Comprehensive Passivation for High-Performance Quasi-2D Perovskite LEDs.

Quasi-2D perovskites have demonstrated great application potential in light-emitting diodes (LEDs). Defect passivation with chemicals plays a critical role to achieve high efficiency. However, there are still challenges in comprehensively passivating the defects distributed at surface, bulk, and buried interface of quasi-2D perovskite emitting films, hindering the further improvement of device performance. Herein, 9,9-substituted fluorene derivatives with different terminal functional groups are developed tactfully to realize comprehensive passivation, which greatly contributes to reducing nonradiative recombination at surface, suppressing ion migration in bulk, and filling interfacial charge traps at buried interface, respectively. Eventually, quasi-2D perovskite LEDs have an increased external quantum efficiency from 18.2% to 23.2%, improved operation lifetime by more than six times and lower turn-on voltage simultaneously. Here the importance of comprehensive passivation is highlighted and guidelines for the design and application of passivators for perovskite optoelectronics are provided.

Phosphonate/Phosphine Oxide Dyad Additive for Efficient Perovskite Light-Emitting Diodes.

Additives play a critical role for efficient perovskite light-emitting diodes (PeLEDs). Here, we report a novel phosphonate/phosphine oxide dyad molecular additive (PE-TPPO), with unique dual roles of passivating defects and enhancing carrier radiative recombination, to boost the device efficiency of metal-halide perovskites. In addition to the defect passivation effect of the phosphine oxide group to enhance the photoluminescence intensity and homogeneity of perovskite film, the phosphonate group with strong electron affinity can capture the injected electrons to increase local carrier concentration and accelerate the carrier radiative recombination in the electroluminescence process. Owing to their synergistic enhancement on device efficiency, quasi-two-dimensional green PeLEDs modified by this dyad additive exhibit a maximum external quantum efficiency, current efficiency, and power efficiency of 25.1 %, 100.5 cd A-1 , and 98.7 lm W-1 , respectively, which are among the reported state-of-the-art efficiencies.

Design, synthesis, and optoelectronic properties of dendrimeric Pt(II) complexes and their ability to inhibit intermolecular interaction.

Dendrimeric Pt(II) complexes [(C(∧)N)Pt(dpm)] and [Pt(C(∧)N)2] (Hdpm = dipivaloylmethane, HC(∧)N = 1,2-diphenylbenzoimidazole and its derivatives containing the carbazole dendrons) have been synthesized and characterized systematically. All of the complexes display green emission in the range of 495-535 nm that originated from the 360-440 nm absorption bands, which are assigned to dπ(Pt)→π*(L) metal-to-ligand charge transfer (MLCT) mixed with intraligand π(L)→π*(L) transition. Solution photoluminescence quantum yield (φp 0.26-0.31) of the heteroleptic complexes [(C(∧)N)Pt(dpm)] obviously increases when compared with that of complex [(C(∧)N)Pt(acac)]. Organic light-emitting diode devices based on these Pt(II) complexes with a multilayer configuration were fabricated and gave desirable electroluminescent (EL) performances, such as non- or less red-shifted EL spectra, in comparison with the photoluminescence spectra and slow efficiency roll-off with increasing brightness or current density. Complex [(t-BuCzCzPBI)Pt(dpm)] (where t-BuCzCzPBI = 1-(4-(3,6-di-(3,6-di-t-butyl-carbazol-9-yl))carbazol-9-yl)phenyl-2-phenylbenzoimidazole) showed the best performance, with a maximum current efficiency of 29.31 cd/A and a maximum external quantum efficiency (EQE) of 9.04% among the fabricated devices. Likewise, for homoleptic [Pt(t-BuCzCzPBI)2] dendrimer, the powder φp (0.14) and maximum EQE (0.74%) improve by 7 and 7.4 times, respectively, as high as they do for nondendrimeric [Pt(1,2-diphenylbenzoimidazole)2] (0.02, 0.10%), although its efficiency is still lower than that of the heteroleptic counterpart due to the severely distorted square-planar geometry of the emitting core. These results reveal that large steric hindrance from ancillary ligand (dpm) or the homoleptic conformation can effectively inhibit intermolecular interaction for these dendrimeric Pt(II) complexes.

Improved Hole-Selective Contact Enables Highly Efficient and Stable FAPbBr3 Perovskite Solar Cells and Semitransparent Modules.

