Indoor airborne particle sources and outdoor haze days effect in urban office areas in Guangzhou.

To identify the sources of PM2.5 pollutants in work environments and determine whether the air quality inside an office was affected by a change in outdoor pollution status, concurrent indoor and outdoor measurements of PM2.5 were conducted at five different office spaces in the urban center of Guangzhou on low pollution days (non-episode days, NEDs), and high pollution days (haze episode days, EDs). Indoor-outdoor relationships between the PM2.5 mass and its chemical constituents, which included water-soluble ions, carbonaceous species, and metal elements, were investigated. A principle component analysis (PCA) was performed to further confirm the relationship between the indoor and outdoor PM2.5 pollution. The results reveal that (1) Printing and ETS (Environmental tobacco smoking) were found to be important office PM2.5 sources and associated with the enrichment of SO42-, OC, EC and some toxic metals indoors; (2) On EDs, serious outdoor pollution and higher air exchange rate greatly affected all studied office environments, masking the original differences of the indoor characteristics (3) Fresh air system could efficiently filter out most of the outside pollutants on both NEDs and EDs. Overall, the results of our study suggest that improper human behavior is associated with the day-to-day generation of indoor PM2.5 levels and sporadic outdoor pollution events can lead to poor indoor air quality in urban office environments. Moreover, fresh air system has been experimentally proved with data as an effective way to improve the air quality in office.

Airborne PCDD/Fs in two e-waste recycling regions after stricter environmental regulations.

Since the 2010s, the authorities of Guangdong province and local governments have enhanced law enforcement and environmental regulations to abolish open burning, acid washing, and other uncontrolled e-waste recycling activities. In this study, ambient air and indoor dust near different kinds of e-waste recycling processes were collected in Guiyu and Qingyuan to investigate the pollution status of particles and polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) after stricter environmental regulations. PM2.5 and PCDD/Fs both showed significantly reduced levels in the two regions compared with the documented data. The congener distribution and principal component analysis results also confirmed the significant differences between the current PCDD/Fs pollution characterizations and the historical ones. The estimated total intake doses via air inhalation and dust ingestion of children in the recycling region of Guiyu ranged from 10 to 32pgTEQ/(kg•day), which far exceeded the tolerable daily intake (TDI) limit (1-4pgTEQ/(kg•day). Although the measurements showed a significant reduction of the release of PCDD/Fs, the pollution status was still considered severe in Guiyu town after stricter regulations were implemented.

Polychlorinated Biphenyls (PCBs) in Human Hair and Serum from E-Waste Recycling Workers in Southern China: Concentrations, Chiral Signatures, Correlations, and Source Identification.

Hair is increasingly used as a biomarker for human exposure to persistent organic pollutants (POPs). However, the internal and external sources of hair POPs remain a controversial issue. This study analyzed polychlorinated biphenyls (PCBs) in human hair and serum from electronic waste recycling workers. The median concentrations were 894 ng/g and 2868 ng/g lipid in hair and serum, respectively. The PCB concentrations in male and female serum were similar, while concentrations in male hair were significantly lower than in female hair. Significant correlations between the hair and serum PCB levels and congener profiles suggest that air is the predominant PCB source in hair and that hair and blood PCB levels are largely dependent on recent accumulation. The PCB95, 132, and 183 chiral signatures in serum were significantly nonracemic, with mean enantiomer fractions (EFs) of 0.440-0.693. Nevertheless, the hair EFs were essentially racemic (mean EFs = 0.495-0.503). Source apportionment using the Chemical Mass Balance model also indicated primary external PCB sources in human hair from the study area. Air, blood, and indoor dust are responsible for, on average, 64.2%, 27.2%, and 8.79% of the hair PCBs, respectively. This study evidenced that hair is a reliable matrix for monitoring human POP exposure.

Emission, mass balance, and distribution characteristics of PCDD/Fs and heavy metals during cocombustion of sewage sludge and coal in power plants.

