A new simplified sequence-dependent loop-mediated isothermal amplification (LAMP) detection method.

Fluorescence dye-based loop-mediated isothermal amplification (LAMP) is a sensitive nucleic acid detection method, but is limited to single-plex detection and may yield non-specific signals. In this study, we propose a bifunctional probe-based real-time LAMP amplification method for single-plexed or multiplexed detection. The bifunctional probe is derived by modifying the 5' end of the fluorophore and an internal quencher on one of the LAMP primers; therefore, it can simultaneously be involved in the LAMP process and signal amplification. The fluorescence intensity undergoes a cumulative exponential increase during the incorporation of the bifunctional probe into double-stranded DNA amplicons. The bifunctional probe-based LAMP method is simplified and cost-effective, as the primer design and experimental operations align entirely with the ordinary LAMP. Different from other current probe-based methods, this method does not require additional enzymes, sequences, or special probe structures. Also, it is 10 min faster than several other probe-based LAMP methods. The bifunctional probe-based LAMP method allows the simultaneous detection of the target Vibrio parahaemolyticus DNA and the internal amplification control in a one-pot reaction, demonstrating its potential for multiplexed detection.

Ultrahigh Modulation Enhancement in All-Optical Si-Based THz Modulators Integrated with Gold Nanobipyramids.

Optical regulation strategy with the aid of hybrid materials can significantly optimize the performance of terahertz devices. Gold nanobipyramids (AuNBPs) with synthetical tunability to the near-infrared band show strong local field enhancement, which improves optical coupling at the interface and benefits the modulation performance. We design AuNBPs-integrated terahertz modulators with multiple structured surfaces and demonstrate that introducing AuNBPs can effectively enhance their modulation depths. In particular, an ultrahigh modulation enhancement of 1 order of magnitude can be achieved in the AuNBPs hybrid metamaterials accompanied by the multifunctional modulation characteristics. By application of the coupled Lorentz oscillator model, the theoretical calculation suggests that the optical regulation with AuNBPs originates from increased damping rate and higher coupling coefficient under pump excitation. Additionally, a terahertz spatial light modulator is constructed to demonstrate multiple imaging display and consume extremely low power, which is promising for the potential application in spatial and frequency selective imaging.

Modular Synthesis of a Tridecasaccharide Motif of Bacteroides vulgatus Lipopolysaccharides against Inflammatory Bowel Diseases through an Orthogonal One-Pot Glycosylation Strategy.

Lipopolysaccharides from Bacteroides vulgatus represent interesting targets for the treatment of inflammatory bowel diseases. However, efficient access to long, branched and complex lipopolysaccharides remains challenging. Herein, we report the modular synthesis of a tridecasaccharide from Bacteroides vulgates through an orthogonal one-pot glycosylation strategy based on glycosyl ortho-(1-phenylvinyl)benzoates, which avoids the issues of thioglycoside-based one-pot synthesis. Our approach also features: 1) 5,7-O-di-tert-butylsilylene-directed glycosylation for stereoselective construction of the α-Kdo linkage; 2) hydrogen-bond-mediated aglycone delivery for the stereoselective formation of ß-mannosidic bonds; 3) remote anchimeric assistance for stereoselective assembly of the α-fucosyl linkage; 4) several orthogonal one-pot synthetic steps and strategic use of orthogonal protecting groups to streamline oligosaccharide assembly; 5) convergent [1+6+6] one-pot synthesis of the target.

[Research on Management Efficiency of Hospital Low-value Consumables in Nursing Unit under Lean Management Mode].

Aiming at the management efficiency problems in the traditional medical low-value consumables management mode of the nursing unit, based on the perspective of supply chain management, this study uses lean management method to construct the lean management mode of low-value consumables with a whole cycle and whole process information monitoring, and analyzes the application effect of this mode. The results show that after the application of lean management mode, the low-value consumables of the nursing unit can achieve "consumables in use=priced consumables + un-priced consumables", the settlement cost is significantly reduced and its stability is high, and the efficiency of "supply-inventor-distribution" link is significantly enhanced. This model effectively improves the management efficiency of low-value consumables in the hospital, and also provides a reference for other hospitals to improve the management level of low-value consumables.

