures (DFFs) following total knee arthroplasty (TKA) in older patients often require prolonged non-weight-bearing, thereby decreasing their activities of daily living (ADL) and increasing mortality. This report clarifies early weight-bearing safety and utility by using double-plate fixation on medial and lateral sides (LM180 double-plate fixation) for DFFs following TKA. Case presentation: Three cases of Su Type III periprosthetic, interprosthetic, and interimplant DFFs following TKA, where bone stock was limited, were treated with LM180 double-plate fixation using locking plates through medial and lateral incisions on the distal femur. In interprosthetic and interimplant DFF cases, the proximal section was secured by overlapping the lateral plate +/- medial plate with the proximal femur stem of the intramedullary nail by using monocortical screws and cerclage wires. Early postoperative partial weight-bearing was recommended, and full weight-bearing was allowed 4-5 weeks postoperation. All cases regained independent walking without hardware failure. Average ADL scores, namely, Barthel index (BI) and functional independence measure (FIM), were recovered to 85/100 and 114.7/126, respectively, approaching near-normal values. Conclusion: LM180 double-plate fixation for DFFs such as Su Type III periprosthetic, Vancouver type C interprosthetic, and interimplant DFFs following TKA with limited bone stock can be used to achieve early weight-bearing without fixation failure and help maintain ADL.

Ligament reconstruction using a semitendinosus tendon graft for proximal tibiofibular joint disorder: Case report.

We report our case of ligament reconstruction for treatment of proximal tibiofibular joint disorder using a semitendinosus tendon graft. A 21-year-old male college soccer player with no remarkable history of injury had been suffering from pain at the lateral aspect of the left knee when playing soccer. At another hospital, the patient was diagnosed with a lateral meniscus injury and cartilage injury of the external condyle of the tibia and underwent partial resection of the meniscus and bone drilling. However, his symptoms continued, and he was referred to our institution. Instability of the left proximal tibiofibular joint and pain were noted during weight-bearing dorsiflexion of the ankle. We diagnosed the case as a proximal tibiofibular joint disorder and surgically treated it by dissecting the proximal portion of the semitendinosus tendon, creating one transfibular and two transtibial tunnels, and then reconstructing the proximal tibiofibular ligament using the harvested semitendinosus tendon graft. The patient was allowed to run at postoperative 2 months, with no pain occurring while squatting at postoperative 3 months, subsequently resuming soccer at postoperative 8 months. The proximal tibiofibular joint disorder is a relatively rare pathology, and diagnosis and conservative treatment are often difficult. Although various surgical treatments are known, the clinical outcome of our case has been successful after reconstructing the anterior and posterior proximal tibiofibular ligaments using a semitendinosus tendon graft.

Comparison of three suture-bridge techniques for large or massive rotator cuff tear with delamination.

INTRODUCTION: Rotator cuff tear with delamination is considered a risk factor for postoperative retear. The purpose of this study was to compare clinical outcomes between three repair procedures for large or massive rotator cuff tears with delamination: conventional en masse suture bridge (EMSB), double-layer suture bridge (DLSB), and the combination of DLSB with modified Debyere-Patte (DLSB + DP). METHODS: 53 shoulders of 52 patients who had massive rotator cuff tears with delamination were categorized into three groups: EMSB (18 shoulders), DLSB (24 shoulders), and DLSB + DP (11 shoulders). The mean postoperative follow-up period was 34.6 months. Pre- and postoperative evaluations included a range of motion (ROM), Constant scores, global fatty degeneration (GFDI), and tendon integrity according to Sugaya's classification by magnetic resonance images (MRI). RESULTS: In all groups, ROM significantly improved after the procedures. Mean constant scores significantly improved: from 45.5 to 77.4 after EMSB, from 45.5 to 87.6 after DLSB, and from 46.3 to 88.0 after DLSB + DP. Significant differences were noted in postoperative Constant scores (p = 0.018: DLSB vs. EMSB, and p = 0.045: DLSB + DP vs. EMSB). The Constant pain scores were better for DLSB + DP than for EMSB (p = 0.012). Global fatty degeneration index (GFDI) with DLSB + DP was significantly higher than that for either EMSB or DLSB, indicating significant preoperative fatty degeneration for DLSB + DP. Retear occurred in 27.8% of the EMSB group, 12.5% of the DLSB group, and 9.1% of the DLSB + DP group. DISCUSSION: Comparisons of the three groups demonstrated that DLSB and DLSB + DP achieved better clinical outcomes than EMSB for the repair of large or massive rotator cuff tears. DLSB + DP is useful for massive rotator cuff tears with severe fatty degeneration or for cases where the presence of excessive tension is anticipated when repairing the torn cuff.

Localized pigmented villonodular synovitis in the knee associated with locking symptoms.

