A Novel Label-Free Electrochemical Immunosensor for the Detection of Thyroid Transcription Factor 1 Using Ribbon-like Tungsten Disulfide-Reduced Graphene Oxide Nanohybrids and Gold Nanoparticles.

Thyroid transcription factor 1 (TTF1) is an important cancer-related biomarker for clinical diagnosis, especially for carcinomas of lung and thyroid origin. Herein, a novel label-free electrochemical immunosensor was prepared for TTF1 detection based on nanohybrids of ribbon-like tungsten disulfide-reduced graphene oxide (WS2-rGO) and gold nanoparticles (AuNPs). The proposed immunosensor employed H2O2 as the electrochemical probe because of the excellent peroxidase-like activity of ribbon-like WS2-rGO. The introduction of AuNPs not only enhanced the electrocatalytic activity of the immunosensor, but also provided immobilization sites for binding TTF1 antibodies. The electrochemical signals can be greatly amplified due to their excellent electrochemical performance, which realized the sensitive determination of TTF1 with a wide linear range of 0.025-50 ng mL-1 and a lower detection limit of 0.016 ng mL-1 (S/N = 3). Moreover, the immunosensor exhibited high selectivity, good reproducibility, and robust stability, as well as the ability to detect TTF1 in human serum with satisfactory results. These observed properties of the immunosensor enhance its potential practicability in clinical applications. This method can also be used for the detection of other tumor biomarkers by using the corresponding antigen-antibody complex.

Aptamer-Assisted Blockade of the Immune Suppressor Sialic Acid-Binding Immunoglobulin-Like Lectin-15 for Cancer Immunotherapy.

The percentage of low response and adaptive resistance to current antibody-based immune checkpoint blockade (ICB) therapy requires the development of novel immunotherapy strategies. Here, we developed an aptamer-assisted immune checkpoint blockade (Ap-ICB) against sialic acid-binding immunoglobulin-like lectin-15 (Siglec-15), a novel immune suppressor broadly upregulated on cancer cells and tumor infiltrating myeloid cells, which is mutually exclusive of programmed cell death ligand 1 (PD-L1). Using protein aptamer selection, we identified WXY3 aptamer with high affinity against Siglec-15 protein/Siglec-15 positive cells. We demonstrated that WXY3 aptamer rescued antigen-specific T cell responses in vitro and in vivo. Importantly, the WXY3 Ap-ICB against Siglec-15 amplified anti-tumor immunity in the tumor microenvironment and inhibited tumor growth/metastasis in syngeneic mouse model, which may result from enhanced macrophage and T cell functionality. In addition, by using aptamer-based spherical nucleic acids, we developed a synergetic ICB strategy of multivalent binding and steric hindrance, which further improves the in vivo anti-tumor effect. Taken together, our results support Ap-ICB targeted Siglec-15 as a potential strategy for normalization cancer immunotherapy.

Highly Sensitive and Automated Surface Enhanced Raman Scattering-based Immunoassay for H5N1 Detection with Digital Microfluidics.

Digital microfluidics (DMF) is a powerful platform for a broad range of applications, especially immunoassays having multiple steps, due to the advantages of low reagent consumption and high automatization. Surface enhanced Raman scattering (SERS) has been proven as an attractive method for highly sensitive and multiplex detection, because of its remarkable signal amplification and excellent spatial resolution. Here we propose a SERS-based immunoassay with DMF for rapid, automated, and sensitive detection of disease biomarkers. SERS tags labeled with Raman reporter 4-mercaptobenzoic acid (4-MBA) were synthesized with a core@shell nanostructure and showed strong signals, good uniformity, and high stability. A sandwich immunoassay was designed, in which magnetic beads coated with antibodies were used as solid support to capture antigens from samples to form a beads-antibody-antigen immunocomplex. By labeling the immunocomplex with a detection antibody-functionalized SERS tag, antigen can be sensitively detected through the strong SERS signal. The automation capability of DMF can greatly simplify the assay procedure while reducing the risk of exposure to hazardous samples. Quantitative detection of avian influenza virus H5N1 in buffer and human serum was implemented to demonstrate the utility of the DMF-SERS method. The DMF-SERS method shows excellent sensitivity (LOD of 74 pg/mL) and selectivity for H5N1 detection with less assay time (<1 h) and lower reagent consumption (∼30 µL) compared to the standard ELISA method. Therefore, this DMF-SERS method holds great potentials for automated and sensitive detection of a variety of infectious diseases.