[Practice of Refined Management of in Vitro Diagnostic Reagents Based on SPD in Hospital].

The management of in vitro diagnostic reagents has always been a concern. This paper describes the application of SPD medical consumables fine management system in our hospital. Relying on the brand-new management mode, the whole process from supplier qualification certificate management, in vitro diagnostic reagent procurement management, secondary warehouse management, and then to the use process traceability was realized. The monthly cost of in vitro diagnostic reagents can be accurately counted, which effectively controls the cost of in vitro diagnostic reagents.

Influence of micro-structure on modulation properties in VO2 composite terahertz memory metamaterials.

We have grown VO2 films and combined with terahertz metamaterials to manipulate the memory effect during the insulator-to-metal transition. The temperature-dependent resonant frequency of hybrid structure shows a thermal hysteresis accompanied with frequency shift and bandwidth variation due to the presence of a VO2 dielectric layer. This frequency memory effect significantly depends on the metallic micro-structure. Further theoretical calculation demonstrates this phenomenon mainly originates from the different coupling strength between VO2 and metallic structures. Our findings could facilitate the application of VO2 films in the smart window and dynamical terahertz modulators.

High extinction ratio terahertz broadband polarizer based on the aligned Ni nanowire arrays.

We present a broadband terahertz (THz) polarizer based on the stacks of aligned Ni nanowire (NW) arrays. We demonstrated that the polarizer has an extinction ratio of 58.8 dB and an average extinction ratio of 46.6 dB throughout a frequency range of 0.3-2.3 THz. Compared to carbon-nanotube and metallic wire-grid polarizers, our Ni-NW polarizers with rapid, reliable, low-cost fabrication processes are ideal candidates for emerging THz technologies.

Synthesis of Amino Acids by Base-Enhanced Photoredox Decarboxylative Alkylation of Aldimines.

A photoredox decarboxylative coupling of N-hydroxyphthalimide esters with aldimines is reported for synthesizing α-amino esters. A broad scope of alkyl radicals generated under visible light irradiation adds to glyoxylate aldimines in reliably good to excellent yields. Adding inorganic bases such as potassium carbonate significantly enhanced the yields by suppressing the umpolung side reaction. The computation study suggests that the base facilitates hydrogen atom transfer from the radical cation of Hantzsch ester to the N-centered radical intermediates. Introducing amino acid side chains into natural products and drug molecules by this method is demonstrated.

[Construction of Quality Control System for Medical Equipment under the Model of County Medical Service Community].

The construction of county and district medical community is an important measure for high-quality medical resources to "double sink and improve". In this study, we have initially constructed a medical equipment quality control system for members of the regional medical community. The current situation of lack of professional medical equipment management personnel and quality control equipment in primary medical institutions has been alleviated, the quality control level of medical equipment in primary medical institutions has been improved, and a new management model for quality control of primary medical equipment has been explored.

Resonance coupling and polarization conversion in terahertz metasurfaces with twisted split-ring resonator pairs.

We investigate edge-coupling of twisted split-ring resonator (SRR) pairs in the terahertz (THz) frequency range. Using a simple coupled-resonator model we show that such a system exhibits resonance splitting and cross-polarization conversion. Numerical simulations and experimental measurements agree well with theoretical calculations, verifying the resonance splitting as a function of the coupling strength given by the SRR separation. We further show that a metal ground plane can be integrated to significantly enhance the resonance coupling, which enables the effective control of resonance splitting and the efficiency and bandwidth of the cross-polarization conversion. Our findings improve the fundamental understanding of metamaterials with a view of accomplishing metamaterial functionalities with enhanced performance, which is of great interest in realizing THz functional devices required in a variety of applications.

Modeling of joint extraction of entity relationships in clinical electronic medical records.

