Self-Templating Copolymerization to Produce Robust Conductive Nanocoatings Based on Conjugated Polymer Brushes with Implementable Memristive Characteristics.

An effective synthesis of conductive polymer brushes, i.e., self-templating surface-initiated copolymerization (ST-SICP), is developed. It proceeds through copolymerization of pendant thiophene groups in the precursor multimonomer poly(3-methylthienyl methacrylate) (PMTM) brushes with free 3-methylthiophene (3MT) monomers leading to PMTM-co-P3MT brushes. This approach leads to improved conformational freedom of generated conjugated poly(thiophene)-based chains and their higher share in the brushes with respect to conjugation of pendant thiophene groups only. As a result, best performing conjugated PMTM-co-P3MT brushes demonstrate high ohmic conductivity in both out-of-plane and in-plane direction. Furthermore, thanks to the covalent anchoring as well as intra- and intermolecular connections, highly stable and mechanically robust nanocoatings are produced which can survive mechanical cleaning and long-term storage under ambient conditions. Grafting of ionic poly(sodium 4-styrenesulfonate) (PSSNa) in between PMTM-co-P3MT chains brings new properties to such binary mixed brushes that can operate as thin-film memristive coating with switchable conductance. It is worth mentioning that the crucial synthetic steps, i.e., grafting of precursor PMTM brushes by surface-initiated organocatalyzed atom transfer radical polymerization (SI-O-ATRP) and PSSNa chains by surface-initiated photoiniferter-mediated polymerization (SI-PIMP) are conducted under ambient conditions using only microliter volumes of reagents providing methodology that can be considered for use beyond the laboratory scale.

Spontaneous Fusion of Core-Shell Nanocapsules with Oil Cores and Oppositely Charged Polysaccharide Shells.

Polymer nanocapsules with hydrophobic cores are promising candidates for nanoreactors to carry out (bio)chemical reactions mimicking the performance of natural cellular systems. Their architecture allows reagents to be encapsulated in the cores enabling reactions to proceed in confined environments in a controlled, and efficient manner. Polysaccharide-shell oil-core nanocapsules are proposed here as facile mergeable nanoreactors. Spontaneous fusion of oppositely charged polysaccharide capsules is demonstrated for the first time. Such capsules are formed and easily loaded with reagents by nanoemulsification of an aqueous solution of hydrophobically modified polysaccharides (chitosan, hyaluronate) and oleic acid with dissolved desired hydrophobic compounds. Efficient fusion of the formed nanocapsules dispersed in an aqueous medium at optimized conditions (pH, ionic strength) is followed using fluorescence microscopy by labeling both their cores and shells with fluorescent dyes. As a proof of concept, a model fluorogenic synthesis is also realized by fusing the capsules containing separated reagents and the catalyst. The nanocapsules and fusion process developed here establish a platform for realization of versatile reactions in a confined environment including model studies on biologically relevant processes taking place in natural systems.

Synthesis, Processing and Applications of Conjugated Oligomers and Polymers 2.0.

In the past few decades, conjugated organic oligomers and polymers have been shown to have amazing properties, such as conductivity, which were traditionally considered counterintuitive for macromolecules consistently used as plastics and fibers (and thus, insulators) until the late 1970s [...].

Tailoring Properties of Hyaluronate-Based Core-Shell Nanocapsules with Encapsulation of Mixtures of Edible Oils.

Dispersions of core-shell nanocapsules (nanoemulsion) composed of liquid oil cores and polysaccharide-based shells were fabricated with emulsification using various mixtures of edible oils and amphiphilic hyaluronate derivatized with 12-carbon alkyl chains forming the shells. Such nanocapsules, with typical diameters in the 100-500 nm range, have been previously shown as promising carriers of lipophilic bioactive compounds. Here, the influence of some properties of the oil cores on the size and stability of the capsules were systematically investigated using oil binary mixtures. The results indicated that, in general, the lower the density, viscosity, and interfacial tension (IFT) between the oil and aqueous polymer solution phases, the smaller the size of the capsules. Importantly, an unexpected synergistic reduction of IFT of mixed oils was observed leading to the values below the measured for individual oils. Such a behavior may be used to tailor size but also other properties of the nanocapsules (e.g., stability, solubility of encapsulated compounds) that could not be achieved applying just a single oil. It is in high demand for applications in pharmaceutical or food industries and opens opportunities of using more complex combinations of oils with more components to achieve an even further reduction of IFT leading to even smaller nanocapsules.