The emission, mass balance, and distribution characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as well as those of heavy metals (Hg, Cd, Pb, Cr, and Cu) were investigated during the cocombustion of 5%, 10%, 15%, and 20% sewage sludge (SS) in a pulverized coal power plant. The PCDD/F emissions increased from 7.00 to 32.72 pg I-TEQ/Nm(3) as the amount of SS in the mixed fuel (MF) increased. High sulfur content and relatively low chlorine levels in MF resulted in lower PCDD/F emissions. SS exhibited a remarkable difference in congener profiles compared with flue gas, bottom ash, and fly ash. The negative dioxin mass balance indicated that the cofiring of SS with coal in power plants was not a source but a sink of dioxins. The concentrations and emission factors of heavy metals in flue gas and bottom ash, as well as fly ash, all exhibited a tendency to increase with increasing input values of heavy metals in MF. The distribution characteristics of the investigated heavy metals were primarily dependent on the evaporative properties of these metals. The availability of chlorine could alter the heavy metal distribution behavior. The emitted pollutants in the power plant were below the legal limits.

Pollution characteristics and potential health risk of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in soil/sediment from Baiyin City, North West, China.

In order to better understand the environmental behaviors of persistent organic pollutants, the characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were investigated in twenty-three soil/sediment samples from Baiying City, Northwest China, in 2008. The possible sources and potential health risk of PCDD/Fs were also discussed. The concentrations of PCDD/Fs in nineteen soil samples varied between 20.13 and 496.26 pg/g dry weight (dw.), with an average value of 125.59 pg/g dw. The highest International Toxic Equivalent (I-TEQ) of PCDD/Fs (8.34 pg/g dw.) in soil was found at sample S1 collected from proximity to a copper metallurgy plant. The concentrations of PCDD/Fs in four sediment samples ranged from 37.69 to 491.49 pg/g dw., with an average value of 169.95 pg/g dw. The highest I-TEQ of PCDD/Fs (8.56 pg/g dw.) in sediment was found at sample S12 collected from the East big ditch with waste water discharged into the Yellow River. The results indicated that PCDD/Fs contamination of soil/sediment is originated from three sources: chlorine-containing chemicals, non-ferrous metal industrial PCDD/Fs emission and coal burning. The health risk exposure to PCDD/Fs through soil, dust ingestion and dermal absorption ranged from 0.0006 to 0.0134 pg/kg/day Word Health Organization's toxic equivalent in 1998 (WHO1998-TEQ) with mean values 0.0032 pg WHO1998-TEQ for adults and varied between 0.0012 and 0.0256 pg/kg/day WHO1998-TEQ with mean values 0.006 pg/kg/day WHO1998-TEQ for children, respectively. These results indicated that health risk of PCDD/Fs for children should be paid more attention.

Evaluation of PCDD/Fs and metals emission from a circulating fluidized bed incinerator co-combusting sewage sludge with coal.

The emission characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and heavy metals were evaluated during co-combustion of sewage sludge with coal from a circulating fluidized bed incinerator. The stack gas, slag and fly ash samples were sampled and analyzed. The gas-cleaning system consisted of electrostatic precipitators and a semi-dry scrubber. Results showed that the stack gas and fly ash exhibited mean dioxin levels of 9.4 pg I-TEQ/Nm3 and 11.65 pg I-TEQ/g, respectively, and showed great similarities in congener profiles. By contrast, the slag presented a mean dioxin level of 0.15 pg I-TEQ/g and a remarkable difference in congener profiles compared with those of the stack gas and fly ash. Co-combusting sewage sludge with coal was able to reduce PCDD/Fs emissions significantly in comparison with sewage sludge mono-combustion. The leaching levels of Hg, Pb, Cd, Ni, Cr, Cu, and As in the fly ash and slag were much lower than the limits of the environmental protection standard in China. These suggest that the co-combustion of sewage sludge and coal is an advisable treatment method from an environmental perspective.

[Pollution Characteristics and Emission Factors of PCDD/Fs from Iron and Steel Industry].

