Assessment of emissions and exposure in 3D printing workplaces in Taiwan.

Three-dimensional (3D) printing is an emerging and booming industry in Taiwan. Compared to traditional manufacturing, 3D printing has various advantages, such as advanced customization, additive manufacturing, reduced mold opening time, and reduced consumption of precursors. In this study, the real-time monitoring of particulate matter (PM) and total volatile organic compound (TVOC) emissions from various filaments is investigated using fused deposition modeling with material extrusion technology, a liquid-crystal display, a stereolithography apparatus based on vat photopolymerization technology, and binder jetting for occupational settings. An exposure assessment for nearby workers using the 3D printing process was performed, and improvement measures were recommended. Nine 3D printing fields were measured. The generation rate of ultrafine particles ranged from 1.19 × 1010 to 4.90 × 1012 #/min, and the geometric mean particle size ranged from 30.91 to 55.50 nm. The average concentration of ultrafine particles ranged from 2.31 × 103 to 7.36 × 104 #/cm3, and the PM2.5 and PM10 concentrations in each field ranged from 0.74 ± 0.27 to 12.46 ± 5.61 µg/m3 and from 2.39 ± 0.60 to 30.65 ± 21.26 µg/m3, respectively. The TVOC concentration ranged from 0.127 ± 0.012 to 1.567 ± 0.172 ppm. The respiratory deposition (RDUFPs) dose ranged from 2.02 × 1013 to 5.54 × 1014 nm2/day. Depending on the operating conditions, appropriate control and protective measures should be employed to protect workers' health.

Novel visible-light-active P-g-CN-based α-Bi2O3/WO3 ternary photocatalysts with a dual Z-scheme heterostructure for the efficient decomposition of refractory ultraviolet filters and environmental hormones: Benzophenones.

The ubiquitous and refractory benzophenone (BP)-type ultraviolet filters, which are also endocrine disruptors, were commonly detected in the aquatic matrix and could not be efficiently removed by conventional wastewater treatment processes, thus causing extensive concern. Herein, a novel ternary nanocomposite, P-g-CN/α-Bi2O3/WO3 (P-gBW), was successfully fabricated by mixing cocalcinated components and applied to the decomposition of BP-type ultraviolet filters. The dual-Z-scheme heterostructure of P-gBW enhances visible-light absorption, efficiently facilitates separation and mobility, and prolongs the lifetime of photoinduced charge carriers via double charge transfer mechanisms. The optimum 95 wt% P-gBW exhibited excellent photocatalytic activity, degrading 96% 4-hydroxy benzophenone (4HBP) within 150 min and 93% 2,2',4,4'-tetrahydroxybenzophenone (BP-2) within 100 min under visible-light illumination, respectively. The pseudo-first-order rate constant of 4HBP (1.15 h-1) was 6.8-, 3.1-, 3.3- and 2.2-fold higher than those of WO3, P-g-CN, α-Bi2O3, and P-g-CN/α-Bi2O3, respectively, while that of BP-2 (1.71 h-1) was 5.2-, 2.2-, 3.2- and 1.5-fold higher, respectively. The improved photocatalytic degradation was attributed to efficient photoinduced charge carrier separation and migration and prevented the recombination of electron holes, as verified by photoluminescence, transient photocurrent response, and electrochemical impedance spectroscopy. Trapping experiments, electron paramagnetic resonance, and band energy position indicated an efficient dual-Z-scheme heterostructure.

Effect of selected sampling media, flow rate, and time on the sampling efficiency of a liquid impinger packed with glass beads for the collection of airborne viruses.

