The Multifunctionality of Lanthanum-Strontium Cobaltite Nanopowder: High-Pressure Magnetic Studies and Excellent Electrocatalytic Properties for OER.

Simultaneous study of magnetic and electrocatalytic properties of cobaltites under extreme conditions expands the understanding of physical and chemical processes proceeding in them with the possibility of their further practical application. Therefore, La0.6Sr0.4CoO3 (LSCO) nanopowders were synthesized at different annealing temperatures tann = 850-900 °C, and their multifunctional properties were studied comprehensively. As tann increases, the rhombohedral perovskite structure of the LSCO becomes more single-phase, whereas the average particle size and dispersion grow. Co3+ and Co4+ are the major components. It has been found that LSCO-900 shows two main Curie temperatures, TC1 and TC2, associated with a particle size distribution. As pressure P increases, average ⟨TC1⟩ and ⟨TC2⟩ increase from 253 and 175 K under ambient pressure to 268 and 180 K under P = 0.8 GPa, respectively. The increment of ⟨dTC/dP⟩ for the smaller and bigger particles is sufficiently high and equals 10 and 13 K/GPa, respectively. The magnetocaloric effect in the LSCO-900 nanopowder demonstrates an extremely wide peak δTfwhm > 50 K that can be used as one of the composite components, expanding its working temperature window. Moreover, all LSCO samples showed excellent electrocatalytic performance for the oxygen evolution reaction (OER) process (overpotentials of only 265-285 mV at a current density of 10 mA cm-2) with minimal η10 for LSCO-900. Based on the experimental data, it was concluded that the formation of a dense amorphous layer on the surface of the particles ensures high stability as a catalyst (at least 24 h) during electrolysis in 1 M KOH electrolyte.

Effects of dustbathing environment on gut microbiota and expression of intestinal barrier and immune-related genes of adult laying hens housed individually in modified traditional cage.

Litters, the composition of sand and peat rich in microbiota, are essential to trigger the dustbathing behavior of chickens. To investigate the effects of a dustbathing environment (DE) on the intestinal health, gut microbiota, and immune responses of laying hens, a total of 72 healthy Hy-Line Brown laying hens at 69 wk of age (WOA) were housed individually in modified traditional cages and randomly divided into 2 groups: one group had free access to litters (CT), while the other one was restricted from litters (CC). The experiment lasted for 42 d. At the end of the experiment, the intestinal histomorphology and immune status of laying hens were determined, and the 16S rRNA sequencing method was used to assess the composition of the intestinal microbial community of birds. Intestinal histomorphology changed, including villus height and villus-to-crypt ratio significantly increased in the CT group (P < 0.01). DE reshaped the microbial community and increased the microbial richness with the higher indicators of Chao1 and observed species and the comparatively abundant beta diversity (P < 0.05). Ten genera, including Faecalibacterium and Coprococcus, declined in laying hens from the CT group (P < 0.05), while Alistipes increased in CT hens (P < 0.05) compared to those hens from the CC group. The expression levels of intestinal barrier-related genes of claudin-1, claudin-4, occludin, ZO-1, and ZO-2 and immune-related genes of IL-4, IL-6, IL-8, IFN-γ, IgA, TLR-2, and TLR-4 were significantly upregulated in the intestine of laying hens in CT group (P < 0.05). DE also increased the serum levels of IL-4, IL-6, IL-8, IFN-γ, and IgA (P < 0.01). The alteration of the gut microbiota by DE is closely related to host immune responses, including Lactobacillus positively correlated with IL-4 and IgA. Thus, a dustbathing environment can improve the welfare of laying hens by changing the intestinal histomorphology, immune response, and the gut microbial community.

Investigation of MAF for Finishing the Inner Wall of Super-Slim Cardiovascular Stents Tube.