The pollution level, emission characteristics, and emission factors of PCDD/Fs from a number of steel plants were investigated in a particular province of China. The results showed that the concentration of PCDD/Fs was at a low level and decreased by 1-2 orders of magnitude compared with that in 2005-2019. In detail, the concentrations of PCDD/Fs ranged from 0.003-0.557 ng·m-3(I-TEQ), and the mean value was 0.165 ng·m-3 for the sintering process. Moreover, the concentrations of PCDD/Fs ranged from 0.006 to 0.057 ng·m-3, and the mean value was 0.025 ng·m-3 for the electric furnace process. In addition, the concentration of PCDD/Fs in the iron and steel industry from 2005 to 2020 increased first and then decreased, especially after the implementation of the new emission standard and the ultra-low emission control of conventional pollutants such as smoke, showing a significant decline. The results of fingerprint analysis showed that 2,3,7,8-TCDF was the largest congener contributing to the mass concentration, and lower chlorinated PCDFs were increased. This result differed from those of previous studies in which highly chlorinated PCDFs and PCDDs dominated, indicating that the generation source of PCDD/Fs had changed. The congener and isomer profiles of PCDD/Fs in flue gas from the sintering process were similar to those in the flue gas from the electric furnace process. Additionally, showing the characteristics of the typical high-temperature thermal process, the de novo synthesis may be the dominant mechanism of formation of PCDD/Fs in the sintering process and electric furnace process. The emission factor was 0.003-0.5 µg·t-1 (I-TEQ), and the average emission factor was (0.18±0.22) µg·t-1 for the sintering process. The emission factor was 0.04-0.5 µg·t-1, and the average emission factor was (0.27±0.23) µg·t-1 for the electric furnace process. These values were far lower than those of the standard toolkit for identification and quantification of dioxin and furan emissions released by UNEP in 2013 and the emission factors in the dioxin emission inventory of China in 2004. It is suggested that the emission factors of PCDD/Fs in the iron and steel industry of China should be studied and updated.

Human exposure to PBDEs via house dust ingestion in Guangzhou, South China.

Numerous studies have demonstrated the important role played by indoor dust in human exposure to polybrominated diphenyl ethers (PBDEs), particularly in children, who spend most of their time indoors. Few data have been available for PBDEs in house dust in China. In this study, dust samples were collected randomly from 46 houses in Guangzhou, South China, for the first time to investigate levels and pattern profiles of PBDEs and to estimate human exposure to PBDEs for adults and toddlers (6 months to 2 years old). Using gas chromatography-mass spectrometry in selected ion monitoring mode, congeners--including BDE28, 47, 66, 85, 99, 100, 153, 154, 183, and 209--were determined. The results show that BDE209 is the predominant congener in house dust, comprising 90.7% to 99.8% (mean 97.4%) of the total concentration. Of ∑tri-hepta BDEs, BDE47, 99, and 183 were the most abundant congeners, with mean contributions of 23.3%, 25.2%, and 21.9%, respectively. The intake of ∑tri-hepta BDEs via dust ingestion was 0.16-3.82 ng/d for adults and 2.1-7.64 ng/d for toddlers, accounting for 0.65% to 13.6% and 18.6% to 45.5%, respectively, of the total (based on data in our previous work) (Chen et al. 2008). With respect to intake of BDE209, the values increased to 11 to 264 ng/d for adults and to 145 to 527 ng/d for toddlers. Risk assessment indicated that PBDEs may possibly affect the health of toddlers in Guangzhou, South China. Further studies are needed to investigate the bioavailability and metabolism of PBDEs in humans to improve risk evaluation.

Polychlorinated dibenzo-dioxins and polychlorinated dibenzo-furans exposure and altered lung function: The mediating role of oxidative stress.