The liquid impingers can be used for sampling of viral aerosols, such as COVID-19 virus, influenza, and measles. However, the lowest cutoff diameter of commercially available liquid impingers was about 0.3 µm, and the physical collection efficiency for nano-bioaerosol is only about 10-20%. Here, we enhanced the impinger's collection efficiency and recovery of viable viral aerosols by using packed glass beads and selected sampling media (1% peptone and lysogeny broth, LB). Single-stranded RNA (ssRNA) MS2 bacteriophage with uranine (as a physical tracer) was used as model viral aerosols. The effects of different sampling flow rates (4, 6, and 12.5 L per minute) and different sampling time (10, 20, and 30 min) on the collection efficiency and recovery of MS2 aerosols were also tested. Collection efficiency and recovery of viable viral aerosols were analyzed as a function of sampling media, flow rate, and sampling time and packed glass beads by using a general linear model. Although the packed glass beads considerably enhanced the collection efficiency of the liquid impinger for MS2 aerosols, the recovery of viable MS2 becomes lower due to the higher pressure drop across the impinger. Using peptone or LB as sampling media, reducing sampling flow rate, and decreasing sampling time was proven to improve the recovery of viable MS2. Conclusively, this study provides some practical methods to improve the collection efficiency of liquid impinger for viral aerosols and preserve their viability.

Effective disinfection of airborne microbial contamination in hospital wards using a zero-valent nano-silver/TiO2 -chitosan composite.

A novel antimicrobial composite of zero-valent silver nanoparticles (AgNPs), titania (TiO2 ), and chitosan (CS) was prepared via photochemical deposition of AgNPs on a CS-TiO2 matrix (AgNPs@CS-TiO2 ). Electron microscopy showed that the AgNPs were well dispersed on the CS-TiO2 , with diameters of 6.69-8.84 nm. X-ray photoelectron spectra indicated that most of the AgNPs were reduced to metallic Ag. Fourier-transform infrared spectroscopy indicated that some AgNPs formed a chelate with CS through coordination of Ag+ with the CS amide II groups. The zones of inhibition of AgNPs@CS-TiO2 for bacteria (Escherichia coli and Staphylococcus epidermidis) and fungi (Aspergillus niger and Penicillium spinulosum) were 6.72-11.08 and 5.45-5.77 mm, respectively, and the minimum (critical) concentrations of AgNPs required to inhibit the growth of bacteria and fungi were 7.57 and 16.51 µg-Ag/mm2 , respectively. The removal efficiency of a AgNPs@TiO2 -CS bed filter for bioaerosols (η) increased with the packing depth, and the optimal filter quality (qF) occurred for packing depths of 2-4 cm (qF = 0.0285-0.103 Pa-1 ; η = 57.6%-98.2%). When AgNPs@TiO2 -CS bed filters were installed in the ventilation systems of hospital wards, up to 88% of bacteria and 97% of fungi were removed within 30 minutes. Consequently, AgNPs@TiO2 -CS has promising potentials in bioaerosol purification.

Evaluation of PM1, PM2.5, and PM10 exposure and the resultant health risk of preschool children and their caregivers.

Preschool children have a higher respiratory rate per unit body weight than adults, and their respiratory systems are not mature. Hence, children may have more health risks associated with particulate matter (PM) exposure. In this study, we assessed the exposure of preschool children and their caregivers to PM and the resulting health risks. The PM concentrations at heights of 60-80 cm (preschool children) and 150 cm (adults) were measured at ten indoor and eight outdoor sites in the Taipei metropolitan area from March 2015 to February 2017. Four PM2.5 and seven PM10 indoor measurements exceeded the indoor air quality standard of Taiwan, whereas only two PM2.5 outdoor measurements exceeded the ambient air quality standard. The outdoor PM concentrations were related to traffic emissions, whereas the indoor PM concentrations were associated with ventilation rate and occupant density. The chronic daily PM1, PM2.5, and PM10 intakes of preschool children were notably higher than those of adults. In addition, the hazard quotient resulting from PM2.5 exposure indicated a significant health risk for preschool children (93.74% greater than 1). Consequently, reducing the exposure of preschool children to PM2.5 is an emerging issue in the Taipei metropolitan area.

Interactive effects of nonylphenol and bisphenol A exposure with oxidative stress on fetal reproductive indices.