Pigmented villonodular synovitis (PVNS) occurs in the knee more frequently than other joints. Most cases involve diffuse PVNS while the localized type is relatively rare. This report describes a patient who had PVNS and a lateral meniscus injury which induced locking symptoms in the knee. A closed reduction of the meniscus tear was performed under local anesthesia. However, complete extension of the knee was not achieved and the locking symptoms persisted. MRI examination showed a neoplastic lesion measuring approximately 2 x 2 cm in the intercondylar space together with a lateral meniscus tear. The lesion was resected using arthroscopy. Histology of the resected lesion demonstrated localized PVNS. There has not been any recurrence of locking symptoms or PVNS two years after surgery. The findings in this case suggest that localized PVNS may contribute to locking symptoms in a patient with meniscal pathology.

Flexor tendon repair using the two-strand side-locking loop technique to tolerate aggressive active mobilization immediately after surgery.

BACKGROUND: Early mobilization after tendon repair decreases adhesion formation and improves repair-site strength. We investigated whether the two-strand side-locking loop technique would tolerate aggressive active mobilization immediately after surgery. METHODS: Twelve flexor digitorum profundus tendons of the porcine forelimbs were sutured by the two-strand side-locking loop technique with a cross-stitch epitendinous repair (Group A), and by the 8-strand repair method with a simple running suture (Group B). Gaps and residual tensile strength after cyclic loadings of 3-50 N (for 10,000 rounds) were measured. FINDINGS: Gaps after cyclic loading in Group A were 0.5+/-0.3 and 1.2+/-0.8 mm while those in Group B were 3.5+/-0.8 and 5.2+/-1.2 mm at 3 and 50 N, respectively. In addition, the respective residual tensile strength of Groups A and B were 207.1+/-15.2 and 84.2+/-18.3N. INTERPRETATION: A combination of the two-strand side-locking loop technique with cross-stitch epitendinous repair served as the optimum suture method in establishing safe and early active mobilization without the aid of a specialized rehabilitation staff.

Optimum suture material for locking technique in tendon repair: effects of suture friction in mobilization.

BACKGROUND: The 2-strand side-locking loop technique allows secure locking formation easily, yielding maximum tensile force. However, not all suture materials are suitable for this technique. METHODS: The bovine gastrocnemius tendons were transected and repaired end-to-end by the side-locking loop technique using USP2 braided polyblend, braided polyester, monofilament nylon, braided nylon, or monofilament absorbable polydioxanone sutures. A repetitive loading protocol from 10N to 100N was used, and the loading was repeated 10,000 times. In ruptured samples during the repetitive loading test, the number of loading was recorded. In samples which did not rupture, the ultimate tensile strength was measured after repetitive loading. After testing, ruptured sutures were examined microscopically. For comparison of ultimate tensile strength before and after repetitive loading, we performed a one-time loading test on samples which did not undergo the repetitive loading. FINDINGS: With monofilament nylon, braided nylon, or monofilament absorbable polydioxanone, suture rupture occurred during repetitive loading. In contrast, no suture rupture occurred with braided polyblend or braided polyester. Microscopic observation showed abrasion of the surface in braided polyester, though the friction effects were not seen with braided polyblend. The mean ultimate tensile strength before and after repetitive loading was 395N and 399N, respectively, for braided polyblend. For braided polyester, they were 208N and 174N, respectively. INTERPRETATION: Braided polyblend suture material has an excellent resistivity to friction and is suitable for the side-locking loop technique.

Novel approach to repair of acute achilles tendon rupture: early recovery without postoperative fixation or orthosis.

BACKGROUND: Immobilization or orthosis is required after conventional Achilles tendon surgery. Hypothesis This new Achilles tendon repair approach enables early rehabilitation without any postoperative immobilization or orthosis. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Twenty consecutive patients (14 men and 6 women; mean age, 43.4 years; range, 16-70 years) who had acute subcutaneous Achilles tendon rupture were treated by the new method, with an average follow-up of 2.9 years (range, 2-4.8 years). Among them, 15 injuries were sports-related and 5 were work-related. The authors applied a side-locking loop technique of their own design for the core suture, using braided polyblend suture thread, with peripheral cross-stitches added. The patients started active and passive ankle mobilization from the next day, partial weightbearing walking from 1 week, full-load walking from 4 weeks, and double-legged heel raises from 6 weeks after surgery. RESULTS: The range of motion recovery equal to the intact side averaged 3.2 weeks. Double-legged heel raises and 20 continuous single-legged heel raise exercises were possible at an average of 6.3 weeks and 9.9 weeks, respectively. T2-weighted magnetic resonance signal intensity recovered to equal that of the intact portion of the same tendon at 12 weeks. The patients resumed sports activities or heavy labor at an average of 14.4 weeks. The Achilles tendon rupture score averaged 98.3 at 24 weeks. There were no complications. CONCLUSION: This new Achilles tendon repair approach enables early mobilization exercise without costly specialized orthosis or immobilization and allows an early return to normal life and sports activities, reducing the physical and economic burden on patients.

Optimally strong tendon repair using braided polyethylene strand: 2-strand heavy-gauge locking technique vs. multiple-strand technique.

