Stabilized Li-Rich Layered Oxide Cathode by a Spontaneously Formed Yb and Oxygen-Vacancy Rich Layer on the Surface.

Li-rich layered oxides (LLOs) are among the most promising cathode materials with high theoretical specific capacity (>250 mAh g-1 ). However, capacity decay and voltage hysteresis due tostructural degradation during cycling impede the commercial application of LLOs. Surface engineering and element doping are two methods widely applied tomitigate the structural degradation. Here, it is found that trace amount lanthanide element Yb doping can spontaneously form a surficial Yb-rich layer with high density of oxygen vacancy on the LLO-0.3% Yb (Li1.2 Mn0.54 Co0.13-x Ybx Ni0.13 O2 where x = 0.003) cathodes, which mitigating lattice oxygen loss and the non-preferred layered-to-spinel-to-rock salt tri-phase transition. Meanwhile, there are also some Yb ions doped into the lattice of LLO, which enhance the binding energy with oxygen and stabilize the lattice in grain interior during cycling. The dual effects of Yb doping greatly mitigate the structure degradation during cycling, and facilitate fast diffusion of lithium ions. As a result, the LLO-0.3% Yb sample achieves significantly improved cycling stability, with a capacity retention of 84.69% after 100 cycles at 0.2 C and 84.3% after 200 cycles at 1 C. These finding shighlight the promising rare element doping strategy that can have both surface engineering and doping effects in preparing LLO cathodes with high stability.

Fe-Regulated Amorphous-Crystal Ni(Fe)P2 Nanosheets Coupled with Ru Powerfully Drive Seawater Splitting at Large Current Density.

Water electrolysis is an ideal method for industrial green hydrogen production. However, due to increasing scarcity of freshwater, it is inevitable to develop advanced catalysts for electrolyzing seawater especially at large current density. This work reports a unique Ru nanocrystal coupled amorphous-crystal Ni(Fe)P2 nanosheet bifunctional catalyst (Ru-Ni(Fe)P2 /NF), caused by partial substitution of Fe to Ni atoms in Ni(Fe)P2 , and explores its electrocatalytic mechanism by density functional theory (DFT) calculations. Owing to high electrical conductivity of crystalline phases, unsaturated coordination of amorphous phases, and couple of Ru species, Ru-Ni(Fe)P2 /NF only requires overpotentials of 375/295 and 520/361 mV to drive a large current density of 1 A cm-2 for oxygen/hydrogen evolution reaction (OER/HER) in alkaline water/seawater, respectively, significantly outperforming commercial Pt/C/NF and RuO2 /NF catalysts. In addition, it maintains stable performance at large current density of 1 A cm-2 and 600 mA cm-2 for 50 h in alkaline water and seawater, respectively. This work provides a new way for design of catalysts toward industrial-level seawater splitting.

Ge-Regulated Ordered Phase in Pseudosphere-Structured LiNi0.5Mn1.5O4 Spinel Effectively Inhibits Mn Dissolution.

Due to the higher energy density, high thermal stability, and low cost, LiNi0.5Mn1.5O4 (LNMO) spinel, with a large voltage operating window, has been one of the most promising cathode materials for lithium-ion batteries (LIBs). However, the interfacial reaction between the cathode and electrolyte and the two-phase reaction within the bulk of LNMO would destroy the original structure and lead to capacity deterioration, posing a significant challenge. Therefore, the way to suppress the transition-metal (TM) dissolution in LNMO has attracted much attention. However, the ordered/disordered phase regulation by metal atom doping to prohibit TM dissolution has not been extensively explored. Herein, a Ge-doping strategy is proposed to adjust the ratio of disordered/ordered phases in LNMO, resulting in exceptional structural stability. For the modified spinel cathode, there is almost no voltage drop and the capacity retention is up to 92.2% over 1000 cycles at 1C. These results demonstrate that incorporating Ge into LNMO forms a robust structure that effectively increases the amount of Mn4+ while blocking the diffusion of TM ions. In addition, Ge-doping also protects the bulk from further reactions with electrolytes, significantly enhancing the interfacial stability and relieving voltage decay in cycling. This approach can also be applied to design other high-stability cathodes through ordered/disordered phase regulation.