Precise Stepwise Synthesis of Donor-Acceptor Conjugated Polymer Brushes Grafted from Surfaces.

Donor-acceptor (D-A) conjugated polymers are promising materials in optoelectronic applications, especially those forming ordered thin films. The processability of such conjugated macromolecules is typically enhanced by introducing bulky side chains, but it may affect their ordering and/or photophysical properties of the films. We show here the synthesis of surface-grafted D-A polymer brushes using alternating attachment of tailored monomers serving as electron donors (D) and acceptors (A) via coupling reactions. In such a stepwise procedure, alternating copolymer brushes consisting of thiophene and benzothiadiazole-based moieties with precisely tailored thickness and no bulky substituents were formed. The utilization of Sonogashira coupling was shown to produce densely packed molecular wires of tailored thickness, while Stille coupling and Huisgen cycloaddition were less efficient, likely because of the higher flexibility of D-A bridging groups. The D-A brushes exhibit reduced bandgaps, semiconducting properties and can form aggregates, which can be adjusted by changing the grafting density of the chains.

Ladder-like Polymer Brushes Containing Conjugated Poly(Propylenedioxythiophene) Chains.

The high stability and conductivity of 3,4-disubstituted polythiophenes such as poly(3,4-ethylenedioxythiophene) (PEDOT) make them attractive candidates for commercial applications. However, next-generation nanoelectronic devices require novel macromolecular strategies for the precise synthesis of advanced polymer structures as well as their arrangement. In this report, we present a synthetic route to make ladder-like polymer brushes with poly(3,4-propylenedioxythiophene) (PProDOT)-conjugated chains. The brushes were prepared via a self-templating surface-initiated technique (ST-SIP) that combines the surface-initiated atom transfer radical polymerization (SI-ATRP) of bifunctional ProDOT-based monomers and subsequent oxidative polymerization of the pendant ProDOT groups in the parent brushes. The brushes prepared in this way were characterized by grazing-angle FTIR, XPS spectroscopy, and AFM. Steady-state and time-resolved photoluminescence measurements were used to extract the information about the structure and effective conjugation length of PProDOT-based chains. Stability tests performed in ambient conditions and under exposure to standardized solar light revealed the remarkable stability of the obtained materials.

Exfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures.

Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.

Real-time co-site optical microscopy study on the morphological changes of the dentine's surface after citric acid and sodium hypochlorite: a single-tooth model.

BACKGROUND: To this day, the effects of sodium hypochlorite and chelating agents on the smear layer and on the dentine's surface, remain not fully examined. The study is aimed to analyze the dentine's surface treated with 40% citric acid and 5.25% sodium hypochlorite according to two irrigation protocols. MATERIALS AND METHODS: The study employed a computer-controlled Nikon Eclipse LV100 optical microscope. Ten roots split longitudinally with canals prepared mechanically using the MTwo system to a size of 40/04 were observed. The root halves were divided into two study groups, one half in each of the groups. According to two irrigation protocols, the dentine's surface was irrigated with 40% citric acid and 5.25% sodium hypochlorite, separated with water. Dentine surface was observed in a fixed place and photographed in 500 × magnification after each irrigation stage. The obtained images were then analyzed using computer software (NIS-Elements AR, GIMP-2.6, ImageJ 1.45s). RESULTS: Various speed of removal of the smear layer and varied morphological changes of the dentine's surface were observed in both examined groups. Double irrigation of the dentine with citric acid for 30 s resulted in complete removal of the smear layer, and double irrigation for 60 s resulted in increased mean diameter of the dentine tubules (degradation of the dentine's surface). CONCLUSIONS: Double alternating irrigation with citric acid and sodium hypochlorite for 30 s yielded satisfactory results, while double irrigation for 60 s resulted in increased mean diameter of the dentine tubules. A real time assessment of the dentine's surface changes after both tested solutions can improve understanding of the phenomena that occur during the irrigation and as a result it might help to improve clinical outcomes in root canal treatment.

