Anion-Selective Electrodes Based On a CH-Hydrogen Bonding Bis-macrocyclic Ionophore with a Clamshell Architecture.

CH-hydrogen bonding provides access to new building blocks for making macrocyclic ionophores with high degrees of preorganization and selective anion recognition. In this study, an anion-binding ionophore in the shape of a clamshell (ClS) was employed that is composed of two cyanostar (CNstar) macrocycles with preorganized cavities linked with a 12-carbon chain. This ionophore allows for anion complexation by CH-hydrogen bonding. The potentiometric performance of membrane-based ion-selective electrodes incorporating this ionophore was evaluated. Different membrane compositions were prepared to determine the optimum concentrations of the ionophore and lipophilic additive in the membrane. The optimized electrode had a slope of -58.2 mV/decade and demonstrated an anti-Hofmeister selectivity pattern toward iodide with a nanomolar detection limit. Electrospray ionization mass spectrometry was employed to study the relative association strengths of ClS with various anions. The observed mass peaks of the ion-ionophore complexes were found to be consistent with the potentiometric selectivity pattern of the corresponding electrodes. Overall, the selectivity of the electrode could be altered by using an ionophore in which the two CNstar macrocycles are linked together with a flexible 12-carbon chain to control the molecularity of the binding event.

Design of Pd-Decorated SrTiO3/BiOBr Heterojunction Materials for Enhanced Visible-Light-Based Photocatalytic Reactivity.

The development of photocatalytic materials that exploit visible light is imperative for their sustainable application in environmental remediation. While a variety of approaches have been attempted, facile routes to achieve such structures remain limited. In this contribution, a direct route for the production of a SrTiO3/BiOBr/Pd heterojunction is presented that employs a low temperature, sustainable production method. The materials were produced in a two-step process wherein BiOBr nanoplates are fabricated in the presence of the SrTiO3 nanospheres, generating a highly integrated composite material. Pd nanoparticle surface decoration was subsequently employed to facilitate and enhance charge separation lifetimes to optimize reactivity. The structures were fully characterized via a suite of approaches to confirm the final material composition and arrangement. Their reactivity was explored for the degradation of both colored and colorless model environmental pollutants, where the SrTiO3/BiOBr/Pd demonstrated significant reactivity using visible light, leading to substrate degradation in <10 min in some cases. The enhanced reactivity was attributed to the significant integration between materials, facilitating electron transfer. Such studies provide key information for the development of new materials with optimized visible-light-driven photocatalytic reactivity for sustainable environmental remediation.

Conjugation of Carbon Dots with ß-Galactosidase Enzyme: Surface Chemistry and Use in Biosensing.

Nanoparticles have been conjugated to biological systems for numerous applications such as self-assembly, sensing, imaging, and therapy. Development of more reliable and robust biosensors that exhibit high response rate, increased detection limit, and enhanced useful lifetime is in high demand. We have developed a sensing platform by the conjugation of ß-galactosidase, a crucial enzyme, with lab-synthesized gel-like carbon dots (CDs) which have high luminescence, photostability, and easy surface functionalization. We found that the conjugated enzyme exhibited higher stability towards temperature and pH changes in comparison to the native enzyme. This enriched property of the enzyme was distinctly used to develop a stable, reliable, robust biosensor. The detection limit of the biosensor was found to be 2.9 × 10-4 M, whereas its sensitivity was 0.81 µA·mmol-1·cm-2. Further, we used the Langmuir monolayer technique to understand the surface properties of the conjugated enzyme. It was found that the conjugate was highly stable at the air/subphase interface which additionally reinforces the suitability of the use of the conjugated enzyme for the biosensing applications.

Cyanostar: C-H Hydrogen Bonding Neutral Carrier Scaffold for Anion-Selective Sensors.