Nonylphenol (NP) and/or bisphenol A (BPA) may have reproductive effects. Although the mechanisms of action remain unclear, steroid hormones biosynthesis, hypothalamus pituitary adrenal axis activity, oxidative stress, and crosstalk interaction of NP and BPA mixture and its pathways may play a contributory role. This cross-sectional study examined whether the interactive effects of NP/BPA and oxidative stress biomarkers played a role in reproductive indices (penis length and anogenital distance (AGD)) in 244 mother-fetus pairs. Four biomarkers of oxidative stress, (8-hydroxy-2'-deoxyguanosine (8-OHdG), 8-nitroguanine (8-NO2Gua), 8-iso-prostaglandin F2α (8-isoPF2α), and 4-hydroxy-2-nonenal-mercapturic acid (HNE-MA)) were simultaneously analyzed using the high-performance liquid chromatography-electrospray ionization tandem mass spectrometry method. No significant associations were found between reproductive indices and NP/BPA or oxidative stress biomarkers. Maternal exposure to a mixture of NP and BPA may enhance 8-OHdG. Interactive effects were found in the high 8-isoPF2α group, and prenatal NP exposure was inversely associated with penis length (ß = -3.68 mm; p = 0.01). Similar results were noted among boys who were born to mothers in the high 8-isoPF2α group, in which BPA was inversely associated with penis length (ß = -4.43 mm; p = 0.005). Our findings suggest important implications for prenatal exposure to oxidative stress, as evidenced by the 8-isoPF2α level. Thus, NP and BPA may interact to shape fetal reproductive tract development, particularly in boys. The interactive effects of NP/BPA, oxidative stress, and reproductive indices should be considered.

Improving the collection efficiency of the liquid impinger for ultrafine particles and viral aerosols by applying granular bed filtration.

Liquid impingers are utilized to collect bioaerosols for many advantages, such as avoiding dehydration of biological agents. However, many previous studies have reported that the liquid impingers are surprisingly inefficient for the collection of ultrafine bioaerosols, with collection efficiencies <30%. In the present work, we have successfully improved the collection efficiency of the liquid impinger (AGI30) to as high as 99% for particles in the size range of 20-400 nm with the aid of packed glass beads. We also systematically investigated the effects of influential factors on the collection efficiency. These factors include the volume of the sampling liquid (0, 20 and 30 mL), depth (0, 7 and 10 cm) of packed glass beads and sampling flow rate (4, 6 and 8 liter per min, lpm). According to our experimental results, increasing the depth of packed glass beads and the volume of sampling liquid can enhance the collection efficiency. Also, decreasing the sampling flow rate can increase the collection efficiency and reduce the loss of sampling liquid. For the sampling of viable MS2 phages, the collection efficiency of AGI30 sampler with packed glass beads is much higher than that without packed glass beads. Conclusively, this study validates that the granular bed filtration can enhance the collection efficiency of liquid impingers for submicron and ultrafine particles and viral aerosols.

For the inactivation of mold spores by UVC irradiation, with ozone acting as a promoter, TiO2 nanoparticles may act better as a "sun block" than as a photocatalytic disinfectant.

Fungal spores are known as critical indoor allergens, and indoor air purification techniques including photocatalytic disinfection using titanium dioxide (TiO2), ultraviolet germicidal irradiation (UVGI) and ozonation, have been considerably investigated. However, most of the research is in regard to photocatalytic disinfection, focused on the anti-bacterial efficacy of TiO2 nanoparticles (NPs). Furthermore, some research even showed that the photocatalytic antifungal efficacy of TiO2 NPs may not be that significant. Thus, investigating the reasons behind the non-significant antifungal efficacy of TiO2 photocatalytic disinfection and enhancing the antifungal efficacy is indispensable. In this study, ozone was employed to improve the photocatalytic antifungal efficacy of the TiO2 NPs and nano-metal supported on TiO2 NPs. The commercial TiO2 NPs (Degussa (Evonik) P25) served as a good support, and incipient wetness impregnation was successfully exploited to prepare oxidized nano-metals (Ag, Cu and Ni) in this study. There were two surfaces (quartz and putty) used in the inactivation experiments of Aspergillus niger spores which were manipulated under two conditions: exposed to ultraviolet (UVC) light , and exposed to UVC and ozone simultaneously. The SEM images demonstrated that the spores were sheltered from UVC light in the microcracks between TiO2 agglomerates. When irradiating with UVC, the A. niger spores on the two testing surfaces, without TiO2 NPs, were inactivated faster than those with TiO2 NPs, implying a "sun block" effect of this material and a lower photocatalytic antifungal efficacy than UVGI. On both surfaces, the inactivation rate constants (k) of A. niger spores exposed to UVC and ozone simultaneously (on quartz: k = 2.09-6.94 h(-1), on putty: k = 3.17-6.66 h(-1)) were better than those exposed to only UVC (on quartz: k = 1.80-5.89 h(-1); on putty: k = 2.97-3.98 h(-1)), indicating ozone can enhance the UVGI antifungal efficacy.