The lung has been reported to be one of the target organs of polychlorinated dibenzo-dioxins and polychlorinated dibenzo-furans (PCDD/Fs) in many toxicological studies. While the associations between PCDD/Fs exposure and lung function levels have not been investigated thoroughly. This study aimed to explore these associations and the potential mediating role of oxidative stress. In this study, 201 foundry workers and 222 non-exposed general residents were recruited from central China, and their lung function parameters were measured. Air and food samples were collected to determine the PCDD/Fs levels for individual PCDD/Fs exposure estimation. Serum PCDD/Fs levels were determined in a subgroup of individuals randomly selected from the study population to reflect the body burden. It was found that each 1-unit increase in ln-transformed concentration of PCDD/Fs exposure (fg TEQ/bw/day) was associated with a 0.47 L decrease in FVC and a 0.25 L decrease in FEV1. Each 1-unit increase in ln-transformed concentration of serum PCDD/Fs (fg TEQ/g lipid) was associated with a 0.36 L decrease in FVC and a 0.24 L decrease in FEV1. Urinary 8-hydroxy-2'-deoxyguanosine (8-OHdG) was not only positively related to PCDD/Fs exposure, but also inversely associated with FVC and FEV1 are FVC (ß = -0.15, 95% CI: -0.22 to -0.08) and FEV1 (ß = -0.07, 95% CI: -0.13 to -0.02). Mediation analysis revealed that urinary 8-OHdG mediated 12.22% of the associations of external PCDD/Fs exposure with FVC levels, 28.61% and 27.87% of the associations of serum PCDD/Fs with FVC and FEV1 levels respectively. Our findings suggested that PCDD/Fs exposure was associated with decreased lung function levels by a mechanism partly involving oxidatively generated damage to DNA.

Removal of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans by three coagulants in simulated coagulation processes for drinking water treatment.

Surface water from Guangzhou to which standard polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were added was treated by coagulation with ferric chloride (FC), polyaluminium chloride (PAC), and aluminium sulfate (AS) at optimum removal dosages for nature organic matter (NOM) to assess the polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) removal efficiencies. PCDD/Fs in suspended particulate matter (SPM) and treated water (TW) after coagulation were analysed. Low residual levels of PCDD/Fs were found in treated water after coagulation: 0.8% for FC, 0.9% for PAC, and 3.1% for AS. The removal efficiency calculated using these results was >99% for FC and PAC and 97-98% for AS. Most PCDD/Fs congeners could be removed by the three coagulation processes; the removal efficiency of FC and PAC was similar, and slightly higher than that of AS. The results also demonstrate that coagulation with FC preferentially removed tetra- and penta-substituted PCDD/Fs from raw water.

Associations between polychlorinated dibenzo-dioxins and polychlorinated dibenzo-furans exposure and oxidatively generated damage to DNA and lipid.

Polychlorinated dibenzo-dioxins and polychlorinated dibenzo-furans (PCDD/Fs) have been reported to induce reactive oxygen species and oxidative stress, but the dose-response relationships have not been explored in molecular epidemiological studies. In this study, a total of 602 participants were recruited, comprising of 215 foundry workers, 171 incineration workers and 216 residents living more than 5 km away from the plants as the reference group. Individual PCDD/Fs exposures were estimated according to PCDD/Fs levels of working and living ambient air and daily foods. Urinary 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG) and 8-iso-prostaglandin-F2α (8-isoPGF2α) were determined to reflect oxidatively generated damage to DNA and lipid. Generalized linear models were used to access the associations between PCDD/Fs exposure and oxidative stress biomarkers. We found that PCDD/Fs exposure and urinary oxidative stress biomarkers of workers were all higher than those of the reference group. Significantly positive exposure-response relationships between individual PCDD/Fs exposures and urinary 8-oxodG and 8-iso-PGF2α were found. Each 1-unit increase in ln-transformed levels of PCDD/Fs exposure generated a 0.78 nmol/mmol creatinine increase in ln-transformed 8-oxodG and a 0.50 ng/mmol creatinine increase in ln-transformed 8-isoPGF2α in foundry workers, a 0.49 nmol/mmol creatinine increase in ln-transformed 8-oxodG and a 0.26 ng/mmol creatinine increase in ln-transformed 8-isoPGF2α in incineration workers, compared with the reference group. And such associations were not modified by tobacco use. Our findings could help to understand the dose-response relationships between PCDD/Fs and oxidatively generated damage to DNA and lipid, and provide an epidemiologic basis for conducting research on the carcinogenesis and other toxicity mechanisms of PCDD/Fs.

