RESUMO
Three-dimensional (3D) printing is becoming increasingly prevalent in tissue engineering, driving the demand for low-modulus, high-performance, biodegradable, and biocompatible polymers. Extrusion-based direct-write (EDW) 3D printing enables printing and customization of low-modulus materials, ranging from cell-free printing to cell-laden bioinks that closely resemble natural tissue. While EDW holds promise, the requirement for soft materials with excellent printability and shape fidelity postprinting remains unmet. The development of new synthetic materials for 3D printing applications has been relatively slow, and only a small polymer library is available for tissue engineering applications. Furthermore, most of these polymers require high temperature (FDM) or additives and solvents (DLP/SLA) to enable printability. In this study, we present low-modulus 3D printable polyester inks that enable low-temperature printing without the need for solvents or additives. To maintain shape fidelity, we incorporate physical and chemical cross-linkers. These 3D printable polyester inks contain pendant amide groups as the physical cross-linker and coumarin pendant groups as the photochemical cross-linker. Molecular dynamics simulations further confirm the presence of physical interactions between different pendants, including hydrogen bonding and hydrophobic interactions. The combination of the two types of cross-linkers enhances the zero-shear viscosity and hence provides good printability and shape fidelity.
Assuntos
Bioimpressão , Poliésteres , Bioimpressão/métodos , Reologia , Engenharia Tecidual , Impressão Tridimensional , Polímeros , Solventes , Alicerces Teciduais/químicaRESUMO
The main challenge of using nanoliposome systems is controlling their size and stability. In order to overcome this challenge, according to the research conducted at the Research Centre for New Technologies of Biological Engineering, University of Tehran, a model for predicting the size and stability of nanoliposome systems based on thermodynamic relations has been presented. In this model, by using the presented equations and without performing many experiments in the laboratory environment, the effect of temperature, ionic power and different pH can be considered simultaneously whereas examining the components of size, stability and any feature were considered before. Synthesis and application of liposomal nanocarriers in different operating conditions can be investigated and predicted, and due to the change in temperature and pH, the smallest size of th system can be obtained. In this study, we were able to model the synthesis and storage conditions of liposomal nanocarriers at different temperatures and acidic, neutral and alkaline pHs, based on the calculation of mathematical equations. This model also indicates that with increasing temperature, the radius increases but with increasing pH, the radius first increases and then decreases. Therefore, this model can be used to predict size and stability in different operating conditions. In fact, with this modelling method, there is no need to study through laboratory methods and analysis to determine the size, stability and surface loads, and in terms of Accuracy, time and cost savings are affordable.
Assuntos
Lipossomos , Temperatura , Concentração de Íons de Hidrogênio , TermodinâmicaRESUMO
Acinetobacter baumannii is a worldwide health issue in terms of its high antibiotic resistance and ability to form biofilms. Nanoparticles (NPs) with high biocompatibility, high penetrating ability, and low medication dose can successfully treat the antibiotic-resistant infections. In this research, the anti-biofilm activity of niosomes containing minocycline and gallium nitrate (GaN) against A. baumannii biofilm was determined. In order to improve their anti-biofilm properties, minocycline and GaN were encapsulated in niosomes as biocompatible drug carriers. The niosomes' size, zeta potential, shape, stability, drug entrapment efficacy, drug release pattern and antibacterial activity were assessed. Several clinical samples were isolated from the lungs of patients hospitalized at Loghman hospital, Tehran, Iran. The biofilm formation of most lethal clinical isolates of A. baumannii was analyzed. The pneumonia model was generated by intranasally administering A. baumannii suspension to anesthetized mice whose immune systems was compromised twice by cyclophosphamide. Lung infection of the mouse with A. baumannii was confirmed using PCR. After treatment, the lungs were excised under sterile conditions and stained with hematoxylin and eosin (H&E) to determine histological symptoms, inflammation and intercellular secretions. The niosomes contained minocycline and GaN had an average size of 230 nm and a zeta potential of -40 mV, respectively. The percentage of drug entrapment and delayed drug release was both high in niosomal formulations. Niosomes containing minocycline and GaN dispersed 1, 3 and 5 day old biofilms. The mice given the combination of two compounds required less time to be treated than the animals given the single medication (minocycline). The minocycline& GaN-loaded niosomes could be considered as promising candidates to treat the infections caused by A. baumannii biofilm.