Self-assembled monolayers (SAMs) as the hole-selective contact have achieved remarkable success in iodine-based perovskite solar cells (PSCs), while their impact on bromine-based PSCs is limited due to the poor perovskite crystallization behavior and mismatched energy level alignment. Here, a highly efficient SAM of (2-(3,6-diiodo-9H-carbazol-9-yl)ethyl)phosphonic acid (I-2PACz) is employed to address these challenges in FAPbBr3-based PSCs. The incorporation of I atoms into I-2PACz not only releases tensile stress within FAPbBr3 perovskite, promoting oriented crystallization and minimizing defects through halogen-halogen bond, but also optimizes the energy levels alignment at hole-selective interface for enhanced hole extraction. Ultimately, a power conversion efficiency (PCE) of 11.14% is achieved, which stands among the highest reported value for FAPbBr3 PSCs. Furthermore, the semitransparent devices/modules exhibit impressive PCEs of 8.19% and 6.23% with average visible transmittance of 41.98% and 38.99%. Remarkably, after operating at maximum power point for 1000 h, the encapsulated device maintains 93% of its initial PCE. These results demonstrate an effective strategy for achieving high-performance bromine-based PSCs toward further applications.

Enhanced Thermally Activated Delayed Fluorescence by Sole Coordination: From an Organic Molecule to Its Zinc Complex.

A BPAPTPyC organic molecule containing a sandwich structural chromophore is designed and synthesized to produce blue thermally activated delayed fluorescence (TADF). The chromophore is composed of two di(4-tert-butylphenyl)amino donors and one inserted terpyridyl acceptor hitched at positions 1, 8, and 9 of a single carbazole via the p-phenylene group, in which the multiple space π-π interactions between the donor and acceptor enable the molecule to possess the TADF feature with a high energy emission at 470 nm but a low photoluminescence quantum yield (PLQY) and a small proportion of the delayed component. In contrast, the corresponding Zn(BPAPTPyC)Cl2 complex has a high PLQY and a short lifetime with a red-shifted emission due to the enhanced rigidity and electron accepting ability of the terpyridyl group from coordination. A solution-processed organic light-emitting diode (OLED) based on the complex achieves a maximum external quantum efficiency (EQE) of 17.9% with an emission peak at 585 nm, while an OLED of the organic molecule produces blue emission with a maximum EQE of 2.7%.

The self-assembly of cystine-bridged γ-peptide-based cyclic peptide-dendron hybrids.

Novel cystine-bridged γ-peptide-based cyclic peptide-dendron hybrids have been synthesized by oxidative coupling between two cysteine residues of the linear peptides via the formation of disulfide bonds in high yields. The self-assembly of the hybrids was studied by FT-IR, (1)H NMR, TEM, and AFM analyses which indicate that the nanotube was constructed through intermolecular hydrogen-bonding of the hydrophobic cyclic peptide moieties and possesses amphiphilic property by conjugating a hydrophilic dendron on the exterior of the cyclic peptide ring. The diameters of nanofibers that consisted of nanotubes depend on the employed solvent in the self-assembly process, and uniform filaments formed from double amphiphilic nanotubes via hydrophobic interactions between their hydrophobic faces have been observed in water as well as in aqueous solutions.

Suppressing High-Order Phase for Efficient Pure Red Quasi-2D Perovskite Light-Emitting Diodes.

Quasi-two-dimensional (quasi-2D) perovskites are promising for the realization of spectrally stable pure red perovskite light-emitting diodes (PeLEDs) with a single iodide component, because they avoid the halide separation that red three-dimensional perovskites of mixed halides have faced. However, the distribution of high-order phases in solution-processed quasi-2D perovskite films causes the spectral shift away from the pure red region. Here, we introduced a simple approach of adding excessive ligand combinations to redistribute the phase distribution of quasi-2D perovskite and to inhibit the high-order phase. Appropriate excess organic ligands will not affect charge injection but will keep the efficient energy funneling and passivate the defect. The narrowed phase distribution reduced the band tail state and restrained reverse charge transfer, resulting in enhanced radiation recombination. We obtained efficient and spectrally stable pure red PeLEDs at 638 nm (approaching the Rec. 2020 specification) with a peak EQE of 11.8% and maximum luminance of 1688 cd/cm2. This study provides guidance for future developments of highly efficient pure red PeLEDs.

Enhanced Circularly Polarized Photoluminescence of Chiral Perovskite Films by Surface Passivation with Chiral Amines.

Hybrid organic-inorganic perovskites have shown promise in circularly polarized light source applications when chirality has been introduced. Circularly polarized photoluminescence (CPL) is a significant tool for investigating the chiroptical properties of perovskites. However, further research is still urgently needed, especially with regard to optimization. Here we demonstrate that chiral ligands can influence the electronic structure of perovskites, increasing the asymmetry and emitting circularly polarized photons in photoluminescence. After the modification of chiral amines, the defects of films are passivated, leading to enhanced radiation recombination for which more circularly polarized photons are emitted. Meanwhile, the modification increases the asymmetry in the electronic structure of perovskites, manifested by an increase in the magnetic dipole moment from 0.166 to 0.257 µB and an enhanced CPL signal. This approach offers the possibility of fabricating and refining circularly polarized light-emitting diodes.

