Constructing Targeted Strong Nb4d-O2p-Li2s Configurations to Obtain Excellent Energy Density and Long Life for Li-Rich Cathodes.

The Li-rich Mn-based cathode materials (LMRs) deliver excellent energy density and exhibit low cost, which are considered as the most promising cathode materials for the next generation lithium-ion batteries. However, the irreversible redox reaction of the oxygen atoms directly leads to release oxygen and intensifies phase transformation. Besides, the local stress and strain will be generated due to the unit-cell volume difference between R-3m and C2/m phases, which continuously aggravates the collapse of secondary particles. Herein, the strong Nb4d-O2p-Li2s configurations at the Li1 sites of the TM-layer in the C2/m phase and secondary particles with the radial arrangement of refined primary particles are designed to inhibit oxygen release and relieve lattice stress by Nb2O5 treatment. Meanwhile, the preferential growth of the active {010} planes is presented to obtain an excellent transmission rate of Li+. As a result, the designed LMR delivers remarkable electrochemical properties with high discharge capacity and initial coulomb efficiency of 276 mAh g-1 and 85 % at 0.1 C, outstanding cycling retention rate of 81 % after 300 cycles. This novel crystal structure combining oxygen coordination regulation and micro-nano scale design provides inspiration for the design of high-performance LMRs.

Unlocking Enhanced Capacitive Deionization of NaTi2(PO4)3/Carbon Materials by the Yolk-Shell Design.

The low salt adsorption capacities (SACs) of benchmark carbon materials (usually below 20 mg g-1) are one of the most challenging issues limiting further commercial development of capacitive deionization (CDI), an energetically favorable method for sustainable water desalination. Sodium superionic conductor (NASICON)-structured NaTi2(PO4)3 (NTP) materials, especially used in combination with carbon to prepare NTP/C materials, provide emerging options for higher CDI performance but face the problems of poor cycling stability and dissolution of active materials. In this study, we report the development of the yolk-shell nanoarchitecture of NASICON-structured NTP/C materials (denoted as ys-NTP@C) using a metal-organic framework@covalent organic polymer (MOF@COP) as a sacrificial template and space-confined nanoreactor. As expected, ys-NTP@C exhibits good CDI performance, including exemplary SACs with a maximum SAC of 124.72 mg g-1 at 1.8 V in the constant-voltage mode and 202.76 mg g-1 at 100 mA g-1 in the constant-current mode, and good cycling stability without obvious performance degradation or energy consumption increase over 100 cycles. Furthermore, X-ray diffraction used to study CDI cycling clearly exhibits the good structural stability of ys-NTP@C during repeated ion intercalation/deintercalation processes, and the finite element simulation shows why yolk-shell nanostructures exhibit better performance than other materials. This study provides a new synthetic paradigm for preparing yolk-shell structured materials from MOF@COP and highlights the potential use of yolk-shell nanoarchitectures for electrochemical desalination.

GO-CoNiP New Composite Material Modified Separator for Long Cycle Lithium-Sulfur Batteries.

Lithium-sulfur batteries with high capacity are considered the most promising candidates for next-generation energy storage systems. Mitigating the shuttle reaction and promoting catalytic conversion within the battery are major challenges in the development of high-performance lithium-sulfur batteries. To solve these problems, a novel composite material GO-CoNiP is synthesized in this study. The material has excellent conductivity and abundant active sites to adsorb polysulfides and improve reaction kinetics within the battery. The initial capacity of the GO-CoNiP separator battery at 1 C is 889.4 mAh g-1 , and the single-cycle decay is 0.063% after 1000 cycles. In the 4 C high-rate test, the single-cycle decay is only 0.068% after 400 cycles. The initial capacity is as high as 828.2 mAh g-1 under high sulfur loading (7.3 mg cm-2 ). In addition, high and low-temperature performance tests are performed on the GO-CoNiP separator battery. The first cycle discharge reaches 810.9 mAh g-1 at a low temperature of 0 °C, and the first cycle discharge reaches 1064.8 mAh g-1 at a high temperature of 60 °C, and both can run stably for 120 cycles. In addition, in situ Raman tests are conducted to explain the adsorption of polysulfides by GO-CoNiP from a deeper level.

Improving Low-temperature Performance and Stability of Na2 Ti6 O13 Anodes by the Ti-O Spring Effect through Nb-doping.