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in water and suspended particulate matter from the Xijiang River, China.

Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in water and suspended particulate matter (SPM) collected from the Xijiang River, China, were measured by the quarter from September 2005 to June 2006. Total PCDD/F concentration ranged from 2.659 to 4.596pg/L for water and from 562.4 to 3259.5pg/g for SPM. Concentrations were high in summer and low in winter. I-TEQ values in water and SPM were low, ranging from 0.012 to 0.075pg/L, with a mean value of 0.039pg/L. Calculated annual loadings of total PCDD/Fs and I-TEQ were 8.55kg and 0.026kg, respectively. Composition and homologue distribution of PCDD/Fs were varied because of large seasonal differences in discharge from the Xijiang River into the South China Sea. Comparison of the PCDD/Fs homologue and congener profiles of atmospheric deposition, soil, and water revealed that soil was the dominant source of PCDD/Fs in the Xijiang River. Industrial effluents were also possible sources of PCDD/Fs. A good correlation between logK(oc) and logK(ow) was observed for 2,3,7,8-substituted PCDDs and PCDFs and correlation coefficients were 0.71 and 0.84, indicating organic matter in SPM played a dominant role in PCDD/Fs partition between SPM and water.

[Discussion of Emissions and Health Risk of Polycyclic Aromatic Hydrocarbons (PAHs) from the Retreading Process of Waste Tires].

The emissions characteristics of 16 kinds of polycyclic aromatic hydrocarbons (PAHs) in ambient air during the waste tire retreading process (open-air storage, mixing, vulcanization, and grinding processes) and in workers' dormitory were analyzed. In addition, the occupational health risk of the workers was evaluated. Results showed that PAHs were detected in all retreading processes and in the workers' dormitory. The highest concentration site was the mixing process, followed by open-air storage and vulcanization process. The lowest concentration point was in the grinding process. The average concentration of PAHs in the workers' dormitory was 11.1 ng·m-3. The PAHs at all sampling points were largely phenanthrene (Phe), fluoranthene (Flu), anthracene (Ant), and pyrene (Pry), which also had a stronger linear correlation with the total PAH concentration. An analysis of the benzene rings showed that three ring and four ring were the majority, while two ring, five ring, and six ring components accounted for less than 10%. Results of the possible influencing factors of the PAHs revealed that the open-air storage and dormitory might be affected by a combustion source, but the mixing, vulcanization, and grinding processes might be affected by rubber oil. The principal component analysis (PCA) and cluster analysis showed that the spatial location of all sites would significantly influence the distribution of PAHs during the tire retreading process. The health risk assessment showed that occupational workers had a lower risk of lifelong cancer, and there was little influence on life expectancy.

Status and perspectives of municipal solid waste incineration in China: A comparison with developed regions.

With the rapid expansion of municipal solid waste (MSW) incineration, the applicability, technical status, and future improvement of MSW incineration attract much attention in China. This paper aims to be a sensible response, with the aid of a comparison between China and some representative developed regions including the EU, the U.S., Japan, South Korea, and Taiwan area. A large number of up-to-date data and information are collected to quantitatively and impartially support the comparison, which covers a wider range of key points including spatial distribution, temporal evolution, technologies, emissions, and perspectives. Analysis results show that MSW incineration is not an outdated choice; however, policy making should prevent the potentially insufficient utilization of MSW incinerators. The structure of MSW incineration technologies is changing in China. The ratio of plants using fluidized bed is decreasing due to various realistic reasons. Decision-makers would select suitable combustion technologies by comprehensive assessments, rather than just by costs. Air pollution control systems are improved with the implementation of China's new emission standard. However, MSW incineration in China is currently blamed for substandard emissions. The reasons include the particular elemental compositions of Chinese MSW, the lack of operating experience, deficient fund for compliance with the emission standard, and the lack of reliable supervisory measures. Some perspectives and suggestions from both technical and managerial aspects are given for the compliance with the emission standard. This paper can provide strategic enlightenments for MSW management in China and other developing countries.

[Possible Sources of PCDD/Fs in Atmosphere of a Certain District in Guangdong].

