Synthesis and Broadband Photodetection of a P-Type 1D Van der Waals Semiconductor HfSnS3.

1D van der Waals (vdW) materials have attracted significant interest in recent years due to their giant anisotropic and weak interlayer-coupled characters. More 1D vdW materials are urgently to be exploited for satisfying the practice requirement. Herein, the study of 1D vdW ternary HfSnS3 high-quality single crystals grown via the chemical vapor transport technique is reported. The Raman vibration modes and band structure of HfSnS3 are analyzed via DFT calculations. Its strong in-plane anisotropic is verified by the polarized Raman spectroscopy. The field-effect transistors (FETs) based on the HfSnS3 nanowires demonstrate p-type semiconducting behavior as well as outstanding photoresponse in a broadband range from UV to near-infrared (NIR) with short response times of ≈0.355 ms, high responsivity of ≈11.5 A W-1 , detectivity of ≈8.2 × 1011 , external quantum efficiency of 2739%, excellent environmental stability, and repeatability. Furthermore, a typical photoconductivity effect of the photodetector is illustrated. These comprehensive characteristics can promote the application of the p-type 1D vdW material HfSnS3 in optoelectronics.

Ultraviolet-Visible-Short-Wavelength Infrared Broadband and Fast-Response Photodetectors Enabled by Individual Monocrystalline Perovskite Nanoplate.

Perovskite-based photodetectors exhibit potential applications in communication, neuromorphic chips, and biomedical imaging due to their outstanding photoelectric properties and facile manufacturability. However, few of perovskite-based photodetectors focus on ultraviolet-visible-short-wavelength infrared (UV-Vis-SWIR) broadband photodetection because of the relatively large bandgap. Moreover, such broadband photodetectors with individual nanocrystal channel featuring monolithic integration with functional electronic/optical components have hardly been explored. Herein, an individual monocrystalline MAPbBr3 nanoplate-based photodetector is demonstrated that simultaneously achieves efficient UV-Vis-SWIR detection and fast-response. Nanoplate photodetectors (NPDs) are prepared by assembling single nanoplate on adjacent gold electrodes. NPDs exhibit high external quantum efficiency (EQE) and detectivity of 1200% and 5.37 × 1012 Jones, as well as fast response with rise time of 80 µs. Notably, NPDs simultaneously achieve high EQE and fast response, exceeding most perovskite devices with multi-nanocrystal channel. Benefiting from the high specific surface area of nanoplate with surface-trap-assisted absorption, NPDs achieve high performance in the near-infrared and SWIR spectral region of 850-1450 nm. Unencapsulated devices show outstanding UV-laser-irradiation endurance and decent periodicity and repeatability after 29-day-storage in atmospheric environment. Finally, imaging applications are demonstrated. This work verifies the potential of perovskite-based broadband photodetection, and stimulates the monolithic integration of various perovskite-based devices.

Flexible 2D Materials beyond Graphene: Synthesis, Properties, and Applications.

2D materials are now at the forefront of state-of-the-art nanotechnologies due to their fascinating properties and unique structures. As expected, low-cost, high-volume, and high-quality 2D materials play an important role in the applications of flexible devices. Although considerable progress has been achieved in the integration of a series of novel 2D materials beyond graphene into flexible devices, a lot remains to be known. At this stage of their development, the key issues concern how to make further improvements to high-performance and scalable-production. Herein, recent progress in the quest to improve the current state of the art for 2D materials beyond graphene is reviewed. Namely, the properties and synthesis techniques of 2D materials are first introduced. Then, both the advantages and challenges of these 2D materials for flexible devices are also highlighted. Finally, important directions for future advancements toward efficient, low-cost, and stable flexible devices are outlined.

Ultra-Broadband Flexible Photodetector Based on Topological Crystalline Insulator SnTe with High Responsivity.

