Sequential Epidermal Growth Factor Receptor Tyrosine Kinase Inhibitor-Induced Radical Surgery in Oligometastatic Non-Small Cell Lung Cancer: A Case Report.

Sequential regimens in patients with epidermal growth factor receptor (EGFR) mutation-positive non-small cell lung cancer (NSCLC) can overcome tyrosine kinase inhibitor (TKI) resistance and maximize clinical benefit. Patients with advanced NSCLC can achieve excellent tumor control after a period of EGFR-TKI treatment. Patients may benefit from additional local treatment, such as surgery or radiation therapy, once the tumor is under control. Here, we present a case of a patient with advanced oligometastatic NSCLC with EGFR mutations who achieved downstaging through sequential EGFR-TKI-based precision medicine allowing resection of residual disease.

Probing Liquid-Solid and Vapor-Liquid-Solid Interfaces of Hierarchical Surfaces Using High-Resolution Microscopy.

Liquid-solid (LS) and vapor-liquid-solid (VLS) interfaces are important for the fundamental understanding of how surface chemistry impacts industrial processes and applications. Superhydrophobic surfaces, from structural hierarchies, were fabricated by coating flat smooth surfaces with hollow glass microspheres. These surfaces are referred to as structural hierarchical-modified microsphere surfaces (SHiMMs). Two-phase LS and three-phase VLS interfaces of water droplets on SHiMMs, with an apparent static contact angle (aSCA) of ∼160°, were probed at microscale using environmental scanning electron microscopy (ESEM) and high-resolution optical microscopy (OM). Both ESEM and OM confirmed the presence of air pockets in 3-150 µm range at the VLS triple-phase of the droplet peripheral contact line. The wetting characteristics of the LS interface in the interior of the water droplet were probed using energy-dispersive spectroscopy, which corroborated well with the VLS triple-phase observations, confirming the presence of both the microscale air pockets and fractional complete wetting of the SHiMMs. The superhydrophobic water droplets on the SHiMMs also exhibited relatively high adhesion to the SHiMMs-a tilt angle of 10°-40° was needed for detaching the droplets off the surfaces. Semiquantitative three-phase contact-line analysis and experimental data indicated high-water aSCA, and large adhesion on the microscale-roughened SHiMMs is attributed to pinning of the probe liquid both at the triple VLS and interior LS interfaces. The control over microroughness and surface chemistry of the SHiMMs will allow tuning of both the static and dynamic liquid-surface interactions.

Experimental realization of coherent perfect polarization rotation.

Coherent perfect processes enable high optical efficiencies in optical conversion phenomena such as coherent perfect absorption or coherent perfect polarization rotation. A linear optical coherent perfect process based on Faraday rotation has been evaluated experimentally, achieving contrast limited by other optical components of the system and demonstrating like-parity resonance doublets above threshold.

Chromatic control in coextruded layered polymer microlenses.

We describe the formation, characterization and theoretical understanding of microlenses comprised of alternating polystyrene and polymethylmethacrylate layers produced by multilayer coextrusion. These lenses are fabricated by photolithography, using a grayscale mask followed by plasma etching, so that the refractive index alternation of the bilayer stack appears across the radius of the microlens. The alternating quarter-wave thick layers form a one-dimensional photonic crystal whose dispersion augments the material dispersion, allowing one to sculpt the chromatic dispersion of the lens by adjusting the layered structure. Using Huygen's principle, we model our experimental measurements of the focal length of these lenses across the reflection band of the multilayer polymer film from which the microlens is fashioned. For a 56 µm diameter multilayered lens of focal length 300 µm, we measured a ∼ 25% variation in the focal length across a shallow, 50 nm-wide reflection band.

Downregulation of homeobox B8 in attenuating non-small cell lung cancer cell migration and invasion though the epithelial-mesenchymal transition pathway.