Na2 Ti6 O13 (NTO) with high safety has been regarded as a promising anode candidate for sodium-ion batteries. In the present study, integrated modification of migration channels broadening, charge density re-distribution, and oxygen vacancies regulation are realized in case of Nb-doping and have obtained significantly enhanced cycling performance with 92 % reversible capacity retained after 3000 cycles at 3000 mA g-1 . Moreover, unexpected low-temperature performance with a high discharge capacity of 143 mAh g-1 at 100 mA g-1 under -15 °C is also achieved in the full cell. Theoretical investigation suggests that Nb preferentially replaces Ti3 sites, which effectively improves structural stability and lowers the diffusion energy barrier. What's more important, both the in situ X-ray diffraction (XRD) and in situ Raman furtherly confirm the robust spring effect of the Ti-O bond, making special charge compensation mechanism and respective regulation strategy to conquer the sluggish transport kinetics and low conductivity, which plays a key role in promoting electrochemical performance.

SiOx Anode: From Fundamental Mechanism toward Industrial Application.

Silicon monoxide (SiO) has been explored and confirmed as a promising anode material of lithium-ion batteries. Compared with pure silicon, SiO possesses a more stable microstructure which makes better comprehensive electrochemical properties. However, the lithiation mechanism remains in dispute, and problems such as poor cyclability, unsatisfactory electrical conductivity, and low initial Coulombic efficiency (ICE) need to be addressed. Additionally, more attention needs to be paid on the internal relationship between electrochemical performances and structures. In this review, the different preparation processes, the derived microstructure of the SiOx , the corresponding lithiation mechanism, and electrochemical properties are summarized. Researches about disproportionation reaction which is regarded as a key point and other modifications are systematically introduced. Closely linked with structure, the advantages and disadvantages of various SiOx anode materials are summarized and analyzed, and the possible directions toward the practical applications of SiOx anode material are presented. In a word, from the preparation and reaction mechanism of the material to the modifications and future development, a complete and systematical review on SiOx anode is presented.

Nickel-Rich Layered Cathode Materials for Lithium-Ion Batteries.

Nickel-rich layered transition metal oxides are considered as promising cathode candidates to construct next-generation lithium-ion batteries to satisfy the demands of electrical vehicles, because of the high energy density, low cost, and environment friendliness. However, some problems related to rate capability, structure stability, and safety still hamper their commercial application. In this Review, beginning with the relationships between the physicochemical properties and electrochemical performance, the underlying mechanisms of the capacity/voltage fade and the unstable structure of Ni-rich cathodes are deeply analyzed. Furthermore, the recent research progress of Ni-rich oxide cathode materials through element doping, surface modification, and structure tuning are summarized. Finally, this review concludes by discussing new insights to expand the field of Ni-rich oxides and promote practical applications.

MoO2@C modified separator as an interlayer for high performance lithium-sulfur batteries.

Lithium-sulfur batteries have attracted much attention as a promising next-generation energy storage system due to their high theoretical specific capacity and energy density. However, lithium-sulfur batteries are still facing some problems that hinder their large-scale commercial application. High conductivity molybdenum dioxide coated with carbon composite (MoO2@C) were introduced to coat the separator to study its application in lithium sulfur batteries. Molybdenum dioxide coated with carbon composite nanoparticles were synthesized by hydrothermal method and high-temperature calcination and then was coated on the separator with acetylene black. The coating layer can take advantage of the synergetic effect of physical barrier and chemical adsorption to reduce the loss of active substances. The electrochemical performance of the battery has been improved by applying MoO2@C in lithium-sulfur separator. The first discharge specific capacity is 917 mA h g-1 under the current density of 1.0 A g-1, after 300 cycles, the capacity is 618 mA h g-1; after 200 cycles under the current density of 2.0 A g-1, the reversible specific capacity can still maintain 551 mA h g-1.

A Ge/Carbon Atomic-Scale Hybrid Anode Material: A Micro-Nano Gradient Porous Structure with High Cycling Stability.

The continuous growth of the solid-electrolyte interface (SEI) and material crushing are the fundamental issues that hinder the application of Ge anodes in lithium-ion batteries. Solving Ge deformation crushing during discharge/charge cycles is challenging using conventional carbon coating modification methods. Due to the chemical stability and high melting point of carbon (3500 °C), Ge/carbon hybridization at the atomic level is challenging. By selecting a suitable carbon source and introducing an active medium, we have achieved the Ge/carbon doping at the atom-level, and this Ge/carbon anode shows excellent electrochemical performance. The reversible capacity is maintained at 1127 mAh g-1 after 1000 cycles (2 A g-1 (2-71 cycles), 4 A g-1 (72-1000 cycles)) with a retention of 84 % compared to the second cycle. The thickness of the SEI is only 17.4 nm after 1000 cycles. The excellent electrochemical performance and stable SEI fully reflect the application potential of this material.