Topological crystalline insulators (TCIs) are predicted to be a promising candidate material for ultra-broadband photodetectors ranging from ultraviolet (UV) to terahertz (THz) due to its gapless surface state and narrow bulk bandgap. However, the low responsivity of TCIs-based photodetectors limits their further applications. In this regard, a high-performance photodetector based on SnTe, a recently developed TCI, working in a broadband wavelength range from deep UV to mid-IR with high responsivity is reported. By taking advantage of the strong light absorption and small bandgap of SnTe, photodetectors based on the as-grown SnTe crystalline nanoflakes as well as specific short channel length achieve a high responsivity (71.11 A W-1 at 254 nm, 49.03 A W-1 at 635 nm, 10.91 A W-1 at 1550 nm, and 4.17 A W-1 at 4650 nm) and an ultra-broad spectral response (254-4650 nm) simultaneously. Moreover, for the first time, a durable flexible SnTe photodetector fabricated directly on a polyethylene terephthalate film is demonstrated. These results prove the great potential of TCIs as a promising material for integrated and flexible optoelectronic devices.

Ultrasensitive negative photoresponse in 2D Cr2Ge2Te6 photodetector with light-induced carrier trapping.

Cr2Ge2Te6, a layered ferromagnetic semiconductor, has triggered extensive research interest due to its fantastic ferromagnetism and semiconducting characteristics as well as potential applications in next-generation spintronic and nanoelectronic devices. On the basis of its ferromagnetism, combined with rich electronic and optical properties, Cr2Ge2Te6 could be a promising candidate for optoelectronics including magnetophotonics and photodetectors. However, there are no relevant studies addressing this to date. In this work, we comprehensively investigated the photoresponse characteristics of few-layer Cr2Ge2Te6-based detectors. An uncommon negative photoconductivity (NPC) and correlated mechanism are explored with the Cr2Ge2Te6 photodetector. It is found that, both NPC and positive photoconductivity (PPC) may exist in an individual Cr2Ge2Te6 device, which are adjustable by control of the incident light intensity. More significantly, the NPC behavior enables ultrasensitive photoresponses of the Cr2Ge2Te6 photodetectors, where the detection of a weak light with an incident power intensity as low as 0.04 pW and a high responsivity of 340 AW-1 is achieved. This extraordinary performance demonstrates that the two-dimensional (2D) Cr2Ge2Te6 holds great promise for applications in ultraweak light detection.

Near-Infrared Photodetectors Based on MoTe2 /Graphene Heterostructure with High Responsivity and Flexibility.

2D transition metal dichalcogenides (TMDCs) have attracted considerable attention due to their impressively high performance in optoelectronic devices. However, efficient infrared (IR) photodetection has been significantly hampered because the absorption wavelength range of most TMDCs lies in the visible spectrum. In this regard, semiconducting 2D MoTe2 can be an alternative choice owing to its smaller band gap ≈1 eV from bulk to monolayer and high carrier mobility. Here, a MoTe2 /graphene heterostructure photodetector is demonstrated for efficient near-infrared (NIR) light detection. The devices achieve a high responsivity of ≈970.82 A W-1 (at 1064 nm) and broadband photodetection (visible-1064 nm). Because of the effective photogating effect induced by electrons trapped in the localized states of MoTe2 , the devices demonstrate an extremely high photoconductive gain of 4.69 × 108 and detectivity of 1.55 × 1011 cm Hz1/2 W-1 . Moreover, flexible devices based on the MoTe2 /graphene heterostructure on flexible substrate also retains a good photodetection ability after thousands of times bending test (1.2% tensile strain), with a high responsivity of ≈60 A W-1 at 1064 nm at VDS = 1 V, which provides a promising platform for highly efficient, flexible, and low cost broadband NIR photodetectors.

Flexible Broadband Graphene Photodetectors Enhanced by Plasmonic Cu3-x P Colloidal Nanocrystals.

The integration of graphene with colloidal quantum dots (QDs) that have tunable light absorption affords new opportunities for optoelectronic applications as such a hybrid system solves the problem of both quantity and mobility of photocarriers. In this work, a hybrid system comprising of monolayer graphene and self-doped colloidal copper phosphide (Cu3-x P) QDs is developed for efficient broadband photodetection. Unlike conventional PbS QDs that are toxic, Cu3-x P QDs are environmental friendly and have plasmonic resonant absorption in near-infrared (NIR) wavelength. The half-covered graphene with Cu3-x P nanocrystals (NCs) behaves as a self-driven p-n junction and shows durable photoresponse in NIR range. A comparison experiment reveals that the surface ligand attached to Cu3-x P NCs plays a key role in determining the charge transfer efficiency from Cu3-x P to graphene. The most efficient three-terminal photodetectors based on graphene-Cu3-x P exhibit broadband photoresponse from 400 to 1550 nm with an ultrahigh responsivity (1.59 × 105 A W-1 ) and high photoconductive gain (6.66 × 105 ) at visible wavelength (405 nm), and a good responsivity of 9.34 A W-1 at 1550 nm. The demonstration of flexible graphene-Cu3-x P photodetectors operated at NIR wavelengths may find potential applications in optical sensing, biological imaging, and wearable devices.