Removal of indoor α-pinene with a fiber optic illuminated honeycomb monolith photocatalytic reactor.

This study was undertaken to investigate the influencing factors including gas flow rate, inlet α-pinene concentration and relative humidity on the removal of α-pinene in a Degussa P25 supported honeycomb monolith reactor. We used the fiber optic illumination to enhance the intensity of UV-light irradiating on the Degussa P25 photocatalyst. The α-pinene conversion increased with the increase of gas flow rate indicating that the reaction rate was associated with the gaseous phase mass transfer. The α-pinene conversion varied between 91% and 96% in the range of inlet α-pinene concentration (400-2400 ppb) and relative humidity (30-70%) examined. The kinetics fits the Langmuir-Hinshelwood model. The rate coefficient (k) of α-pinene under RH30%, 50% and 70% was 0.82, 0.24, and 0.18 µmol m(-2)s(-1), respectively. The competitive Langmuir adsorption constants for α-pinene under RH30%, 50% and 70% were 0.17, 0.56 and 1.74 ppm(-1), respectively. The effect of relative humidity on α-pinene conversion depends on the inlet α-pinene concentration and raising relative humidity in sum has a positive effect on the reduction of partially oxidized intermediates within the range investigated.

High-efficiency carbon-coated steel wool filter for controlling cooking-induced oil smoke.

Cooking oil smoke (COS) contains many harmful substances, such as particulate matter, formaldehyde, and phenyl esters. Currently, commercial COS treatment equipment is expensive and requires a large space. Furthermore, a large amount of agricultural waste is generated and is mainly burned onsite, producing large amounts of greenhouse gases and air pollutants. This waste could be reused as a precursor for biochar and activated carbon. Therefore, this research used saccharification and catalytic hydrothermal carbonization to process rice straw and produce compact carbon-based filters (steel wool-C) for removing cooking-induced pollutants. Scanning electron microscopy indicated that carbon layers were coated on the steel wool. The Brunauer-Emmett-Teller surface area of the carbon filter was 71.595 m2/g, 43 times larger than that of steel wool. The steel wool filter removed 28.9%-45.4% of submicron aerosol particles. Adding a negative air ionizer (NAI) to the filter system enhanced the particle removal efficiency by 10%-25%. The removal efficiency of total volatile organic compounds was 27.3%-37.1% with the steel wool filter, but 57.2%-74.2% with the carbon-containing steel wool filter, and the NAI improved the removal efficiency by approximately 1%-5%. The aldehyde removal efficiency of the carbon filter with NAI was 59.0%-72.0%. Conclusively, the compact steel wool-C and NAI device could be promising COS treatment equipment for households and small eateries.

Effectiveness of a covered oil-free cooking process on the abatement of air pollutants from cooking meats.