Insight into Diphenyl Phosphine Oxygen-Based Molecular Additives as Defect Passivators toward Efficient Quasi-2D Perovskite Light-Emitting Diodes.

The introduction of additives has become an important method for enhancing the device performance of quasi-two-dimensional perovskite light-emitting diodes. In this work, we systematically studied the electronic and spatial effects of molecular additives on defect passivation abilities using the methyl, hydrogen, and hydroxyl groups substituted three diphenyl phosphine oxygen additives. The electron-donating conjugation effect of the hydroxyl group on diphenylphosphinic acid (OH-DPPO) leads to a more electron-rich region in OH-DPPO, and the hydroxyl group has a moderate steric hindrance. All these factors endow it with best passivation ability than the other two additives. Furthermore, ion migration was suppressed due to hydrogen bonding between the hydroxyl group and Br. Ultimately, the OH-DPPO passivated devices achieved an external quantum efficiency of 22.44% and a 6-fold improvement in lifetime. These findings provide guidance for developing multifunctional additives in the field of perovskite optoelectronics.

Phosphate ester functionalized fluorene-benzothiadiazole alternating copolymer/hydroxylated g-C3N4 heterojunctions for efficient hydrogen evolution under visible-light irradiation.

It is highly desirable to explore functionalized polymer semiconductor/g-C3N4 heterojunction photocatalysts with the tight interfacial connection for promoting the photogenerated electron-hole pair separation, improving the hydrophilicity, extending the visible light response and achieving the efficient visible light-driven H2 evolution. Herein, we synthesized novel poly[9,9-bis(3-ethyl phosphate propyl)fluorene-alt-benzothiadiazole] (PPFBT) with a phosphate ester on every repeating unit by the Suzuki polymerization and then fabricated PPFBT/hydroxylated g-C3N4 (PPFBT/CN-OH) heterojunctions via a surface hydroxyl-induced assembly process. The ratio-optimized 5PPFBT/CN-OH shows the hydrogen evolution activity of 2662.4 µmol·g-1·h-1, an 11.1-time enhancement compared to CN-OH. The improved photocatalytic activity is mainly attributed to the enhanced electron-hole pair separation due to the tight interfacial connection by hydrogen bond (P=O…H-O) and N…S interactions between PPFBT and CN-OH. It is verified that abundant phosphate ester groups of PPFBT improve the hydrophilicity and form coordination bonds with platinum (P=O:Pt) as a cocatalyst to facilitate water splitting for H2 evolution. It is also confirmed that the enhanced electron-hole pair separation is mainly dependent on the excited high-energy level electron transfer from CN-OH to PPFBT. This work provides a rational molecular design strategy for constructing efficient functionalized polymer semiconductor/g-C3N4 heterojunctions for sunlight-driven H2 evolution.

Room-Temperature Continuous-Wave Microcavity Lasers from Solution-Processed Smooth Quasi-2D Perovskite Films with Low Thresholds.

Continuous-wave (CW) lasing in quasi-two-dimensional (2D) perovskite-based distributed feedback cavities has been achieved at room temperature; however, CW microcavity lasers comprising distributed Bragg reflectors (DBRs) have rarely been prepared using solution-processed quasi-2D perovskite films because the roughness of perovskite films significantly increases intersurface scattering loss in the microcavity. Herein, high-quality spin-coated quasi-2D perovskite gain films were prepared using an antisolvent to reduce roughness. The highly reflective top DBR mirrors were deposited via room-temperature e-beam evaporation to protect the perovskite gain layer. Lasing emission of the prepared quasi-2D perovskite microcavity lasers under CW optical pumping was clearly observed at room temperature, featuring a low threshold of ∼1.4 W cm-2 and beam divergence of ∼3.5°. It was concluded that these lasers originated from weakly coupled excitons. These results elucidate the importance of controlling the roughness of quasi-2D films to achieve CW lasing, thus facilitating the design of electrically pumped perovskite microcavity lasers.

Platinum(II)-bis(aryleneethynylene) complexes for solution-processible molecular bulk heterojunction solar cells.