Two-dimensional topological semimetals: an emerging candidate for terahertz detectors and on-chip integration.

The importance of terahertz (THz) detection lies in its ability to provide detailed information in a non-destructive manner, making it a valuable tool across various domains including spectroscopy, communication, and security. The ongoing development of THz detectors aims to enhance their sensitivity, resolution and integration into compact and portable devices such as handheld scanners or integrated communication chips. Generally, two-dimensional (2D) materials are considered potential candidates for device miniaturization but detecting THz radiation using 2D semiconductors is generally difficult due to the ultra-small photon energy. However, this challenge is being addressed by the advent of topological semimetals (TSM) with zero-bandgap characteristics. These semimetals offer low-energy excitations in proximity to the Dirac point, which is particularly important for applications requiring a broad detection range. Their distinctive band structures with linear energy-momentum dispersion near the Fermi level also lead to high electron mobility and low effective mass. The presence of topologically protected dissipationless conducting channels and self-powered response provides a basis for low-energy integration. In order to establish paradigms for semimetal-based THz detectors, this review initially offers an analytical summary of THz detection principles. Then, the review demonstrates the distinct design of devices, the excellent performance derived from the topological surface state and unique band structures in TSM. Finally, we outline the prospective avenues for on-chip integration of TSM-based THz detectors. We believe this review can promote further research on the new generation of THz detectors and facilitate advancements in THz imaging, spectroscopy, and communication systems.

The improvement of water barrier property in gelatin/carboxymethyl cellulose composite film by electrostatic interaction regulation and its application in strawberry preservation.

Gelatin (GL) and carboxymethyl cellulose (CMC) are common natural components for edible films, but their water barrier performance are finite as hydrophilic polymers. In this study, a GL/CMC water barrier film was prepared, characterized and applied. The microstructure results showed that complex coacervation at pH 2.0 and cross-linking effect of sodium benzoate resulted in strong interaction forces and dense structure of this film. Compared with pure GL or CMC film, this novel composite film decreased water vapor permeability by approximately 90%, and possessed applicable water solubility (51.5%) and stronger barrier to oxygen and UV light. Acidic environment and sodium benzoate endowed antibacterial activity. Furthermore, the water barrier coating film decreased water loss by 47.8% and improved overall quality of fresh strawberries stored at 25 °C for 6 d. Therefore, the novel water barrier film based on complex coacervation and cross-linking is promising to control the postharvest quality of perishable berries.

Monolithically Structured van der Waals Materials for Volume-Polariton Refraction and Focusing.

Polaritons, hybrid light and matter waves, offer a platform for subwavelength on-chip light manipulation. Recent works on planar refraction and focusing of polaritons all rely on heterogeneous components with different refractive indices. A fundamental question, thus, arises whether it is possible to configure two-dimensional monolithic polariton lenses based on a single medium. Here, we design and fabricate a type of monolithic polariton lens by directly sculpting an individual hyperbolic van der Waals crystal. The in-plane polariton focusing through sculptured step-terraces is triggered by geometry-induced symmetry breaking of momentum matching in polariton refractions. We show that the monolithic polariton lenses can be robustly tuned by the rise of van der Waals terraces and their curvatures, achieving a subwavelength focusing resolution down to 10% of the free-space light wavelength. Fusing with transformation optics, monolithic polariton lenses with gradient effective refractive indices, such as Luneburg lenses and Maxwell's fisheye lenses, are expected by sculpting polaritonic structures with gradually varied depths. Our results bear potential in planar subwavelength lenses, integrated optical circuits, and photonic chips.

Inhibition of cinnamic acid and its derivatives on polyphenol oxidase: Effect of inhibitor carboxyl group and system pH.