This paper analyzed 17 polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs) by HRGC/HRMS in the flue gas of a certain municipal solid waste incinerator(MSWI) and its surrounding air and other possible sources in Guangdong. It discussed the feature of homologs and main toxic monomers in all samples. It also investigated the relationship among surrounding area, MSWI and possible sources using principle component analysis (PCA) and cluster analysis. The results showed that the concentration of PCDD/Fs was higher in the flue gas than the ambient air, moreover non-effect suffered by prevailing wind direction. The possible sources might be tyre factory and open burning based on spot survey. The concentration of PCDD/Fs was lower in tyre factory than upwind station, but higher at open burning spot than outdrop monitoring station. The analysis of homologs showed that OCDD, 1,2,3,4,6,7,8-HpCDD and 1,2,3,4,6,7,8-HpCDF were the main materials in the flue gas and air, meanwhile OCDF was also found in atmosphere. There was similar feature of 17 PCDD/Fs between surrounding monitoring station and tyre factory, and the same between flue gas and open burning. The further analysis showed that the linearly dependent coefficients of 1,2,3,7,8-PeCDD and 2,3,4,6,7,8-HxCDF were 0.95 and 0.75, respectively. It showed the strong correlation of two monomers in all ambient air samples. The PCA and cluster analysis showed that MSWI influenced the surrounding air, tyre factory had an impact on upwind station, and open burning had a lower effect on outdrop monitoring station.

[Dioxin Pollution and Occupational Inhalation Exposure of PCDD/Fs in Municipal Solid Waste Incinerator].

To assess the pollution levels, characteristics, and the pollution sources and occupational inhalation exposure of polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in the workshops,ambient air samples in different types of incinerators of two municipal solid waste incinerators(MSWI) were collected and analyzed. The results showed that ① The I-TEQ concentration ranged from 0.034-2.152 pg·m-3in the two waste incineration plants, and the most sites' I-TEQ exceeded the ambient air quality standard. Besides, the I-TEQ concentration behind the incineration plant was higher than others. ② The dioxins in incineration plant were dominated by OCDD and 1,2,3,4,6,7,8-HpCDD. For MSWI A, the flue gas and the fly ash had major effect on PCDD/Fs, while the dioxins pollution in MSWI B was only affected by the fly ash. ③ Occupational inhalation exposure of PCDD/Fs was 0.01-1.10 pg·(kg·d)-1 in incineration plant, some occupational inhalation exposure values exceeded the evaluation standard, and the areas behind the incinerators were evaluated to have a high exposure risk.

[Internal Exposure Levels of PAHs of Primary School Students in Guangzhou].

In order to investigate the internal exposure levels of polycyclic aromatic hydrocarbons (PAHs) in primary school students of Guangzhou, the research collected urine of 78 and 86 primary school students from two primary schools in the summer of 2014, one school located in the ordinary residential area and the other in the industrial area. The contents of 10 kinds of OH-PAHs were tested by the rapid liquid chromatography coupled to triple quadruple tandem mass spectrometry. The results showed that the concentrations of total OH-PAHs in primary school students in the residential zone ranged from 0.83 µmol · mol⁻¹ to 80.63 µmol · mol⁻¹, while those in industrial area ranged from 1.06 µmol · mol⁻¹ to 72.47 µmol · mol⁻¹. The geometric average concentrations were 6.18 µmol · mol⁻¹ and 6.47 µmol · mol⁻¹, respectively, and there was no statistical significance between them (P > 0.05). Comparison of the exposure levels of different components of PAHs in the two areas found that all the OH-PAHs had no significant difference except for the levels of 1- OHP (P < 0.05). We should also pay attention to the higher exposure levels of PAHs in both areas when compared with other researches. In addition, the OH-PAHs in primary school students in the ordinary residential area had a good correlation between 0. 511 and 0.928 (P < 0.01), whereas there was no correlation between 1-OHP and 2-OHN, 1-OHN in the primary school students in the industrial area and other OH-PAHs had relatively weak correlation ranging from 0.338 to 0.855 (P < 0.01). This difference might indicate different pollution sources of PAHs in different functional areas, which was relatively single in the residential area, while the industrial area was polluted by multiple sources of industrial enterprises and logistics transportation emissions.