Cooking events can generate household air pollutants that deteriorate indoor air quality (IAQ), which poses a threat to human health and well-being. In this study, the emission characteristics and emission factors (EFs) of air pollutants of different meats (beef, lamb, chicken, pork, and fish) cooked by a novel oil-free process and common with-oil processes were investigated. Oil-free cooking tends to emit lower total volatile organic compound (TVOC) levels and fewer submicron smoke particles and can reduce the intake of fat and calories. However, TVOC emissions during oil-free cooking were significantly different, and the lamb EFs were nearly 8 times higher than those during with-oil cooking. The particle-bound polycyclic aromatic hydrocarbon (Æ©PPAH) and benzo(a)pyrene-equivalent (Æ©BaPeq) EFs during with-oil cooking ranged from 76.1 to 140.5 ng/g and 7.7-12.4 ng/g, respectively, while those during oil-free cooking ranged from 41.0 to 176.6 ng/g and 5.4-47.6 ng/g, respectively. The Æ©PPAH EFs of chicken, pork, and fish were lower during oil-free cooking than during cooking with oil. Furthermore, the Æ©BaPeq EFs of beef, chicken, pork, and fish were lower during oil-free cooking than during cooking with oil. Therefore, it is recommended to use the oil-free method to cook chicken, pork, and fish to reduce Æ©PPAH and Æ©BaPeq emissions, but not recommended to cook lamb due to the increase of Æ©BaPeq emissions. The with-oil uncovered cooking EFs of aldehydes ranged from 3.77 to 22.09 µg/g, and those of oil-free cooking ranged from 4.88 to 19.96 µg/g. The aldehyde EFs were lower during oil-free covered cooking than with-oil uncovered cooking for beef, chicken, and fish. This study provides a better realizing of new cooking approaches for the reduction of cooking-induced emission, but further research on the effects of food composition (moisture and fat) and characteristics is needed.

Enhancement of the deposition of ultrafine secondary organic aerosols by the negative air ion and the effect of relative humidity.

Deposition is an important process for the removal of aerosol particles. Negative air ion (NAI) generators can charge the ultrafine airborne particles and enhance their deposition rate. However, many NAI generators may also emit ozone and increase the concentration of particles in the presence of biogenic volatile organic compounds owing to the secondary organic aerosol (SOA) production. To validate the effectiveness of NAI generator the authors investigated the enhancement effect of an NAI generator on the deposition of the ultrafine SOAs generated from the ozonolysis of d-limonene in a test chamber under controlled ventilation rate and relative humidity (RH). The experimental results demonstrated that compared with other effects, including the gravity, particle eddy diffusion, and the Brownian diffusion, the effect of NAIs is the most dominate one on the deposition of SOA particles onto the wall surface in the near-wall region (<1 cm away from the wall). According to these experiments, the tested NAI generator could efficiently enhance the deposition rate by an enhancement factor ranging from 8.17 +/- 0.38 to 25.3 +/- 1.1, with a low ozone production rate. This NAI generator had better performance on the deposition of the SOAs with smaller particle sizes and it performed even better under higher RH. The enhancement effect of the NAI generator was related to its high NAI production and electric field strength.

Association between satellite-based estimates of long-term PM2.5 exposure and cardiovascular disease: evidence from the Indonesian Family Life Survey.

Exposure to particulate matter with a diameter < 2.5 µm (PM2.5) increases the risk of cardiovascular disease (CVD), which is the leading cause of both morbidity and mortality in Indonesia, accounting for one-third of all deaths. Indonesian authorities started to monitor PM2.5 levels in urban areas in 2015. However, there is still no study examining the association between long-term PM2.5 exposure and CVD in Indonesia. In this study, we combined PM2.5 data and health survey data. Long-term (2000-2007) exposure to PM2.5 was measured based on satellite-derived aerosol optical depth measurements (1 × 1 km2) that could be used to predict ground-level PM2.5 concentrations. Population data on residents of Sumatra Island were obtained from the fourth wave of the Indonesian Family Life Survey (IFLS). A cross-sectional study was performed with 2324 participants who were aged ≥ 40 years old, and a report of doctor-diagnosed CVD determined CVD status. We used logistic regression to analyze the association between PM2.5 and CVD prevalence, adjusting for multiple covariates. Of the sample, 52.1% were women, and 47.9% were men. The sample was divided into those aged 40-59 (adults) and those ≥ 60 (older adults). The CVD prevalence was 4.05% (n = 94), with a mean (standard deviation) PM2.5 concentration of 14.4 (6.4) µg/m3. In adjusted models, a 10-µg/m3 increase in annual average PM2.5 levels was associated with 29% higher odds of having CVD (odds ratio = 1.29; 95% confidence interval: 1.02, 1.47). In this population-based IFLS data, long-term exposure to PM2.5 is associated with a higher prevalence of CVD in Sumatera, Indonesia.