DNA-Mediated Morphological Control of Silver Nanoparticles.

It is demonstrated that DNA can be used to control the synthesis of silver nanoplates with different morphologies using spherical silver seeds. UV-vis spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy are used to characterize the synthesized nanoparticles. Silver nanoprisms are encoded by poly C and poly G, while silver flower bouquets and silver nanodiscs are synthesized using poly A and poly T, respectively. The length of DNA is found to have little effect on the morphology of silver nanoparticles. Moreover, the synthesized silver nanoplates are found to have high surface enhanced Raman scattering enhancement ability, good antibacterial activity, and good biocompatibility. These discoveries will broaden the application of DNA in nanoscience and will provide a new platform to investigate the interaction between DNA sequences and silver nanoparticles.

Recent Progress in Aptamer-Based Functional Probes for Bioanalysis and Biomedicine.

Nucleic acid aptamers are short synthetic DNA or RNA sequences that can bind to a wide range of targets with high affinity and specificity. In recent years, aptamers have attracted increasing research interest due to their unique features of high binding affinity and specificity, small size, excellent chemical stability, easy chemical synthesis, facile modification, and minimal immunogenicity. These properties make aptamers ideal recognition ligands for bioanalysis, disease diagnosis, and cancer therapy. This review highlights the recent progress in aptamer selection and the latest applications of aptamer-based functional probes in the fields of bioanalysis and biomedicine.

A logical molecular circuit for programmable and autonomous regulation of protein activity using DNA aptamer-protein interactions.

Researchers increasingly envision an important role for artificial biochemical circuits in biological engineering, much like electrical circuits in electrical engineering. Similar to electrical circuits, which control electromechanical devices, biochemical circuits could be utilized as a type of servomechanism to control nanodevices in vitro, monitor chemical reactions in situ, or regulate gene expressions in vivo. (1) As a consequence of their relative robustness and potential applicability for controlling a wide range of in vitro chemistries, synthetic cell-free biochemical circuits promise to be useful in manipulating the functions of biological molecules. Here, we describe the first logical circuit based on DNA-protein interactions with accurate threshold control, enabling autonomous, self-sustained and programmable manipulation of protein activity in vitro. Similar circuits made previously were based primarily on DNA hybridization and strand displacement reactions. This new design uses the diverse nucleic acid interactions with proteins. The circuit can precisely sense the local enzymatic environment, such as the concentration of thrombin, and when it is excessively high, a coagulation inhibitor is automatically released by a concentration-adjusted circuit module. To demonstrate the programmable and autonomous modulation, a molecular circuit with different threshold concentrations of thrombin was tested as a proof of principle. In the future, owing to tunable regulation, design modularity and target specificity, this prototype could lead to the development of novel DNA biochemical circuits to control the delivery of aptamer-based drugs in smart and personalized medicine, providing a more efficient and safer therapeutic strategy.

Sensitive, Rapid, and Automated Detection of DNA Methylation Based on Digital Microfluidics.