Environmental application of millimetre-scale sponge iron (s-Fe(0)) particles (III): The effect of surface silver.

To enhance the dechlorination reactivity of millimetric sponge iron (s-Fe(0)), a facile one-pot method was used to decorate s-Fe(0) with Ag(+) ions under ambient conditions. The results recorded by X-ray diffraction patterns, X-ray photoelectron spectra and high-resolution transmission electron microscopy demonstrated that the growth of Ag(0) was dominated primarily by (111) plane with a mean length of ∼20 nm. The roles of Ag(0) loading, catalyst dosage, particle size, initial pH and contaminant concentration were assessed during the removal of pentachlorophenol (PCP). Catalyst recyclability was also studied. The results revealed that 3-5mm s-Fe(0) particles with 5 wt% Ag(0) loading exhibited the best performance with a dose of 3.0 g per 60 mL PCP solution. In addition, the dechlorination of PCP followed two-step, pseudo-first-order reaction kinetics, and Ag(0)-s-Fe(0) was advantageous compared with bimetals of nanoscale zero-valent iron, iron power and iron flakes. The dechlorination mechanism of PCP over Ag(0)-s-Fe(0) was attributed to the surface Ag(0) decoration, which catalyzed the formation of reactive hydrogen atoms for indirect reaction, and the direct electron transfer via Fe-Ag(0) galvanic cells for direct reaction. This suggests that Ag-based bimetals of s-Fe(0) have great potential in the pretreatment of organic halogen compounds in aqueous solution.

[Emission of PCDD/Fs from Crematories and Its Influencing Factors].

To analysis the influencing factors for the emssions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as structure of crematory, air pollution control device (APCD) and funeral objects, etc, we collected and measured the PCDD/Fs emissions in flue gas from 13 crematories in China. Then we proposed some supervision suggestions on measures of pollution control and management. The results indicated that the emission levels of PCDD/Fs (as the toxic equivalent concentration, TEQ) was ranged in a large gap from 0.027 to 15.8 ng x m(-3), and the average was 3.2 ng x m(-3). Emissions factor of PCDD/Fs (as TEQ) from 13 crematories varied between 45.9 and 22 236 ng x body(-1), and the average was 4 738 ng x body(-1). The emissions of PCDD/Fs from flat incinerators were generally lower, whereas higher ratio up to the national discharge standard, than that of car type incinerators. Congener distribution of PCDD/Fs in flue gas from 13 crematories were different from each other. Since the emission of PCDD/Fs from some crematories remains in high level, it is necessary to control pollution from the source, improve the pollution control technology, and strengthen government supervision, by following measures: 11 cremating funeral objects separately from corpse; 22 adding one

Influence of a municipal solid waste incinerator on ambient air PCDD/F levels: a comparison of running and non-running periods.

The concentration of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the ambient air of a municipal solid waste incinerator (MSWI) during its running and non-running periods was monitored in this study to investigate the contribution of the MSWI to PCDD/F pollution in the vicinal environment. Results show that the PCDD/F levels for the normal MSWI running period and after shut-down ranged 0.156-1.44 pg I-TEQ/m(3) (0.514 pg I-TEQ/m(3)) and 0.158-0.648 pg I-TEQ/m(3) (0.345 pg I-TEQ/m(3)), respectively. Significant differences were found between the results of the two surveys in 2011 and 2012. High PCDD/F levels were observed in two of the seven study sites in 2011, and these levels directly declined in 2012. A dramatic increase in PCDD/F concentrations was observed in two sites in 2012. Comparison of congener and homologue fingerprint characteristics in the two surveys, together with principal component analysis, revealed that the PCDD/F levels in all of the samples collected in 2012 and in three of the samples collected in 2011 are mainly influenced by heavy traffic. MSWI is the primary PCDD/F emission sources of the PCDD/Fs detected in the remaining samples collected in 2011.