Cu2+ coordination-induced in situ photo-to-heat on catalytic sites to hydrolyze ß-lactam antibiotics pollutants in waters.

For degradation of ß-lactam antibiotics pollution in waters, the strained ß-lactam ring is the most toxic and resistant moiety to biodegrade and redox-chemically treat among their functional groups. Hydrolytically opening ß-lactam ring with Lewis acid catalysts has long been recognized as a shortcut, but at room temperature, such hydrolysis is too slow to be deployed. Here, we found when Cu2+ was immobilized on imine-linked COF (covalent organic framework) (Cu2+/Py-Bpy-COF, Cu2+ load is 1.43 wt%), as-prepared composite can utilize the light irradiation (wavelength range simulated sunlight) to in situ heat anchored Cu2+ Lewis acid sites through an excellent photothermal conversion to open the ß-lactam ring followed by a desired full-decarboxylation of hydrolysates. Under 1 W/cm2 simulated sunlight, Cu2+/Py-Bpy-COF powders placed in a microfiltration membrane rapidly cause a temperature rising even to ~211.7 °C in 1 min. It can effectively hydrolyze common ß-lactam antibiotics in waters and even antibiotics concentration is as high as 1 mM and it takes less than 10 min. Such photo-heating hydrolysis rate is ~24 times as high as under dark and ~2 times as high as Cu2+ homogenous catalysis. Our strategy significantly decreases the interference from generally coexisting common organics in waters and potential toxicity concerns of residual carboxyl groups in hydrolysates and opens up an accessible way for the settlement of ß-lactam antibiotics pollutants by the only energy source available, the sunlight.

Genome-wide association studies of body size traits in Tibetan sheep.

BACKGROUND: Elucidating the genetic variation underlying phenotypic diversity will facilitate improving production performance in livestock species. The Tibetan sheep breed in China holds significant historical importance, serving as a fundamental pillar of Qinghai's animal husbandry sector. The Plateau-type Tibetan sheep, comprising 90% of the province's population, are characterized by their tall stature and serve as the primary breed among Tibetan sheep. In contrast, Zhashijia sheep exhibit larger size and superior meat quality. These two species provide an excellent model for elucidating the genetic basis of body size variation. Therefore, this study aims to conduct a comprehensive genome-wide association study on these two Tibetan sheep breeds to identify single nucleotide polymorphism loci and regulatory genes that influence body size traits in Tibetan sheep. RESULT: In this study, the phenotypic traits of body weight, body length, body height, chest circumference, chest depth, chest width, waist angle width, and pipe circumference were evaluated in two Tibetan sheep breeds: Plateau-type sheep and Zhashijia Tibetan sheep. Whole genome sequencing generated 48,215,130 high-quality SNPs for genome-wide association study. Four methods were applied and identified 623 SNPs significantly associated with body size traits. The significantly associated single nucleotide polymorphisms identified in this study are located near or within 111 candidate genes. These genes exhibit enrichment in the cAMP and Rap1 signaling pathways, significantly affecting animal growth, and body size. Specifically, the following genes were associated: ASAP1, CDK6, FRYL, NAV2, PTPRM, GPC6, PTPRG, KANK1, NTRK2 and ADCY8. CONCLUSION: By genome-wide association study, we identified 16 SNPs and 10 candidate genes associated with body size traits in Tibetan sheep, which hold potential for application in genomic selection breeding programs in sheep. Identifying these candidate genes will establish a solid foundation for applying molecular marker-assisted selection in sheep breeding and improve our understanding of body size control in farmed animals.

Visible Light-sensitized CO2 Methanation along a Relaxed Heat Available Route.

In photocatalysis, the resulted heat by the relaxation of most of incident light no longer acts as the industrially favorite driving force back to the target photo-reaction due to more or less the negative relation between photocatalytic efficiency and temperature. Here, we reported a visible light-sensitized protocol that completely reversed the negatively temperature-dependent efficiency in photo-driven CO2 methanation with saturated water vapor. Uniform Pt/N-TiO2/PDI self-assembly material decisively injects the excited electron of PDI sensitizer into N-TiO2 forming Ti-H hydride which is crucially temperature-dependent nucleophilic species to dominate CO2 methanation, rather than conventionally separated and trapped electrons on the conductor band. Meanwhile, the ternary composite lifts itself temperature from room temperature to 305.2 °C within 400s only by the failure excitation upon simulated sunlight of 2.5 W/cm2, and smoothly achieves CO2 methanation with a record number of 4.98 mmol g-1 h-1 rate, compared to less than 0.02 mmol g-1 h-1 at classic Pt/N-TiO2/UV photocatalysis without PDI sensitization. This approach can reuse ~53.9% of the relaxed heat energy from the incident light thereby allow high-intensity incident light as strong as possible within a flowing photo-reactor, opening the most likely gateways to industrialization.