Biomarkers based on DNA methylation have attracted wide attention in biomedical research due to their potential clinical value. Therefore, a sensitive and accurate method for DNA methylation detection is highly desirable for the discovery and diagnostics of human diseases, especially cancers. Here, an integrated, low-cost, and portable point-of-care (POC) device is presented to analyze DNA methylation, which integrates the process of pyrosequencing in a digital microfluidic chip. Without additional equipment and complicated operation, droplets are manipulated by patterned electrodes with individually programmed control. The system exhibited an excellent sensitivity with a limit of detection (LOD) of 10 pg and a comparable checkout down to 5% methylation level within 30 min, which offered a potential substitute for the detection of DNA methylation. With the advantages of portability, ease of use, high accuracy, and low cost, the POC platform shows great potential for the analysis of tumor-specific circulating DNA.

Digital-WGS: Automated, highly efficient whole-genome sequencing of single cells by digital microfluidics.

Single-cell whole-genome sequencing (WGS) is critical for characterizing dynamic intercellular changes in DNA. Current sample preparation technologies for single-cell WGS are complex, expensive, and suffer from high amplification bias and errors. Here, we describe Digital-WGS, a sample preparation platform that streamlines high-performance single-cell WGS with automatic processing based on digital microfluidics. Using the method, we provide high single-cell capture efficiency for any amount and types of cells by a wetted hydrodynamic structure. The digital control of droplets in a closed hydrophobic interface enables the complete removal of exogenous DNA, sufficient cell lysis, and lossless amplicon recovery, achieving the low coefficient of variation and high coverage at multiple scales. The single-cell genomic variations profiling performs the excellent detection of copy number variants with the smallest bin of 150 kb and single-nucleotide variants with allele dropout rate of 5.2%, holding great promise for broader applications of single-cell genomics.

Auto-affitech: an automated ligand binding affinity evaluation platform using digital microfluidics with a bidirectional magnetic separation method.

The dissociation constant (Kd) is a crucial parameter for characterizing binding affinity in molecular recognition, including antigen-antibody, DNA-protein, and receptor-ligand interactions. However, conventional methods for Kd characterization usually involve a multi-step process and time-consuming operations for incubation, washing, and detection, thus causing problems, such as time delays, microbead loss, degradation of sensitive molecules, and personal errors. Here we demonstrate an automated ligand binding affinity evaluation platform (Auto-affitech) using digital microfluidics (DMF), with individual droplets at the microliter level, programmed to rapidly perform the incubation and separation of target-beads and binding ligands. Because the loss of the beads influences the detection results, we propose a new strategy for magnetic bead separation using DMF, termed the bidirectional separation method. By splitting one droplet into two asymmetric droplets, high bead retention efficiency (89.57% ± 0.05%) and high washing efficiency (99.59% ± 0.17%, with four washings) were obtained. We demonstrate the determination of Kd of an aptamer-protein system (EpCAM and its corresponding aptamer SYL3C) and an antigen-antibody system (H5N1 antigen and antibody), proving the capability and universality of Auto-affitech in various receptor-ligand systems. Integrating all the sample processing procedures, the Auto-affitech not only saves manual labor and minimizes personal errors, but also conserves samples and shortens analysis time. Overall, this platform successfully demonstrates to be an automated approach for dissociation constant evaluation and exhibits great potential for highly efficient screening of ligands.

Aptamer-tagged silver nanoclusters for cell image and Mucin1 detection in vitro.

Development of specific cell imaging technology for accurate tumor early diagnosis and evaluation of drug therapeutic efficiency is in great demand. In this study, a simple and sensitive fluorescence method for Mucin1 (MUC1) image in situ and quantitative assay in vitro has been established using APT-tagged silver nanoclusters (APT-Agnes) containing a recognition unit of MUC1 aptamer as the label-free fluorescence probe. The principle of the method is that specific recognition and binding of MUC1 with aptamer can result in the fluorescence quenching of APT-Agnes. The method for MUC1 assay showed a linear range from 0.1 to 100 NM with a limit of detection of 0.05 nM. Furthermore, the fluorescent probe of APT-AgNCs was successfully used for detection of MUC1 in serum and MCF-7 cell imaging. In our point, the above results demonstrated that the new simple method provided an alternative for direct quantitative assay of MUC1 in homogeneous solution and cell imaging, which is helpful for biomedical study and clinical diagnosis related with MUC1.