BACKGROUND: We conducted an in vitro study to investigate the strongest tensile force for tendon repair using a braided polyblend suture strand material, employing a 2-strand heavy-gauge side-locking loop technique, comparing it with other multiple-strand repair techniques. METHODS: Using the United States Pharmacopeial Convention (USP) 2 and 5-sized braided polyblend strands, 3 repair techniques were evaluated after suturing transacted bovine gastrocnemius tendons: 2-strand side-locking loop, 4-strand Savage, and 6-strand Yoshizu-1 techniques. Ultimate tensile force and mode of failure at strand rupture were examined (n=5 for each combination). FINDINGS: The ultimate tensile forces was observed with USP2-side-locking loop (mean 402 N), USP5-side-locking loop (mean 748 N), USP2-Savage (mean 552 N), and USP2-Yoshizu-1 Groups (mean 598 N). The USP5-side-locking loop Group had proportionally greater ultimate tensile force than the USP2-side-locking loop Group. However, with the number of strands doubled or tripled, resulting strengths were only 1.4 times or 1.5 times greater. The mode of failure was rupture at the locking loop portion in all side-locking loop Group samples, pull-through of the strand from the tendon in all Savage Group samples, and either pull-through of the strand from the tendon (40%) or rupture at the knot (60%) in the Yoshizu-1 Group samples. INTERPRETATION: Greater numbers of strands do not achieve proportionally greater strong tensile force in the repaired tendon. When employing the side-locking loop technique for secured locking formation, the heavier strand yields markedly greater tensile force even with only 2 strands, and thus greater holding ability.

Tension band fixation for treatment of patellar fracture: novel technique using a braided polyblend sutures and ring pins.

AIM: To evaluate a new tension band fixation technique for patellar fracture using braided polyblend sutures (PBSs) and ring pins (RPs). METHODS: A total of 13 patients (average: 58.2 years) with transverse or comminuted patellar fractures were treated by this technique. From the 4th week after the surgery, normal activities of daily living were permissible. RESULTS: Bone union was achieved at a mean 3 months from surgery, without any cases of failure, redislocation or postoperative complication. At 12 months after surgery, mean Lysholm score was 93.6, knee motion was extension 0.8 degrees to flexion of 134.6 degrees and visual analogue pain score was 0.5. CONCLUSION: The new tension band fixation technique using braided polyblend sutures resulted in good outcomes and is considered clinically effective for patellar fracture reduction.

Biomechanical differences resulting from the combination of suture materials and repair techniques.

BACKGROUND: Many suture materials and repair techniques have been applied in clinical tendon surgery. However, no recommendation is available concerning the choice of suture materials and repair techniques except in a few experimental studies. The purpose of the current study is to show the biomechanical difference resulting from the combination of suture materials and repair techniques. METHODS: The gastrocnemius tendons of 24-week-old cattle (diameter 14-16x9-11 mm) were repaired with application of a single locking, multiple locking, single grasping, or multiple grasping technique using a USP2 suture thread of either braided polyblend polyethylene, polyester, polydioxanone, or nylon. Therefore, a total of 16 combinations were made, with eight specimens for each combination. The specimen was set in an Instron tensiometer to measure the gap length after repetitive tensile loading 500 times (10-100 N). RESULTS: The single locking technique using braided polyblend polyethylene provided the smallest gap (4.5+/-0.5 mm). Other techniques using the same material resulted in a large gap (10.0-11.8 mm). The polyester provided a relatively smaller gap length, irrespective of the repair technique (7.4-8.8 mm). Polydioxanone and nylon tended to result in a large gap (9.3-12.3 mm and 8.4-10.6 mm, respectively). CONCLUSIONS: Mechanical properties of each tendon suture depended on the particular combination of suture materials and repair techniques. The combination of braided polyblend polyethylene and single locking technique provided the highest antigap strength.

Optimum locations of the locking loop and knot in tendon sutures based on the locking Kessler method.

BACKGROUND: We investigated the factors that influence tensile strength and resistance to gap formation at the repair site of tendon suture (stiffness) by comparing (1) the location of the locking loops and (2) the location of the knot. METHODS: Transected bovine tendons of the medial gastrocnemius (9-11 x 14-16 mm diameter) were sutured with a modified locking Kessler method with a USP (United States Pharmacopeial convention) 2 polyester multifilament suture (0.500-0.599 mm) and loaded to failure using an Instron 5565 tensiometer. The locking loops were located on either the upper surface facing the operator or on side portions of the tendon. The knot was positioned either close to or far from the tendon stump. RESULTS: The locations of the locking loops did not influence the tensile strength; however, the stiffness of the side loop suture (5.70 +/- 0.09 N/mm) was significantly higher than that of the upper surface loop suture (5.17 +/- 0.10 N/mm). Regarding the knot location, the tensile strength with the knot far from the tendon stump (195.1 +/- 4.8 N) was significantly higher than that with the knot close to the tendon stump (169.0 +/- 3.6 N), although the stiffness was unchanged by differences in knot location. CONCLUSIONS: These data suggested that a greater tensile strength with less of a gap is obtained by (1) forming locking loops in the side portion of the tendon, and (2) forming knots far from the tendon stump.