Optical Variation and Molecular Transformation of Brown Carbon During Oxidation by NO3• in the Aqueous Phase.

The NO3•-driven nighttime aging of brown carbon (BrC) is known to greatly impact its atmospheric radiative forcing. However, the impact of oxidation by NO3• on the optical properties of BrC in atmospheric waters as well as the associated reaction mechanism remain unclear. In this work, we found that the optical variation of BrC proxies under environmentally relevant NO3• exposure depends strongly on their sources, with enhanced light absorptivity for biomass-burning BrC but bleaching for urban aerosols and humic substances. High-resolution mass spectrometry using FT-ICR MS shows that oxidation by NO3• leads to the formation of light-absorbing species (e.g., nitrated organics) for biomass-burning BrC while destroying electron donors (e.g., phenols) within charge transfer complexes in urban aerosols and humic substances, as evidenced by transient absorption spectroscopy and NaBH4 reduction experiments as well. Moreover, we found that the measured rate constants between NO3• with real BrCs (k = (1.8 ± 0.6) × 107 MC-1s-1, expressed as moles of carbon) are much higher than those of individual model organic carbon (OC), suggesting the reaction with OCs may be a previously ill-quantified important sink of NO3• in atmospheric waters. This work provides insights into the kinetics and molecular transformation of BrC during the oxidation by NO3•, facilitating further evaluation of BrC's climatic effects and atmospheric NO3• levels.

Efficient and Selective Electrochemical Nitrate Reduction to N2 Using a Flow-Through Zero-Gap Electrochemical Reactor with a Reconstructed Cu(OH)2 Cathode: Insights into the Importance of Inter-Electrode Distance.

Electrochemically converting nitrate, a widely distributed nitrogen contaminant, into harmless N2 is a feasible and environmentally friendly route to close the anthropogenic nitrogen-based cycle. However, it is currently hindered by sluggish kinetics and low N2 selectivity, as well as scarce attention to reactor configuration. Here, we report a flow-through zero-gap electrochemical reactor that shows a high performance of nitrate reduction with 100% conversion and 80.36% selectivity of desired N2 in the chlorine-free system at 100 mg-N·L-1 NO3- while maintaining a rapid reduction kinetics of 0.07676 min-1. More importantly, the mass transport and current utilization efficiency are significantly improved by shortening the inter-electrode distance, especially in the zero-gap electrocatalytic system where the current efficiency reached 50.15% at 5 mA·cm-2. Detailed characterizations demonstrated that during the electroreduction process, partial Cu(OH)2 on the cathode surface was reconstructed into stable Cu/Cu2O as the active phase for efficient nitrate reduction. In situ characterizations revealed that the highly selective *NO to *N conversion and the N-N coupling step played crucial roles during the selective reduction of NO3- to N2 in the zero-gap electrochemical system. In addition, theoretical calculations demonstrated that improving the key intermediate *N coverage could effectively facilitate the N-N coupling step, thereby promoting N2 selectivity. Moreover, the environmental and economic benefits and long-term stability shown by the treatment of real nitrate-containing wastewater make our proposed electrocatalytic system more attractive for practical applications.

Oxidation of Polycyclic Aromatic Hydrocarbons (PAHs) Triggered by a Photochemical Synergistic Effect between High- and Low-Molecular-Weight PAHs.

Photooxidation of polycyclic aromatic hydrocarbons (PAHs), which are widely observed in atmospheric particulate matter (PM), largely determines their atmospheric fate. In the environment, PAHs are highly complex in chemical composition, and a great variety of PAHs tend to co-occur. Despite extensive investigation on the photochemical behavior of individual PAH molecules, the photochemical interaction among these coexisting PAHs is still not well understood. Here, we show that during photooxidation, there is a strong photochemical synergistic effect among PAHs extracted from soot particles. We find that neither small PAHs with low molecular weights of 200-350 Da and 4-8 aromatic rings (named PAHsmall) nor large PAHs with high molecular weights of 350-600 Da and 8-14 aromatic rings (named PAHlarge) undergo photooxidation under red-light irradiation (λ = 648 nm), even though PAHlarge can absorb light with this wavelength. Interestingly, when PAHlarge is mixed with PAHsmall, substantial photooxidation is observed for both PAHlarge and PAHsmall. Comparisons of in situ infrared (IR), high-resolution mass spectrometry, and electron paramagnetic resonance analysis indicate that the presence of PAHsmall inhibits the light quenching effect arising from the π-π stacking of PAHlarge. This leads to the formation of singlet oxygen (1O2), which initiates the photooxidation. Our findings reveal a new mechanism for the photooxidation of PAHs and suggest that complex atmospheric PAHs exhibit distinct photoreactivity from simple systems.