The internal wall of cardiovascular stent tubing produced by a drawing process has defects such as pits and bumps, making the surface rough and unusable. In this research, the challenge of finishing the inner wall of a super-slim cardiovascular stent tube was solved by magnetic abrasive finishing. Firstly, a spherical CBN magnetic abrasive was prepared by a new method, plasma molten metal powders bonding with hard abrasives; then, a magnetic abrasive finishing device was developed to remove the defect layer from the inner wall of ultrafine long cardiovascular stent tubing; finally, response surface tests were performed and parameters were optimized. The results show that the prepared spherical CBN magnetic abrasive has a perfect spherical appearance; the sharp cutting edges cover the surface layer of the iron matrix; the developed magnetic abrasive finishing device for a ultrafine long cardiovascular stent tube meets the processing requirements; the process parameters are optimized by the established regression model; and the inner wall roughness (Ra) of the nickel-titanium alloy cardiovascular stents tube is reduced from 0.356 µm to 0.083 µm, with an error of 4.3% from the predicted value. Magnetic abrasive finishing effectively removed the inner wall defect layer and reduced the roughness, and this solution provides a reference for polishing the inner wall of ultrafine long tubes.

Experimental Study on the Preparation of Ultra-Fine Brass Tube Electrodes by Ultrasonic Vibration.

In order to automatically process ultra-fine copper tube electrodes, this study proposes a new method of ultrasonic vibration processing of ultra-fine copper tube, analyzes its processing principle, designs a new set of experimental processing equipment and completes the processing of 1.206 mm inner diameter, 1.276 mm outer diameter with core brass tube. Not only can the copper tube be completed with core decoring, the surface of the processed brass tube electrode also has good integrity. The effect of each machining parameter on the surface roughness of the electrode after machining was investigated by a single-factor experiment and the optimal machining effect was achieved under the conditions of machining gap 0.1 mm, ultrasonic amplitude 0.186 mm, table feed speed 6 mm/min, tube rotation speed 1000 r/min and reciprocating machining two times. The surface roughness was reduced from 1.21 µm before machining to 0.11 µm, and the residual pits, scratches and oxide layer on the surface were completely removed, which greatly improved the surface quality of the brass tube electrode and prolonged its service life.

Investigation of Spherical Al2O3 Magnetic Abrasive Prepared by Novel Method for Finishing of the Inner Surface of Cobalt-Chromium Alloy Cardiovascular Stents Tube.

In this investigation, spherical Al2O3 magnetic abrasive particles (MAPs) were used to polish the inner surface of ultra-fine long cobalt-chromium alloy cardiovascular stent tubes. The magnetic abrasives were prepared by combining plasma molten metal powder and hard abrasives, and the magnetic abrasives prepared by this new method are characterized by high sphericity, narrow particle size distribution range, long life, and good economic value. Firstly, the spherical Al2O3 magnetic abrasives were prepared by the new method; secondly, the polishing machine for the inner surface of the ultra-fine long cardiovascular stent tubes was developed; finally, the influence laws of spindle speed, magnetic pole speed, MAP filling quantities, the magnetic pole gap on the surface roughness (Ra), and the removal thickness (RT) of tubes were investigated. The results showed that the prepared Al2O3 magnetic abrasives were spherical in shape, and their superficial layer was tightly bound with Al2O3 hard abrasives with sharp cutting; the use of spherical Al2O3 magnetic abrasives could achieve the polishing of the inner surface of ultra-fine cobalt-chromium alloy cardiovascular bracket tubes, and after processing, the inner surface roughness (Ra) of the tubes decreased from 0.337 µm to 0.09 µm and had an RT of 5.106 µm.

Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser.

Due to the excellent properties of carbon fiber-reinforced polymers (CFRPs), such as high strength and strong corrosion resistance, the traditional water-jet-guided laser (WJGL) technology has problems with fiber pull-out and has a small cutting depth when processing CFRPs. Therefore, in this study, we used high-power water-jet-guided laser (HPWJGL) technology to perform groove processing experiments on CFRPs. The effects of four key process parameters, high laser power, pulse frequency, feed rate, and water-jet pressure, on the cutting depth were investigated by a single-factor experiment. The formation mechanism of groove cross-section morphology and the processing advantages of high-power water-jet-guided lasers were analyzed. On this basis, the mathematical prediction model of cutting depth was established by using the response surface method (RSM), and the optimal combination of process parameters was obtained. The mathematical prediction model was verified by experiments, and the error was only 1.84%, indicating that the model had a high reference value. This study provides a reference for the precision machining of HPWJGL technology.

