RESUMO
Semiconductor disk lasers can produce high output power and good beam quality simultaneously. The high intracavity circulating power of about hundreds of watts, along with the flexibility of tailorable emitting wavelengths, make it an attractive light source for obtaining ultraviolet (UV) radiation from near-infrared lasers through nonlinear frequency conversion. This work reports a frequency tripled 327â nm semiconductor disk laser with record output power and wavelength tuning range by using a type-I phase-matched LiB3O5 (LBO) crystal and a type-I phase-matched ß-BaB2O4 (BBO) crystal as the frequency-doubling and -tripling crystals respectively. Thanks to the obviously larger nonlinear coefficient of the type-I phase-matched BBO compared to the commonly used type-II phase-matched LBO, as well as the small spot size specifically designed at the crystal location, the maximum output power of UV lasers reaches 538â mW, corresponding to an optical-to-optical conversion efficiency from pump to UV laser of about 1.14%. A wavelength tuning range of about 8.6â nm and good power stability with a standard deviation of about 0.94 are also achieved.
RESUMO
Understanding the mechanism of mode-locking in a laser with high-order transverse mode is important for achieving an ultrashort pulses train under more complicated conditions. So far, mode-locking with high-order transverse mode has not been reported in other lasers except the multimode fiber laser. This paper demonstrates robust mode-locking with high-order transverse mode in a Kerr-lens mode-locked vertical-external-cavity surface-emitting laser for the first time, to the best of our knowledge. While the longitudinal modes are locked, continuous mode-locking accompanied by high-order transverse mode up to TEM40 is observed. The threshold of the mode-locking is only a little bigger than that of the lasing. After the laser oscillation is built up, the mode-locked pulse train can be obtained almost immediately and maintained until the thermal rollover of the laser. Output powers of 717 mW under fundamental mode and 666 mW under high-order transverse mode are achieved with a 4.3 ps pulse duration and 1.1 GHz pulses repetition rate, and some phenomenological explanations to the related characteristics of the mode-locked operation of high-order transverse mode in the vertical-external-cavity surface-emitting laser are proposed.
RESUMO
Advanced light sources in the blue-green band are crucial for underwater wireless optical communication (UWOC) systems. Vertical-external-cavity surface-emitting lasers (VECSELs) can produce high output power and good beam quality, making them suitable for UWOC. This paper presents a 108 m distance UWOC based on a 100 mW 490 nm blue VECSEL and an acousto-optic modulator (AOM). The high-quality beam, which is near diffraction-limited, undergoes relatively small optical attenuation when using a conventional avalanche photodiode (APD) as the detector and employing 64-pulse position modulation (PPM). At the time-slot frequency of 50 MHz, the bit error rate (BER) of the UWOC was 2.7 × 10-5. This is the first reported AOM-based UWOC system with a transmission distance over 100 m. The estimated maximum transmission distance may be improved to about 180 m by fully utilizing the detection accuracy of the APD according to the measured attenuation coefficient of the blue VECSEL used. This type of UWOC system, composed of a high-beam-quality light source and a conventional detector, make it more closely suited to practical applications.