Distinct Photochemistry of Odd-Carbon PAHs from the Even-Carbon Ones During the Photoaging and Analysis of Soot.

Polycyclic aromatic hydrocarbons (PAHs) are the primary organic carbons in soot. In addition to PAHs with even carbon numbers (PAHeven), substantial odd-carbon PAHs (PAHodd) have been widely observed in soot and ambient particles. Analyzing and understanding the photoaging of these compounds are essential for assessing their environmental effects. Here, using laser desorption ionization mass spectrometry (LDI-MS), we reveal the substantially different photoreactivity of PAHodd from PAHeven in the aging process and their MS detection through their distinct behaviors in the presence and absence of elemental carbon (EC) in soot. During direct photooxidation of organic carbon (OC) alone, the PAHeven are oxidized more rapidly than the PAHodd. However, the degradation of PAHodd becomes preponderant over PAHeven in the presence of EC during photoaging of the whole soot. All of these observations are proposed to originate from the more rapid hydrogen abstraction reaction from PAHodd in the EC-photosensitized reaction, owing to its unique structure of a single sp3-hybridized carbon site. Our findings reveal the photoreactivity and reaction mechanism of PAHodd for the first time, providing a comprehensive understanding of the oxidation of PAHs at a molecular level during soot aging and highlight the enhanced effect of EC on PAHodd ionization in LDI-MS analysis.

The plasmonic effect of Cu on tuning CO2 reduction activity and selectivity.

Copper (Cu) has been widely used for catalyzing the CO2 reduction reaction (CO2RR), but the plasmonic effect of Cu has rarely been explored for tuning the activity and selectivity of the CO2RR. Herein, we conducted a quantitative analysis on the plasmon-generated photopotential (Ehv) of a Cu nanowire array (NA) photocathode and found that Ehv exclusively reduced the apparent activation energy (Ea) of reducing CO2 to CO without affecting the competitive hydrogen evolution reaction (HER). As a result, the CO production rate was enhanced by 52.6% under plasmon excitation when compared with that under dark conditions. On further incorporation with a polycrystalline Si photovoltaic device, the Cu NA photocathode exhibits good stability in terms of photocurrent and syngas production (CO : H2 = 2 : 1) within 10 h. This work validates the crucial role of the plasmonic effect of Cu on modulating the activity and selectivity of the CO2RR.

Highly Selective Ammonia Oxidation on BiVO4 Photoanodes Co-catalyzed by Trace Amounts of Copper Ions.

High-efficient photoelectrocatalytic direct ammonia oxidation reaction (AOR) conducted on semiconductor photoanodes remains a substantial challenge. Herein, we develop a strategy of simply introducing ppm levels of Cu ions (0.5-10 mg/L) into NH3 solutions to significantly improve the AOR photocurrent of bare BiVO4 photoanodes from 3.4 to 6.3 mA cm-2 at 1.23 VRHE , being close to the theoretical maximum photocurrent of BiVO4 (7.5 mA cm-2 ). The surface charge-separation efficiency has reached 90 % under a low bias of 0.8 VRHE . This AOR exhibits a high Faradaic efficiency (FE) of 93.8 % with the water oxidation reaction (WOR) being greatly suppressed. N2 is the main AOR product with FEs of 71.1 % in aqueous solutions and FEs of 100 % in non-aqueous solutions. Through mechanistic studies, we find that the formation of Cu-NH3 complexes possesses preferential adsorption on BiVO4 surfaces and efficiently competes with WOR. Meanwhile, the cooperation of BiVO4 surface effect and Cu-induced coordination effect activates N-H bonds and accelerates the first rate-limiting proton-coupled electron transfer for AOR. This simple strategy is further extended to other photoanodes and electrocatalysts.

Light-Regulated Nucleation for Growing Highly Uniform Single-Crystalline Microrods.