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode.

Demands for large-scale energy storage systems have driven the development of layered transition-metal oxide cathodes for room-temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered-tunnel heterostructure Na0.44 Co0.1 Mn0.9 O2 cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered-tunnel electrode shows outstanding electrochemical performance in sodium half-cell system and excellent compatibility with hard carbon anode in sodium full-cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium-ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high-energy X-ray diffraction and ex situ X-ray absorption spectroscopy as well as operando X-ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.

Nanowire of WP as a High-Performance Anode Material for Sodium-Ion Batteries.

The design and development of electrode materials with high specific capacity and long cycling life for sodium-ion batteries (SIBs) is still a critical challenge. In this communication, we report the development of tungsten phosphide (WP) nanowire on carbon cloth (WP/CC) as an anode for SIBs. The WP/CC exhibits superior sodium storage capability with 502 mA h g-1 at 0.1 A g-1 . Moreover, this anode is capable of delivering a long lifespan at 2 A g-1 with an excellent capacity retention of 99 % after 1000 cycles.

Hydrothermal synthesis, evolution, and electrochemical performance of LiMn0.5Fe0.5PO4 nanostructures.

LiMn0.5Fe0.5PO4 (LMFP) materials are synthesized by the hydrothermal approach in an organic-free and surfactant-free aqueous solution. The phase and morphological evolution of the material intermediates at different reaction temperatures and times are characterized by XRD, SEM and TEM, respectively. The results show that during temperature increase, the solubility product (Ksp) of the precursors (Li3PO4, Fe3(PO4)2 and (Mn,Fe)3(PO4)2) is the decisive parameter for the precipitation processes. Once the temperature locates at the range of 100-110 °C, the unstable precursors dissolve quickly and then LMFP nuclei are formed, followed by a dissolution-reprecipitation process. As the reaction progresses, the primary particles self-aggregate to form rod or plate particles to reduce the overall surface energy through oriented attachment (OA) and the Ostwald ripening (OR) mechanism. Moreover, the resultant concentration of the precursor significantly affects the crystal size of LMFP by altering the supersaturation degree of solution at the nucleation stage. The carbon coated LMFP nanostructure synthesized at 0.6 mol L(-1) (resultant concentration of PO4(3-)) delivers discharge capacities of 155, 100 and 81 mA h g(-1) at 0.1, 5 and 20 C rate, respectively. The understanding of nanostructural evolution and its influence on the electrochemical performance will pave a way for a high-performance LMFP cathode.

Formulating Local Environment of Oxygen Mitigates Voltage Hysteresis in Li-Rich Materials.

Li-rich cathode materials have emerged as one of the most prospective options for Li-ion batteries owing to their remarkable energy density (>900 Wh kg-1). However, voltage hysteresis during charge and discharge process lowers the energy conversion efficiency, which hinders their application in practical devices. Herein, the fundamental reason for voltage hysteresis through investigating the O redox behavior under different (de)lithiation states is unveiled and it is successfully addressed by formulating the local environment of O2-. In Li-rich Mn-based materials, it is confirmed that there exists reaction activity of oxygen ions at low discharge voltage (<3.6 V) in the presence of TM-TM-Li ordered arrangement, generating massive amount of voltage hysteresis and resulting in a decreased energy efficiency (80.95%). Moreover, in the case where Li 2b sites are numerously occupied by TM ions, the local environment of O2- evolves, the reactivity of oxygen ions at low voltage is significantly inhibited, thus giving rise to the large energy conversion efficiency (89.07%). This study reveals the structure-activity relationship between the local environment around O2- and voltage hysteresis, which provides guidance in designing next-generation high-performance cathode materials.

Favored Amorphous LixSi Process with Restrained Volume Change Enabling Long Cycling Quasi-Solid-State SiOx anode.