The advancement of medical informatization necessitates extracting entities and their relationships from electronic medical records. Presently, research on electronic medical records predominantly concentrates on single-entity relationship extraction. However, clinical electronic medical records frequently exhibit overlapping complex entity relationships, thereby heightening the challenge of information extraction. To rectify the absence of a clinical medical relationship extraction dataset, this study utilizes electronic medical records from 584 patients in a hospital to create a compact clinical medical relationship extraction dataset. To address the pipelined relationship extraction model's limitation in overlooking the one-to-many correlation problem between entities and relationships, this paper introduces a cascading relationship extraction model. This model integrates the MacBERT pre-training model, gated recurrent network, and multi-head self-attention mechanism to enhance the extraction of text features. Simultaneously, adversarial learning is incorporated to bolster the model's robustness. In scenarios involving one-to-many relationships between entities, a two-phase task is employed. Initially, the main entity is predicted, followed by predicting the associated object and their correspondences. Employing this cascade-structured approach enables the model to flexibly manage intricate entity relationships, thereby enhancing extraction accuracy. Experimental results demonstrate the model's efficiency, yielding F1-scores of 82.8%, 76.8%, and 88.2% for fulfilling relational extraction requirements and tasks on DuIE, CHIP-CDEE, and private datasets, respectively. These scores represent improvements over the benchmark model. The findings indicate the model's applicability in practical domains, particularly in tasks such as biomedical information extraction.

Extrafibrillar demineralization: Yes or no?

OBJECTIVE: Extrafibrillar demineralization is considered to be an ideal solution for addressing the durability of resin-dentin bonding interfaces. However, its theoretical basis is contradictory to ionization equilibrium of hydroxyapatite dissolution. In this study, various calcium chelators were selected as dentin conditioners to explore the essence of dentin demineralization with chelators and its effect on resin-dentin adhesion. METHODS: Polyethyleneimine grafted with EDTA and polyacrylic acid sodium (PAAN450k) larger than 40 kDa, as well as PAAN (PAAN3k) and EDTA smaller than 6 kDa, were prepared as dentin conditioners. The dentin powder was designed to characterize whether it would demineralize without contact with PAAN450k. Dentin demineralization effect with four conditioners was evaluated with field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, atomic force microscopy and quantification of hydroxyproline concentration after enzymatic degradation. Micro-tensile bond strength (µTBS) test and failure mode analysis were employed to assess the bonding effect of the four chelators in both wet and dry bonding, with H3PO4 wet bonding serving as the control group. RESULTS: Demineralization occurs when PAAN450k was not in direct contact with the dentin powder. The extrafibrillar demineralization cannot be induced by any chelator regardless of its molecular weight. Complete demineralization including extrafibrillar and intrafibrillar demineralization would occur with sufficient interaction time. Moreover, chelators could not provide a reliable dentin bonding effect under a short interaction time. SIGNIFICANCE: From the perspective of theory and application, extrafibrillar demineralization is not a reliable strategy, which provides a reminder for exploring new strategies in the future.

Diagnostic values of different musculoskeletal ultrasound signs, serum uric acid, and their combined detection for gouty arthritis.

Objectives: The study aimed to investigate the diagnostic values of different musculoskeletal ultrasound (MSUS) signs, serum uric acid (SUA), and their combined detection for gouty arthritis (GA). Patients and methods: In this retrospective study, 70 patients (62 males, 8 females; mean age: 46.1±14.1 years; range, 25 to 86 years) diagnosed with GA (the GA group) between August 2022 and March 2023 and 70 patients (54 females, 16 males; mean age: 49.0±14.1 years; range, 21 to 75 years) diagnosed with rheumatoid arthritis and osteoarthritis during the same period (the non-GA group) were included. The positive rate of MSUS signs and SUA in both groups was recorded to compare the differences. The correlations of MSUS signs and SUA with GA were analyzed using Spearman's rank correlation analysis. The diagnostic values of different MSUS signs, SUA, and their combined detection for GA were analyzed using a receiver operating characteristic, the area under the curve (AUC), sensitivity, specificity, and the Youden index. Results: The positive rate of the double contour (DC) sign (chi-squared [χ2 ]=102.935, p<0.001), hyperechoic spots (χ2=56.395, p<0.001), bone erosions (χ2 =10.080, p<0.001), and SUA (χ2 =41.117, p <0.001) were higher in the GA group than in the non-GA group. The positive rate of the DC sign (rs=0.829, p=0.001), hyperechoic spots (rs=0.631, p<0.001), bone erosion (rs=0.268, p=0.001), and SUA (rs=0.542, p<0.001) were positively correlated with GA. Among the single-indicator measures, the DC sign exhibited the highest diagnostic value (AUC=0.907, sensitivity=81.4%, specificity=100%, p<0.001). Among the combined-indicator measures, the DC sign combined with SUA exhibited the highest diagnostic value (AUC=0.929, sensitivity=91.4%, specificity=94.3%, p<0.001), higher than DC sign detection alone. Conclusion: The DC sign combined with SUA yielded a high diagnostic value and can thus provide a reliable basis for effectively and efficiently diagnosing GA.