Cyanostar, a pentagonal macrocyclic compound with an electropositive cavity, binds anions with CH-based hydrogen bonding. The large size of the cyanostar's cavity along with its planarity favor formation of 2:1 sandwich complexes with larger anions, like perchlorate, ClO4-, relative to the smaller chloride. We also show that cyanostar is selective for ClO4- over the bulky salicylate anions by using NMR titration studies to measure affinity. The performance of this novel macrocycle as an anion ionophore in membrane ion sensors was evaluated. The cyanostar-based electrodes demonstrated a Nernstian response toward perchlorate with selectivity patterns distinctly different from the normal Hofmeister series. Different membrane compositions were explored to identify the optimum concentrations of the ionophore, plasticizer, and lipophilic additive that give rise to the best perchlorate selectivity. Changing the concentration of the lipophilic additive tridodecylmethylammonium chloride was found to impact the selectivity pattern and the analytical dynamic range of the electrodes. The high selectivity of the cyanostar sensors and their detection limit could enable the determination of ClO4- in contaminated environmental samples. This novel class of macrocycle provides a suitable scaffold for designing various anion-selective ionophores by altering the size of the central cavity and its functionalization.

Correlating the potentiometric selectivity of cyclosporin-based electrodes with binding patterns obtained from electrospray ionization-mass spectrometry.

Electrospray ionization mass spectrometry ESI-MS is a powerful technique for the characterization of macromolecules and their noncovalent binding with guest ions. We herein evaluate the feasibility of using ESI-MS as a screening tool for predicting potentiometric selectivities of ionophores. Ion-selective electrodes based on the cyclic peptide, cyclosporin A, were developed, and their potentiometric selectivity pattern was evaluated. Optimized electrodes demonstrated near-Nernstian slopes with micromolar detection limits toward calcium. ESI-MS and ESI-MS/MS were employed to determine the relative association strengths of cyclosporin A with various cations. The observed MS intensities of ion-ionophore complexes correlate favorably with the potentiometric selectivity pattern that was demonstrated by cyclosporin-based electrodes. This correlation was found to hold true for other established ionophores, such as valinomycin and benzo-18-crown-6. Taken together, these experiments demonstrate that mass spectrometry could be used to predict the selectivity patterns of new ionophores for potentiometric and optical ion sensors. Further, this approach could be useful in screening mixtures or libraries of newly-synthesized compounds to identify selective ionophores.

Light-activated tandem catalysis driven by multicomponent nanomaterials.

Transitioning energy-intensive and environmentally intensive processes toward sustainable conditions is necessary in light of the current global condition. To this end, photocatalytic processes represent new approaches for H2 generation; however, their application toward tandem catalytic reactivity remains challenging. Here, we demonstrate that metal oxide materials decorated with noble metal nanoparticles advance visible light photocatalytic activity toward new reactions not typically driven by light. For this, Pd nanoparticles were deposited onto Cu2O cubes to generate a composite structure. Once characterized, their hydrodehalogenation activity was studied via the reductive dechlorination of polychlorinated biphenyls. To this end, tandem catalytic reactivity was observed with H2 generation via H2O reduction at the Cu2O surface, followed by dehalogenation at the Pd using the in situ generated H2. Such results present methods to achieve sustainable catalytic technologies by advancing photocatalytic approaches toward new reaction systems.

Polymeric plasticizer extends the lifetime of PVC-membrane ion-selective electrodes.

The nature of the plasticizer plays a pivotal role in the analytical performance of polymer membrane ion sensors. Conventional plasticizers suffer leaching or migration from the membrane and exudation, both of which could limit the lifetime of sensors based on plasticized membranes. Herein, we describe the use of polyester sebacate (PES), a model polymeric plasticizer, in the preparation of poly (vinyl chloride) (PVC) membrane ion-selective electrodes (ISEs) using valinomycin as ionophore. PVC membrane electrodes plasticized with polyester sebacate demonstrated potentiometric response characteristics that compared favorably to ones plasticized with the conventional and similarly structured plasticizer bis(2-ethylhexyl) sebacate (DOS). Increasing the content of polyester sebacate in the membrane enhanced the response and improved the selectivity of valinomycin-based ISEs toward potassium over sodium. Various methods, including electrochemical impedance spectroscopy, UV-vis spectroscopy, dark field optical microscopy, and potentiometry were employed to study the effect of plasticizer on the leaching of the membrane components and the lifetime of both DOS- and PES-plasticized membranes. PES-plasticized electrodes maintained Nernstian response and high selectivity for more than four months, an improvement over DOS-plasticized membrane electrodes. This was attributed to enhanced retention of the membrane components because of the high polymeric nature of the polyester sebacate. These characteristics suggest that polyester sebacate is a good candidate to replace the conventional plasticizers in preparing PVC membrane electrodes with longer lifetime.

