RESUMO
Despite of suitable band structures for harvesting solar light and driving water redox reactions, polymeric carbon nitride (PCN) has suffered from poor charge transfer ability and sluggish surface reaction kinetics, which limit its photocatalytic activity for water splitting. Herein, atomically dispersed Zn-coordinated three-dimensional (3D) sponge-like PCN (Zn-PCN) is synthesized through a novel intermediate coordination strategy. Advanced characterizations and theoretical calculations well evidence that Zn single atoms are coordinated and stabilized on PCN in the form of Zn-N6 configuration featured with an electron-deficient state. Such an electronic configuration has been demonstrated contributive to promoted electron excitation, accelerated charge separation and transfer as well as reduced water redox barriers. Further benefited from the abundant surface active sites derived from the 3D porous structure, Zn-PCN realizes visible-light photocatalysis for overall water splitting with H2 and O2 simultaneously evolved at a stoichiometric ratio of 2:1. This work brings new insights into the design of novel single-atom photocatalysts by deepening the understanding of electronic configurations and reactive sites favorable to excellent photocatalysis for water splitting and related solar energy conversion reactions.
RESUMO
Polymeric carbon nitride (PCN) has been widely used as a metal-free photocatalyst for solar hydrogen generation from water. However, rapid charge carrier recombination and sluggish water catalysis kinetics have greatly limited its photocatalytic performance for overall water splitting. Herein, a single-atom Ni terminating agent was introduced to coordinate with the heptazine units of PCN to create new hybrid orbitals. Both theoretical calculation and experimental evidence revealed that the new hybrid orbitals synergistically broadened visible light absorption via a metal-to-ligand charge transfer (MLCT) process, and accelerated the separation and transfer of photoexcited electrons and holes. The obtained single-atom Ni terminated PCN (PCNNi), without an additional cocatalyst loading, realized efficient photocatalytic overall water splitting into easily-separated gas-product H2 and liquid-product H2O2 under visible light, with evolution rates reaching 26.6 and 24.0 µmol g-1 h-1, respectively. It was indicated that single-atom Ni and the neighboring C atom served as water oxidation and reduction active sites, respectively, for overall water splitting via a two-electron reaction pathway.
RESUMO
Electronic structure greatly determines the band structures and the charge carrier transport properties of semiconducting photocatalysts and consequently their photocatalytic activities. Here, by simply calcining the mixture of graphitic carbon nitride (g-C3 N4 ) and sodium borohydride in an inert atmosphere, boron dopants and nitrogen defects are simultaneously introduced into g-C3 N4 . The resultant boron-doped and nitrogen-deficient g-C3 N4 exhibits excellent activity for photocatalytic oxygen evolution, with highest oxygen evolution rate reaching 561.2 µmol h-1 g-1 , much higher than previously reported g-C3 N4 . It is well evidenced that with conduction and valence band positions substantially and continuously tuned by the simultaneous introduction of boron dopants and nitrogen defects into g-C3 N4 , the band structures are exceptionally modulated for both effective optical absorption in visible light and much increased driving force for water oxidation. Moreover, the engineered electronic structure creates abundant unsaturated sites and induces strong interlayer C-N interaction, leading to efficient electron excitation and accelerated charge transport. In the present work, a facile approach is successfully demonstrated to engineer the electronic structures and the band structures of g-C3 N4 with simultaneous introduction of dopants and defects for high-performance photocatalytic oxygen evolution, which can provide informative principles for the design of efficient photocatalysis systems for solar energy conversion.
RESUMO
Lead halide perovskite semiconductors have low-frequency phonon modes within the lead halide sublattice and thus are considered to be soft. The soft lattice is considered to be important in defining their interesting optoelectronic properties. Electron-phonon coupling governs hot-carrier relaxation, carrier mobilities, carrier lifetimes, among other important electronic characteristics. Directly observing the interplay between free charge carriers and phonons can provide details on how phonons impact these properties (e.g., exciton populations and other collective modes). Here, we observe a delicate interplay among carriers, phonons, and excitons in mixed-cation and mixed-halide perovskite films by simultaneously resolving the contribution of charge carriers and phonons in time-resolved terahertz photoconductivity spectra. We are able to observe directly the increase in phonon population during carrier cooling and discuss how thermal equilibrium populations of carriers and phonons modulate the carrier transport properties, as well as reduce the population of carriers within band tails. We are also able to observe directly the formation of free charge carriers when excitons interact with phonons and dissociate and to describe how free carriers and exciton populations exchange through phonon interactions. Finally, we also time-resolve how the carriers are screened via the Coulomb interaction at low and room temperatures. Our studies shed light on how charge carriers interact with the low-energy phonons and discuss implications.
RESUMO
Solution-processed organic-inorganic hybrid perovskites are promising emitters for next-generation optoelectronic devices. Multiple-colored, bright light emission is achieved by tuning their composition and structures. However, there is very little research on exploring optically active organic cations for hybrid perovskites. Here, unique room-temperature phosphorescence from hybrid perovskites is reported by employing novel organic cations. Efficient room-temperature phosphorescence is activated by designing a mixed-cation perovskite system to suppress nonradiative recombination. Multiple-colored phosphorescence is achieved by molecular design. Moreover, the emission lifetime can be tuned by varying the perovskite composition to achieve persistent luminescence. Efficient room-temperature phosphorescence is demonstrated in hybrid perovskites that originates from the triplet states of the organic cations, opening a new dimension to the further development of perovskite emitters with novel functional organic cations for versatile display applications.