Modeling and Prediction of Water-Jet-Guided Laser Cutting Depth for Inconel 718 Material Using Response Surface Methodology.

In this study, the water-jet-guided laser (WJGL) method was used to cut Inconel 718 alloy with high temperature resistance. The effect of critical parameters of the water-jet-guided laser machining method on the cutting depth was studied by a Taguchi orthogonal experiment. Furthermore, the mathematical prediction model of cutting depth was established by the response surface method (RSM). The validation experiments showed that the mathematical model had a high predictive ability for cutting depth. The optimal cutting depth was obtained by model prediction, and the error was 5.5% compared with the experimental results. Compared with the traditional dry laser cutting, the water conducting laser method reduced the thermal damage and improved the cutting quality. This study provides a reference for the precision machining of Inconel 718 with a water-jet-guided laser.

Keel bone damage affects behavioral and physiological responses related to stress and fear in two strains of laying hens.

Keel bone damage (KBD) is more prevalent in alternative laying hen housing systems than in conventional cages, and its incidence differs from strain to strain. However, the information of KBD in Lindian chickens, a native Chinese strain, is limited. To investigate the effect of KBD on fearfulness and physiological indicators of stress in Lindian chickens and commercial laying hens, a total of two hundred 25-wk-old chickens (100 Hy-line Brown and 100 Lindian chickens) were studied for 7 wk. The birds were housed in furnished cages with 10 birds per cage for each strain. At 32-wk of age, the birds in each strain were divided into normal (NK), deviated (DK), and fractured (FK) hens according to the keel bone status. Ten birds in each keel bone status per strain were subsequently selected to collect blood for the determination of stress and fear-related indicators, including corticosterone, serotonin, interleukin-1ß, and interleukin-6, and measure fear responses, including novel object test (NOT), human approach test (HAT), and tonic immobility (TI) test. The results showed that egg production was lower and the incidence of keel bone fractures was higher in Lindian chickens than in Hy-line Brown hens (P < 0.05). Lindian chickens showed a significantly increased whole blood serotonin content, NOT-latency, HAT-score, and TI induction times (P < 0.05) and decreased serum interleukin-6 content and TI-duration (P < 0.05) compared with Hy-line Brown hens. Additionally, FK hens had significantly elevated whole blood corticosterone, serum interleukin-1ß and interleukin-6 levels, TI-duration, and NOT-latency (P < 0.05), and a reduced whole blood serotonin content (P < 0.05) compared with NK and DK hens. Our results indicated that KBD affected stress and fear responses, and this impact was mainly reflected by FK hens compared with NK and DK hens. We suggest that keel bone fractures are the main factor impairing hen welfare. Besides, the incidence of keel bone fractures and stress and fear responses of Lindian chickens are more severe than Hy-line Brown laying hens, indicating that the strain type can affect the health and welfare of laying hens.

Keel bone damage (KBD) impairs production performance, welfare, and health in laying hens. This study aimed to compare the incidence of KBD and investigate the effects of KBD on stress and fear in two strains of laying hens. The results showed that commercial Hy-line Brown laying hens had high egg production and low incidence of KBD compared with Lindian chickens, a Chinese native breed. Besides, Lindian chickens had higher blood serotonin content and fear responses to human approach test and novel object test than Hy-line Brown laying hens. In addition, laying hens with keel bone fractures had elevated concentrations of blood corticosterone, interleukin-1ß, and interleukin-6, and had a longer duration of tonic immobility and latency to approach a novel object, as well as reduced blood serotonin content compared with laying hens with normal and deviated keel bone. Overall, keel bone fractures caused stress and fear responses, impairing hen welfare; and behavioral and physiological responses in relation to stress and fear differed between strains of hens.