Highly stereoselective α-glycosylation with GalN3 donors enabled collective synthesis of mucin-related tumor associated carbohydrate antigens.

Mucin-related tumor-associated carbohydrate antigens (TACAs) are important and interesting targets for cancer vaccine therapy. However, efficient access to a library of mucin-related TACAs remains a challenging task. One of the key issues is the challenging construction of α-GalNAc linkages. Here, we report highly stereoselective α-glycosylation with GalN3N-phenyl trifluoroacetimidate donors, which features excellent yields, outstanding stereoselectivities, broad substrate scope and mild reaction conditions. This method is successfully applied to highly stereoselective synthesis of GalN3-α-O-Ser, which served as the common intermediate for collective synthesis of a wide range of TACAs including TN antigen, STN antigen, 2,6 STF antigen, 2,3 STF antigen, glycophorin and cores 1-8 mucin-type O-glycans. In particular, the rationale for this highly stereoselective α-glycosylation is provided for the first time using DFT calculations and mechanistic studies, highlighting the crucial roles of reagent combinations (TMSI and Ph3PO) and the H-bonding directing effect of the N3 group.

High-performance terahertz modulators induced by substrate field in Te-based all-2D heterojunctions.

High-performance active terahertz modulators as the indispensable core components are of great importance for the next generation communication technology. However, they currently suffer from the tradeoff between modulation depth and speed. Here, we introduce two-dimensional (2D) tellurium (Te) nanofilms with the unique structure as a new class of optically controlled terahertz modulators and demonstrate their integrated heterojunctions can successfully improve the device performances to the optimal and applicable levels among the existing all-2D broadband modulators. Further photoresponse measurements confirm the significant impact of the stacking order. We first clarify the direction of the substrate-induced electric field through first-principles calculations and uncover the unusual interaction mechanism in the photoexcited carrier dynamics associated with the charge transfer and interlayer exciton recombination. This advances the fundamental and applicative research of Te nanomaterials in high-performance terahertz optoelectronics.

Reconfigurable optoelectronic transistors for multimodal recognition.

Biological nervous system outperforms in both dynamic and static information perception due to their capability to integrate the sensing, memory and processing functions. Reconfigurable neuromorphic transistors, which can be used to emulate different types of biological analogues in a single device, are important for creating compact and efficient neuromorphic computing networks, but their design remains challenging due to the need for opposing physical mechanisms to achieve different functions. Here we report a neuromorphic electrolyte-gated transistor that can be reconfigured to perform physical reservoir and synaptic functions. The device exhibits dynamics with tunable time-scales under optical and electrical stimuli. The nonlinear volatile property is suitable for reservoir computing, which can be used for multimodal pre-processing. The nonvolatility and programmability of the device through ion insertion/extraction achieved via electrolyte gating, which are required to realize synaptic functions, are verified. The device's superior performance in mimicking human perception of dynamic and static multisensory information based on the reconfigurable neuromorphic functions is also demonstrated. The present study provides an exciting paradigm for the realization of multimodal reconfigurable devices and opens an avenue for mimicking biological multisensory fusion.

Functional DNA sensors integrated with nucleic acid signal amplification strategies for non-nucleic acid targets detection.

