RESUMO
Most metals adopt simple structures such as body-centered cubic (BCC), face-centered cubic (FCC), and hexagonal close-packed (HCP) structures in specific groupings across the periodic table, and many undergo transitions to surprisingly complex structures on compression, not expected from conventional free-electron-based theories of metals. First-principles calculations have been able to reproduce many observed structures and transitions, but a unified, predictive theory that underlies this behavior is not yet in hand. Discovered by analyzing the electronic properties of metals in various lattices over a broad range of sizes and geometries, a remarkably simple theory shows that the stability of metal structures is governed by electrons occupying local interstitial orbitals and their strong chemical interactions. The theory provides a basis for understanding and predicting structures in solid compounds and alloys over a broad range of conditions.
RESUMO
BACKGROUND: DNMT3A is a crucial epigenetic regulation enzyme. However, due to its heterogeneous nature and frequent mutation in various cancers, the role of DNMT3A remains controversial. Here, we determine the role of DNMT3A in non-small cell lung cancer (NSCLC) to identify potential treatment strategies. METHODS: To investigate the role of loss-of-function mutations of DNMT3A in NSCLC, CRISPR/Cas9 was used to induce DNMT3A-inactivating mutations. Epigenetic inhibitor library was screened to find the synthetic lethal partner of DNMT3A. Both pharmacological inhibitors and gene manipulation were used to evaluate the synthetic lethal efficacy of DNMT3A/KDM1A in vitro and in vivo. Lastly, MS-PCR, ChIP-qPCR, dual luciferase reporter gene assay and clinical sample analysis were applied to elucidate the regulation mechanism of synthetic lethal interaction. RESULTS: We identified DNMT3A is a tumour suppressor gene in NSCLC and KDM1A as a synthetic lethal partner of DNMT3A deletion. Both chemical KDM1A inhibitors and gene manipulation can selectively reduce the viability of DNMT3A-KO cells through inducing cell apoptosis in vitro and in vivo. We clarified that the synthetic lethality is not only limited to the death mode, but also involved into tumour metastasis. Mechanistically, DNMT3A deficiency induces KDM1A upregulation through reducing the methylation status of the KDM1A promoter and analysis of clinical samples indicated that DNMT3A expression was negatively correlated with KDM1A level. CONCLUSION: Our results provide new insight into the role of DNMT3A in NSCLC and elucidate the mechanism of synthetic lethal interaction between KDM1A and DNMT3A, which might represent a promising approach for treating patients with DNMT3A-deficient tumours.
Assuntos
Carcinoma Pulmonar de Células não Pequenas , DNA (Citosina-5-)-Metiltransferases , DNA Metiltransferase 3A , Neoplasias Pulmonares , Carcinoma Pulmonar de Células não Pequenas/genética , Carcinoma Pulmonar de Células não Pequenas/tratamento farmacológico , Carcinoma Pulmonar de Células não Pequenas/patologia , Humanos , Neoplasias Pulmonares/genética , Neoplasias Pulmonares/tratamento farmacológico , Neoplasias Pulmonares/patologia , Animais , Camundongos , DNA (Citosina-5-)-Metiltransferases/genética , DNA (Citosina-5-)-Metiltransferases/antagonistas & inibidores , Histona Desmetilases/genética , Histona Desmetilases/metabolismo , Histona Desmetilases/antagonistas & inibidores , Linhagem Celular Tumoral , Apoptose , Ensaios Antitumorais Modelo de Xenoenxerto , Regulação Neoplásica da Expressão Gênica , FemininoRESUMO
A comprehensive investigation of two new molecular triads incorporating the diketopyrrolopyrrole unit into a quinoidized thienothiophene skeleton, which is further end-capped with dicyanomethylene (DPP-TT-CN) or phenoxyl groups (DPP-TT-PhO), has been carried out. A combination of UV-Vis-NIR and infrared spectroelectrochemical techniques and cryogenic UV-Vis-NIR absorption spectroscopy supported by theoretical calculations has been used. The main result is the formation of similar H-aggregates in the dimerization process of the neutral molecules and of the charged anionic species. The experimental absorption spectra of the aggregated species are accurately reproduced by quantum chemical calculations using the Spano's model, including excitonic coupling for the dimeric forms and full vibronic resolution of the absorption bands. The strong excitonic coupling taking place is key to understand the electronic structure of the dimeric aggregates and has been instrumental to disentangle the type of H-aggregation. This study is of relevance to get a better understanding of the molecular aggregation of organic p-conjugated chromophores and is useful as a guideline for the refinement of the engineering of molecular materials for which supramolecular design is required.