Pd@Bi2Ru2O7/BiVO4 Z-Scheme Heterojunction Nanocomposite Photocatalyst for the Degradation of Trichloroethylene.

Photocatalytic degradation of chlorinated persistent organic pollutants is a very challenging process due to the high redox potential of the C-Cl bond that requires wide band gap catalysts that are activated under UV light. Designing a Z-scheme heterojunction between visible light-activated metal oxides with compatible band gaps enables these redox potentials. Herein, we report the design of a pyrochlore/Aurivillius Z-scheme heterojunction to enhance the photocatalytic activity of BiVO4 for the degradation of trichloroethylene. We prepared Bi2Ru2O7/BiVO4 heterostructured photocatalysts by a controlled hydrothermal approach. Upon optimizing the Bi2Ru2O7 ratio to 1.0 wt %, the heterostructured photocatalyst demonstrated enhanced activity in the degradation of trichloroethylene (TCE) under simulated sunlight irradiation compared to bare BiVO4 and Bi2Ru2O7, respectively. Decorating the surface of the catalyst with palladium nanodomains to create the Pd@Bi2Ru2O7/BiVO4 nanocomposite showed a substantial increase in the photocatalytic degradation of TCE. The material characterization indicated that the architecture of the material provides a synergy of enhancing the redox potential of the photocatalyst and improving the charge carrier dynamics. Furthermore, the photoelectrochemical characterization confirmed that the dual heterojunctions in the Pd@Bi2Ru2O7/BiVO4 nanocomposite resulted in improved interfacial charge carrier transfer and enhanced the electron/hole separation efficiency compared to the nonpalladized catalysts. This work provides a promising approach for band gap engineering of visible light photocatalysts for the degradation of halogenated persistent organic pollutants.

Palladium nanoparticle-decorated iron nanotubes hosted in a polycarbonate porous membrane: development, characterization, and performance as electrocatalysts of ascorbic acid.

One-dimensional iron metallic nanotubes were prepared by electroless deposition within the pores of polycarbonate (PC) membranes. The longitudinal nucleation of the nanotubes along the pore walls was achieved by mounting the PC membrane between two halves of a U-shaped reaction tube. Palladium nanoparticles were post-deposited on the inner wall of the nanotubes. The composition, morphology, and structure of the Pd/Fe nanotubes were characterized by transmission electron microscopy, scanning electron microscopy, and inductively coupled plasma-atomic emission spectroscopy. A glassy carbon (GC) electrode modified with the free Pd/Fe bimetallic nanotubes (isolated after the dissolution of the host membranes) showed small improvement on the overpotential oxidation of ascorbic acid in comparison to the bare GC electrode. Alternatively, the Pd/Fe-polycarbonate membrane was covered with a sputtered gold thin layer of 10 nm from one side and mounted in a homemade electrochemical cell acting as the working electrode. The potential use of these functional membranes as catalytic surfaces for the electrochemical monitoring of ascorbic acid was investigated by cyclic voltammetry and amperometry. In the presence of a phosphate buffer solution, pH 7, Pd/Fe-polycarbonate membranes showed excellent electrocatalytic properties toward the oxidation of ascorbic acid even at potentials as low as 0 mV versus a Ag/AgCl reference electrode. In addition to the substantial lower overpotential, these electrodes offered selectivity over acetaminophen and uric acid, and a prolonged working stability without the need for maintenance. The electrodes were kept dry between different working days and retained their original activity for more than 1 week. Pd-polycarbonate and Fe-polycarbonate membranes were also developed for comparison purposes.

Reagentless electrochemical biosensors through incorporation of unnatural amino acids on the protein structure.