Phenolic acids are promising inhibitors of polyphenol oxidase (PPO), but the effects of carboxyl group and pH on their inhibition effects are still unclear. In this study, methyl cinnamate, cinnamic acid and 4-carboxycinnamic acid were investigated by their inhibitory effects with pH varied from 6.8 to 5.0. Results showed that 4-carboxycinnamic acid had the strongest inhibitory effect on PPO, followed by cinnamic acid and methyl cinnamate. Acidic pH enhanced the inhibitory effects of cinnamic acid and its derivatives on PPO, and the enhancement degree, IC50 and Ki declining degree were followed as 4-carboxycinnamic acid > cinnamic acid > methyl cinnamate. Methyl cinnamate exhibited competitive inhibition on PPO, while cinnamic acid and 4-carboxycinnamic acid exhibited mixed-type inhibition. Inhibitors induced slight changes in the secondary and tertiary structures of PPO, which were enhanced by acidic pH. Molecular docking results showed that 4-carboxycinnamic acid exhibited the strongest binding ability, and the main interaction forces were around carboxyl groups, and acidic pH enhanced the binding effect through more interactions and lower binding energy. This study could provide new insights into industrial application of cinnamic acid and its derivatives for the control of enzymatic browning of fruits and vegetables.

Metal-organic frameworks-based moisture responsive essential oil hydrogel beads for fresh-cut pineapple preservation.

The preservation of fresh-cut fruits and vegetables has attracted attention to the shelf-life reduction caused by high humidity. Herein, alginate/copper ions cross-linking, in-situ growth and self-assembly techniques of metal-organic frameworks (MOFs) were utilized to prepare a moisture responsive hydrogel bead (HKUST-1@ALG). As the multistage porous structure formation, tea tree essential oil (TTO) load capacity in hydrogel bead (TTO-HKUST-1@ALG) was increased from 6.1% to 21.6%. TTO-HKUST-1@ALG had excellent moisture response performance, and the release rates of TTO increased from 33.89% to 70.98% with moisture increasing from 45% to 95%. Besides, TTO-HKUST-1@ALG exhibited excellent antimicrobial, antioxidant capacity, and biocompatibility. During storage, TTO-HKUST-1@ALG effectively improved the cell membrane integrity by maintaining the balance of reactive oxygen species metabolism. The degradation of cell wall structure and tissue softening were delayed by inhibiting the cell wall-degrading enzymes activity. Briefly, TTO-HKUST-1@ALG improved the storage quality and extended shelf-life of fresh-cut pineapple, which was a promising preservative.

Effect of sustained-release tea tree essential oil solid preservative on fresh-cut pineapple storage quality in modified atmospheres packaging.

The quality and safety of fresh-cut pineapple deteriorate during handling and storage due to physicochemical and microbial changes, so its preservation has attracted extensive attention. This study prepared sustained-release tea tree essential oil (TTO) solid preservative (SP) with an encapsulation efficiency of 71.45% and applied it on fresh-cut pineapple in modified atmospheres packaging (MAP). Results showed that TTO adsorbed on nano silicon dioxide (SiO2) was embedded in the starch-carboxymethyl cellulose network structure by extrusion. The hydrogen bond and hydrophobic interaction resulted in compact structure and good sustained-release performance of SP. The SP improved sensory quality and reduced nutrient loss and microbial spoilage of fresh-cut pineapple, which extended its shelf-life to four days. In addition, antioxidant capacity was enhanced with increasing antioxidant enzyme activity, antioxidant content, and 2,2-diphenyl-1-picrylhydrazine scavenging capacity and decreasing MDA accumulation. Therefore, sustained-release TTO solid preservative has potential for the preservation of fresh-cut pineapple.

Solution-grown BiI/BiI3 van der Waals heterostructures for sensitive X-ray detection.

X-ray detectors must be operated at minimal doses to reduce radiation health risks during X-ray security examination or medical inspection, therefore requiring high sensitivity and low detection limits. Although organolead trihalide perovskites have rapidly emerged as promising candidates for X-ray detection due to their low cost and remarkable performance, these materials threaten the safety of the human body and environment due to the presence of lead. Here we present the realization of highly sensitive X-ray detectors based on an environmentally friendly solution-grown thick BiI/BiI3/BiI (BixIy) van der Waals heterostructure. The devices exhibit anisotropic X-ray detection response with a sensitivity up to 4.3 × 104 µC Gy-1 cm-2 and a detection limit as low as 34 nGy s-1. At the same time, our BixIy detectors demonstrate high environmental and hard radiation stabilities. Our work motivates the search for new van der Waals heterostructure classes to realize high-performance X-ray detectors and other optoelectronic devices without employing toxic elements.