Inhibiting Mn Migration by Sb-Pinning Transition Metal Layers in Lithium-Rich Cathode Material for Stable High-Capacity Properties.

Owing to the interacted anion and cation redox dynamics in Li2 MnO3 , the high energy density can be obtained for lithium-rich manganese-based layered transition metal (TM) oxide [Li1.2 Ni0.2 Mn0.6 O2 , LNMO]. However, irreversible migration of Mn ions and oxygen release during highly de-lithiation can destroy its layered structure, leading to voltage and capacity decline. Herein, non-TM antimony (Sb) is pinned to the TM layer of LNMO by a facile sol-gel method. High-resolution ex and in situ characterization technologies manifest that the introduction of trace Sb inhibits the migration of Mn ions, forming a more stable structure. Sb can impressively adjust the Mn-O interaction between anions and cations, beneficial to decrease the energy level of Mn 3d and O 2p orbitals and expand their band gap according to the  theoretical calculation results. As a result, the discharge specific capacity and the energy density for SbLi1.2 [Ni0.2 Mn0.6 ]O2 (SLNMO) reaches as high as 301 mAh g-1 and 1019.6 Wh kg-1 at 0.1 C, respectively. Moreover, the voltage decay is reduced by 419.8 mV compared with LNMO. The regulative interaction between Mn 3d and isolated O 2p bands provides an accurate guidance for solving electrochemical performance deficiencies of lithium-rich manganese-based cathode oxide.

Sharply expanding single-atomically dispersed Fe-N active sites through bidirectional coordination for oxygen reduction.

For Fe-NC systems, high-density Fe-N sites are the basis for high-efficiency oxygen reduction reaction (ORR), and P doping can further lower the reaction energy barrier, especially in the form of metal-P bonding. However, limited to the irregular agglomeration of metal atoms at high temperatures, Fe-P bonds and high-density Fe-N cannot be guaranteed simultaneously. Here, to escape the random and violent agglomeration of Fe species during high-temperature carbonization, triphenylphosphine and 2-methylimidazole with a strong metal coordination capability are introduced together to confine Fe growth. With the aid of such bidirectional coordination, the high-density Fe-N site with Fe-P bonds is realized by in situ phosphorylation of Fe in an Fe-NC system (Fe-P-NC) at high temperatures. Impressively, the content of single-atomically dispersed Fe sites for Fe-P-NC dramatically increases from 2.8% to 65.3% compared with that of pure Fe-NC, greatly improving the ORR activity in acidic and alkaline electrolytes. The theoretical calculation results show that the generated Fe2P can simultaneously facilitate the adsorption of intermediates to Fe-N4 sites and the electron transfer, thereby reducing the reaction energy barrier and obtaining superior ORR activity.

Fast and In-Depth Reconstruction of Two-Dimension Cobalt-Based Zeolitic Imidazolate Framework in Glucose Oxidation Processes.

Currently, metal-organic frameworks (MOFs) have emerged as viable candidates for enduring electrode materials in nonenzyme glucose sensing. However, given the inherent water susceptibility of MOFs and their complete self-reconstruction during the process of electrochemical oxygen evolution in alkaline conditions, we are motivated to explore the truth of MOFs catalyzing glucose oxidation. In this work, we fabricated a two-dimensional cobalt-based zeolitic imidazolate framework (ZIF-L) as the electrode material for catalyzing glucose oxidation in alkaline conditions. Our explorations revealed that while the initial glucose catalytic response varied among ZIF-L samples with differing thicknesses, the ultimate steady-state catalytic performance remained largely consistent. This phenomenon arose from the transformation of ZIF-L with distinct thicknesses into CoOOH with uniform morphological and structural characteristics during the glucose catalysis process. And in situ Raman spectroscopy elucidated the sustained equilibrium within the glucose catalytic system, wherein the dynamic interconversion between CoOOH and Co(OH)2 governs the overall process. This study contributes to an enhanced understanding of the glucose catalytic mechanism aspects of nonenzymatic glucose sensor electrode materials, offering insights that serve as inspiration for the development of advanced glucose electrode materials.

