Expression of N-Terminal Cysteine Aß42 and Conjugation to Generate Fluorescent and Biotinylated Aß42.

Fluorescent derivatives of the ß-amyloid peptides (Aß) are valuable tools for studying the interactions of Aß with cells. Facile access to labeled expressed Aß offers the promise of Aß with greater sequence and stereochemical integrity, without impurities from amino acid deletion and epimerization. Here, we report methods for the expression of Aß42 with an N-terminal cysteine residue, Aß(C1-42), and its conjugation to generate Aß42 bearing fluorophores or biotin. The methods rely on the hitherto unrecognized observation that expression of the Aß(MC1-42) gene yields the Aß(C1-42) peptide, because the N-terminal methionine is endogenously excised by Escherichia coli. Conjugation of Aß(C1-42) with maleimide-functionalized fluorophores or biotin affords the N-terminally labeled Aß42. The expression affords ∼14 mg of N-terminal cysteine Aß from 1 L of bacterial culture. Subsequent conjugation affords ∼3 mg of labeled Aß from 1 L of bacterial culture with minimal cost for labeling reagents. High-performance liquid chromatography analysis indicates the N-terminal cysteine Aß to be >97% pure and labeled Aß peptides to be 94-97% pure. Biophysical studies show that the labeled Aß peptides behave like unlabeled Aß and suggest that labeling of the N-terminus does not substantially alter the properties of the Aß. We further demonstrate applications of the fluorophore-labeled Aß peptides by using fluorescence microscopy to visualize their interactions with mammalian cells and bacteria. We anticipate that these methods will provide researchers convenient access to useful N-terminally labeled Aß, as well as Aß with an N-terminal cysteine that enables further functionalization.

Collective topo-epitaxy in the self-assembly of a 3D quantum dot superlattice.

Epitaxially fused colloidal quantum dot (QD) superlattices (epi-SLs) may enable a new class of semiconductors that combine the size-tunable photophysics of QDs with bulk-like electronic performance, but progress is hindered by a poor understanding of epi-SL formation and surface chemistry. Here we use X-ray scattering and correlative electron imaging and diffraction of individual SL grains to determine the formation mechanism of three-dimensional PbSe QD epi-SL films. We show that the epi-SL forms from a rhombohedrally distorted body centred cubic parent SL via a phase transition in which the QDs translate with minimal rotation (~10°) and epitaxially fuse across their {100} facets in three dimensions. This collective epitaxial transformation is atomically topotactic across the 103-105 QDs in each SL grain. Infilling the epi-SLs with alumina by atomic layer deposition greatly changes their electrical properties without affecting the superlattice structure. Our work establishes the formation mechanism of three-dimensional QD epi-SLs and illustrates the critical importance of surface chemistry to charge transport in these materials.

A Reusable CNT-Supported Single-Atom Iron Catalyst for the Highly Efficient Synthesis of C-N Bonds.

C-N bond formation is regarded as a very useful and fundamental reaction for the synthesis of nitrogen-containing molecules in both organic and pharmaceutical chemistry. Noble-metal and homogeneous catalysts have frequently been used for C-N bond formation, however, these catalysts have a number of disadvantages, such as high cost, toxicity, and low atom economy. In this work, a low-toxic and cheap iron complex (iron ethylene-1,2-diamine) has been loaded onto carbon nanotubes (CNTs) to prepare a heterogeneous single-atom catalyst (SAC) named Fe-Nx /CNTs. We employed this SAC in the synthesis of C-N bonds for the first time. It was found that Fe-Nx /CNTs is an efficient catalyst for the synthesis of C-N bonds starting from aromatic amines and ketones. Its catalytic performance was excellent, giving yields of up to 96 %, six-fold higher than the yields obtained with noble-metal catalysts, such as AuCl3 /CNTs and RhCl3 /CNTs. The catalyst showed efficacy in the reactions of thirteen aromatic amine substrates, without the need for additives, and seventeen enaminones were obtained. High-angle annular dark-field scanning transmission electron microscopy in combination with X-ray absorption spectroscopy revealed that the iron species were well dispersed in the Fe-Nx /CNTs catalyst as single atoms and that Fe-Nx might be the catalytic active species. This Fe-Nx /CNTs catalyst has potential industrial applications as it could be cycled seven times without any significant loss of activity.

Personalized Nanotherapy by Specifically Targeting Cell Organelles To Improve Vascular Hypertension.