Risk assessment of inhalation exposure to polycyclic aromatic hydrocarbons in Taiwanese workers at night markets.

OBJECTIVE: To examine the inhalation exposure of cooks at night markets in Taiwan to PAHs and to estimate the corresponding potential human health risks posed by the inhalation of carcinogenic PAHs. METHODS: Eight-hour personal air samples collecting particle-bound PAHs and XAD-2 retaining PAHs in the gas phase were taken by personal PM(2.5) cyclones with cooks carrying the sampler on the shoulder while cooking at selected food stalls at four night markets in Taipei, and the concentrations of 16 priority PAHs in both particulates and air were measured with GC/MS. RESULTS: The total identified PAHs in both gas and PM(2.5) phases exposed by cooks during cook hours ranged from 233,995 to 44,166 ng m(-3). Total exposed PAHs in cooks, as well as the percentage of PAHs in PM(2.5), were the highest at the barbecue stall F3. The fractions of gaseous PAHs (97%) in the four food stalls were consistently higher than the fractions of particulate PAHs (3%). The diagnostic ratios of PAHs fell within the range of those found in other studies related to cooking. At all typical food stalls in night markets except for F2, the excess lifetime cancer risk (ELCR) of cooks are beyond the acceptable target risk range of 10(-6) to 10(-4) for occupational workers set by USEPA. CONCLUSION: The PAHs measured in the night markets originated from combustion due to food cooking. The control of gaseous PAH emissions would be more important than the fractions of particulate PAH emissions. Occupational exposure to cooking emissions in Taiwanese workers at night markets is of health concern. Thus, effective protective measures are therefore suggested to minimize cooks' exposure to such emissions, such as wearing mask of activated carbon, evacuating the exhaust into water tank with bio-surfactant to improve PAH removal, installing effective mechanical exhaust vacuum or building high exhaust fume hood above cooking ovens.

Effectiveness of the Nanosilver/TiO2-Chitosan Antiviral Filter on the Removal of Viral Aerosols.

Background: The precaution of airborne transmission of viruses, such as influenza, SARS, MERS, and COVID-19, is essential for reducing infection. In this study, we applied a zero-valent nanosilver/titania-chitosan (nano-Ag0/TiO2-CS) filter bed, whose broad-spectrum antimicrobial efficacy has been proven previously, for the removal of viral aerosols to minimize the risk of airborne transmission. Methods: The photochemical deposition method was used to synthesize the nano-Ag0/TiO2-CS antiviral material. The surface morphology, elemental composition, and microstructure of the nano-Ag0/TiO2-CS were analyzed by a scanning electron microscopy/energy dispersive X-ray spectroscopy and a transmission electron microscopy, respectively. The MS2 bacteriophages were used as surrogate viral aerosols. The antiviral efficacy of nano-Ag0/TiO2-CS was evaluated by the MS2 plaque reduction assay (PRA) and filtration experiments. In the filtration experiments, the MS2 aerosols passed through the nano-Ag0/TiO2-CS filter, and the MS2 aerosol removal efficiency was evaluated by an optical particle counter and culture method. Results and Conclusions: In the MS2 PRA, 3 g of nano-Ag0/TiO2-CS inactivated 97% of MS2 bacteriophages in 20 mL liquid culture (2 ± 0.5 × 1016 PFU/mL) within 2 hours. The removal efficiency of nano-Ag0/TiO2-CS filter (thickness: 6 cm) for MS2 aerosols reached up to 93%. Over 95% of MS2 bacteriophages on the surface of the nano-Ag0/TiO2-CS filter were inactivated within 20 minutes. The Wells-Riley model predicted that when the nano-Ag0/TiO2-CS filter was used in the ventilation system, airborne infection probability would reduce from 99% to 34.6%. The nano-Ag0/TiO2-CS filter could remain at 50% of its original antiviral efficiency after continuous operation for 1 week, indicating its feasibility for the control of the airborne transmission.

The effect of ozone on the removal effectiveness of photocatalysis on indoor gaseous biogenic volatile organic compounds.