Rapid, real-time chemiluminescent detection of DNA mutation based on digital microfluidics and pyrosequencing.

To explore genome mutation meaningfully, it is in urgent need to develop an automated and inexpensive platform for DNA mutation analysis. Digital microfluidics is a powerful platform for a broad range of applications due to the advantages of high automatization and low reagent consumption. Pyrosequencing enables DNA sequencing based on non-electrophoresis bioluminescence, which is suitable for rapid and sensitive analysis of short sequences. Herein, we describe a palmtop sequencing platform for automatic, real-time and portable analysis of DNA mutations, which is based on the pyrosequencing principle and implemented by digital microfluidics. The portable system can sequence a DNA template with up to 53 bp with 100% accuracy within 2 h. Mutation in the KRAS gene can be detected within 30 min with a LOD as low as 5% mutant level. Portable and accurate gender identification was further demonstrated by sequencing a short amelogenin fragment. With the advantages of portability, ease of use, high accuracy, and low cost, the palmtop sequencing platform shows great potential for portable genetic testing in a variety of circumstances.

In Situ Pt Staining Method for Simple, Stable, and Sensitive Pressure-Based Bioassays.

Pressure-based bioassays (PASS) integrate a molecular recognition process with a catalyzed gas generation reaction, enabling sensitive and portable quantitation of biomarkers in clinical samples. Using platinum nanoparticles (PtNPs) as a catalyst has significantly improved the sensitivity of PASS compared with protein enzyme-based detection. However, PtNPs are easily deactivated during storage or after being decorated with antibodies. Moreover, nonspecific adsorption of PtNPs on substrates has been a problem, resulting in significant backgrounds. To solve these problems of PtNP-based detection, we report a robust, simple, stable, and sensitive Pt staining method for PASS. Detection antibody-decorated gold nanoparticles (AuNPs) are used to perform enzyme-linked immunosorbent assay, followed by Pt staining to stain AuNPs with Ag and Pt bimetallic shells (Au@AgPtNPs), which endow AuNPs with catalytic activity. The concentration of targets can be quantitatively determined by measuring the pressure due to O2 gas (g) formed by the decomposition of H2O2 catalyzed by Au@AgPtNPs. C-reactive protein and avian influenza hemagglutinin 5 neuraminidase 1 can be quantitatively detected with detection limits of 0.015 and 0.065 ng/mL, respectively. The simple, stable, and sensitive properties of the Pt staining-based method will largely broaden the applications of PASS in clinical diagnosis and biomedicine.

Lateral flow assay with pressure meter readout for rapid point-of-care detection of disease-associated protein.

Paper-based assays such as lateral flow assays are good candidates for portable diagnostics owing to their user-friendly format and low cost. In terms of analytical detection, lateral flow assays usually require dedicated instruments to obtain quantitative results. Here we demonstrate a lateral flow assay with handheld pressure meter readout for the rapid detection of disease-related protein with high sensitivity and selectivity. Based on the pressure change produced by the catalytic reaction of Pt nanoparticles related to the concentration of the target, a quantitative reaction platform was established. During the lateral flow assay, the Pt nanoparticles are aggregated in the test line to form a gray band by biomolecular recognition and finally convert the recognition signal into highly sensitive pressure readout for quantitative analysis. Without sophisticated instrumentation and complicated operations, the whole detection process can be completed within 20 minutes. The limit of detection for myoglobin (2.9 ng mL-1 in diluted serum samples) meets the requirements of clinical monitoring. With the advantages of low cost, ease of operation, high sensitivity and selectivity, the method represents a versatile platform for point-of-care testing of disease biomarkers.

One-dimensional microfluidic beads array for multiple mRNAs expression detection.