Coacervate Thermoresponsive Polysaccharide Nanoparticles as Delivery System for Piroxicam.

Low water solubility frequently compromises the therapeutic efficacy of drugs and other biologically active molecules. Here, we report on coacervate polysaccharide nanoparticles (CPNs) that can transport and release a model hydrophobic drug, piroxicam, to the cells in response to changes in temperature. The proposed, temperature-responsive drug delivery system is based on ionic derivatives of natural polysaccharides-curdlan and hydroxypropyl cellulose. Curdlan was modified with trimethylammonium groups, while the anionic derivative of hydroxypropyl cellulose was obtained by the introduction of styrenesulfonate groups. Thermally responsive nanoparticles of spherical shape and average hydrodynamic diameter in the range of 250-300 nm were spontaneously formed in water from the obtained ionic polysaccharides as a result of the coacervation process. Their morphology was visualized using SEM and AFM. The size and the surface charge of the obtained objects could be tailored by adjusting the polycation/polyanion ratio. Piroxicam (PIX) was effectively entrapped inside the nanoparticles. The release profile of the drug from the CPNs-PIX was found to be temperature-dependent in the range relevant for biomedical applications.

Direct analysis from dried blood spot card surfaces with direct probe mass spectrometry - Evaluation study.

RATIONALE: The Direct Probe Mass Spectrometry (DIPMS) method allows successful analysis of powders, solid and liquid samples. The potential of direct surface analysis could find further application in the examination of surfaces with good absorption properties such as Dried Blood Spot (DBS) cards that constitute a great alternative to the classical blood collection method directly from veins. METHODS: DIPMS was performed with the ionization carried out under atmospheric pressure in an Atmospheric Pressure Chemical Ionization source. Direct analysis of diazepam solutions in methanol and after their deposition onto a DBS card was conducted. Subsequently, images of the DBS cards with and without blood samples were acquired using Scanning Electron Microscopy (SEM). RESULTS: Direct quantitative analysis of diazepam liquid samples by DIPMS was successfully performed. Linear correlation between the concentration of diazepam and the peak intensity with a R2 coefficient of 0.937 was obtained. However, the method failed when the analysis was conducted directly from the surface of the DBS cards and no diazepam peak was observed in the mass spectrum. The SEM images confirmed the good absorption properties of DBS cards and the absence of blood components on the surface. CONCLUSIONS: DIPMS is an excellent technique for the rapid, direct analysis of powders, solid and liquid samples; however, the potential of the method is limited when samples are deposited on surfaces with good absorption properties such as DBS cards.

Gradient of zinc content in core-shell zinc ferrite nanoparticles - precise study on composition and magnetic properties.

A broad spectrum of applications of magnetic nanoparticles leads to the need for the precise tuning of their magnetic properties. In this study, a series of magnetite and zinc-ferrite nanoparticles were successfully prepared by modified high-temperature synthesis in a controlled gas atmosphere. Nanoparticles with different zinc to iron ratios and pure Fe3O4 were obtained. The structure of the nanoparticles was studied by transmission electron microscopy and Mössbauer spectroscopy. These revealed the single domain character of the nanoparticles and the influence of the synthesis temperature and zinc to iron ratio on their shape and size. Chemical structure was characterized by inductively coupled plasma optical emission spectroscopy, energy dispersive X-ray spectroscopy and thermogravimetric analysis. X-ray photoelectron spectroscopy coupled with an argon gas cluster ion beam (Ar-GCIB) allowed the study of subsequent layers of the nanoparticles without altering their chemical structure. This revealed the presence of a carbon layer on all nanoparticles consisting of capping agents used in the synthesis and revealed the core-shell character of the zinc ferrite particles. In addition, different types of zinc infusions in the nanoparticle structure were observed when using different Zn/Fe ratios. Finally, magnetic studies performed by means of vibrating sample magnetometry proved the superparamagnetic behavior of all the samples.