Typical protein biosensors employ chemical or genetic labeling of the protein, thus introducing an extraneous molecule to the wild-type parent protein, often changing the overall structure and properties of the protein. While these labeling methods have proven successful in many cases, they also have a series of disadvantages associated with their preparation and function. An alternative route for labeling proteins is the incorporation of unnatural amino acid (UAA) analogues, capable of acting as a label, into the structure of a protein. Such an approach, while changing the local microenvironment, poses less of a burden on the overall structure of the protein. L-DOPA is an analog of phenylalanine and contains a catechol moiety that participates in a quasi-reversible, two-electron redox process, thus making it suitable as an electrochemical label/reporter. The periplasmic glucose/galactose binding protein (GBP) was chosen to demonstrate this detection principle. Upon glucose binding, GBP undergoes a significant conformational change that is manifested as a change in the electrochemistry of L-DOPA. The electroactive GBP was immobilized onto gold nanoparticle-modified, polymerized caffeic acid, screen-printed carbon electrodes (GBP-LDOPA/AuNP/PCA/SPCE) for the purpose of direct measurement of glucose levels and serves as a proof-of-concept of the use of electrochemically-active unnatural amino acids as the label. The resulting reagentless GBP biosensors exhibited a highly selective and sensitive binding affinity for glucose in the micromolar range, laying the foundation for a new biosensing methodology based on global incorporation of an electroactive amino acid into the protein's primary sequence for highly selective electrochemical detection of compounds of interest.

Ion-selective electrodes based on a pyridyl-containing triazolophane: altering halide selectivity by combining dipole-promoted cooperativity with hydrogen bonding.

Triazolophanes are ionophores, with preorganized cyclic cavities that have tunable selectivities for halides. The interaction with halides is based on hydrogen bonding between the eight CH hydrogen atoms of the cavity and the halide anion. The rigidity of the cavity in tetraphenylene triazolophane along with the hydrogen bonding favors planar 1:1 complexation of "snugly" encapsulated chloride and bromide. Manipulating the triazolophane's structure by introducing two pyridyl moieties into the cavity alters the receptor's binding mode. This change adds a dipole-promoted driving force that combines with hydrogen bonding to favor the formation of 2:1 sandwich complexes around halides. The potentiometric response of electrodes based on this new ionophore was evaluated for optimal halide selectivity. The new triazolophane-based electrode showed an anti-Hofmeister selectivity toward iodide with a submicromolar detection limit. The stoichiometry of complexation and the stability constants with different halides were evaluated using a segmented sandwich membranes method. The pyridyl-triazolophane demonstrated a response consistent with a 2:1 sandwich-type complex with iodide, in polyvinyl chloride (PVC) membranes.

Persistence of aerially-sprayed naled in coastal sediments.

Aerial sprays of the organophosphate pesticide, naled, were intensified over beach areas during the summer of 2016 to control the locally-acquired Zika outbreak in the continental U.S. Concerns were raised in beach frequented areas about contaminated sediments. The aim of this study was to evaluate the persistence and levels of naled and its byproduct, dichlorvos, in sediments obtained from the affected areas. Laboratory experiments were designed to simulate the effect of various natural conditions on the decomposition of naled in three sediment types (beach sand, marl, and calcinated beach sand). The three sediment samples were also exposed to field aerial sprays. After 30 min of exposure, more dichlorvos was detected in the sediments than naled, with 33 to 43% of the molar concentration initially applied as either naled or dichlorvos. Under dark conditions, trace levels of naled were observed after 24 h on sediments. Higher temperature accelerated the natural decomposition of both naled and dichlorvos in sediments. The half-life of naled ranged from 3 to 5 h at 22.5 °C and ranged from 1 to 3 h at 30 °C. Expedited decomposition of naled was observed under sunlight conditions with a half-life of naled of 20 min. In the field, only dichlorvos was detected in the sediment samples at concentrations between 0.0011 and 0.0028 µmol/g 1 h after aerial sprays. This data can be used towards a risk assessment that evaluates exposures to naled and dichlorvos through beach sands impacted by aerial spray activities.

Can temperature be used to tune the selectivity of membrane ion-selective electrodes?