Assuntos
Acinetobacter baumannii , Gálio , Pneumonia , Camundongos , Animais , Minociclina/uso terapêutico , Lipossomos/uso terapêutico , Nitratos , Irã (Geográfico) , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Gálio/uso terapêutico , Pneumonia/tratamento farmacológico , Pneumonia/microbiologia , Testes de Sensibilidade MicrobianaRESUMO
Chronic wounds are among the most therapeutically challenging conditions, which are commonly followed by bacterial infection. The ideal approach to treat such injuries are synergistic infection therapy and skin tissue regeneration. In the recent decades, nanotechnology has played a critical role in eradicating bacterial infections by introducing several carriers developed for drug delivery. Moreover, advances in tissue engineering have resulted in new drug delivery systems that can improve the skin regeneration rate and quality. In this study, cefazolin-loaded niosomes were electrosprayed onto chitosan membrane for wound healing applications. For this purpose, niosomes were obtained by the thin-film hydration method; electrospinning was then conducted to fabricate nanofibrous mats. In vitro characterization of the scaffold was performed to evaluate the physicochemical and biological properties. Finally, in vivo studies were carried out to evaluate the potential use of the membrane for skin regeneration. In vitro results indicated the antibacterial properties of the membrane against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) due to the gradual release of cefazolin from niosomes. The scaffolds also showed no cell toxicity. In vivo studies also confirmed the ability of the membrane to enhance skin regeneration by improving re-epithelialization, tissue remodeling, and angiogenesis. The current study could well show the promising role of the prepared scaffold for skin regeneration and bacterial infection elimination.
Assuntos
Quitosana , Nanofibras , Antibacterianos/química , Cefazolina/farmacologia , Quitosana/química , Quitosana/farmacologia , Lipossomos/farmacologia , Nanofibras/química , Pseudomonas aeruginosa , Staphylococcus aureus , CicatrizaçãoRESUMO
An ideal tissue-engineered dermal substitute should possess angiogenesis potential to promote wound healing, antibacterial activity to relieve the bacterial burden on skin, as well as sufficient porosity for air and moisture exchange. In light of this, a glass-ceramic (GC) has been incorporated into chitosan and gelatin electrospun nanofibers (240-360 nm), which MEFs were loaded on it for healing acceleration. The GC was doped with silver to improve the antibacterial activity. The bioactive nanofibrous scaffolds demonstrated antibacterial and superior antibiofilm activities against Gram-negative and Gram-positive bacteria. The nanofibrous scaffolds were biocompatible, hemocompatible, and promoted cell attachment and proliferation. Nanofibrous skin substitutes with or without Ag-doped GC nanoparticles did not induce an inflammatory response and attenuated LPS-induced interleukin-6 release by dendritic cells. The rate of biodegradation of the nanocomposite was similar to the rate of skin regeneration under in vivo conditions. Histopathological evaluation of full-thickness excisional wounds in BALB/c mice treated with mouse embryonic fibroblasts-loaded nanofibrous scaffolds showed enhanced angiogenesis, and collagen synthesis as well as regeneration of the sebaceous glands and hair follicles in vivo.
RESUMO
The ability of biofilm formation in methicillin-resistant Staphylococcus aureus (MRSA) causes significant mortality and morbidity in wound infections. Nanoparticles because of the drug concentration increment at the point of contact of nanoparticles and bacteria, and slower release of the drug at the desired location are considered as proper tools to overcome the therapeutic problem of antimicrobial-resistant infections. This study was aimed to evaluate the anti-biofilm activity of cefazolin-loaded nanoparticles against MRSA isolates. The 27 clinical isolates of MRSA were collected from patients with pressure sores and diabetic ulcers referred to Loghman Hospital in Tehran-Iran. MRSA isolates were detected by polymerase chain reaction (PCR) and biochemical tests. Cefazolin-loaded niosome was synthesized using the thin-film hydration method and were characterized by zeta potential measurement and transmission electron microscopy (TEM). The round-shaped cefazolin-loaded niosomes had a diameter of 100 nm and a -63 mV zeta potential. The cefazolin-containing niosomes removed 1, 3, and 5 d old biofilms at the concentration of 128 µg ml-1, 128 µg ml-1, and 256 µg ml-1, respectively. Histological results indicated that BALB/c mice receiving cefazolin-loaded niosomes were treated effectively faster than those treated by cefazolin or untreated group. In conclusion, the cefazolin-loaded niosome could be considered as a promising candidate for the treatment of biofilm-mediated infections of MRSA.