Parametric Studies on Finishing of AZ31B Magnesium Alloy with Al2O3 Magnetic Abrasives Prepared by Combining Plasma Molten Metal Powder with Sprayed Abrasive Powder.

High-performance iron-based Al2O3 magnetic abrasive powder (MAP) prepared by combining plasma molten metal powder with sprayed abrasive powder is used for magnetic abrasive finishing (MAF) of AZ31B magnesium alloy to remove surface defects such as creases, cracks, scratches, and pits generated during the manufacturing process of the workpiece, and to reduce surface roughness and improve its wear and corrosion resistance. In order to solve the problem of magnetic abrasive powder splash in the MAF process, the force analysis of the MAP in the processing area is conducted, and a composite magnetic pole processing device was designed and simulated to compare the effects of both devices on MAF, confirming the feasibility of composite magnetic pole grinding. Then, experiments have been designed using Response Surface Methodology (RSM) to investigate the effect of four factors-magnetic pole rotation speed, grinding gap, magnetic pole feed rate, magnetic abrasive filling quantity-on surface roughness and the interactions between them. The minimum surface roughness value that can be obtained is used as the index for parameter optimization, and the optimized parameters are used for experiments, and the results show that the established surface roughness model has good predictive ability.

Study on the Micro Removal Process of Inner Surface of Cobalt Chromium Alloy Cardiovascular Stent Tubes.

Due to the special manufacturing process of cobalt-chromium alloy cardiovascular stent tubes, there are serious surface defects in their inner walls, which affects the therapeutic effect after implantation. At the same time, the traditional processing technology cannot finish the inner wall of a cardiovascular stent tube. In light of the above problems, magnetic abrasive finishing (MAF) equipment for the inner wall of an ultra-fine and ultra-long cardiovascular stent tube is proposed, and MAF technology is used to improve the surface quality of its inner wall. High-performance spherical magnetic abrasive powders are used to finish the inner wall of a cobalt-chromium alloy cardiovascular stent tube with an inner diameter of 1.6 mm and an outer diameter of 1.8 mm. The effects of finishing time, tube rotational speed, feed speed of the magnetic pole, MAPs filling quantity, and MAP abrasive size on the surface roughness and material removal thickness of cobalt-chromium alloy cardiovascular stent tube are investigated. The results show that the surface roughness of the inner wall of the cobalt-chromium alloy cardiovascular stent decreases from 0.485 µm to 0.101 µm, and the material removal thickness of the defect layer is 4.3 µm. MAF technology is used to solve the problem of the poor surface quality of the inner walls of ultra-fine and ultra-long cobalt-chromium alloy cardiovascular stent tubes.

Fabrication of Ultra-Fine and Ultra-Long Copper Tube Electrodes by Ultrasonic High-Frequency Percussion.

In this study, a new method of ultrasonic high-frequency percussion (UH-FP) is proposed. Ultra-fine and ultra-long copper tube electrodes cannot be fabricated by traditional processing methods, and the copper tube electrodes fabricated by UH-FP can be used in the process of rotary EDM for microfine holes. The UH-FP setup has been established based on an ultrasonic device, a workpiece chucking and rotation device, and a workpiece reciprocating motion device. In this work, by studying the principle of ultrasonic processing, the processing principle and mechanism of ultra-fine and ultra-long copper tube electrode preparation by ultrasonic high-frequency percussion is proposed. The effects of processing parameters (i.e., rotational speed, feed rate, working gap, percussion amplitude) on surface roughness are evaluated quantitatively. Experimental results show that the proposed method could complete the core leach of the core-containing copper tube electrodes after drawing, while improving surface quality. Some surface defects such as cracks, scratches and folds were completed removed, further improving the mechanical performance of processed parts. The surface roughness (Ra) of 0.091 µm was obtained from the initial 0.46 µm under the optimal processing parameters of 800 rpm tube rotational speed, 200 mm/min platform feed speed, 0.13 mm machining gap, 0.15 mm percussion amplitude, and 32 min machining time. The method shows potential for manufacturing copper tube electrodes for a wide range of industrial applications.