In addition to carrying and transmitting genetic material, some DNA molecules have specific binding ability or catalytic function. DNA with this special function is collectively referred to as functional DNA (fDNA), such as aptamer, DNAzyme and so on. fDNA has the advantages of simple synthetic process, low cost and low toxicity. It also has high chemical stability, recognition specificity and biocompatibility. In recent years, fDNA biosensors have been widely investigated as signal recognition elements and signal transduction elements for the detection of non-nucleic acid targets. However, the main problem of fDNA sensors is their limited sensitivity to trace targets, especially when the affinity of fDNA to the targets is low. To further improve the sensitivity, various nucleic acid signal amplification strategies (NASAS) are explored to improve the limit of detection of fDNA. In this review, we will introduce four NASAS (hybridization chain reaction, entropy-driven catalysis, rolling circle amplification, CRISPR/Cas system) and the corresponding design principles. The principle and application of these fDNA sensors integrated with signal amplification strategies for detection of non-nucleic acid targets are summarized. Finally, the main challenges and application prospects of NASAS integrated fDNA biosensing system are discussed.

Dual-Band and Multi-State Polarization Conversion Using aTerahertz Symmetry-Breaking Metadevice.

We numerically and experimentally demonstrate a terahertz metadevice consisting of split-ring resonators (SRRs) present within square metallic rings. This device can function as a dual-band polarization converter by breaking the symmetry of SRRs. Under x-polarized incidence, the metastructure is able to convert linearly polarized (LP) light into a left-hand circular-polarized (LCP) wave. Intriguingly, under y-polarized incidence, frequency-dependent conversion from LP to LCP and right-hand circular-polarized (RCP) states can be achieved at different frequencies. Furthermore, reconfigurable LCP-to-LP and RCP-to-LP switching can be simulated by integrating the device with patterned graphene and changing its Fermi energy. This dual-band and multi-state polarization control provides an alternative solution to developing compact and multifunctional components in the terahertz regime.

Er:YAG Laser Physical Etching and Ultra-High-Molecular-Weight Cross-Linked Sodium Polyacrylate Chemical Etching for a Reliable Dentin Dry Bonding.

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization. The results that wet and dry bonding with Carbo-based demineralization produced a weaker bond strength than the traditional phosphoric acid wet adhesion suggested that the Carbo-based demineralization is an unreliable adhesion strategy. A novel protocol of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion revealed that a micro-/nano-level rough, rigid, and non-collagen exposed dentin surface was produced, the micro-tensile bond strength was maintained after aging under dry and wet bonding modes, and in situ zymography and nanoleakage within the hybrid layers presented lower signals after aging. Cell culture in vitro and a rabbit deep dentin adhesion model in vivo proved that this protocol is safe and biocompatible. Taken together, the concept of extrafibrillar demineralization is limited and insufficient to use in the clinic. The strategy of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion produces a bonding effect with reliability, durability, and safety.

CRISPR/Cas12a-assisted visible fluorescence for pseudo dual nucleic acid detection based on an integrated chip.

BACKGROUND: A false negative result is one of the major problems in nucleic acid detection. Failure to screen positive samples for pathogens or viruses poses a risk to public health. This situation will lead to more serious consequences for infectious pathogens or viruses. At present, the common solution is to introduce exogenous or endogenous internal control. Because it amplifies and is detected separately from the target gene, it cannot avoid false negative results caused by DNA extraction failure or reagent inactivation. There is an urgent need for a simple and reliable method to solve the false negative problem of nucleic acid detection. RESULTS: We established a chip and an on-chip detection method for the integrated detection of target genes and internal control using the CRISPR system in LAMP amplification products. The chip is processed from a low-cost PMMA board and has three chambers and some channels. After adding the sample, the chip only needs to be rotated twice, and the sample enters three chambers successively depending on its gravity for dual LAMP reaction and CRISPR detections. With a portable LED blue light exciter, visual fluorescence detection is realized. Whether the detection result is positive, negative, or invalid can be determined according to the fluorescence in the CRISPR chamber for target gene and CRISPR chamber for internal control. In this study, the detection of Salmonella enterica in Fenneropenaeus chinensis was taken as an example. The results showed good specificity and sensitivity. It could detect as low as 15 copies/µL of Salmonella enterica. SIGNIFICANCE: The on-chip detection solves the problem of aerosol contamination and false negative results. It has the advantages of high sensitivity, high specificity, high accuracy, and low cost. This research will advance the development of nucleic acid detection technology, providing a new and reliable strategy for POCT detection of pathogenic bacteria and viruses.