In this study, the degradation of d-limonene by photocatalytic oxidation (PCO) (titanium dioxide [TiO2]/ultraviolet [UV]) and by the combination of PCO and ozone (O3) (TiO2/UV/O3) was investigated to evaluate the enhancement effect of O3. The degradation of d-limonene by UV/O3 was also investigated for comparison. The experiments were conducted with a quartz photoreactor under various gas flow rates (600-1600 mL min(-1)), d-limonene concentrations (0.5-9 parts per million [ppm]), and relative humidity (RH) (20-80%). The d-limonene removal efficiency of TiO2/UV/O3, TiO2/UV, and UV/O3 ranged from 62 to 99%, from 49 to 99%, and from 46 to 75%, respectively. The addition of 120-ppb O3 can enhance the d-limonene removal efficiency of PCO up to 12%. The apparent kinetic parameters (apparent rate constants, kapparent and Langmuir adsorption constants, Kapparent of TiO2/UV and TiO2/UV/O3 reactions obtained from fitting Langmuir-Hinshelwood models are TiO2/UV: kapparent = 1.45 x 10(-3) ppm-m sec(-1), Kapparent = 0.34 ppm(-1); TiO2/ UV/O3: kapparent = 1.83 x 10(-3) ppm-m sec(-1), and Kapparent = 0.35 ppm(-1). When RH was higher than 40%, the residual intermediates yield rates of d-limonene of TiO2/UV/O3, TiO2/UV, and UV/O3 reactions ranged from 0.39 to 0.51 micromol carbon m(-2) sec(-1), 0.56 to 1.96 micromol carbon m(-2) sec(-1), and 157 to 177 micromol carbon m(-3) sec(-1), respectively. In the photocatalytic reaction experiments, the addition of 120-parts per billion (ppb) O3 can reduce the residual intermediates yield rates of d-limonene by up to 1.46 micromol carbon m(-2) sec(-1). These experimental results showed that O3 can enhance the effectiveness of photocatalysis on the removal of d-limonene.

Feasibility of using bed filters packed with rice-straw-based activated carbon and selected biomass waste for the control of frying fume exhaust.

Open-air burning of rice straw (RS) on sites after harvesting produces tremendous amounts of air pollutants in Southeast Asia. Additionally, cooking oil smoke (COS) from high-temperature frying is classified as "Probably carcinogenic to humans" (Group 2A) by the International Agency for Research on Cancer. To mitigate the air pollution from COS, RS was recycled to prepare activated carbon (AC), which was used as a bed filter (BF) packing material for COS removal, and to our best knowledge, this study is the first one. Besides, a negative air ionizer (NAI) was firstly utilized to enhance the removal efficiency (η) of COS particles. Other biomass waste, including tea leaves (TL), wood dust (WD), rice hulls (RH), and coffee grounds (CG), were also used as packing materials for comparison. Specific surface area and pore volume of the packing materials were determined by nitrogen adsorption/desorption isothermal. Laser airborne particle counters and volatile organic compound (VOC) monitors (photoionization detector) were utilized for real-time recording of the particle and VOC concentration of COS. Economic assessments for the control of COS was also conducted. For submicron particles, the removal efficiency of the BFs ranged from 0 to 98% and the AC filter had the highest quality factor. The NAI remarkably enhanced the η value and filter quality factor. For the removal of particles larger than 2.5 µm, all BFs had η > 96%. The removal efficiency of volatile organic compounds (VOCs) (ηVOC) of the test BFs ranged from 18.22 to 90.8%. The AC filter had the largest pore volume (0.432 cm3/g) and surface area (877 m2/g) among all packing materials, causing this filter to have the highest ηVOC and adsorption capacity (over 28.3 mg-VOCs/g-AC). The annual operating costs of the TL, WD, RH, CG, and AC filters were 319.4, 23.3, 29.1, 189.4, and 62.9 US$, respectively. Therefore, using RS to prepare an AC bed filter for the removal of COS is a practical and sustainable strategy for COS control.

Removal of bioaerosols by the combination of a photocatalytic filter and negative air ions.