Ternary GePdS3: 1D van der Waals Nanowires for Integration of High-Performance Flexible Photodetectors.

One-dimensional (1D) van der Waals (vdW) materials are anticipated to leverage for high-performance, giant polarized, and hybrid-dimension photodetection owing to their dangling-bond free surface, intrinsic crystal structure, and weak vdW interaction. However, only a few related explorations have been conducted, especially in the field of flexible and integrated applications. Here, high-quality 1D vdW GePdS3 nanowires were synthesized and proven to be an n-type semiconductor. The Raman vibration and band gap (1.37-1.68 eV, varying from bulk to single chain) of GePdS3 were systemically studied by experimental and theoretical methods. The photodetector based on a single GePdS3 nanowire possesses fast photoresponse at a broadband spectrum of 254-1550 nm. The highest responsivity and detectivity reach up to ∼219 A/W and ∼2.7 × 1010 Jones (under 254 nm light illumination), respectively. Furthermore, an image sensor with 6 × 6 pixels based on GePdS3 nanowires is integrated on a flexible polyethylene terephthalate (PET) substrate and exhibits sensitive and homogeneous detection at 808 nm light. These results indicate that the ternary noble metal chalcogenides show great potential in flexible and broadband optoelectronics applications.

Alternating BiI3-BiI van der Waals Photodetector with Low Dark Current and High-Performance Photodetection.

The emerging two-dimensional (2D) van der Waals (vdW) materials and their heterostructures hold great promise for optoelectronics and photonic applications beyond strictly lattice-matching constraints and grade interfaces. However, previous photodetectors and optoelectronic devices rely on relatively simple vdW heterostructures with one or two blocks. The realization of high-order heterostructures has been exponentially challenging due to conventional layer-by-layer arduous restacking or sequential synthesis. In this study, we present an approach involving the direct exfoliation of high-quality BiI3-BiI heterostructure nanosheets with alternating blocks, derived from solution-grown binary heterocrystals. These heterostructure-based photodetectors offer several notable advantages. Leveraging the "active layer energetics" of BiI layers and the establishment of a significant depletion region, our photodetector demonstrates a significant reduction in dark current compared with pure BiI3 devices. Specifically, the photodetector achieves an extraordinarily low dark current (<9.2 × 10-14 A at 5 V bias voltage), an impressive detectivity of 8.8 × 1012 Jones at 638 nm, and a rapid response time of 3.82 µs. These characteristics surpass the performance of other metal-semiconductor-metal (MSM) photodetectors based on various 2D materials and structures at visible wavelengths. Moreover, our heterostructure exhibits a broad-band photoresponse, covering the visible, near-infrared (NIR)-I, and NIR-II regions. In addition to these promising results, our heterostructure also demonstrated the potential for flexible and imaging applications. Overall, our study highlights the potential of alternating vdW heterostructures for future optoelectronics with low power consumption, fast response, and flexible requirements.

Wafer-Scale Synthesis of 2D Dirac Heterostructures for Self-Driven, Fast, Broadband Photodetectors.

Type-II Dirac semimetal platinum ditelluride (PtTe2) is a promising functional material for photodetectors because of its specially tilted Dirac cones, strong light absorption, and high carrier mobilities. The stack of two-dimensional (2D) Dirac heterostructures consisting of PtTe2 and graphene could overcome the limit of detection range and response time occurring in the heterostructures of graphene and other low-mobility and large-gap transition metal dichalcogenides (TMDs). Here, we report an approach for achieving highly controllable, wafer-scale production of 2D Dirac heterostructures of PtTe2/graphene with tunable thickness, variable size, and CMOS compatibility. More importantly, the optimized recipes achieve the exact stoichiometric ratio of 1:2 for Pt and Te elements without contaminating the underlayer graphene film. Because of the built-in electric field at the junction area, the photodetectors based on the PtTe2/graphene heterostructure are self-driven with a broadband photodetection from 405 to 1850 nm. In particular, the photodetectors have a high responsivity of up to ∼0.52 AW-1 (without bias) and a fast response time of ∼8.4 µs. Our work demonstrated an approach to synthesizing hybrid 2D Dirac heterostructures, which can be applied in the integration of on-chip, CMOS-compatible photodetectors with near-infrared detection, high sensitivity, and low energy consumption.