Silicon-based anodes are becoming promising materials due to their high specific capacity. However, the intrinsically large volume change brought about by the alloying reaction results in the crushing of the active particles and destruction of the electrode structure, which severely limits its practical application. Various structured and modified silica-based anodes exhibit improved cycling stability and the demonstrated ability to mitigate their volume changes through interfacial and binder strategies. However, the issue of large volume changes in silicon-based anodes remains. Herein, we report a gel polymer electrolyte (GPE) prepared through an in situ thermal polymerization process that is suitable for SiOx anode materials and achieving long-term cycling stability. GPE-based cells essentially mitigate the volume change of SiOx anodes by guiding the unique lithiation/delithiation mechanism that tends to favor the formation and delithiation of amorphous-LixSi (a-LixSi) with smaller volume change, thereby mitigating electrode damage and cracking, and achieving the significant improvement in cycling performance. The prepared GPE-SiOx cells retained 693.80 mAh g-1 reversible capacity after 450 cycles at 500 mA g-1. In addition, the prelithiation process was incorporated to mitigate capacity fluctuations and improve the Initial Coulombic Efficiency (ICE), and a reversible capacity of 641.90 mAh g-1 was retained after 480 cycles.

A Feasible Dual Modification Strategy of Internal Anion Redox Chemistry and Surface Engineering on P2 Layer-Structured Cathodes in Sodium-Ion Batteries.

Boosting the anion redox reaction opens up a possibility of further capacity enhancement on transition-metal-ion redox-only layer-structured cathodes for sodium-ion batteries. To mitigate the deteriorating impact on the internal and surface structure of the cathode caused by the inevitable increase in the operation voltage, probing a solution to promote the bulk-phase crystal structure stability and surface chemistry environment to further facilitate the electrochemical performance enhancement is a key issue. A dual modification strategy of establishing an anion redox hybrid activation trigger agent inside the crystal structure in combination with surface oxide coating is successfully developed. P2-type layer structure cathode materials with Zn/Li (Na-O-Zn@Na-O-Li) anion redox hybrid triggers and a ZnO coating layer possess superior capacity and cycle performance, along with outstanding structural stability, decreased Mn-ion dissolution effect, and less crystal particle cracking during the cycling process. This study represents a facile modification solution to perform structure optimization and property enhancement toward high-performance layered structure cathode materials with anion redox features in sodium-ion batteries.

Treatment of distiller grain with wet-process phosphoric acid leads to biochar for the sustained release of nutrients and adsorption of Cr(VI).

Soil amendment products, such as biochar, with both sustained nutrient release and heavy metal retention properties are of great need in agricultural and environmental industries. Herein, we successfully prepared a new biochar material with multinutrient sustained-release characteristics and chromium removal potential derived from distiller grain by wet-process phosphoric acid (WPPA) modification without washing. SEM, TEM TG-IR, in situ DRIFTS and XRD characterization indicated that biochar and polyphosphate formed simultaneously and were tightly intertwined by one-step pyrolysis. The optimal product (PKBC-400) had the most stable carbon structure and an adequate P-O-P structure with less P loss. Batch experiments illustrated that 92.83% P (ortho-P), 85.94% K, 41.49% Fe, 78.42% Al and 65.60% Mg were continuously released in water from PKBC-400 within 63 days, and the maximum Cr removal rate reached 83.57% (50 mg/L K2Cr2O7, pH=3.0) with an increased BET surface area (304.0557 m2/g) after nutrient release. SEM, IC and 31P NMR analyses revealed that the dissolution and hydrolysis of polyphosphates not only realized the sustained release of multiple nutrients but also significantly improved the sustained release performance. The proposed resource utilization strategy provided new ideas for Cr hazard control, biomass waste utilization and fertilizer development.

Addressing voltage hysteresis in Li-rich cathode materials via gas-solid interface modification.

Li-rich layered materials have attracted much attention for their large capacity (>250 mA h g-1) stemming from anion redox at high voltage. However, inherent problems, such as capacity decay and voltage decay/hysteresis during cycling, hinder their commercial progress. In this work, an oxygen vacancy-accompanied spinel interface layer is constructed by gas-solid reaction via NiCO3 treatment at 650 °C, which reduces the asymmetry of anion redox and improves structural stability. Therefore, a 1 mol% NiCO3-modified sample powerfully reduces the voltage hysteresis (∼0.23 V) in the first cycle, simultaneously exhibiting an excellent discharge capacity of 275 mA h g-1 at 0.1 C with a capacity retention of 90% for 200 cycles at 1 C.

Fabricating Heterostructures for Boosting the Structure Stability of Li-Rich Cathodes.