Label-Free Infrared Spectroscopy and Imaging of Single Phospholipid Bilayers with Nanoscale Resolution.

Mid-infrared absorption spectroscopy has been used extensively to study the molecular properties of cell membranes and model systems. Most of these studies have been carried out on macroscopic samples or on samples a few micrometers in size, due to constraints on sensitivity and spatial resolution with conventional instruments that rely on far-field optics. Properties of membranes on the scale of nanometers, such as in-plane heterogeneity, have to date eluded investigation by this technique. In the present work, we demonstrate the capability to study single bilayers of phospholipids with near-field mid-infrared spectroscopy and imaging and achieve a spatial resolution of at least 40 nm, corresponding to a sample size of the order of a thousand molecules. The quality of the data and the observed spectral features are consistent with those reported from measurements of macroscopic samples and allow detailed analysis of molecular properties, including orientation and ordering of phospholipids. The work opens the way to the nanoscale characterization of the biological membranes for which phospholipid bilayers serve as a model.

Uptake and bioreactivity of charged chitosan-coated superparamagnetic nanoparticles as promising contrast agents for magnetic resonance imaging.

Bioreactivity of superparamagnetic iron oxide nanoparticles (SPION) coated with thin layers of either cationic or anionic chitosan derivatives and serving as contrast agents in magnetic resonance imaging (MRI) was studied in vivo using BALB/c mouse model. Synthesized dual-modal fluorescing SPION were tracked in time using both fluorescent imaging and MRI. Although SPION started to be excreted by kidneys relatively shortly after administration they were uptaken by liver enhancing MRI contrast even up to 7 days. Importantly, chitosan-coated SPION caused only mild activation of acute phase response not affecting biochemical parameters of blood. Liver histology indicated the presence of SPION and modest increase in the number of Kupffer cells. The overall results indicated that SPION coated with ultrathin layers of chitosan ionic derivatives can serve as T2 contrast agents for diagnosis of liver diseases or imaging of other organs assuming the dose is optimized according to the need.

Photoactive Surface-Grafted Polymer Brushes with Phthalocyanine Bridging Groups as an Advanced Architecture for Light-Harvesting.

Surface-grafted polymer brushes of novel ladder-like architecture were proposed for inducing ordering of chromophores embedded therein. The brushes with acetylene side groups were obtained by surface-initiated photoiniferter-mediated polymerization. The acetylene moieties reacted then through a "click" process with an axially azide-bifunctionalized silicon phthalocyanine bridging the neighboring chains that inherently adopt extended conformations in dense brushes. FTIR, quartz crystal microbalance, and atomic force microscopy were used to study formation and structure of the photoactive brushes varying in grafting densities. Importantly, photophysical properties of the chromophores were virtually unaffected upon embedding them into the brushes, as evidenced by UV/Vis absorption and emission spectroscopy. Owing to the unique ordering of the chromophores, the proposed method may open new opportunities for the fabrication of light-harvesting systems suitable for photovoltaic or sensing applications.

Polyelectrolyte multilayers with perfluorinated phthalocyanine selectively entrapped inside the perfluorinated nanocompartments.

A novel perfluorinated magnesium phthalocyanine (MgPcF64) was synthesized and employed to probe nanodomains in hydrophobically modified, amphiphilic cationic polyelectrolytes bearing alkyl and/or fluoroalkyl side chains. MgPcF64 was found to be solubilized exclusively in the aqueous solutions of the fluorocarbon modified polycations, occupying the perfluorinated nanocompartments provided, while analogous polyelectrolytes with alkyl side chains forming hydrocarbon nanocompartments could not host the MgPcF64 dye. Multilayer films were fabricated by means of the layer-by-layer (LbL) deposition method using sodium poly(styrene sulfonate) as a polyanion. Linear multilayer growth was confirmed by UV-Vis spectroscopy and spectroscopic ellipsometry. Atomic force microscopy studies indicated that the micellar conformation of the polycations is preserved in the multilayer films. Fluorescence spectroscopy measurements confirmed that MgPcF64 stays embedded inside the fluorocarbon domains after the deposition process. This facile way of selectively incorporating water-insoluble, photoactive molecules into the structure of polyelectrolyte multilayers may be utilized for nanoengineering of ultrathin film-based optoelectronic devices.