We report a light-irradiation method to control the synchronous nucleation of a donor-acceptor (D-A) fluorophore for growing highly uniform single-crystalline microrods, which is in sharp contrast to the prevailing methods of restricting spontaneous nucleation and additionally adding seeds. The D-A fluorophore was observed to undergo photoinduced electron transfer to CrCl3, leading to the generation of HCl and the subsequent protonation of the D-A fluorophore. By intensifying photoirradiation or prolonging its duration, the concentration of protonated D-A fluorophores can be rapidly increased to a high supersaturation level. This results in the formation of a controlled number of nuclei in a synchronous manner, which in turn kickstart the epitaxial growth of protonated D-A fluorophores towards uniform single-crystalline microrods of controlled sizes. The light-regulated synchronous nucleation and uniform growth of microrods are a unique phenomenon that can only be achieved by specific Lewis acids, making it a novel probing method for sensitively detecting strong Lewis acids such as chromium chloride.

Accelerated Photocatalytic Carbon Dioxide Reduction and Water Oxidation under Spatial Synergy.

Photocatalytic conversion of CO2 and H2 O into fuels and oxygen is a highly promising solution for carbon-neutral recycling. Traditionally, researchers have studied CO2 reduction and H2 O oxidation separately, overlooking potential synergistic interplay between these processes. This study introduces an innovative approach, spatial synergy, which encourages synergistic progress by bringing the two half-reactions into atomic proximity. To facilitate this, we developed a defective ZnIn2 S4 -supported single-atom Cu catalyst (Cu-SA/D-ZIS), which demonstrates remarkable catalytic performance with CO2 reduction rates of 112.5 µmol g-1 h-1 and water oxidation rates of 52.3 µmol g-1 h-1 , exhibiting a six-fold enhancement over D-ZIS. The structural characterization results indicated that the trapping effect of vacancy associates on single-atom copper led to the formation of an unsaturated coordination structure, Cu-S3 , consequently giving rise to the CuZn 'VS ⋅⋅VZn " defect complexes. FT-IR studies coupled with theoretical calculations reveal the spatially synergistic CO2 reduction and water oxidation on CuZn 'VS ⋅⋅VZn ", where the breakage of O-H in water oxidation is synchronized with the formation of *COOH, significantly lowering the energy barrier. Notably, this study introduces and, for the first time, substantiates the spatial synergy effect in CO2 reduction and H2 O oxidation through a combination of experimental and theoretical analyses, providing a fresh insight in optimizing photocatalytic system.

The Tandem Nitrate and CO2 Reduction for Urea Electrosynthesis: Role of Surface N-Intermediates in CO2 Capture and Activation.

Electrochemical reduction of CO2 and nitrate offers a promising avenue to produce valuable chemicals through the using of greenhouse gas and nitrogen-containing wastewater. However, the generally proposed reaction pathway of concurrent CO2 and nitrate reduction for urea synthesis requires the catalysts to be both efficient in both CO2 and nitrate reduction, thus narrowing the selection range of suitable catalysts. Herein, we demonstrate a distinct mechanism in urea synthesis, a tandem NO3 - and CO2 reduction, in which the surface amino species generated by nitrate reduction play the role to capture free CO2 and subsequent initiate its activation. When using the TiO2 electrocatalyst derived from MIL-125-NH2, it intrinsically exhibits low activity in aqueous CO2 reduction, however, in the presence of both nitrate and CO2, this catalyst achieves an excellent urea yield rate of 43.37 mmol ⋅ g-1 ⋅ h-1 and a Faradaic efficiency of 48.88 % at -0.9 V vs. RHE in a flow cell. Even at a low CO2 level of 15 %, the Faradaic efficiency of urea synthesis remains robust at 42.33 %. The tandem reduction procedure was further confirmed by in situ spectroscopies and theoretical calculations. This research provides new insights into the selection and design of electrocatalysts for urea synthesis.

Fe-N Co-Doped BiVO4 Photoanode with Record Photocurrent for Water Oxidation.