This study focused on the investigation of the effectiveness of negative air ionization (NAI), photocatalytic oxidation (PCO), and the combination of NAI and PCO on the removal of aerosolized Escherichia coli, Candida famata, and λ vir phage under different relative humidity. The experiments were conducted with a stainless steel reactor equipped with a negative air ion generator, a photocatalytic filter, and two ultraviolet lamps with 365 nm wavelength. The removal efficiency ( η ) , defined as one minus the ratio of the outlet concentration to the inlet concentration of the appropriate bioaerosol, was used to evaluate the effectiveness of the removal methods. The combination of NAI and PCO was the most efficient removal method for aerosolized E. coli ( η = 0.304 ± 0.06 - 0.364 ± 0.008 ) , C. famata ( η = 0.433 ± 0.08 - 0.598 ± 0.047 ) , and λ vir phage ( η = 0.689 ± 0.02 - 0.903 ± 0.06 ) . In this removal method, the contributions of NAI were higher than those of PCO for the removal of E. coli and C. famata; for the removal of λ virus phage the contributions of NAI and PCO were comparable NAI was the least efficient removal method for bioaerosols, and the removal efficiencies are: η = 0.175 ± 0.04 - 0.245 ± 0.03 for E. coli; η = 0.216 ± 0.007 - 0.297 ± 0.044 for C. famata; and η = 0.299 ± 0.12 - 0.384 ± 0.02 for λ vir phage.

The size and concentration of droplets generated by coughing in human subjects.

This work investigated the size distribution of the droplet nuclei and coughed droplets by test subjects. The size distributions of droplet nuclei coughed by test subjects were determined with an aerodynamic particle sizer (APS) and scanning mobility particle sizer (SMPS) system (system 1). Coughed droplets were only sampled with the APS system (system 2). Two different schemes were employed in system 2. Furthermore, the size distribution of coughed droplets of different ages and gender was investigated to identify the effects of age and gender on droplet size distribution. Results indicated the total average size distribution of the droplet nuclei was 0.58-5.42 microm, and 82% of droplet nuclei centered in 0.74-2.12 microm. The entire average size distribution of the coughed droplets was 0.62-15.9 microm, and the average mode size was 8.35 microm. The size distribution of the coughed droplets was multimodal. The size distribution of coughed droplets showed three peaks at approximately 1 microm, 2 microm, and 8 microm. These analytical findings indicate that variation for average droplet size among the three age groups was insignificant (p > 0.1). Moreover, the variation in average droplet size between males and females was also insignificant (p > 0.1). Also, the variation in droplet concentration between males and females was significant (p > 0.1). Droplet nuclei concentrations from male subjects were considerably higher than that from females. Comparison of the droplet concentrations for subjects in different age groups demonstrated that subjects in the 30-50-year age group have the largest droplet concentrations.

Enhanced antimicrobial efficacy of thermal-reduced silver nanoparticles supported by titanium dioxide.

The antimicrobial efficacy of silver nanoparticles (AgNPs) is influenced by many factors, including the particle size, AgNP oxidation state and support materials. In this study, AgNPs are synthesized and supported by two types of TiO2 powders (P25 and Merck TiO2) using two heat-treatment temperatures (120 and 200°C). The formation of well-dispersed AgNPs with diameters ranging from 3.2 to 5.7nm was confirmed using transmission electron microscopy. X-ray photoelectron spectroscopy and X-ray diffraction indicated that the majority of the AgNPs were reduced from Ag+ to Ag0 at 200°C. The AgNP antimicrobial activity was determined by the zone of inhibition against three fungi, A. niger, P. spinulosum and S. chartarum, and two bacteria, E. coli (Gram-negative) and S. epidermidis (Gram-positive). The antimicrobial activity of metallic AgNPs was more pronounced than that of silver nitrate and some antimicrobial drugs. The AgNPs exhibited optimal antimicrobial efficacy when the AgNP dispersion on the surface of TiO2 was in the region between 0.2 and 0.7µg-Ag/m2. The minimum (critical) AgNP concentrations needed to inhibit the growth of bacteria (E. coli) and fungi (A. niger) were 13.48 and 25.4µg/mL, respectively. The results indicate that AgNPs/TiO2 nanocomposites are a promising disinfectant against both bacteria and fungi.