RESUMO
Strong spin-orbit coupling, resulting in the formation of spin-momentum-locked surface states, endows topological insulators with superior spin-to-charge conversion characteristics, though the dynamics that govern it have remained elusive. Here, an all-optical method is presented, which enables unprecedented tracking of the ultrafast dynamics of spin-to-charge conversion in a prototypical topological insulator Bi2 Se3 /ferromagnetic Co heterostructure, down to the sub-picosecond timescale. Compared to pure Bi2 Se3 or Co, a giant terahertz emission is observed in the heterostructure that originates from spin-to-charge conversion, in which the topological surface states play a crucial role. A 0.12 ps timescale is identified that sets a technological speed limit of spin-to-charge conversion processes in topological insulators. In addition, it is shown that the spin-to-charge conversion efficiency is temperature independent in Bi2 Se3 as expected from the nature of the surface states, paving the way for designing next-generation high-speed optospintronic devices based on topological insulators at room temperature.
RESUMO
(LaTiO2N)1-x(LaCrO3)x continuous solid solutions with an orthorhombic-phase ABX3 perovskite structure and with varied LaCrO3 contents (0 ≤ x ≤ 1) were synthesized by a polymerized complex method followed by a post-treatment process of nitridation for the first time. Visible-light-driven photocatalytic H2-evolution activities of the solid solutions gradually increased with the increase of x from 0.0 to 0.3, and then sharply decreased with the further increase of x from 0.3 to 1.0. With the increase of x, on the one hand, the narrowed bandgaps of solid solutions would enhance the generation of charge carriers and the increased lattice distortion of solid solutions could promote the separation and migration of charge carriers, thus mainly contributing to the improvement of photocatalytic activities; on the other hand, the lowered CBMs of solid solutions would reduce the driving force for reducing H2O to H2 and the decreased surface areas of solid solutions would weaken the adsorption of reactants and reduce the reactive sites, thereby resulting in the deterioration of photocatalytic activities.
RESUMO
Semiconducting photocatalytic solar-hydrogen conversion (SHC) from water is a great challenge for renewable fuel production. Organic semiconductors hold great promise for SHC in an economical and environmentally benign manner. However, organic semiconductors available for SHC are scarce and less efficient than most inorganic ones, largely due to their intrinsic Frenkel excitons with high binding energy. In this study the authors report polymer heterojunction (PHJ) photocatalysts consisting of polyfluorene family polymers and graphitic carbon nitride (g-C3 N4 ) for efficient SHC. A molecular design strategy is executed to further promote the exciton dissociation or light harvesting ability of these PHJs via alternative approaches. It is revealed that copolymerizing electron-donating carbazole unit into the poly(9,9-dioctylfluorene) backbone promotes exciton dissociation within the poly(N-decanyl-2,7-carbazole-alt-9,9-dioctylfluorene) (PCzF)/g-C3 N4 PHJ, achieving an enhanced apparent quantum yield (AQY) of 27% at 440 nm over PCzF/g-C3 N4 . Alternatively, copolymerizing electron-accepting benzothiadiazole unit extended the visible light response of the obtained poly(9,9-dioctylfluorene-alt-benzothiadiazole)/g-C3 N4 PHJ, leading to an AQY of 13% at 500 nm. The present study highlights that constructing PHJs and adapting a rational molecular design of PHJs are effective strategies to exploit more of the potential of organic semiconductors for efficient solar energy conversion.
RESUMO
We study the temperature-dependent phonon modes of the organometallic lead iodide perovskite CH3NH3PbI3 thin film across the terahertz (0.5-3 THz) and temperature (20-300 K) ranges. These modes are related to the vibration of the Pb-I bonds. We found that two phonon modes in the tetragonal phase at room temperature split into four modes in the low-temperature orthorhombic phase. By use of the Lorentz model fitting, we analyze the critical behavior of this phase transition. The carrier mobility values calculated from the low-temperature phonon mode frequencies, via two theoretical approaches, are found to agree reasonably with the experimental value (â¼2000 cm(2) V(-1) s(-1)) from a previous time-resolved THz spectroscopy work. Thus, we have established a possible link between terahertz phonon modes and the transport properties of perovskite-based solar cells.
RESUMO
To gain high photocatalytic activity for hydrogen evolution, both charge separation efficiency and surface reaction kinetics must be improved, and together would be even better. In this study, the visible light photocatalytic hydrogen production activity of graphitic carbon nitride (g-C3N4) was greatly enhanced with MgFe2O4 modification. It was demonstrated that MgFe2O4 could not only extract photoinduced holes from g-C3N4, leading to efficient charge carrier separation at the g-C3N4/MgFe2O4 interface, but also act as an oxidative catalyst accelerating the oxidation reaction kinetics at g-C3N4 surface. This dual function of MgFe2O4 thus contributed to the great improvement (up to three-fold) in photocatalytic activity for hydrogen generation over g-C3N4/MgFe2O4 as compared to pristine g-C3N4, after loading Pt by photoreduction method. It was revealed that in the Pt/g-C3N4/MgFe2O4 system, the photoinduced electrons and holes were entrapped by Pt and MgFe2O4, respectively, giving rise to the promoted charge separation; moreover, as evidenced by electrochemical analysis, the electrocatalysis effect of MgFe2O4 benefited the oxidation reaction at g-C3N4 surface.