Energy Band Engineering Guided Design of Bidirectional Catalyst for Reversible Li-CO2 Batteries.

Li-CO2 batteries arouse great interest in the context of carbon neutralization, but their practicability is severely hindered by the sluggish CO2 redox reaction kinetics at the cathode, which brings about formidable challenges such as high overpotential and low Coulombic efficiency. For the complex multi-electron transfer process, the design of catalysts at the molecular or atomic level and the understanding of the relationship between electron state and performance are essential for the CO2 redox. However, little attention is paid to it. In this work, using Co3 S4 as a model system, density functional theory (DFT) calculations reveal that the adjusted d-band and p-band centers of Co3 S4 with the introduction of Cu and sulfur vacancies are hybridized between CO2 and Li species, respectively, which is conducive to the adsorption of reactants and the decomposition of Li2 CO3 , and the experimental results further verify the effectiveness of energy band engineering. As a result, a highly efficient bidirectional catalyst is produced and shows an ultra-small voltage gap of 0.73 V and marvelous Coulombic efficiency of 92.6%, surpassing those of previous catalysts under similar conditions. This work presents an effective catalyst design and affords new insight into the high-performance cathode catalyst materials for Li-CO2 batteries.

Investigation of Damage and Creep for Bedding's Carbonaceous Slate with Chemical Erosion Effect.

Tunnel projects in the southwestern mountainous area of China are in full swing. According to the tunnel burial depth, structural characteristics, and chemical erosion environments of the Lixiang railway tunnel, carbonaceous slate specimens obtained in the field were taken to experimentally investigate the physical, mechanical, and creep characteristics of the bedding's slate specimens after chemical erosion. The results of scanning electron microscopy (SEM) indicate that chemical erosion leads to internal damage in the carbonaceous slate specimens, and the internal damages are increasing with the increase of erosion days. Moreover, the specimens' ultrasonic test (UT) results prove that specimens with smaller bedding angles suffer a more serious erosion and induce more internal cracks. Under conventional triaxial compression conditions with 40 MPa of confining pressures, the conventional triaxial compressive strength (σs) decreases with the decrease of the bedding angle and the increase of erosion days, and the failure modes of the specimens are mainly controlled by oblique shear fractures and accompanied by the occurrence of slip dislocation fractures between the bedding inclination. Under creep conditions with 40 MPa of confining pressures, the final deformations of specimens are increasing with the increase of erosion days, which means the longer the erosion days, the greater the deformations. The failure modes of the specimens under creep conditions are controlled by shear fractures, and for the specimen with a 60° bedding angle and long-term erosion, there are block separations and many cavities along the shear planes. Therefore, more attention should be paid to prevent serious failure of the surrounding rock if the surrounding rock has a bedding angle of 60° or suffers long-term erosion.

Surface Engineering and Trace Cobalt Doping Suppress Overall Li/Ni Mixing of Li-rich Mn-based Cathode Materials.

To supress Li/Ni mixing, the strategy of surface modification and Co doping is proposed. Doping trace Co can suppress Li/Ni mixing in the bulk phase of cathode particles, while the rock-salt shell of a cathode originally containing a large amount of Li/Ni mixed rows can be transformed into a cation-ordered spinel phase and a layered phase on the inside by means of surface engineering. Simultaneously, as a coating layer, the Li2MoO4 nanolayer forms on the surface. With the improved Li-ion diffusion, certain inhibitory effects on voltage attenuation and capacity loss are found. It shows that the surface modification with trace Co dopants greatly reduces the Li/Ni mixing level in the material, beneficial to improving the electrochemical performance. As expected, the Li-rich Mn-based cathode material with a low level of overall Li/Ni mixing shows an initial discharging capacity of 303 mAh g-1. This indicates that the joint application of doping and surface coating effectively enhances the performance of the cathode materials with an ultra-low dosage of Co. This idea is helpful to structure other layered cathode materials by surface engineering.