RESUMO
A combined experimental and theoretical study focused on the elucidation of the polymerization mechanism of the crystal monomer to crystal polymer reaction of a bisindenedione compound in the solid state. The experimental description and characterization of the polymer product have been reported elsewhere and, in this article, we address the first detailed description of the polymerization process. This reaction pathway consists of the initial formation of a triplet excimer state that relaxes to an intermolecularly bonded triplet state that is the starting point of the propagation step of the polymerization. The overall process can be visualized in the monomer starting state as an open zipper in which a cursor or slider is formed by light absorption and the whole zipper is then closed by propagation of the cursor. To this end, variable-temperature electron spin resonance (ESR), femtosecond transient absorption spectroscopy, and vibrational Raman spectroscopic data have been implemented in combination with quantum chemical calculations. The presented mechanistic insight is of great value to understand the intricacies of such an important reaction and to envisage and diversify the products produced thereof.
RESUMO
Diradicals based on the Blatter units and connected by acetylene and alkene spacers have been prepared. All the molecules show sizably large diradical character and low energy singlet-triplet gaps. Their photo-physical properties concerning their lowest energy excited state have been studied in detail by steady-state and time-resolved absorption spectroscopy. We have fully identified the main optical absorption band and full absence of emission from the lowest energy excited state. A computational study has been also carried out that has helped to identify the presence of a conical intersection between the lowest energy excited state and the ground state which produces a highly efficient light-to-heat conversion of the absorbed radiation. Furthermore, an outstanding photo-thermal conversion 77.23 % has been confirmed, close to the highest in the diradicaloid field. For the first time, stable diradicals are applied to photo-thermal therapy of tumor cells with good stability and satisfactory performance at near-infrared region.
RESUMO
Understanding the relationship between chemical structure and photoswitching property of donor-acceptor Stenhouse adducts (DASAs) is necessary for developments and applications of the novel photoresponsive molecule. In the current work, we demonstrated a close relationship between the length of carbon spacer and photoswitching property of DASAs. A series of DASAs with barbituric acid substituted electron-withdrawing part and N-methylaniline substituted electron-donating part were synthesized. With shortening the carbon spacer between the phenyl and amine groups in the electron-donating part, the efficiency and rate of the light-induced linear-to-cyclic isomerization are improved in all the test solvents. The molecular energy variation during the isomerization process was investigated by density functional theory calculation to further understand the mechanism. This work provides a reliable carbon spacer strategy to control the photoswitching behavior of DASAs using chemical methods.
RESUMO
One key limitation of artificial skin-like materials is the shortened service life caused by mechanical damages during practical applications. The ability to self-heal can effectively extend the material service life, reduce the maintenance cost, and ensure safety. Therefore, it is important and necessary to fabricate materials with simultaneously mechanical and electrical self-healing behavior in a facile and convenient way. Herein, we report a stretchable and conductive self-healing elastomer based on intermolecular networks between poly(acrylic acid) (PAA) and reduced graphene oxide (rGO) through a facile and convenient postreduction and one-pot method. The introduction of rGO provides the PAA-GO elastomers with good mechanical stability and electrical properties. Moreover, this material exhibited both electrical and mechanical self-healing properties. After cutting, the elastomers self-healed quickly (â¼30 s) and efficiently (â¼95%) at room temperature. The elastomers were accurate and reliable in detecting external strain even after healing. The elastomers were further applied for strain sensors, which were attached directly to human skin to monitor external movements, including finger bending and wrist twisting.