Assuntos
Biofilmes , Cefazolina/química , Lipossomos/química , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Nanopartículas/química , Cicatrização/efeitos dos fármacos , Animais , Antibacterianos/química , Sobrevivência Celular , Sistemas de Liberação de Medicamentos , Fibroblastos/metabolismo , Humanos , Camundongos , Testes de Sensibilidade Microbiana , Microscopia Eletrônica de Transmissão , Reação em Cadeia da Polimerase , Úlcera por Pressão/microbiologia , Infecções Estafilocócicas/tratamento farmacológico , Staphylococcus aureus/efeitos dos fármacosRESUMO
Nowadays, because of the resistance of bacteria to antibiotics, researchers are trying to make new antibiotics or sometimes even bring them back into the treatment cycle so that they could eliminate the bacteria's resistance. On the other hand, the use of nanofibers has become widespread in many fields for their unique properties and convenient design. The present study focuses on the production of hydrophobic nanofibers to absorb the bacteria and their toxins from the bloodstream that contains the infection. Many bacterial surfaces have hydrophobic surfactant properties due to hydrophobic surface protein. According to the principle of binding two hydrophobic molecules to each other in an aqueous medium, the nanofibers are designed to physically absorb the bacteria. The use of antibiotics in the study can remove some unattached bacteria. In addition, using nanofiber manufacturing techniques can reduce the resistance of bacteria to antibiotics. The construction of the desired membrane can be used in subsequent studies as a replacement membrane for dialysis filters.
Assuntos
Nanofibras , Vancomicina , Durapatita , Humanos , PoliésteresRESUMO
Currently, many corneal diseases are treated by corneal transplantation, artificial corneal implantation or, in severe cases, keratoprosthesis. Owing to the shortage of cornea donors and the risks involved with artificial corneal implants, such as infection transmission, researchers continually seek new approaches for corneal regeneration. Corneal tissue engineering is a promising approach that has attracted much attention from researchers and is focused on regenerative strategies using various biomaterials in combination with different cell types. These constructs should have the ability to mimic the native tissue microenvironment and present suitable optical, mechanical and biological properties. In this article, we review studies that have focused on the current clinical techniques for corneal replacement. We also describe tissue-engineering and cell-based approaches for corneal regeneration.
Assuntos
Doenças da Córnea , Epitélio Corneano , Córnea , Doenças da Córnea/terapia , Humanos , Próteses e Implantes , Regeneração , Engenharia TecidualRESUMO
Dual-pump electrospinning of antibacterial N-decyl-N, N-dimethyl-1-decanaminium-chloride (DDAC)-loaded polycaprolactone (PCL) nanofibers, and chitosan (CS)/polyethylene-oxide (PEO)-based wound dressings with hydrophilic and hydrophobic properties to eliminate and absorb pathogenic bacteria from wound surface besides antibacterial action and to support wound healing and accelerate its process. Physicochemical properties of the prepared nanofibrous mat as well as antibacterial, cytotoxicity, and cell compatibility were studied. The full-thickness excisional wound healing properties up to 3 weeks using hematoxylin and eosin and Masson-trichrome staining were investigated. Addition of DDAC to CS/PEO-PCL mats decreased the diameter of the nanofibers, which is a crucial property for wound healing as large surface area per volume ratio of nanofibers, in addition to proper cell adhesion, increases loading of DDAC in mats and leads to increased cell viability and eliminating Gram-positive bacteria at in vitro studies. In vivo studies showed DDAC-loaded CS/PEO-PCL mats increased epithelialization and angiogenesis and decreased the inflammation according to histological results. We demonstrated that hydrophobic PCL/DDAC mats, besides antibacterial properties of DDAC, absorbed and eliminated the hydrophobic pathological microorganisms, whereas the hydrophilic nanofibers consisted of CS/PEO, increased the cell adhesion and proliferation due to positive charge of CS. Finally, we were able to increase the wound healing quality by using multifunctional wound dressing. CS/PEO-PCL containing 8 wt % of DDAC nanofibrous mats is promising as a wound dressing for wound management due to the favorable interactions between the pathogenic bacteria and PCL/CS-based wound dressing.