Bismuth vanadate ranks among the most promising photoanodes for photoelectrochemical water splitting. Nonetheless, slow charge separation and transport are key barriers to its photoefficiency. Here, we present a co-doping strategy that significantly improves the charge separation performance of BVO. Under standard one sun illumination, the Fe-N co-doped BVO photoanode (Fe-N-BVO) by N-coordinated Fe precursor reaches a record photocurrent density of 7.01 mA cm-2 at 1.23 V vs RHE after modified a surface co-catalyst. By contrast, much lower photocurrent density is obtained for the N-doped and Fe-doped BVO with separated N and Fe precursors. The detailed characterizations show that the high activity of the Fe-N-BVO is attributed to the enhanced photo-induced bulk charge separation and the accelerated surface water oxidation kinetics. XPS, EXAFS and DFT calculations clearly show that, instead of formation of deep trapping state in the individually doped BVO, the co-doping of Fe-N into BVO generates Fe-based electronic states just below the bottom of conduction band and N-derived states just above the top of valence band. Such modulations in electronic structure enable the efficient trap of the electrons and holes to enhance the separation of photo-induced carriers, but hinder the charge recombination originated from the deep trapping sites.

Fabrication of Two-Dimensional Platelets with Heat-Resistant Luminescence and Large Two-Photon Absorption Cross Sections via Cooperative Solution/Solid Self-Assembly.

The combination of solution self-assembly, which enables primary morphological control, and solid self-assembly, which enables the creation of novel properties, can lead to the formation of new functional materials that cannot be obtained using either technique alone. Herein, we report a cooperative solution/solid self-assembly strategy to fabricate novel two-dimensional (2D) platelets. Precursor 2D platelets with preorganized packing structure, shape, and size are formed via the living self-assembly of a donor-acceptor fluorophore and volatile coformer (i.e., propanol) in solution phase. After high-temperature annealing, propanol is released from the precursor platelets, and new continuous intermolecular hydrogen bonds are formed. The new 2D platelets formed retain the controllable morphologies originally defined by the solution phase living self-assembly but exhibit remarkable heat-resistant luminescence up to 200 °C and high two-photon absorption cross sections (i.e., >19,000 GM at 760 nm laser excitation).

Transition from Sequential to Concerted Proton-Coupled Electron Transfer of Water Oxidation on Semiconductor Photoanodes.

Accelerating proton transfer has been demonstrated as key to boosting water oxidation on semiconductor photoanodes. Herein, we study proton-coupled electron transfer (PCET) of water oxidation on five typical photoanodes [i.e., α-Fe2O3, BiVO4, TiO2, plasmonic Au/TiO2, and nickel-iron oxyhydroxide (Ni1-xFexOOH)-modified silicon (Si)] by combining the rate law analysis of H2O molecules with the H/D kinetic isotope effect (KIE) and operando spectroscopic studies. An unexpected and universal half-order kinetics is observed for the rate law analysis of H2O, referring to a sequential proton-electron transfer pathway, which is the rate-limiting factor that causes the sluggish water oxidation performance. Surface modification of the Ni1-xFexOOH electrocatalyst is observed to break this limitation and exhibits a normal first-order kinetics accompanied by much enhanced H/D KIE values, facilitating the turnover frequency of water oxidation by 1 order of magnitude. It is the first time that Ni1-xFexOOH is found to be a PCET modulator. The rate law analysis illustrates an effective strategy for modulating PCET kinetics of water oxidation on semiconductor surfaces.

Living Self-Assembly of Metastable and Stable Two-Dimensional Platelets from a Single Small Molecule.

This study reports the design of a donor-acceptor (D-A) molecule with two fluorene units on each side of a benzothiadiazole moiety, which allows multiple intermolecular interactions to compete with one another so as to induce the evolution of the metastable 2D platelets to the stable 2D platelets during the self-assembly of the D-A molecule. Importantly, the living seeded self-assembly of metastable and stable 2D structures with precisely controlled sizes can be conveniently achieved using an appropriate supersaturated level of a solution of the D-A molecule as the seeded growth medium that can temporarily hold the almost-proceeding spontaneous nucleation from competing with the seeded growth. The stable 2D platelets with smaller area sizes exhibit higher sensitivity to gaseous dimethyl sulfide, illustrating that the novel living self-assembly method provides more available functional structures with controlled sizes for practical applications. The key finding of this study is that the new living methodology is separated into two independent processes: the elaborate molecular design for various crystalline structures as seeds and the application of a supersaturated solution with appropriate levels as the growth medium to grow the uniform structures with controlled sizes; this would make convenient and possible the living seeded self-assembly of rich 1D, 2D, and 3D architectures.

Molecular-level Manipulation of Interface Charge Transfer on Plasmonic Metal/MOF Heterostructures.