Water-dispersable photoreactors based on core-shell mesoporous silica particles.

Robust solid-core silica particles with submicrometer size and anthracene-containing mesoporous shell were obtained and studied as model water-dispersable photoreactors. An anthracene derivative containing a triethoxysilyl group was synthesized and co-condensed with tetraethoxysilane in various ratios to form a photoactive mesoporous shell with a thickness up to approximately 80 nm on previously prepared solid silica particles. Mesopores of as-synthesized particles, without a commonly applied removal of the micellar templates, offered a confined space for solubilization of hydrophobic molecules. Efficient excitation energy transfer from anthracene chromophores to both hydrophobic (perylene) and hydrophilic (fluoresceine) encapsulated acceptors was observed in an aqueous dispersion of the particles. Photosensitized oxidation of encapsulated perylene was shown to proceed efficiently in such systems serving as water-dispersable photoreactors. Importantly, the designed core-shell systems were found to be stable for a long time (at least 24 months) and robust enough, thanks to the presence of solid cores, to be handled by centrifugation in aqueous dispersions. All these features make them promising candidates for reusable systems for the photosensitized degradation of water pollutants, especially hydrophobic pollutants.

Surface-grafted macromolecular nanowires with pedant fluorescein chromophores by dense non-aggregated nanoarchitectonics as versatile photoactive platforms.

In this paper, we present a facile method of synthesis and modification of poly(glycidyl methacrylate) brushes with 6-aminofluorescein (6AF) molecules. Polymer brushes were obtained using surface-grafted atom transfer radical polymerization (SI-ATRP) and functionalized in the presence of triethylamine (TEA) acting both as a reaction catalyst and an agent preventing aggregation of chromophores. Atomic force microscopy (AFM), FTIR, X-ray photoelectron spectroscopy (XPS) were used to study the structure and formation of obtained photoactive platforms. UV-Vis absorption and emission spectroscopy and confocal microscopy were conducted to investigate photoactivity of chromophores within the macromolecular matrix. Owing to the simplicity of fabrication and good ordering of the chromophore in a thin nanometric layer, the proposed method may open new opportunities for obtaining light sensors, photovoltaic devices, or other light-harvesting systems.

Human erythrocytes under stress. Spectroscopic fingerprints of known oxidative mechanisms and beyond.

In this work, we investigated the oxidative stress-related biochemical alterations in red blood cells (RBCs) and their membranes with the use of spectroscopic techniques. We aimed to show their great advantage for the in situ detection of lipid classes and secondary structures of proteins without the need for their extraction in the cellular environment. The exposition of the cells to peroxides, t-butyl hydroperoxide (tBOOH) or hydrogen peroxide (H2O2) led to different degradation processes encompassing the changes in the composition of membranes and structural modifications of hemoglobin (Hb). Our results indicated that tBOOH is generally a stronger oxidizing agent than H2O2 and this observation was congruent with the activity of superoxide and glutathione peroxidase. ATR-FTIR and Raman spectroscopies of membranes revealed that tBOOH caused primarily the partial loss and peroxidation of the lipids resulting in loss of the integrity of membranes. In turn, both peroxides induced several kinds of damage in the protein layer, including the partial decrease of their content and irreversible aggregation of spectrin, ankyrin, and membrane-bound globin. These changes were especially pronounced on the membrane surface where stress conditions induced the formation of ß-sheets and intramolecular aggregates, particularly for tBOOH. Interestingly, nano-FTIR spectroscopy revealed the lipid peroxidative damage on the membrane surface in both cases. As far as hemoglobin was concerned, tBOOH and H2O2 caused the increase of the oxyhemoglobin species and conformational alterations of its polypeptide chain into ß-sheets. Our findings confirm that applied spectroscopies effectively track the oxidative changes occurring in the structural components of red blood cells and the simplicity of conducting measurements and sample preparation can be readily applied to pharmacological and clinical studies.