Ciliopathies caused by abnormal function of primary cilia include expanding spectrum of kidney, liver, and cardiovascular disorders. There is currently no treatment available for patients with cilia dysfunction. Therefore, we generated and compared two different (metal and polymer) cilia-targeted nanoparticle drug delivery systems (CTNDDS), CT-DAu-NPs and CT-PLGA-NPs, for the first time. These CTNDDS loaded with fenoldopam were further compared to fenoldopam-alone. Live-imaging of single-cell-single-cilium analysis confirmed that CTNDDS specifically targeted to primary cilia. While CTNDDS did not show any advantages over fenoldopam-alone in cultured cells in vitro, CTNDDS delivered fenoldopam more superior than fenoldopam-alone by eliminating the side effect of reflex tachycardia in murine models. Although slow infusion was required for fenoldopam-alone in mice, bolus injection was possible for CTNDDS. Though there were no significant therapeutic differences between CT-DAu-NPs and CT-PLGA-NPs, CT-PLGA-NPs tended to correct ciliopathy parameters closer to normal physiological levels, indicating CT-PLGA-NPs were better cargos than CT-DAu-NPs. Both CTNDDS showed no systemic adverse effect. In summary, our studies provided scientific evidence that existing pharmacological agent could be personalized with advanced nanomaterials to treat ciliopathy by targeting cilia without the need of generating new drugs.

Synaptic Resistor Circuits Based on Al Oxide and Ti Silicide for Concurrent Learning and Signal Processing in Artificial Intelligence Systems.

Neurobiological circuits containing synapses can process signals while learning concurrently in real time. Before an artificial neural network (ANN) can execute a signal-processing program, it must first be programmed by humans or trained with respect to a large and defined data set during learning processes, resulting in significant latency, high power consumption, and poor adaptability to unpredictable changing environments. In this work, a crossbar circuit of synaptic resistors (synstors) is reported, each synstor integrating a Si channel with an Al oxide memory layer and Ti silicide Schottky contacts. Individual synstors are characterized and analyzed to understand their concurrent signal-processing and learning abilities. Without any prior training, synstor circuits concurrently execute signal processing and learning in real time to fly drones toward a target position in an aerodynamically changing environment faster than human controllers, and with learning speed, performance, power consumption, and adaptability to the environment significantly superior to an ANN running on computers. The synstor circuit provides a path to establish power-efficient intelligent systems with real-time learning and adaptability in the capriciously mutable real world.

Analysis of microplastics released from plastic take-out food containers based on thermal properties and morphology study.

Plastic take-out food containers may release microplastics (MPs) into food and pose a potential risk to food safety and human health. Here, after being subjected to hot water treatment, MPs released from three types of plastic food containers (polypropylene, PP; polyethylene, PE; expanded polystyrene, EPS) were identified by micro-Raman spectroscopy. The results showed that the size of released MPs ranged from 0.8-38 µm and over 96% MPs were smaller than 10 µm. Various MPs concentrations were found from the three types of containers, that is, 1.90 × 104, 1.01 × 105, and 2.82 × 106 particles/L on average from PP, PE, and EPS, respectively. Moreover, based on thermal and morphology analysis, we discovered that both relaxations of the polymer chains in the rubbery state and defects caused by processing techniques might contribute to the release of MPs. Thus, such release can be reduced by increasing the thermal stability of the materials and mitigating the defects generated during production.

Migration of mineral oil hydrocarbons from food contact papers into food simulants and extraction from their raw materials.

To determine the occurrence of mineral oil hydrocarbons (MOH) in food contact papers in China, and to investigate the potential sources of MOH contamination, a total of 159 food contact papers and raw materials were analysed by off-line solid-phase extraction-gas chromatography flame ionisation detection (SPE-GC-FID) and a GC-MS method. The migration of MOH from food contact papers into Tenax, olive oil or 50% ethanol under the worst foreseeable conditions of use was determined. The results indicated that the occurrence of MOH in China is of a potential health risk concerning the migration of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) which were detected in 82.6% and 50.4% of samples, respectively. Migration of MOSH from 47.9% of samples was higher than 2 mg/kg and migration of MOAH from 32.2% samples exceeded 0.5 mg/kg in case of the worst foreseeable condition of use. The highest mean migration of MOSH and MOAH were found in packaging papers for long-term storage (more than 6 months), with mean migration of 91.2 mg/kg and 1.4 mg/kg, respectively. Migration of MOH from printed paper was considerably higher than that of unprinted paper, validating previous findings that the printing ink is the predominant source of MOH contamination in food contact papers. Migration of MOH from paper bowls used for packing instant noodles was relatively low, suggesting the internal hollow layer may be acting as a functional barrier that could block the transfer of MOH (up to C28) through the gas phrase, even though the outer layer was made from recycled paper. High concentrations of MOSH and MOAH were also detected in de-foamers, adhesives and rosin sizing agents, indicating that the MOH contamination caused by the use of raw materials and additives should also be taken into consideration.