Plasmon-excited hot carriers have drawn great attention for driving various chemical reactions, but the short lifetimes of hot carriers seriously restrict the performance of plasmonic photocatalysis. Constructing plasmonic metal/metal-organic framework (MOF) heterostructures has been proved as an effective strategy to extend the lifetimes of hot carriers. Due to the high molecular tunability of MOFs, the MOF substrate in plasmonic metal/MOF heterostructures is able to capture hot electrons on the conduction band of MOF and hot holes on its valence band, and thus offers an ideal platform to separately study the detailed mechanism of hot electron and hole transfer processes. This review focuses on a molecular-level understanding of both hot-electron and hot-hole transfer at plasmonic metal/MOF interfaces. The enhanced stability and photocatalytic performance by introducing MOF substrates are discussed for plasmonic metal/MOF heterostructures. Additionally, typical characterization technologies are also proposed as powerful tools for tracking hot carrier transfer process.

Direct Formation of Electronic Excited NO2 Contributes to the High Yield of HONO during Photosensitized Renoxification.

Photosensitized renoxification of HNO3 is found to produce HONO in an unexpectedly high yield, which has been considered an important source for atmospheric HONO. Conventionally, the production of HONO is ascribed to the secondary photolysis of the primarily formed NO2. In this study, by using humic acid (HA) as a model environmental photosensitizer, we provide evidence of the direct formation of NO2 in its electronic excited state (NO2*) as a key intermediate during the photosensitizing renoxification of HNO3. Moreover, the high HONO yield originates from the heterogeneous reaction of the primarily formed NO2* with the co-adsorbed water molecules on HA. Such a mechanism is supported by the increase of the product selectivity of HONO with relative humidity. Further luminescence measurements demonstrate clearly the occurrence of an electronic excited state (NO2*) from photolysis of adsorbed HNO3 on HA. This work deepens our understanding of the formation of atmospheric HONO and gives insight into the transformation of RNS.

Rapid Redox Cycling of Fe(II)/Fe(III) in Microdroplets during Iron-Citric Acid Photochemistry.

Fe(III) and carboxylic acids are common compositions in atmospheric microdroplet systems like clouds, fogs, and aerosols. Although photochemical processes of Fe(III)-carboxylate complexes have been extensively studied in bulk aqueous solution, relevant information on the dynamic microdroplet system, which may be largely different from the bulk phase, is rare. With the help of the custom-made ultrasonic-based dynamic microdroplet photochemical system, this study examines the photochemical process of Fe(III)-citric acid complexes in microdroplets for the first time. We find that when the degradation extent of citric acid is similar between the microdroplet system and the bulk solution, the significantly lower Fe(II) ratio is present in microdroplet samples due to the rapider reoxidation of photogenerated Fe(II). However, by replacing citric acid with benzoic acid, no much difference in the Fe(II) ratio between microdroplets and bulk solution is observed, which indicates distinct reoxidation pathways of Fe(II). Moreover, the presence of •OH scavenger, namely, methanol, greatly accelerates the reoxidation of photogenerated Fe(II) in both citric acid and benzoic acid situations. Further experiments reveal that the high availability of O2 and the citric acid- or methanol-derived carbon-centered radicals are responsible for the rapider reoxidation of Fe(II) in iron-citric acid microdroplets by prolonging the length of HO2•- and H2O2-involved radical reaction chains. The results in this study may provide a new understanding about iron-citric acid photochemistry in atmospheric liquid particles, which can further influence the photoactivity of particles and the formation of secondary organic aerosols.

Strong Spin Polarization Effect of Atomically Dispersed Metal Site Boosts the Selective Photocatalytic Nitrobenzene Hydrogenation to Aniline over Graphitic Carbon Nitride.

Atomically dispersed catalysts (ADCs) with a well-defined structure are theoretically desirable for a high-selectivity photocatalytic reaction. However, achieving high product selectivity remains a practical challenge for ADCs-based photocatalysts. Herein, we reveal a spin polarization effect on achieving high product selectivity (95.0%) toward the photocatalytic nitrobenzene (PhNO2) hydrogenation to aniline (PhNH2) on atomically dispersed Fe site-loaded graphitic carbon nitride (Fe/g-C3N4). In combination with the Gibbs free energy diagram and electronic structure analysis, the origin of the photocatalytic performance is attributed not only to the strong metal-support interaction between the Fe site and g-C3N4, but more importantly to the strong spin polarization effect that promotes the potential-determining step (PDS) of *PhNO to *PhNOH. This work could be helpful for the design of ADCs-based photocatalysts in view of the spin polarization effect.