Li-rich Mn-based oxides are regarded as the most promising new-generation cathode materials, but their practical application is greatly hindered by structure collapse and capacity degradation. Herein, a rock salt phase is epitaxially constructed on the surface of Li-rich Mn-based cathodes through Mo doping to improve their structural stability. The heterogeneous structure composed of a rock salt phase and layered phase is induced by Mo6+ enriched on the particle surface, and the strong Mo-O bonding can enhance the TM-O covalence. Therefore, it can stabilize lattice oxygen and inhibit the side reaction of the interface and structural phase transition. The discharge capacity of 2% Mo-doped samples (Mo 2%) displays 279.67 mA h g-1 at 0.1 C (vs 254.39 mA h g-1 (pristine)), and the discharge capacity retention rate of Mo 2% is 79.4% after 300 cycles at 5 C (vs 47.6% (pristine)).

Regeneration of Spent Lithium Manganate Batteries into Al-Doped MnO2 Cathodes toward Aqueous Zn Batteries.

Large quantities of spent lithium-ion batteries (LIBs) will inevitably be generated in the near future because of their wide application in many fields. It will cause not only resource waste but also environmental pollution if these spent batteries are not properly handled. Until now, the recycling of spent lithium manganate batteries has centered on high-valuable elements such as lithium; however, manganese element and current collector Al foil have not yet attracted wide attention. In this work, aluminum-doped manganese dioxide was synthesized by overall recycling cathode active materials and current collector Al foil from a spent lithium manganate battery. Employing such aluminum-doped manganese dioxide as the cathode material of aqueous Zn batteries, it displays better electrochemical performance than manganese dioxide prepared by only recycling the cathode active materials. The overall recycling not only simplifies the recycling process but also realizes high-value recycling of spent lithium manganate batteries. We offer new tactics for overall recycling of cathodes from spent LIBs and designing high-performance manganese dioxide cathodes for aqueous Zn batteries.

Manipulating the crystal plane angle within the primary particle arrangement for the radial ordered structure in a Ni-rich cathode.

Ni-rich cathodes with a radial ordered microstructure have been proved to enhance materials' structural stability. However, the construction process of radial structures has not yet been clearly elaborated. Herein, the formation process of radial structures induced by different doped elements has been systematically investigated. The advanced Electron Back Scatter Diffraction (EBSD) characterization reveals that W-doped materials are more likely to form a low-angle arrangement between crystal planes of the primary particles and exhibit twin growth during sintering than a B-doped cathode. The corresponding High Angle Annular Dark Field-Scanning Transmission Electron Microscopy (HAADF-STEM) analysis further proves that the twin growth induced by W doping can promote the migration of Li+. Simultaneously, the W-doped sample reduces the (003) plane surface energy and promotes the retention of the crystal plane, which can effectively alleviate the structural degradation caused by Li+ (de)intercalation. At a cut-off voltage of 4.6 V, the W-doped cathode displays a capacity retention rate of 94.1% after 200 cycles at 1C. This work unveils the influence of different element doping on the structure from the perspective of crystal plane orientation within primary particles and points out the importance of the exposure and orientation of the crystal plane of the particles.

Optimizing Vanadium Redox Reaction in Na3V2(PO4)3 Cathodes for Sodium-Ion Batteries by the Synergistic Effect of Additional Electrons from Heteroatoms.

Na3V2(PO4)3 (NVP) is one of the most potential cathode materials for sodium-ion batteries (SIBs), but its actual electrochemical performance is limited by the defects of large electron and ion transfer resistance. Multicomponent design is considered an effective method to optimize the conductivity of NVP electrodes. Therefore, Cr and Si are added in NVP to form a multielement component of Na3V1.9Cr0.1(PO4)2.9(SiO4)0.1 (NVP-CS). It is confirmed that 3d electrons of Cr are beneficial for improving the conductivity and increasing the average potential by activating V4+/V5+. Theoretical calculations show that the introduction of Si changes the electronic structure of V and O, thus promoting the electrochemical reaction of V3+/V4+ to exert higher capacity. Due to the coordination of the two elements, a lower migration barrier is obtained in NVP-CS. Specifically, NVP-CS retains the advantages of single-doped electrodes very well (capacity retention of 90% after 300 cycles at 1 C and a high capacity of 94.1 mA h g-1 at 5 C, compared to NVP with only 82.6% capacity retention at 1 C and 59.4 mA h g-1 at 5 C). The excellent electrochemical performance results show that NVP can be successfully optimized by the introduction of Cr and Si. This work can provide some inspiration for multicomponent material research of cathode materials.