Background: Homeobox (HOX) family genes have been identified as regulators of cancer development. No research exists concerning the mechanisms underlying homeobox B8 (HOXB8) activity in non-small cell lung cancer (NSCLC). In this study, we investigated expression and biological function in NSCLC to determine whether it is an important marker of patient prognosis. Methods: HOXB8 expression in NSCLC tissues was investigated using immunohistochemistry (IHC) and Western blot assays. In addition, HOXB8 was knocked down in NSCLC cells to assess its biological functions in this context. The invasive and migratory potential of cells was evaluated by using Transwell (BD, Franklin Lakes, NJ, USA) inserts with 8-µm pores. Furthermore, Western blotting was used to explore whether HOXB8 can influence epithelial-mesenchymal transition (EMT). Results: HOXB8 was expressed at high levels in NSCLC tissues and cell lines compared with adjacent normal tissues. Patients with high HOXB8 expression had shorter survival time and worse prognosis. HOXB8 expression was associated with pathological grading, tumor size, and lymph node metastasis. HOXB8 was prognostic in patients with NSCLC. After knockdown of HOXB8 via small interfering RNA, the proliferation, migration and invasion ability of the cells were significantly reduced compared with the control group. Moreover, EMT was inhibited by the downregulation of HOXB8 expression, as the expressions of E-cadherin was upregulated and that of the N-cadherin, vimentin, matrix metalloproteinase 2 (MMP2), and twist were downregulated. HOXB8 is a member of the ANTP homeobox family and encodes a nuclear protein with a homeobox DNA-binding domain. It is included in a cluster of homeobox B genes located on chromosome 17. The encoded protein functions as a sequence-specific transcription factor that is involved in development. Conclusions: HOXB8 is highly expressed in NSCLC and may predict prognosis of patients with this type of cancer. Furthermore, HOXB8 may promote NSCLC progression through the regulation of the EMT process.

Personalized treatment of extensive stage small cell lung cancer: A case report and literature review.

A 50-year-old female patient presented with post-exercise dyspnea in September 2016, and was subsequently diagnosed with SCLC with multiple brain and spinal metastases. The first-line treatment was etoposide combined with cisplatin and synchronously performed radiotherapy for the brain and spinal cord metastases. She was treated with anlotinib after disease progression in December 2018 and continued to have clinical benefit for nearly 25 months. Unexpectedly, the patient can still benefit from further combination treatment with durvalumab after another disease progression in February 2021. Thus, it may be a potential option to use anlotinib along with immunotherapy after the anlotinib resistance in SCLC, but more clinical data are still needed to confirm it. Moreover, ctDNA dynamic monitoring was performed and reflected the outcome of the process of treatment.

Photo-pens: a simple and versatile tool for maskless photolithography.

We demonstrate conical pores etched in tracked glass chips for fabricating patterns at the micrometer scale. Highly fluorescent patterns based on photopolymerization of diacetylene films were formed by irradiating UV light through conical pores called "photo-pens". The properties of photopens were investigated through experiments, finite-difference-time-domain (FDTD) simulations and numerical calculations based on Fresnel equations. We show that the pattern dimensions are easily controlled by adjusting the exposure time. Thus, patterns with a range of dimensions can be fabricated without any need of changes in the pore diameter. Parallel patterning was also demonstrated by simultaneously exposing the films to photons through multiple pores in the chip. Our method provides an inexpensive, versatile, and efficient way for patterning without the use of sophisticated masks.

Eradication of tumor growth by delivering novel photothermal selenium-coated tellurium nanoheterojunctions.

Two-dimensional nanomaterial-based photothermal therapy (PTT) is currently under intensive investigation as a promising approach toward curative cancer treatment. However, high toxicity, moderate efficacy, and low uniformity in shape remain critical unresolved issues that hamper their clinical application. Thus, there is an urgent need for developing versatile nanomaterials to meet clinical expectations. To achieve this goal, we developed a stable, highly uniform in size, and nontoxic nanomaterials made of tellurium-selenium (TeSe)-based lateral heterojunction. Systemic delivery of TeSe nanoparticles in mice showed highly specific accumulation in tumors relative to other healthy tissues. Upon exposure to light, TeSe nanoparticles nearly completely eradicated lung cancer and hepatocellular carcinoma in preclinical models. Consistent with tumor suppression, PTT altered the tumor microenvironment and induced immense cancer cell apoptosis. Together, our findings demonstrate an exciting and promising PTT-based approach for cancer eradication.

High-Performance Humidity Sensor Based on Urchin-Like Composite of Ti3C2 MXene-Derived TiO2 Nanowires.

Humidity sensors have broad applications in health monitoring, environmental protection and human-machine interface, and robotics. Here, we developed a humidity sensor using alkali oxidation method to grow in situ TiO2 nanowires on two-dimensional Ti3C2 MXene. With an order of magnitude larger surface area compared to pure Ti3C2 or TiO2 materials, the urchin-like Ti3C2/TiO2 composite demonstrates a record high sensitivity in a low relative humidity (RH) environment (∼280 pF/% RH from 7% RH to 33% RH). Complex impedance spectroscopy and Schottky junction theory were employed to understand the underlying sensing mechanisms of the Ti3C2/TiO2 composite under various humidity conditions. We demonstrate the application of humidity sensors made with the Ti3C2/TiO2 composite for noncontact detection of the presence of various liquids as well as human fingers.