Shape-enhanced photocatalytic activity of single-crystalline anatase TiO(2) (101) nanobelts.

Particle size is generally considered to be the primary factor in the design of nanocrystal photocatalysts, because the reduction of particle size increases the number of active sites. However, the benefit from the size reduction can be canceled by a higher electron-hole recombination rate due to the confined space in sphere-shaped nanoparticles. Here we report a mechanistic study on a novel nanobelt structure that overcomes the drawback of sphere-shaped nanoparticles. Single-crystalline anatase TiO(2) nanobelts with two dominant surfaces of (101) facet exhibit enhanced photocatalytic activity over the nanosphere counterparts with an identical crystal phase and similar specific surface area. The ab initio density functional theory (DFT) calculations show that the exposed (101) facet of the nanobelts yields an enhanced reactivity with molecular O(2), facilitating the generation of superoxide radical. Moreover, the nanobelts exhibit a lower electron-hole recombination rate than the nanospheres due to the following three reasons: (i) greater charge mobility in the nanobelts, which is enabled along the longitudinal dimension of the crystals; (ii) fewer localized states near the band edges and in the bandgap due to fewer unpassivated surface states in the nanobelts; and (iii) enhanced charge separation due to trapping of photogenerated electrons by chemisorbed molecular O(2) on the (101) facet. Our results suggest that the photocatalysis efficiency of nanocrystals can be significantly improved by tailoring the shape and the surface structure of nanocrystals, which provides a new concept for rational design and development of high-performance photocatalysts.

Pressure-induced amorphization in silicon caused by the impact of electrosprayed nanodroplets.

This Letter describes the shock-induced amorphization of single-crystal Si bombarded by nanodroplets. At impact velocities of several kilometers per second, the projectiles trigger strong compression pulses lasting tens of picoseconds. The phase transition, confirmed via transmission electron microscopy and electron backscatter diffraction, takes place when the projectile's stagnation pressure is approximately 15 GPa. We speculate that the amorphization results either from the decompression of the ß-Sn phase or during the compression of the diamond phase.

[Study of serum thyroid hormone levels changes in perioperation patients accepted coronary artery bypass grafts].

OBJECTIVE: To clarify the change of serum thyroid hormone levels during perioperation period of coronary artery bypass grafts (CABG). METHODS: The levels of serum thyroid hormones (TT(3), TT(4), FT(3), FT(4), TSH, rT(3)) were measured by chemical-luminal and RIA in 62 patients at certain time in perioperation period, as well as 30 normal volunteers on a fasting basis. SPSS 10.0 was used for statistic analysis. RESULTS: The levels of serum thyroid hormones had no significant difference between controls and patients before CABG. At 10 min and 60 min after giving heparin, serum TT(4), FT(4) levels in patients during operation elevated significantly than before (P < 0.01), however, at 2 h after operation, serum TT(3), TT(4), FT(3), FT(4), rT(3), TSH levels had no significant changes. Serum TT(3), TT(4), FT(3), FT(4), TSH levels at 24 h and 72 h after operation were significantly lower in patients than before CABG (P < 0.01). Especially at 24 h, serum TT(3), FT(3) levels decreased by 52.7% and 46.6% than before respectively, while serum rT(3) levels increased significantly (P < 0.01) and serum TT(3), rT(3) levels decreased significantly (P < 0.01). The serum TT(4), FT(3), FT(4), TSH levels didn't return to normal at 7 d after operation. CONCLUSION: Elevated serum TT(4), FT(4) levels are present in acute period in patients accepted CABG. Decreased serum T(3) and FT(3) levels after CABG may indicate a bad prediction.

Ciliotherapy: Remote Control of Primary Cilia Movement and Function by Magnetic Nanoparticles.