Four new solution-processible small-molecular platinum(II)-bis(aryleneethynylene) complexes consisting of benzothiadiazole as the electron acceptor and triphenylamine and/or thiophene as the electron donor were conveniently synthesized and characterized by physicochemical and computational methods, and utilized as the electron-donor materials in the fabrication of solution-processed bulk heterojunction (BHJ) solar cells. The effect of different electron-donor groups in these small molecules on the optoelectronic and photovoltaic properties was also examined. The optical and time-dependent density functional theory studies showed that the incorporation of stronger electron-donor groups significantly enhanced the solar-absorption abilities of the complexes. These molecular complexes can serve as good electron donors for fabricating BHJ devices by blending them with the [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(70)BM) as the electron acceptor. The best power conversion efficiency of 2.37% was achieved with the open-circuit voltage of 0.83 V, short-circuit current density of 7.10 mA cm(-2) and fill factor of 0.40 under illumination of an AM 1.5 solar-cell simulator. The spin-coated thin films showed p-channel field-effect charge transport with hole mobilities of up to 2.4×10(-4) cm(2) V(-1) s(-1) for these molecules. The present work illuminates the potential of well-defined organometallic complexes in developing light-harvesting small molecules for efficient power generation in organic photovoltaics implementation.

Linalool Impress Colorectal Cancer Deterioration by Mediating AKT/mTOR and JAK2/STAT3 Signaling Pathways.

Colorectal cancer (CRC) is one of the more common causes of cancer death worldwide. Chemotherapy is effective in the treatment of CRC, but it can produce a range of adverse effects that can significantly reduce the quality of life of CRC patients. The selection of drugs that are effective in treating CRC with few adverse effects is now an important task and is aimed at prolonging the survival of patients and improving their prognosis. In this study, CRC cells were treated with linalool using CRC cell lines as the study subjects, and cell viability, apoptosis, and cell migration were observed after treatment. Previous studies have demonstrated the therapeutic effects of linalool on CRC and its ability to inhibit CRC progression by modulating the AKT/mTOR and JAK2/STAT3 pathways.

Suppressing thermal quenching via defect passivation for efficient quasi-2D perovskite light-emitting diodes.

Emission thermal quenching is commonly observed in quasi-2D perovskite emitters, which causes the severe drop in luminescence efficiency for the quasi-2D perovskite light-emitting diodes (PeLEDs) during practical operations. However, this issue is often neglected and rarely studied, and the root cause of the thermal quenching has not been completely revealed now. Here, we develop a passivation strategy via the 2,7-dibromo-9,9-bis (3'-diethoxylphosphorylpropyl)-fluorene to investigate and suppress the thermal quenching. The agent can effectively passivate coordination-unsaturated Pb2+ defects of both surface and bulk of the film without affecting the perovskite crystallization, which helps to more truly demonstrate the important role of defects in thermal quenching. And our results reveal the root cause that the quenching will be strengthened by the defect-promoted exciton-phonon coupling. Ultimately, the PeLEDs with defect passivation achieve an improved external quantum efficiency (EQE) over 22% and doubled operation lifetime at room temperature, and can maintain about 85% of the initial EQE at 85 °C, much higher than 17% of the control device. These findings provide an important basis for fabricating practical PeLEDs for lighting and displays.

Regioregular pyridal[2,1,3]thiadiazole π-conjugated copolymers.

π-Conjugated, narrow band gap copolymers containing pyridal[2,1,3]thiadiazole (PT) were synthesized via starting materials that prevent random incorporation of the PT heterocycles relative to the backbone vector. Two regioregular structures could be obtained: in one the PTs are oriented in the same direction, and in the other the orientation of the PTs alternates every other repeat unit. Compared to their regiorandom counterparts, the regioregular polymers exhibit a 2 orders of magnitude increase of the hole mobilites, from 0.005 to 0.6 cm(2) V(-1) s(-1), as determined by field-effect transistor measurements.

Engineering of Annealing and Surface Passivation toward Efficient and Stable Quasi-2D Perovskite Light-Emitting Diodes.

Solution-processed quasi-two-dimensional (quasi-2D) perovskites with self-assembled multiple quantum well (QW) structures exhibit enhanced exciton binding energy, which is ideal for use as light emitters. Here, we have found that postannealing is important to promoting the QWs' composition transfer, and we explored the correlation among the annealing time, the external quantum efficiency (EQE), and the operational stability of the device. During thermal annealing, the low-n QWs will gradually convert to high-n phases, accompanied by an increase in grain size. The EQE and working stability of the device exhibit different annealing-time dependences; that is, with the extension of the annealing time, the EQE gradually decreases while the working stability improves. By introducing trimethylolpropane trimethacrylate (TPTA) to passivate the emitting-region defects, the annealing-time dependence of the EQE was effectively eliminated due to the reduction of the nonradiative recombination rate, wherefore high efficiency and stability can be achieved simultaneously. Our research provides an effective way to develop highly efficiency and stable perovskite light-emitting diodes.