The selectivity coefficients, KIJpot, of ion-selective electrodes (ISEs) have been fundamentally related to thermodynamic parameters, but yet, the effect of temperature on KIJpot has not been studied. We describe a new approach to fine-tune the selectivity of ISEs based on the effect of temperature on selectivity coefficients. This effect was quantified for ion exchangers as well as neutral carrier ionophores. Potassium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate was used as an ion exchanger in a poly(vinyl chloride) membrane. The corresponding electrode showed an inverse relationship between log KNa+,K+pot and temperature. Additionally, sodium-selective electrodes using monensin, monensin methyl ester (MME), and monensin decyl ester (MDE) were evaluated as models of electrodes based on neutral carriers. The electrode based on monensin showed an enhancement in the selectivity for sodium over potassium by half an order of magnitude as the temperature increased from 20 to 50 degrees C, while the electrodes based on MME or MDE showed a very small change in selectivity. This can be explained in light of changes in the formation constants between the ions and ionophores with temperature. The theory of the effect of temperature on selectivity for both ion exchangers and neutral carrier ionophores is also discussed.

Triazolophanes: a new class of halide-selective ionophores for potentiometric sensors.

Triazolophanes, cyclic compounds containing 1,2,3-triazole units, are a new class of host molecules that demonstrate strong interactions with halides. These molecules are designed with a preorganized cavity that interacts through hydrogen bonding with spherical anions, such as chloride and bromide. We have explored the use of one such triazolophane as a halide-selective ionophore in poly(vinyl chloride) (PVC) membrane electrodes. Different membrane compositions were evaluated to identify concentrations of the ionophore, plasticizer, and lipophilic additive that give rise to the best chloride and bromide selectivity. The lipophilicity of the plasticizer was found to have a great impact on the electrode response. Additionally, the concentration of the lipophilic additive was found to be critical for optimal response. The utility of a triazolophane-based electrode was demonstrated by quantification of bromide in horse serum samples.

Persistence of aerially applied mosquito-pesticide, Naled, in fresh and marine waters.

Naled, an organophosphate pesticide, received considerable attention during 2016 as it was applied aerially to control the first mosquito-borne Zika virus outbreak in the continental United States. Stakeholders living in affected areas raised concerns about its environmental impacts. One factor influencing environmental impacts is the persistence of the chemical applied. The objective of this study was to evaluate the persistence of naled - and its degradation bi-product, dichlorvos - in natural waters. Initial naled concentrations were measured at ground level after full-scale aerial spray activities. Laboratory experiments were designed to evaluate factors (fresh versus marine water chemistry, temperature, and sunlight) that may promote the degradation of naled and dichlorvos in the environment. Results show that natural fresh and marine water chemistry promoted naled degradation as experiments with de-ionized water resulted in half-lives greater than 6 days. The half-life in natural waters without light ranged from 5 to 20 h with lower half lives at higher temperatures. Under light exposure, degradation was accelerated and yielded more dichlorvos. Detectable levels (0.05 µM for naled and 0.10 µM for dichlorvos) were measured in water samples collected from the field during aerial spray events. Results can be used in risk assessments that consider both naled and dichlorvos to better understand ecological impacts and to develop improved public health recommendations.

Miniaturization overcomes macro sample analysis limitations: Salicylate-selective polystyrene nanoparticle-modified optical sensor.

Salicylate-selective polystyrene micro-optode is engineered using a mixed solvent method. The size of the particles (200-400 nm) and the distribution of the recognition components onto their surface were elucidated by transmission electron microscope and confocal fluorescence microscope. The polystyrene micro/nanoparticles are modified with thiourea derivative as ionophore, ETH 7075 as chromoionophore, and tridodecylmethyl ammonium chloride (TDMAC) as ion-exchanger. The response mechanism depends on the selective binding of the ionophore at the surface of the particles to salicylate. A concomitant protonation of the chromoionophore results in a decrease in the absorbance at the maximum wavelength, 535 nm. Enabling this sensing interaction at the micro-scale decreases the response time of the optode to be lower than 10 s the concentration range of 3-70 µM, with a detection limit of 2.1 µM. This microsphere sensing platform demonstrated excellent performance in the determination of salicylate in spiked urine samples and in pharmaceutical formulations. Further miniaturization of these micro-optodes promises in-vivo analysis of intracellular analytes.

Size-Dependent Photocatalytic Activity of Carbon Dots with Surface-State Determined Photoluminescence.