RESUMO
We present a fiber-optic photoacoustic (PA) sensor for remote monitoring of gas micro-leakage. The gas sensing head is a miniature ferrule-top PA cavity with a cantilever beam. Gas diffuses into the cavity from the gap around the cantilever beam, and a small hole opens on the side wall. The volume of the optimized PA cavity is only 70 µL. An erbium-doped fiber amplified laser is used as a light source of acoustic excitation. The PA pressure signal is obtained by measuring the deflection of the cantilever beam with a fiber-optic white-light interferometric readout. The experimental result of leaking acetylene (C2H2) gas measurement shows a real-time response of 11.2 s. A detection limit is achieved to be 20 ppb with a 1 s lock-in integration time and a 1 km conductive fiber. Since both the excitation light and probe light are transmitted by the optical fiber, the designed sensing system has the advantages of remote detection and intrinsic safety.
RESUMO
In the present research, novel tri-block-copolymers bearing polyethylene glycol (PEG), azobenzene (Azo), and tetra-ortho-methoxy-substituted Azo (mAzo) segments are synthesized and explored. Light-controlled PEG-PmAzo-PAzo self-assemblies switching between multi-stationary states is realized. Under controlling of UV, blue, green, and red light, PEG-PmAzo-PAzo isomerize between 4 photostationary states. The enrichment of cis isomers of Azo and mAzo induces the self-assembly of PEG-PmAzo-PAzo in toluene. The morphologies and scale of the self-assemblies can be switched between four stationary states, which are investigated by dynamic light scattering, scanning electron microscopy, and transmission electron microscopy.
Assuntos
Luz , Polímeros/química , Compostos Azo/química , Difusão Dinâmica da Luz , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Polietilenoglicóis/químicaRESUMO
In this report, we designed surfaces with reversible green-light-switched wettability via donor-acceptor Stenhouse adducts (DASAs). Photoresponsive micro/nanoparticles were prepared by coating the surfaces of silica micro/nanoparticles with polydopamine and then postmodifying with DASA molecules. Then, the particles were immobilized on a glass substrate surfaces either with double-sided adhesive tape or cross-linking poly(dimethylsiloxane). Silica micro/nanoparticles with various diameters (0.2, 2.5, and 85 µm) were used to fabricate the photoresponsive surface. Green light irradiation switches the hydrophobic linear DASA to a hydrophilic cyclic isomer, which further increases the wettability and contact angle hysteresis on the surface. On the other hand, heating (100 °C) induces the cyclic-to-linear isomerization of DASA molecules and switches the surface back to hydrophobic. The wettability of the DASA-modified surface is reversible under alternate green light irradiation and heating.
RESUMO
Two pairs of polymer donor materials based on indacenodithiophene (IDT) and indacenodithieno[3,2-b]thiophene (IDTT) as the donor units are synthesized. Thiophene or selenophene is introduced as the π-bridge units and electron-deficient fluorine-substituted quinoxaline is used as acceptor unit. Selenophene-containing polymers PIDT-DFQ-Se and PIDTT-DFQ-Se show redshifted absorption and narrower bandgaps. Combined with IDTT donor unit, PIDTT-DFQ-Se shows the highest absorption coefficient. Both the IDTT unit and selenophene unit have positive effects on the hole mobilities, making PIDTT-DFQ-Se the highest one. The best power conversion efficiency of 7.4% is obtained from devices based on PIDTT-DFQ-Se:[6,6]-phenyl C71 butyric acid methyl ester (PC71 BM) with a Jsc of 12.6 mA cm-2 , a Voc of 0.89 V, and a fill factor (FF) of 0.66.