A one-dimensional microfluidic beads array for in vitro rapid measurement of multiple mRNAs expression is presented in this paper. Gene specific capture DNA-functional beads were deposited along a microchannel to form an addressable beads array. We demonstrated that the one-dimensional beads array could perform simultaneous multiple nucleic acid targets detection and a DNA detection limit of 0.02 nM was obtained. Using this array, transcripts expression of three tumor-associated genes, including p53, H-ras, and NME1, both in CNE2 nasopharyngeal carcinoma cell lines and in normal human nasopharyngeal epithelial cells were evaluated. The responses of these three genes expression in CNE2 cells to 5-flouorouracil (5-Fu) stimuli were also assessed. Validation of these results was performed using reverse transcriptase-PCR. The presented methodology combines high throughput of microarrays and low sample consumption, convenient liquid handling of microfluidics. It enables rapid and facile determination of multi-gene expression and holds great potential in early cancer diagnostics and molecular biology.

A fully integrated distance readout ELISA-Chip for point-of-care testing with sample-in-answer-out capability.

Enzyme-linked immunosorbent assay (ELISA) is a popular laboratory technique for detection of disease-specific protein biomarkers with high specificity and sensitivity. However, ELISA requires labor-intensive and time-consuming procedures with skilled operators and spectroscopic instrumentation. Simplification of the procedures and miniaturization of the devices are crucial for ELISA-based point-of-care (POC) testing in resource-limited settings. Here, we present a fully integrated, instrument-free, low-cost and portable POC platform which integrates the process of ELISA and the distance readout into a single microfluidic chip. Based on manipulation using a permanent magnet, the process is initiated by moving magnetic beads with capture antibody through different aqueous phases containing ELISA reagents to form bead/antibody/antigen/antibody sandwich structure, and finally converts the molecular recognition signal into a highly sensitive distance readout for visual quantitative bioanalysis. Without additional equipment and complicated operations, our integrated ELISA-Chip with distance readout allows ultrasensitive quantitation of disease biomarkers within 2h. The ELISA-Chip method also showed high specificity, good precision and great accuracy. Furthermore, the ELISA-Chip system is highly applicable as a sandwich-based platform for the detection of a variety of protein biomarkers. With the advantages of visual analysis, easy operation, high sensitivity, and low cost, the integrated sample-in-answer-out ELISA-Chip with distance readout shows great potential for quantitative POCT in resource-limited settings.

A portable visual detection method based on a target-responsive DNA hydrogel and color change of gold nanorods.

A new method based on a functional DNA crosslinked hydrogel as a target-responsive unit and gold nanorods (AuNRs) as a multicolor signal readout circuit was developed for the sensitive and visual detection of different targets. The color variation of the AuNR solution was correlated with the concentration of the target. This system can be extended to detect various targets by designing the corresponding target-responsive DNA hydrogels.

Distance-based microfluidic quantitative detection methods for point-of-care testing.

Equipment-free devices with quantitative readout are of great significance to point-of-care testing (POCT), which provides real-time readout to users and is especially important in low-resource settings. Among various equipment-free approaches, distance-based visual quantitative detection methods rely on reading the visual signal length for corresponding target concentrations, thus eliminating the need for sophisticated instruments. The distance-based methods are low-cost, user-friendly and can be integrated into portable analytical devices. Moreover, such methods enable quantitative detection of various targets by the naked eye. In this review, we first introduce the concept and history of distance-based visual quantitative detection methods. Then, we summarize the main methods for translation of molecular signals to distance-based readout and discuss different microfluidic platforms (glass, PDMS, paper and thread) in terms of applications in biomedical diagnostics, food safety monitoring, and environmental analysis. Finally, the potential and future perspectives are discussed.

Design and synthesis of target-responsive hydrogel for portable visual quantitative detection of uranium with a microfluidic distance-based readout device.