Saturated Red Electroluminescence From Thermally Activated Delayed Fluorescence Conjugated Polymers.

Two sets of conjugated polymers with anthraquinone groups as pendant acceptors were designed and synthesized. The acceptor is tethered to an diphenylamine group via a phenylene bridge, constructing a thermally activated delayed fluorescence (TADF) unit, which is embedded into the polymer backbone through its donor fragment, while the backbone is composed of dibenzothiophene-S, S-dioxide and 2, 7-fluorene or 2, 7-carbazole groups. The polymers show distinct TADF characteristics, confirmed by transient photoluminescence spectra and theoretical calculations. The carbazole-based polymers exhibit shorter delay lifetimes and lower energy emission relative to the fluorene-based polymers. The non-doped organic light-emitting diodes fabricated via solution processing approach produce efficient red emissions with the wavelengths of 625-646 nm. The carbazole containing polymer with 2% molar content of the TADF unit exhibits the best maximum external quantum efficiency of 13.6% and saturated red electroluminescence with the Commission Internationale de l'Eclairage coordinates of (0.62, 0.37).

Rotation-restricted thermally activated delayed fluorescence compounds for efficient solution-processed OLEDs with EQEs of up to 24.3% and small roll-off.

Two triphenylamine or 4,4'-di(tert-butyl)triphenylamine groups are introduced at the 1,8-positions of 3,6-di(tert-butyl)-9-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)carbazole to yield two emitters containing a cofacial donor-acceptor-donor chromophore, which exhibit strong TADF characteristics dominated by through-space charge-transfer. The solution-processed OLEDs achieve maximum external quantum efficiencies of up to 17.4% and 24.3% with small efficiency roll-off rates.

Effect of a Pendant Acceptor on Thermally Activated Delayed Fluorescence Properties of Conjugated Polymers with Backbone-Donor/Pendant-Acceptor Architecture.

Three sets of conjugated polymers with backbone-donor/pendant-acceptor architectures, named PCzA3PyB, PCzAB2Py, and PCzAB3Py, are designed and synthesized. The three isomeric benzoylpyridine-based pendant acceptor groups are 6-benzoylpyridin-3-yl (3PyB), 4-((pyridin-2-yl)carbonyl)phenyl (B2Py) and 4-((pyridin-3-yl)carbonyl)phenyl (B3Py), whereas the identical backbone consists of 3,6-carbazolyl and 2,7-acridinyl rings. One acridine ring and each acceptor group constitute a definite thermally activated delayed fluorescence (TADF) unit, incorporated into the main chain of the polymers through the 2,7-position of the acridine ring with the varied content. All of the polymers display legible TADF features with a short microsecond-scale delayed lifetime (0.56-1.62 µs) and a small singlet/triplet energy gap (0.10-0.19 eV). Progressively redshifted emissions are observed in the order PCzAB3Py, PCzA3PyB, and PCzAB2Py owing to the different substitution patterns of the pyridyl group. Photoluminescence quantum yields can be improved by regulating the molar content of the TADF unit in the range 0.5-50 %. The non-doped organic light-emitting devices (OLEDs) fabricated by solution-processing technology emit yellow-green to orange light. The polymers with 5 mol % of the TADF unit exhibit excellent comprehensive electroluminescence performance, in which PCzAB2Py5 achieves a maximum external quantum efficiency (EQE) of 11.9 %, low turn-on voltage of 3.0 V, yellow emission with a wavelength of 573 nm and slow roll-off with EQE of 11.6 % at a luminance of 1000 cd m-2 and driving voltage of 5.5 V.

Organic donor materials based on Bis(arylene ethynylene)s for bulk heterojunction organic solar cells with high V(oc) values.

A series of purely organic small molecules 1-4 based on bis(arylene ethynylene)s with various electron-rich aromatic bridges, such as benzene, cyclopentadithiophene (CDT), and diphenyl(p-tolyl)amine, were synthesized by a Sonogashira coupling reaction. Their optical, electronic, and electrochemical properties were fully characterized. The photovoltaic properties of these molecules as donor materials and [6,6]-phenyl-C71 -butyric acid methyl ester as an acceptor material in solution-processed bulk heterojunction devices were studied. Among them, CDT-bridged molecule 2 exhibited the best photovoltaic performance and achieved a power conversion efficiency of 3.28 %. In addition, the photovoltaic efficiencies of these molecules are higher than their corresponding platinum-containing counterparts, probably owing to their stronger light absorption and improved open-circuit voltage.