Assuntos
Compostos Organosselênicos/química , Polímeros/química , Energia Solar , Tiofenos/química , Estrutura Molecular , Polímeros/síntese químicaRESUMO
We report the synthesis, characterization, and application of novel zwitterions. The zwitterionic structures consist of a positively charged cyanine and negatively charged dienolate moieties, confirmed by experimental observations and theoretical calculations. Single crystal X-ray studies revealed that BIT-(NPh)2 is a coplanar molecule that forms 1-D chains via π-π interactions. In contrast, BIT-(NHexyl)2 is a twisted molecule with a dihedral angle of 78° between the charged planes. In charge transport studies, thin films of the flat zwitterion show semiconducting properties, with a hole mobility of 2.1 × 10(-4) cm(2) V(-1) s(-1) while the twisted zwitterion is a high resistivity insulator.
RESUMO
Two phosphorescent dinuclear iridium(III) diastereomers (ΛΔ/ΔΛ) and (ΛΛ/ΔΔ) are readily separated by making use of their different solubilities in hot hexane. The bridging diarylhydrazide ligand plays an important role in the electrochemistry and photophysics of the complexes. Organic light-emitting devices (OLEDs) that use these complexes as the green-emissive dopants in solution-processable single-active-layer architectures feature electroluminescence efficiencies that are remarkably high for dinuclear metal complexes, achieving maximum values of 37â cd A(-1), 14â lm W(-1), and 11% external quantum efficiency.
RESUMO
Spin properties are intrinsic characters of electrons. Radical molecules contain unpaired electron(s), and their unique chemical and physical properties make them an ideal platform for investigating spin properties in molecular systems. Among them, the burgeoning interest in stable conjugated diradicals is attributed to their distinctive characteristics, notably the dynamic resonance structures between open-shell and closed-shell forms, the malleability of their spin states, and the profound influence of intermolecular spin-spin interactions. A deep understanding of the spin characteristics of unpaired electrons in stable conjugated diradicals provides guidance for the design, synthesis, and characterization of radical-based materials. In this review, we discuss the unique spin delocalization, spin states, and spin-spin coupling characteristics of conjugated diradicals and emphasize how to precisely control these spin characteristics to understand their role in the molecules and as functional radical materials.
RESUMO
Exciplex emitters naturally have thermally activated delayed fluorescence characteristics due to their spatially separated molecular orbitals. However, the intermolecular charge transfer potentially induces diverse non-radiative decay channels, severely hindering the construction of efficient red exciplexes. Thus, a thorough comprehension of this energy loss is of paramount importance. Herein, different factors, including molecular rigidity, donor-acceptor interactions and donor-donor/acceptor-acceptor interactions, that impact the non-radiative decay were systematically investigated using contrasting exciplex emitters. The exciplex with rigid components and intermolecular hydrogen bonds showed a photoluminescence quantum yield of 84.1% and a singlet non-radiative decay rate of 1.98 × 106 s-1 at an optimized mixing ratio, respectively, achieving a 3.3-fold increase and a 70% decrease compared to the comparison group. In the electroluminescent device, a maximum external quantum efficiency of 23.8% was achieved with an emission peak of 608 nm, which represents the state-of-the-art organic light-emitting diodes using exciplex emitters. Accordingly, a new strategy is finally proposed, exploiting system rigidification to construct efficient red exciplex emitters that suppress non-radiative decay.
RESUMO
Asymmetric diradical molecular systems with different resonance mechanisms are largely unexplored. Herein, two conjugated asymmetric diradicals with Blatter and phenoxyl moieties (pBP and mBP) have been synthesized and studied in depth. A complete set of spectroscopic, X-ray crystallographic and magnetic techniques, together with quantum chemical calculations, have been used. The para-isomer (pBP) bears diradical and zwitterionic resonant forms, the latter by a electron delocalization mechanism, which are synergistically integrated by a sequence of nitrogen, provided by the Blatter moiety imine and amine (of different acceptor nature). In the meta-isomer (mBP), the zwitterionic form promoted in pBP by the lone-pair electron of the amine nitrogen is not available, yet it possesses a pseudo-hyperconjugation effect where the N lone pair mediates in a bonding coupling in a counter homolytic bond scission mechanism. Both electronic effects converge to promote medium diradical characters and narrow singlet-triplet gaps to the two electronic isomers. All these aspects delineate the subtle balance that shapes the electronic structure of open-shell molecules, which is even more challenging in the case of asymmetric systems, such as those described here with asymmetric phenoxyl-Blatter diradicals.