Carbon dots (CDs) were synthesized by a microwave-mediated method and separated by size exclusion chromatography into three different size fractions. There was no correlation of the size with photoluminescence (PL) emission wavelength, which shows that the PL mechanism is not quantum-size dependent. UV/vis absorption and diffuse reflectance spectroscopies showed that the light absorption properties as well as the band gap of the CDs changed with the size of the particle. The combination of FTIR and XPS measurements revealed the composition on the surface of each fraction. The three CDs fractions were separately used in the photocatalytic degradation of organic dyes under simulated sunlight irradiation. The catalytic activity of the as-prepared CDs was found to increase as the size of the particles decreased. Complete degradation of both rhodamine B (RhB) and methylene blue (MB) was achieved in 150 min by the 2-nm CDs. The scavenger studies showed that the holes and superoxide radicals are the main species involved in the photocatalytic degradation of the dye by the 2-nm CDs. These CDs displayed high stability in the degradation of organic dyes for multiple cycles. The 2-nm CDs displayed promising photocatalytic degradation of p-nitrophenol (PNP) . These results demonstrate for the first time the application of bare carbon dots in the degradation of environmental contaminants.

Converting Light Energy to Chemical Energy: A New Catalytic Approach for Sustainable Environmental Remediation.

We report a synthetic approach to form cubic Cu2O/Pd composite structures and demonstrate their use as photocatalytic materials for tandem catalysis. Pd nanoparticles were deposited onto Cu2O cubes, and their tandem catalytic reactivity was studied via the reductive dehalogenation of polychlorinated biphenyls. The Pd content of the materials was gradually increased to examine its influence on particle morphology and catalytic performance. Materials were prepared at different Pd amounts and demonstrated a range of tandem catalytic reactivity. H2 was generated via photocatalytic proton reduction initiated by Cu2O, followed by Pd-catalyzed dehalogenation using in situ generated H2. The results indicate that material morphology and composition and substrate steric effects play important roles in controlling the overall reaction rate. Additionally, analysis of the postreacted materials revealed that a small number of the cubes had become hollow during the photodechlorination reaction. Such findings offer important insights regarding photocatalytic active sites and mechanisms, providing a pathway toward converting light-based energy to chemical energy for sustainable catalytic reactions not typically driven via light.

Direct Synthetic Control over the Size, Composition, and Photocatalytic Activity of Octahedral Copper Oxide Materials: Correlation Between Surface Structure and Catalytic Functionality.

We report a synthetic approach to form octahedral Cu2O microcrystals with a tunable edge length and demonstrate their use as catalysts for the photodegradation of aromatic organic compounds. In this particular study, the effects of the Cu(2+) and reductant concentrations and stoichiometric ratios were carefully examined to identify their roles in controlling the final material composition and size under sustainable reaction conditions. Varying the ratio and concentrations of Cu(2+) and reductant added during the synthesis determined the final morphology and composition of the structures. Octahedral particles were prepared at selected Cu(2+):glucose ratios that demonstrated a range of photocatalytic reactivity. The results indicate that material composition, surface area, and substrate charge effects play important roles in controlling the overall reaction rate. In addition, analysis of the post-reacted materials revealed photocorrosion was inhibited and that surface etching had preferentially occurred at the particle edges during the reaction, suggesting that the reaction predominately occurred at these interfaces. Such results advance the understanding of how size and composition affect the surface interface and catalytic functionality of materials.

Reactivity of Pd/Fe bimetallic nanotubes in dechlorination of coplanar polychlorinated biphenyls.

A new class of bimetallic materials based on palladium-decorated iron nanotubes is described that demonstrates high reactivity in dechlorination reactions. This high dechlorination efficiency was attributed to the high surface area to volume ratio of the hollow nanotubes structure. Herein, we evaluated the effect of different conditions, such as the nanotube size, and the palladium loading on the efficiency of the dechlorination of PCB 77, a model coplanar polychlorinated biphenyl (PCB), by the Pd/Fe bimetallic nanotubes system. The efficiency of the dechlorination was lowered by decreasing the tube diameter from 200 to 100 nm. In addition, the interior surface as well as the exterior surface of the as-synthesized Pd/Fe bimetallic nanotubes was found to contribute to the high efficiency of the dechlorination of PCB 77. The dechlorination of PCB 77 by Pd/Fe bimetallic nanotubes demonstrated small activation energy indicating diffusion controlled reaction. The as-prepared Pd/Fe bimetallic nanotubes showed extended lifetime activity when used in multiple dechlorination cycles.