Polyphenol oxidase inhibited by 4-hydroxycinnamic acid and naringenin: Multi-spectroscopic analyses and molecular docking simulation at different pH.

It is still unclear how pH affects the inhibitory effects of phenolic acids and flavonoids on polyphenol oxidase (PPO). In this study, 4-hydroxycinnamic acid and naringenin were selected to investigate their interactions with PPO from pH 6.8 to 5.0. Results showed that acidic pH could enhance the inhibitory effect of inhibitors and a greater enhancement effect was observed in 4-hydroxycinnamic acid. Fluorescence emission spectra indicated that 4-hydroxycinnamic acid and naringenin interacted with PPO and quenched its intrinsic fluorescence, which was also enhanced by acidic pH. Circular dichroism suggested that 4-hydroxycinnamic acid and naringenin could reversibly bind to PPO molecules and transform α-helix into ß-sheet. Molecular docking results revealed that 4-hydroxycinnamic acid and naringenin interacted with PPO through hydrogen bond and hydrophobic interaction, and more interactions were observed near the carboxyl group. These results indicated that acidic pH could significantly enhance the inhibitory effect of phenolic acid on PPO.

Excitonic Insulator Enabled Ultrasensitive Terahertz Photodetection with Efficient Low-Energy Photon Harvesting.

Despite the interest toward the terahertz (THz) rapidly increasing, the high-efficient detection of THz photon is not widely available due to the low photoelectric conversion efficiency at this low-energy photon regime. Excitonic insulator (EI) states in emerging materials with anomalous optical transitions and renormalized valence band dispersions render their nontrivial photoresponse, which offers the prospect of harnessing the novel EI properties for the THz detection. Here, an EI-based photodetector is developed for efficient photoelectric conversion in the THz band. High-quality EI material Ta2 NiSe5 is synthesized and the existence of the EI state at room temperature is confirmed. The THz scanning near-field optical microscopy experimentally reveals the strong light-matter interaction in the THz band of EI state in the Ta2 NiSe5 . Benefiting from the strong light-matter interaction, the Ta2 NiSe5 -based photodetectors exhibit superior THz detection performances with a detection sensitivity of ≈42 pW Hz-1/2 and a response time of ≈1.1 µs at 0.1 THz at room temperature. This study provides a new avenue for realizing novel high-performance THz photodetectors by exploiting the emerging EI materials.

Chemical Vapor Deposition of Quaternary 2D BiCuSeO p-Type Semiconductor with Intrinsic Degeneracy.

2D BiCuSeO is an intrinsic p-type degenerate semiconductor due to its self-doping effect, which possesses great potential to fabricate high-performance 2D-2D tunnel field-effect transistors (TFETs). However, the controllable synthesis of multinary 2D materials by chemical vapor deposition (CVD) is still a challenge due to the restriction of thermodynamics. Here, the CVD synthesis of quaternary 2D BiCuSeO nanosheets is realized. As-grown BiCuSeO nanosheets with thickness down to ≈6.1 nm (≈7 layers) and domain size of ≈277 µm show excellent ambient stability. Intrinsic p-type degeneracy of BiCuSeO, capable of maintaining even in a few layers, is comprehensively unveiled. By varying the thicknesses and temperatures, the carrier concentration of BiCuSeO nanosheets can be adjusted in the range of 1019 to 1021 cm-3 , and the Hall mobility of BiCuSeO is ≈191 cm2 V-1 s-1 (at 2 K). Furthermore, taking advantage of the p-type degeneracy of BiCuSeO, a prototypical BiCuSeO/MoS2 TFET is fabricated. The emergence of the negative differential resistance trend and multifunctional diodes by modulating the gate voltage and temperature reveal the great practical implementation potential of BiCuSeO nanosheets. These results pave way for the CVD synthesis of multinary 2D materials and rational design of high-performance tunnel devices.