RESUMO
Stable organic radicals, which possess half-filled orbitals in the vicinity of the Fermi energy, are promising candidates for electronic devices. In this Letter, using a combination of scanning-tunneling-microscopy-based break junction (STM-BJ) experiments and quantum transport theory, a stable fluorene-based radical is investigated. We demonstrate that the transport properties of a series of fluorene derivatives can be tuned by controlling the degree of localization of certain orbitals. More specifically, radical 36-FR has a delocalized half-filled orbital resulting in Breit-Wigner resonances, leading to an unprecedented conductance enhancement of 2 orders of magnitude larger than the neutral nonradical counterpart (36-FOH). In other words, conversion from a closed-shell fluorene derivative to the free radical in 36-FR opens an electron transport path which massively enhances the conductance. This new understanding of the role of radicals in single-molecule junctions opens up a novel design strategy for single-molecule-based spintronic devices.
RESUMO
Logic-in-memory devices are a promising and powerful approach to realize data processing and storage driven by electrical bias. Here, an innovative strategy is reported to achieve the multistage photomodulation of 2D logic-in-memory devices, which is realized by controlling the photoisomerization of donor-acceptor Stenhouse adducts (DASAs) on the surface of graphene. Alkyl chains with various carbon spacer lengths (n = 1, 5, 11, and 17) are introduced onto DASAs to optimize the organic-inorganic interfaces: 1) Prolonging the carbon spacers weakens the intermolecular aggregation and promotes isomerization in the solid state. 2) Too long alkyl chains induce crystallization on the surface and hinder the photoisomerization. Density functional theory calculation indicates that the photoisomerization of DASAs on the graphene surface is thermodynamically promoted by increasing the carbon spacer lengths. The 2D logic-in-memory devices are fabricated by assembling DASAs onto the surface. Green light irradiation increases the drain-source current (Ids ) of the devices, while heat triggers a reversed transfer. The multistage photomodulation is achieved by well-controlling the irradiation time and intensity. The strategy based on the dynamic control of 2D electronics by light integrates molecular programmability into the next generation of nanoelectronics.
RESUMO
Invisible inks have been applied for the secrecy of texts, symbols and binary images. Based on the photochromism of donor-acceptor Stenhouse adducts (DASAs) in the solid-state promoted by ester-containing molecules, we report the encryption of grayscale information by controlling the kinetics of photoisomerization.
RESUMO
The new homoleptic tris-cyclometalated [Ir(C^N)(3)] complexes mer-8, fac-8, and fac-9 incorporating γ-carboline ligands are reported. Reaction of 3-(2,4-difluorophenyl)-5-(2-ethylhexyl)-pyrido[4,3-b]indole 6 with iridium(III) chloride under standard cyclometalating conditions gave the homoleptic complex mer-8 in 63% yield. The X-ray crystal structure of mer-8 is described. The Ir-C and Ir-N bonds show the expected bond length alternations for the differing trans influence of phenyl and pyridyl ligands. mer-8 quantitatively isomerized to fac-8 upon irradiation with UV light. However, heating mer-8 at 290 °C in glycerol led to an unusual regioselective loss of one fluorine atom from each of the ligands, yielding fac-9 in 58% yield. fac-8 is thermally very stable: no decomposition was observed when fac-8 was heated in glycerol at 290 °C for 48 h. The γ-carboline system of fac-8 enhances thermal stability compared to the pyridyl analogue fac-Ir(46dfppy)(3)10, which decomposes extensively upon being heated in glycerol at 290 °C for 2 h. Complexes mer-8, fac-8, and fac-9 are emitters of blue-green light (λ(max)(em) = 477, 476, and 494 nm, respectively). The triplet lifetimes for fac-8 and fac-9 are ~4.5 µs at room temperature; solution Φ(PL) values are 0.31 and 0.22, respectively.