Patients with polycystic kidney disease (PKD) are characterized with uncontrolled hypertension. Hypertension in PKD is a ciliopathy, an abnormal function and/or structure of primary cilia. Primary cilia are cellular organelles with chemo and mechanosensory roles. In the present studies, we designed a cilia-targeted (CT) delivery system to deliver fenoldopam specifically to the primary cilia. We devised the iron oxide nanoparticle (NP)-based technology for ciliotherapy. Live imaging confirmed that the CT-Fe2O3-NPs specifically targeted primary cilia in cultured cells in vitro and vascular endothelia in vivo. Importantly, the CT-Fe2O3-NPs enabled the remote control of the movement and function of a cilium with an external magnetic field, making the nonmotile cilium exhibit passive movement. The ciliopathic hearts displayed hypertrophy with compromised functions in left ventricle pressure, stroke volume, ejection fraction, and overall cardiac output because of prolonged hypertension. The CT-Fe2O3-NPs significantly improved cardiac function in the ciliopathic hypertensive models, in which the hearts also exhibited arrhythmia, which was corrected with the CT-Fe2O3-NPs. Intraciliary and cytosolic Ca2+ were increased when cilia were induced with fluid flow or magnetic field, and this served as a cilia-dependent mechanism of the CT-Fe2O3-NPs. Fenoldopam-alone caused an immediate decrease in blood pressure, followed by reflex tachycardia. Pharmacological delivery profiles confirmed that the CT-Fe2O3-NPs were a superior delivery system for targeting cilia more specifically, efficiently, and effectively than fenoldopam-alone. The CT-Fe2O3-NPs altered the mechanical properties of nonmotile cilia, and these nano-biomaterials had enormous clinical potential for ciliotherapy. Our studies further indicated that ciliotherapy provides a possibility toward personalized medicine in ciliopathy patients.

Anti-sense oligonucleotide labeled with technetium-99m using hydrazinonictinamide derivative and N-hydroxysuccinimidyl S-acetylmercaptoacetyltriglycline: a comparison of radiochemical behaviors and biological properties.

AIM: To explore and compare the radiochemical behavior and biological property of anti-sense oligonuc-leotide (ASON) labeled with technetium-99m using N-hydroxysuccinimidyl S-acetylmercaptoacetyltriglycline (NHS-MAG(3)) and hydrazinonictinamide derivative (HYNIC). METHODS: After HYNIC and NHS-MAG(3) were synthesized, ASON was labeled with technetium-99m using HYNIC and NHS-MAG(3) as a bifunctional chelator. The in vivo and in vitro stability, binding rates of labeled compounds to serum albumen, biodistribution of (99m)Tc-MAG(3)-ASON and (99m)Tc-HYNIC-ASON in BALB/C mouse and its HT29 tumor cellular uptake were compared. RESULTS: The labeling efficiency and stability of (99m)Tc-MAG(3)-ASON were significantly higher than those of (99m)Tc-HYNIC-ASON (P = 0.02, and P = 0.03, respectively). (99m)Tc-MAG(3)-ASON had a significantly lower rate of binding to serum albumen than (99m)Tc-HYNIC-ASON (P < 0.05). In contrast to (99m)Tc-HYNIC-ASON, the biodistribution of (99m)Tc-MAG(3)-ASON was significantly lower in blood, heart, liver and stomach (P < 0.05), slightly lower in intestines and spleen (P > 0.05) and significantly higher in lung and kidney (P < 0.05). The HT29 tumor cellular uptake rate of (99m)Tc-MAG(3)-ASON was significantly higher than that of (99m)Tc-HYNIC-ASON (P < 0.05). CONCLUSION: (99m)Tc-MAG(3)-ASON shows superior radiochemical behaviors and biological properties than (99m)Tc-HYNIC-ASON. (99m)Tc-MAG(3)-ASON is a potential radiopharmaceutical agent for in vivo application.

Proximity effects across oxide-interfaces of superconductor-insulator-ferromagnet hybrid heterostructure.

A case study of electron tunneling or charge-transfer-driven orbital ordering in superconductor (SC)-ferromagnet (FM) interfaces has been conducted in heteroepitaxial YBa2Cu3O7(YBCO)/La0.67Sr0.33MnO3(LSMO) multilayers interleaved with and without an insulating SrTiO3(STO) layer between YBCO and LSMO. X-ray magnetic circular dichroism experiments revealed anti-parallel alignment of Mn magnetic moments and induced Cu magnetic moments in a YBCO/LSMO multilayer. As compared to an isolated LSMO layer, the YBCO/LSMO multilayer displayed a (50%) weaker Mn magnetic signal, which is related to the usual proximity effect. It was a surprise that a similar proximity effect was also observed in a YBCO/STO/LSMO multilayer, however, the Mn signal was reduced by 20%. This reduced magnetic moment of Mn was further verified by depth sensitive polarized neutron reflectivity. Electron energy loss spectroscopy experiment showed the evidence of Ti magnetic polarization at the interfaces of the YBCO/STO/LSMO multilayer. This crossover magnetization is due to a transfer of interface electrons that migrate from Ti(4+)-δ to Mn at the STO/LSMO interface and to Cu2+ at the STO/YBCO interface, with hybridization via O 2p orbitals. So charge-transfer driven orbital ordering is the mechanism responsible for the observed proximity effect and Mn-Cu anti-parallel coupling in YBCO/STO/LSMO. This work provides an effective pathway in understanding the aspect of long range proximity effect and consequent orbital degeneracy parameter in magnetic coupling.