Engineering Lateral Heterojunction of Selenium-Coated Tellurium Nanomaterials toward Highly Efficient Solar Desalination.

Herein, a core-shell tellurium-selenium (Te-Se) nanomaterial with polymer-tailed and lateral heterojunction structures is developed as a photothermal absorber in a bionic solar-evaporation system. It is further revealed that the amorphous Se shell surrounds the crystalline Te core, which not only protects the Te phase from oxidation but also serves as a natural barrier to life entities. The core (Te)-shell (Se) configuration thus exhibits robust stability enhanced by 0.05 eV per Se atom and excellent biocompatibility. Furthermore, high energy efficiencies of 90.71 ± 0.37% and 86.14 ± 1.02% and evaporation rates of 12.88 ± 0.052 and 1.323 ± 0.015 kg m-2 h-1 are obtained under 10 and 1 sun for simulated seawater, respectively. Importantly, no salting out is observed in salt solutions, and the collected water under natural light irradiation possesses extremely low ion concentrations of Na+, K+, Ca2+, and Mg2+ relative to real seawater. Considering the tunable electronic structures, biocompatibilities, and modifiable broadband absorption of the solar spectrum of lateral heterojunction nanomaterials of Te-Se, the way is paved to engineering 2D semiconductor materials with supporting 3D porous hydrophilic materials for application in solar desalination, wastewater treatment, and biomedical ventures.

Polymeric lithography editor: Editing lithographic errors with nanoporous polymeric probes.

A new lithographic editing system with an ability to erase and rectify errors in microscale with real-time optical feedback is demonstrated. The erasing probe is a conically shaped hydrogel (tip size, ca. 500 nm) template-synthesized from track-etched conical glass wafers. The "nanosponge" hydrogel probe "erases" patterns by hydrating and absorbing molecules into a porous hydrogel matrix via diffusion analogous to a wet sponge. The presence of an interfacial liquid water layer between the hydrogel tip and the substrate during erasing enables frictionless, uninterrupted translation of the eraser on the substrate. The erasing capacity of the hydrogel is extremely high because of the large free volume of the hydrogel matrix. The fast frictionless translocation and interfacial hydration resulted in an extremely high erasing rate (~785 µm2/s), which is two to three orders of magnitude higher in comparison with the atomic force microscopy-based erasing (~0.1 µm2/s) experiments. The high precision and accuracy of the polymeric lithography editor (PLE) system stemmed from coupling piezoelectric actuators to an inverted optical microscope. Subsequently after erasing the patterns using agarose erasers, a polydimethylsiloxane probe fabricated from the same conical track-etched template was used to precisely redeposit molecules of interest at the erased spots. PLE also provides a continuous optical feedback throughout the entire molecular editing process-writing, erasing, and rewriting. To demonstrate its potential in device fabrication, we used PLE to electrochemically erase metallic copper thin film, forming an interdigitated array of microelectrodes for the fabrication of a functional microphotodetector device. High-throughput dot and line erasing, writing with the conical "wet nanosponge," and continuous optical feedback make PLE complementary to the existing catalog of nanolithographic/microlithographic and three-dimensional printing techniques. This new PLE technique will potentially open up many new and exciting avenues in lithography, which remain unexplored due to the inherent limitations in error rectification capabilities of the existing lithographic techniques.

Ultracompact beam splitters based on plasmonic nanoslits.

An ultracompact plasmonic beam splitter is theoretically and numerically investigated. The splitter consists of a V-shaped nanoslit in metal films. Two groups of nanoscale metallic grooves inside the slit (A) and at the small slit opening (B) are investigated. We show that there are two energy channels guiding light out by the splitter: the optical and the plasmonic channels. Groove A is used to couple incident light into the plasmonic channel. Groove B functions as a plasmonic scatter. We demonstrate that the energy transfer through plasmonic path is dominant in the beam splitter. We find that more than four times the energy is transferred by the plasmonic channel using structures A and B. We show that the plasmonic waves scattered by B can be converted into light waves. These light waves redistribute the transmitted energy through interference with the field transmitted from the nanoslit. Therefore, different beam splitting effects are achieved by simply changing the interference conditions between the scattered waves and the transmitted waves. The impact of the width and height of groove B are also investigated. It is found that the plasmonic scattering of B is changed into light scattering with increase of the width and the height of B. These devices have potential applications in optical sampling, signal processing, and integrated optical circuits.