RESUMO
We built a high-speed TDS setup with the use of electronically controlled optical sampling (ECOPS), which can measure up to 1600 terahertz pulses per second. The movement of the sample was provided by two fast-speed motorized linear stages constituting the gantry. We developed a flat-bar-based metal marker approach for the synchronization of continuous line-by-line scans. We carefully compared the performance of the terahertz reflection time-domain spectroscopy (TDS) scanner operating in a slow point-by-point and a one-hundred-times faster line-by-line imaging scheme. We analyzed images obtained for both schemes for a uniform metallic breadboard with holes, as well as a glass composite sample with defects. Although the measurement time was reduced by 100 times in terms of the line-by-line scheme, the overall performance in both schemes was almost identical in terms of the defects' sizes, shapes and locations. The results proved that the proposed ECOPS TDS system can provide uniform and extremely fast scanning without any deterioration in image quality.
RESUMO
The redistribution of an incoming radiation into several beams is necessary in telecommunication to demultiplex data signals. In the terahertz spectral range, it can be realized by easy-to-manufacture diffractive optical elements (DOEs) allowing to focus the radiation into multiple focal spots in a single plane. In this article, we present diffractive optical elements focusing THz radiation into three focal spots. Different focal spot distributions (symmetric and asymmetric) are designed using an iterative algorithm. The phase distribution forming asymmetric focal spots can be realized by iterative design, which is a novel approach, to our knowledge. Then, the structures are manufactured using a sintering-based 3D-printing method from polyamide 12 (PA 12) and measured in an experimental setup for 150 GHz frequency. A novel approach based on neural networks (NNs) is proposed to optimize the phase delay maps of the structures to further improve their performance - the higher efficiency and the lower unwanted background noise.
RESUMO
We present the concept, the fabrication processes and the experimental results for materials and optics that can be used for terahertz field-effect transistor detector focal plane arrays. More specifically, we propose 3D printed arrays of a new type - diffractive multi-zone lenses of which the performance is superior to that of previously used mono-zone diffractive or refractive elements and evaluate them with GaN/AlGaN field-effect transistor terahertz detectors. Experiments performed in the 300-GHz atmospheric window show that the lens arrays offer both a good efficiency and good uniformity, and may improve the signal-to-noise ratio of the terahertz field-effect transistor detectors by more than one order of magnitude. In practice, we tested 3 × 12 lens linear arrays with printed circuit board THz detector arrays used in postal security scanners and observed significant signal-to-noise improvements. Our results clearly show that the proposed technology provides a way to produce cost-effective, reproducible, flat optics for large-size field-effect transistor THz-detector focal plane arrays.
RESUMO
A 3D printer was used to realize custom-made diffractive THz lenses. After testing several materials, phase binary lenses with periodic and aperiodic radial profiles were designed and constructed in polyamide material to work at 0.625 THz. The nonconventional focusing properties of such lenses were assessed by computing and measuring their axial point spread function (PSF). Our results demonstrate that inexpensive 3D printed THz diffractive lenses can be reliably used in focusing and imaging THz systems. Diffractive THz lenses with unprecedented features, such as extended depth of focus or bifocalization, have been demonstrated.