Due to uranium's increasing exploitation in nuclear energy and its toxicity to human health, it is of great significance to detect uranium contamination. In particular, development of a rapid, sensitive and portable method is important for personal health care for those who frequently come into contact with uranium ore mining or who investigate leaks at nuclear power plants. The most stable form of uranium in water is uranyl ion (UO2(2+)). In this work, a UO2(2+) responsive smart hydrogel was designed and synthesized for rapid, portable, sensitive detection of UO2(2+). A UO2(2+) dependent DNAzyme complex composed of substrate strand and enzyme strand was utilized to crosslink DNA-grafted polyacrylamide chains to form a DNA hydrogel. Colorimetric analysis was achieved by encapsulating gold nanoparticles (AuNPs) in the DNAzyme-crosslinked hydrogel to indicate the concentration of UO2(2+). Without UO2(2+), the enzyme strand is not active. The presence of UO2(2+) in the sample activates the enzyme strand and triggers the cleavage of the substrate strand from the enzyme strand, thereby decreasing the density of crosslinkers and destabilizing the hydrogel, which then releases the encapsulated AuNPs. As low as 100nM UO2(2+) was visually detected by the naked eye. The target-responsive hydrogel was also demonstrated to be applicable in natural water spiked with UO2(2+). Furthermore, to avoid the visual errors caused by naked eye observation, a previously developed volumetric bar-chart chip (V-Chip) was used to quantitatively detect UO2(2+) concentrations in water by encapsulating Au-Pt nanoparticles in the hydrogel. The UO2(2+) concentrations were visually quantified from the travelling distance of ink-bar on the V-Chip. The method can be used for portable and quantitative detection of uranium in field applications without skilled operators and sophisticated instruments.

A pressure-based bioassay for the rapid, portable and quantitative detection of C-reactive protein.

A portable method for the rapid detection of the disease biomarker C-reactive protein (CRP) with a hand-held pressuremeter was developed. The method allows an ultrasensitive quantitation of CRP within the entire clinical range. The pressure-based method could facilitate CRP measurements in point-of-care testing (POCT) scenarios, such as clinical offices, emergency departments, and community service centers.

Portable visual quantitative detection of aflatoxin B1 using a target-responsive hydrogel and a distance-readout microfluidic chip.

Aflatoxin B1 (AFB1), as the secondary metabolite of molds, is the most predominant and toxic mycotoxin that seriously threatens the health of humans and animals. In this work, an AFB1-responsive hydrogel was synthesized for highly sensitive and portable detection of AFB1. The AFB1-responsive hydrogel was prepared using an AFB1 aptamer and its two short complementary DNA strands as cross-linkers. For visual detection of AFB1, the hydrogel is preloaded with gold nanoparticles (AuNPs). Upon introduction of AFB1, the AFB1 aptamer binds with AFB1, leading to the disruption of the hydrogel and release of the AuNPs with a distinct color change of the supernatant from colorless to red. In order to lower the detection limit and extend the method to quantitative analysis, a distance-readout volumetric bar chart chip (V-chip) was combined with an AFB1-responsive hydrogel preloaded with platinum nanoparticles (PtNPs). In the presence of AFB1, the hydrogel collapses and releases PtNPs which can catalyze the decomposition of H2O2 to generate O2. The increasing gas pressure moves a red ink bar in the V-chip and provides a quantitative relationship between the distance and the concentration of AFB1. The method was applied for detection of AFB1 in beer, with a detection limit of 1.77 nM (0.55 ppb) where an immunoaffinity column (IAC) of AFB1 was used to cleanup and pre-concentrate the sample, which satisfies the testing requirement of 2.0 ppb set by the European Union. The combination of an AFB1-responsive hydrogel with a distance-based readout V-chip offers a user-friendly POCT device, which has great potential for rapid, portable, selective, and quantitative detection of AFB1 in real samples to ensure food safety and avoid subsequent economic losses.