Enhanced photocatalytic activity of TiO2 by surface fluorination in degradation of organic cationic compound.

Experiments were carried out to investigate the influence of TiO2 surface fluorination on the photodegradation of a representative organic cationic compound, Methylene Blue (MB). The electropositive MB shows poor adsorption on TiO2 surface; its degradation performs a HO-radical-mediated mechanism. In the F-modified system, the kinetic reaction rate enlarged more than 2.5 fold that was attributed mainly to the accumulating adsorption of MB and the increased photogenerated hole available on the F-modified TiO2 surface.

Role of the reduction site in the fluorinated or sulfated TiO2 photocatalytic process.

In this article, the effects of TiO2 surface fluorination and sulfation, on the active oxygen species formed at the reduction site in the photocatalytic process, namely O2*- and H2O2, were investigated from a new perspective. The superoxide radical, (O2*-), was determined by colorimetry of nitroblue tetrazolium, a prominent O2*- scavenger. Hydrogen peroxide (H2O2) was estimated by using the iodide-starch method. In the naked TiO2 photocatalysis, O2*-, though less reactive, was a very important intermediate. When the TiO2 surface was fluorinated, more O2*- and H2O2 were produced, which indicated that the surface modification could greatly reduce the recombination of photogenerated electrons and holes, thus enhancing the photocatalytic rate. In the sulfated system, photocatalysis proceeded with a more complicated mechanism. These results added support to the view of fluoride-induced enhancement and sulfide's nonappreciable inhibition effect.

Self-assembled Cubic Boron Nitride Nanodots.

One of the low-dimensional Boron Nitride (BN) forms, namely, cubic-BN (c-BN) nanodots (NDs), offers a variety of novel opportunities in battery, biology, deep ultraviolet light emitting diodes, sensors, filters, and other optoelectronic applications. To date, the attempts towards producing c-BN NDs were mainly performed under extreme high-temperature/high-pressure conditions and resulted in c-BN NDs with micrometer sizes, mixture of different BN phases, and containing process-related impurities/contaminants. To enhance device performance for those applications by taking advantage of size effect, pure, sub-100 nm c-BN NDs are necessary. In this paper, we report self-assembled growth of c-BN NDs on cobalt and nickel substrates by plasma-assisted molecular beam epitaxy. It is found that the nucleation, formation, and morphological properties of c-BN NDs can be closely correlated with the nature of substrate including catalysis effect, lattice-mismatch-induced strain, and roughness, and growth conditions, in particular, growth time and growth temperature. The mean lateral size of c-BN NDs on cobalt scales from 175 nm to 77 nm with the growth time. The growth mechanism of c-BN NDs on metal substrates is concluded to be Volmer-Weber (VW) mode. A simplified two-dimensional numerical modeling shows that the elastic strain energy plays a key role in determining the total formation energy of c-BN NDs on metals.

Publisher Correction: Atomic-scale engineering of ferroelectric-ferromagnetic interfaces of epitaxial perovskite films for functional properties.

A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.

Atomic-scale engineering of ferroelectric-ferromagnetic interfaces of epitaxial perovskite films for functional properties.

Besides epitaxial mismatch that can be accommodated by lattice distortions and/or octahedral rotations, ferroelectric-ferromagnetic interfaces are affected by symmetry mismatch and subsequent magnetic ordering. Here, we have investigated La0.67 Sr0.33 MnO3 (LSMO) samples with varying underlying unit cells (uc) of BaTiO3 (BTO) layer on (001) and (110) oriented substrates in order to elucidate the role of symmetry mismatch. Lattice mismatch for 3 uc of BTO and symmetry mismatch for 10 uc of BTO, both associated with local MnO6 octahedral distortions of the (001) LSMO within the first few uc, are revealed by scanning transmission electron microscopy. Interestingly, we find exchange bias along the in-plane [110]/[100] directions only for the (001) oriented samples. Polarized neutron reflectivity measurements confirm the existence of a layer with zero net moment only within (001) oriented samples. First principle density functional calculations show that even though the bulk ground state of LSMO is ferromagnetic, a large lattice constant together with an excess of La can stabilize an antiferromagnetic LaMnO3-type phase at the interface region and explain the experimentally observed exchange bias. Atomic scale tuning of MnO6 octahedra can thus be made possible via symmetry mismatch at heteroepitaxial interfaces. This aspect can act as a vital parameter for structure-driven control of physical properties.